Age | Commit message (Collapse) | Author |
|
input node.
|
|
Was using a bunch of different spellings, mostly "data-block" though, so went with that one (would have been my #1 choice anyway ;) )
|
|
|
|
|
|
This patch is another step to achieve BI and it's Viewport consistency for cubemap textures.
{F318879}
To test world_space_shading flag D2072 is required.
Alexander (Blend4Web Team)
Reviewers: campbellbarton, brecht
Subscribers: homyachetser, Evgeny_Rodygin, AlexKowel, yurikovelenov
Differential Revision: https://developer.blender.org/D2074
|
|
|
|
Glossy, Anisotropic and Glass BSDFs
This commit adds a new distribution to the Glossy, Anisotropic and Glass BSDFs that implements the
multiple-scattering microfacet model described in the paper "Multiple-Scattering Microfacet BSDFs with the Smith Model".
Essentially, the improvement is that unlike classical GGX, which only models single scattering and assumes
the contribution of multiple bounces to be zero, this new model performs a random walk on the microsurface until
the ray leaves it again, which ensures perfect energy conservation.
In practise, this means that the "darkening problem" - GGX materials becoming darker with increasing
roughness - is solved in a physically correct and efficient way.
The downside of this model is that it has no (known) analytic expression for evalation. However, it can be
evaluated stochastically, and although the correct PDF isn't known either, the properties of MIS and the
balance heuristic guarantee an unbiased result at the cost of slightly higher noise.
Reviewers: dingto, #cycles, brecht
Reviewed By: dingto, #cycles, brecht
Subscribers: bliblubli, ace_dragon, gregzaal, brecht, harvester, dingto, marcog, swerner, jtheninja, Blendify, nutel
Differential Revision: https://developer.blender.org/D2002
|
|
handling).
This commit changes a lot of how IDs are handled internally, especially the unlinking/freeing
processes. So far, this was very fuzy, to summarize cleanly deleting or replacing a datablock
was pretty much impossible, except for a few special cases.
Also, unlinking was handled by each datatype, in a rather messy and prone-to-errors way (quite
a few ID usages were missed or wrongly handled that way).
One of the main goal of id-remap branch was to cleanup this, and fatorize ID links handling
by using library_query utils to allow generic handling of those, which is now the case
(now, generic ID links handling is only "knwon" from readfile.c and library_query.c).
This commit also adds backends to allow live replacement and deletion of datablocks in Blender
(so-called 'remapping' process, where we replace all usages of a given ID pointer by a new one,
or NULL one in case of unlinking).
This will allow nice new features, like ability to easily reload or relocate libraries, real immediate
deletion of datablocks in blender, replacement of one datablock by another, etc.
Some of those are for next commits.
A word of warning: this commit is highly risky, because it affects potentially a lot in Blender core.
Though it was tested rather deeply, being totally impossible to check all possible ID usage cases,
it's likely there are some remaining issues and bugs in new code... Please report them! ;)
Review task: D2027 (https://developer.blender.org/D2027).
Reviewed by campbellbarton, thanks a bunch.
|
|
|
|
output in some situations
|
|
material use node groups
|
|
At the moment light shading in Blender is produced in viewspace. Apparently, that's why
shader nodes work with normals in camera space. But it is not convenient for artists.
The more convenient approach is implemented in Cycles where normals are represented in world space.
Blend4Web Team designed the engine keeping in mind shader parameters readability,
so normals are interpreted in world space as well. And now our users have to use some tweaks, like
empty node group with the name "Replace", which is replacing one input by another on the engine side
(replacing working configuration in Blender Viewport by the configuration that has the same behavior in the engine).
This patch adds the ability to switch to world space for normals and lamp vector in BI and Viewport.
This patch is very important to us and we crave to see this patch in Blender 2.7 because
it will significantly simplify Blend4Web material creation workflow.
{F315547}
{F315548}
Reviewers: campbellbarton, brecht
Reviewed By: brecht
Subscribers: homyachetser, Evgeny_Rodygin, AlexKowel, yurikovelenov
Differential Revision: https://developer.blender.org/D2046
|
|
This patch enables Tube, Sphere and Box projections in GLSL for the image texture node.
Reviewers: sergey
Projects: #nodes, #opengl_gfx
Differential Revision: https://developer.blender.org/D2036
|
|
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D2033
|
|
|
|
See T48453 for details and test scenes
Reviewers: a.romanov, sergey
Reviewed By: a.romanov, sergey
Projects: #opengl_gfx, #nodes
Differential Revision: https://developer.blender.org/D2011
|
|
The title says it all actually.
Added special custom data type, because we don't know in advance
whether we're referencing UV or Color layer. Also made it so vertex
attributes are normalized.
TODO: Border render in viewport ignores the normalization of the
attribute array for some reason, will be looked into still.
Reviewers: mont29, brecht, campbellbarton
Reviewed By: brecht, campbellbarton
Differential Revision: https://developer.blender.org/D2022
|
|
Only for non-OSX viewport!
|
|
|
|
This commit implements Bump node in GLSL, making it possible to
see previews of bump mapping in viewport without need to render.
Nothing really fancy going on here, just uses internal dFdx/dFdy
functions to get derivatives of the surface and map itself.
Quite basic but seems to behave correct-ish.
This commit also makes Displacement material output to affect
viewport shading by re-linking unconnected Normal input to a
node which was used for displacement output (via Bump node).
Intention of all this is to make it really easy to do bump map
painting with Cycles as an active render engine.
Reviewers: campbellbarton, mont29, brecht, psy-fi
Reviewed By: brecht
Subscribers: Blendify, eyecandy
Differential Revision: https://developer.blender.org/D2014
|
|
|
|
|
|
It gives some slight differences on the plane corners, but can't
really figure out source of the issue here yet.
