| Age | Commit message (Collapse) | Author |
|---|
|
This is in fact very hairy situation here... Objects are only refcounted by scenes,
any other usage is 'free', which means once all object instanciations are gone Blender
considers it can delete it.
There is a trap here though: indirect usages. Typically, we should never modify linked data
(because it is essencially useless, changes would be ignored and ost on next reload or
even undo/redo). This means indirect usages are not affected by default 'safe' remapping/unlinking.
For unlinking preceeding deletion however, this is not acceptable - we are likely to end with
a zero-user ID (aka deletable one) which is still actually used by other linked data.
Solution choosen here is double:
I) From 'user-space' (i.e. outliner, operators...), we check for cases where deleting datablocks
should not be allowed (indirect data or indirectly used data), and abort (with report) if needed.
II) From 'lower' level (BKE_library_remap and RNA), we also unlink from linked data,
which makes actual deletion possible and safe.
Note that with previous behavior (2.77 one), linked object would be deleted, including from linked data -
but then, once file is saved and reloaded, indirect usage would link back the deleted object,
without any instanciation in scene, which made it somehow virtual and unreachable...
With new behavior, this is no more possible, but on the other hand it means that in situations of dependency cycles
(two linked objects using each other), linked objects become impossible to delete (from user space).
Not sure what's best here, behavior with those corner cases of library linking is very poorly defined... :(
|
|
|
|
|
|
Replaces `G.is_rendering` with `use_render_params` argument.
This is needed for Cycles, which attempts to restore render-preview settings from particles,
after it gets its own particle data, but fails to restore because
`G.is_rendering` was being checked in psys_cache_paths (and other places).
|
|
handling).
This commit changes a lot of how IDs are handled internally, especially the unlinking/freeing
processes. So far, this was very fuzy, to summarize cleanly deleting or replacing a datablock
was pretty much impossible, except for a few special cases.
Also, unlinking was handled by each datatype, in a rather messy and prone-to-errors way (quite
a few ID usages were missed or wrongly handled that way).
One of the main goal of id-remap branch was to cleanup this, and fatorize ID links handling
by using library_query utils to allow generic handling of those, which is now the case
(now, generic ID links handling is only "knwon" from readfile.c and library_query.c).
This commit also adds backends to allow live replacement and deletion of datablocks in Blender
(so-called 'remapping' process, where we replace all usages of a given ID pointer by a new one,
or NULL one in case of unlinking).
This will allow nice new features, like ability to easily reload or relocate libraries, real immediate
deletion of datablocks in blender, replacement of one datablock by another, etc.
Some of those are for next commits.
A word of warning: this commit is highly risky, because it affects potentially a lot in Blender core.
Though it was tested rather deeply, being totally impossible to check all possible ID usage cases,
it's likely there are some remaining issues and bugs in new code... Please report them! ;)
Review task: D2027 (https://developer.blender.org/D2027).
Reviewed by campbellbarton, thanks a bunch.
|
|
At the moment light shading in Blender is produced in viewspace. Apparently, that's why
shader nodes work with normals in camera space. But it is not convenient for artists.
The more convenient approach is implemented in Cycles where normals are represented in world space.
Blend4Web Team designed the engine keeping in mind shader parameters readability,
so normals are interpreted in world space as well. And now our users have to use some tweaks, like
empty node group with the name "Replace", which is replacing one input by another on the engine side
(replacing working configuration in Blender Viewport by the configuration that has the same behavior in the engine).
This patch adds the ability to switch to world space for normals and lamp vector in BI and Viewport.
This patch is very important to us and we crave to see this patch in Blender 2.7 because
it will significantly simplify Blend4Web material creation workflow.
{F315547}
{F315548}
Reviewers: campbellbarton, brecht
Reviewed By: brecht
Subscribers: homyachetser, Evgeny_Rodygin, AlexKowel, yurikovelenov
Differential Revision: https://developer.blender.org/D2046
|
|
not in front
The issue was caused by non-watertight nature of intersection, which is now addressed.
Hopefully it doesn't cause any regression caused by uninitialized precalculated storage.
|
|
loading in Blender.
Issue here is that for Blender, any pass which name starts with 'Diffuse' is considered
a diffuse pass - and it does not really support several passes of the same type in renderresult.
So for now, passtype_from_name() is now checking whether a pass of same type already exists
in render layers, and return 0 (uknown passtype) in this case.
|
|
|
|
|
|
Normal Map node support for GLSL mode and the internal render (multiple tangents support).
The Normal Map node is a useful node which is present in the Cycles render.
It makes it possible to use normal mapping without additional material node in a node tree.
This patch implements Normal Map node for GLSL mode and the internal render.
Previously only the active UV layer was used to calculate tangents.
|
|
|
|
There was some extra linearization happening in such cases.
|
|
It's not like every debug build is benefiting from this print..
|
|
|
|
This patch adds support for coloring point density textures based on several mesh vertex attributes.
* Vertex Color: Use a vertex color layer for coloring the point density texture
* Vertex Weight: Use a weights from a vertex group as intensity values. (for Blender Render engine the additional color band is used)
* Vertex Normals: Use object-space vertex normals as RGB values.
The vertex color source enum is stored separately from the particle color source, to avoid invalid values when switching.
Note that vertex colors are technically "corner colors" (MLoop), so each vertex can have as many colors as faces it is part of.
For the purpose of point density the mloop colors are simply averaged, which is physically plausible because corners can be viewed
as multiple points in the same location.
|
|
Useful when BLI_bvhtree_range_query callback calculates a new position to measure from.
|
|
|
|
This patch adds a new `falloff_type` ('Inverse Coefficients') for Lamps in
Blender-Internal and GLSL.
The current falloff modes use a formula like this inverse-square one:
`I = E × (D^2 / (D^2 + Q × r^2))`
While such a formula is simple for 3D-artists to use, it's algebraically
cumbersome to work with. Game-designers authoring their own shaders
could benefit much more by having direct control of falloff-coefficients:
`I = E × (1.0 / (coefC + coefL × r + coefQ × r^2))`
In this mode, the `distance` parameter is unused (except for 'Sphere'
mode); instead relying on the designer to mathematically-model the
falloff-behavior.
The UI has been patched like so:
{F153843}
Reviewers: brecht, psy-fi
Reviewed By: psy-fi
Subscribers: brita_, antidote, campbellbarton, psy-fi
Differential Revision: https://developer.blender.org/D1194
|
|
This reverts commit cd6442f7d4b56cb40102d86404fbaeae30dd2d32.
Broke workflow for incrementally saving versions of a render.
|
|
D1729 fixed 'View' projection but broke 'Equirectangular'.
This commit also changes equirectangular projection to match Cycles and the viewport.
|
|
This is a new option for panorama cameras to render
stereo that can be used in virtual reality devices
The option is available under the camera panel when Multi-View is enabled (Views option in the Render Layers panel)
Known limitations:
------------------
* Parallel convergence is not supported (you need to set a convergence distance really high to simulate this effect).
* Pivot was not supposed to affect the render but it does, this has to be looked at, but for now set it to CENTER
* Derivatives in perspective camera need to be pre-computed or we shuld get rid of kcam->dx/dy (Sergey words, I don't fully grasp the implication shere)
* This works in perspective mode and in panorama mode. However, for fully benefit from this effect in perspective mode you need to render a cube map. (there is an addon for this, developed separately, perhaps we could include it in master).
* We have no support for "neck distance" at the moment. This is supposed to help with objects at short distances.
* We have no support to rotate the "Up Axis" of the stereo plane. Meaning, we hardcode 0,0,1 as UP, and create the stereo pair related to that. (although we could take the camera local UP when rendering panoramas, this wouldn't work for perspective cameras.
* We have no support for interocular distance attenuation based on the proximity of the poles (which helps to reduce the pole rotation effect/artifact).
THIS NEEDS DOCS - both in 2.78 release log and the Blender manual.
Meanwhile you can read about it here: http://code.blender.org/2015/03/1451
This patch specifically dates from March 2015, as you can see in the code.blender.org post. Many thanks to all the reviewers, testers and minor sponsors who helped me maintain spherical-stereo for 1 year.
All that said, have fun with this. This feature was what got me started with Multi-View development (at the time what I was looking for was Fulldome stereo support, but the implementation is the same). In order to make this into Blender I had to make it aiming at a less-specic user-case Thus Multi-View started. (this was December 2012, during Siggraph Asia and a chat I had with Paul Bourke during the conference). I don't have the original patch anymore, but you can find a re-based version of it from March 2013, right before I start with the Multi-View project https://developer.blender.org/P332
Reviewers: sergey, dingto
Subscribers: #cycles
Differential Revision: https://developer.blender.org/D1223
|
|
Was printing to console, but UI didn't show error message.
|
|
|
|
Quite trivial idea -- just pass tread ID to the texture sampling function.
Implemented as a TLS to avoid passing huge amount of extra contexts around.
Should be working on all platforms, but compilation test is required.
Reviewers: juicyfruit, campbellbarton
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D1831
|
|
|
|
|
|
The issue was caused by some code accessing R from a functions which
are marked as safe for use from outside of render pipeline.
Now those functions are safe(er) for use.
|
|
|
|
|
|
|
|
|
|
|
|
Thanks Bastien for finding this out!
|
|
It should be all fine to sample same point density from multiple threads,
this is something what Blender Internal is doing actually.
|
|
The issue was happening when having unconnected point density which
will cache data but will not free it because there's no actual call
to the actual sampling.
Now the idea is to make sure cache is zeroed on file load and undo
and then caching via RNA will free the data if any exists. This could
leave us with a single copy of cache in the node if it's not used,
but it's quite small amount of memory and it's not leaking.
|
|
|
|
variables.
|
|
|
|
original mesh.
|
|
The differentials were incorrect, now they are properly transferred from the
low to the high poly mesh.
|
|
|
|
BKE_main_id_tag_/BKE_main_id_flag_ were horrible naming now that we split those
into flags (for presistent one) and tags (for runtime ones).
Got rid of previous 'tag_' functions behavior (those who were dedicated shortcuts
to set/clear LIB_TAG_DOIT), so now '_tag_' functions affect tags, and '_flag_'
functions affect flags.
|
|
|
|
|
|
Also remove null checks from args with non-null attribute.
|
|
|
|
rendered since opening
|
|
|
|
Failed reads didn't update the voxel 'ok' tag,
making successive reads fail (even on existing frames).
|