It's still better than fully white texture for the previews anyway.
At this point we should perhaps ifdef chunks of the code in order
to have faster GLSL compilation and probably even faster compiled
code. Will look into this shortly.
|
|
|
|
|
|
|
|
|
|
|
|
animation
Not very efficient solution -- it'll update mapping node on init ntree exec and will
not work for viewport GLSL shading perhaps, but it's as good as it could be within
current dependency graph.
The issue here is that manual edit of values will cause cached matrix re-evaluation.
but using animation does not use rna update callbacks hence no matrix update was
happening.
|
|
|
|
|
|
Normal Map node support for GLSL mode and the internal render (multiple tangents support).
The Normal Map node is a useful node which is present in the Cycles render.
It makes it possible to use normal mapping without additional material node in a node tree.
This patch implements Normal Map node for GLSL mode and the internal render.
Previously only the active UV layer was used to calculate tangents.
|
|
- BKE_blender_version.h (only version defines & versionstr).
- BKE_blender_copybuffer.h (currently only used for view3d copy/paste).
- BKE_blender_undo.h (global undo functions).
- BKE_blendfile.h (high level blend file read/write API).
|
|
This reverts commit d91316dc672dc1ee69fbd24d2f00124a24b75c6b.
|
|
The improved Hosek / Wilkie model was added during my GSoC 2013 and the default since then.
The older model was kinda kept for compatibility, but after more than 2 years it's time to remove it.
The Hosek / Wilkie model is more realistic anyway, and people who really want a day / night transition can mix the Sky Shader with another one (e.g. color) and fade between the two.
|
|
This patch implements Mirror influence for environment textures. Approach matches the one from BI.
{F281871}
See the video https://youtu.be/BskgCv6dcIE
Example: {F281876}
Alexander (Blend4Web Team)
Reviewers: campbellbarton, merwin, brecht
Reviewed By: brecht
Subscribers: TwisterGE, blueprintrandom, youle, Evgeny_Rodygin, AlexKowel, yurikovelenov
Differential Revision: https://developer.blender.org/D1786
|
|
|
|
World space and view space normals were mixed up, we should only convert from
world to view space if a custom normal is connected, otherwise it is already in
view space.
|
|
The issue was happening when having unconnected point density which
will cache data but will not free it because there's no actual call
to the actual sampling.
Now the idea is to make sure cache is zeroed on file load and undo
and then caching via RNA will free the data if any exists. This could
leave us with a single copy of cache in the node if it's not used,
but it's quite small amount of memory and it's not leaking.
|
|
Based on an user feedback, previous implementation with providing
decoupled X and Y speeds didn't work in production at all: there
is no way to combine this speeds to an usable vector.
So now we're providing speed vector output instead, which provides
speed in an exactly the way Vector Blur node expects it to be:
first two components is a speed from the past, second two components
defines speed to the future.
Old behavior can be achieved by RGBA separating the speed output
and using first tow components.
Now this speed gives quite the same results as a speed pass, with
the only difference that track position speed uses "shutter" of
1 while pass uses shutter of 0.5 (and there's no way to affect on
that?).
|
|
Patch by Ralf Hölzemer.
|
|
|
|
|
|
|
|
|
|
|
|
The Vector Transform node is a useful node which is present in the Cycles renderer.
{F144283}
This patch implements the Vector Transform node for GLSL mode and the internal renderer.
Example: {F273060}
Alexander (Blend4Web Team)
Reviewers: brecht, campbellbarton, sergey
Reviewed By: campbellbarton, sergey
Subscribers: psy-fi, duarteframos, RobM, lightbwk, sergey, AlexKowel, valentin_b4w, Evgeny_Rodygin, yurikovelenov
Projects: #bf_blender:_next
Differential Revision: https://developer.blender.org/D909
|
|
|
|
This commit changes the way how we pass bounce information to the Light
Path node. Instead of manualy copying the bounces into ShaderData, we now
directly pass PathState. This reduces the arguments that we need to pass
around and also makes it easier to extend the feature.
This commit also exposes the Transmission Bounce Depth to the Light Path
node. It works similar to the Transparent Depth Output: Replace a
Transmission lightpath after X bounces with another shader, e.g a Diffuse
one. This can be used to avoid black surfaces, due to low amount of max
bounces.
Reviewed by Sergey and Brecht, thanks for some hlp with this.
I tested compilation and usage on CPU (SVM and OSL), CUDA, OpenCL Split
and Mega kernel. Hopefully this covers all devices. :)
|
|
While SCons building system was serving us really good for ages it's no longer
having much attention by the developers and started to become quite a difficult
task to maintain.
What's even worse -- there started to be quite serious divergence between SCons
and CMake which was only accumulating over the releases now. The fact that none
of the active developers are really using SCons and that our main studio is also
using CMake spotting bugs in the SCons builds became quite a difficult task and
we aren't always spotting them in time.
Meanwhile CMake became really mature building system which is available on every
platform we support and arguably it's also easier and more robust to use.
This commit includes:
- Removal of actual SCons building system
- Removal of SCons git submodule
- Removal of documentation which is stored in the sources and covers SCons
- Tweaks to the buildbot master to stop using SCons submodule
(this change requires deploying to the server)
- Tweaks to the install dependencies script to skip installing or mentioning
SCons building system
- Tweaks to various helper scripts to avoid mention of SCons folders/files
as well
Reviewers: mont29, dingto, dfelinto, lukastoenne, lukasstockner97, brecht, Severin, merwin, aligorith, psy-fi, campbellbarton, juicyfruit
Reviewed By: campbellbarton, juicyfruit
Differential Revision: https://developer.blender.org/D1680
|