Age | Commit message (Collapse) | Author |
|
Caused by NULL dereference of `Editing` before NULL check was done.
|
|
While this was not a critical issue (that lib pointer is only used for
some kind of sanity check that no linked data uses local ID pointers),
better to keep `IDP_BlendReadLib` in sync with all other lib-linking
code.
|
|
Instead of duplicating logic many times.
|
|
This was caused by strip content length and start position being
incorrect. Previously this was set from strip boundary by update
function, but it was removed.
Add back code to set effect strip start and length.
Previously content length was always 1 for effects, but now it must
correspond to strip length. Because of this workaround for speed effect
to get this apparent content length was removed.
|
|
Removes the following macros for scene/render frame values:
- `CFRA`
- `SUBFRA`
- `SFRA`
- `EFRA`
These macros don't add much, other than saving a few characters when typing.
It's not immediately clear what they refer to, they just hide what they
actually access. Just be explicit and clear about that.
Plus these macros gave read and write access to the variables, so eyesores like
this would be done (eyesore because it looks like assigning to a constant):
```
CFRA = some_frame_nbr;
```
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D15311
|
|
Commit 302b04a5a3fc introduced new retiming system, that unified sound
pitch animation with strip speed control. Because sound playback is
handled in different way, this did not work as expected and old files
were broken. In addition animation was not copied to new property.
Revert length position and offset handling for sound strips so their
position does not change and remap fcurves to new `speed_factor`
property.
|
|
|
|
Crash caused by `effect_seq->len` being 0, so frame map was not built.
Get length in timeline using handle positions.
|
|
|
|
Patch implements better way to control playback speed than it is
possible to do with speed effect. Speed factor property can be set in
Time panel.
There are 2 layers of control:
Option to retime movie to match scene FPS rate.
Custom speed factor to control playback rate.
Since playback rate is strip property, it is now possible to manipulate
strip as normal one even if it is retimed.
To facilitate manipulation, some functions need to consider speed factor
and apply necessary corrections to strip offset or strip start. These
corrections may need to be float numbers, so start and offsets must be
float as well.
Sound strips now use speed factor instead of pitch. This means, that
strips will change length to match usable length. In addition, it is
possible to group movie and sound strip and change speed of meta strip.
|
|
|
|
|
|
Caused by using `startdisp` and `enddisp` to initialize range.
Use handle position instead.
|
|
Use function `sequence_editor.display_stack(meta_strip)` to set
displayed timeline content.
To view top-level timeline, that does not belong to any meta strip, pass
`None` as argument.
Differential Revision: https://developer.blender.org/D12048
|
|
Function `SEQ_transform_handle_overlap` was declared in sequencer module
header file, but it was defined in editor/transform module.
Move definition to sequencer module.
|
|
Function `SEQ_transform_seqbase_shuffle_time` did not have access to
strip effects, and therefore could not handle their animation. Since
now transformation knows what strips can't be directly moved, but their
position depends on other strips, this collection of strips is passed as
argument, so animation can be offset correctly.
|
|
|
|
Caused by `seq_open_anim_file` early returning if anim struct exists,
exen if it's not initialized. To ensure `anim` struct is initialized
when `openfile` argument is true, don't do early return.
|
|
Length was set properly when added, but it was clamped by function
`seq_time_effect_range_set`
Add early return for generator effects where offsets can be used
normally.
|
|
Problem was caused by `startdisp` and `enddisp` still being used after changes
implemented in rB7afcfe111aac.
|
|
|
|
|
|
This patch makes it possible to manipulate strips without need to use
update functions to recalculate effect and meta strips.
Prior to this change function `SEQ_time_update_sequence` had to be used
to update mainly effects and meta strips. This was implemented in a way
that relied on sorted list of strips, which can't always be done and in
rare cases this approach failed.
In case of meta strips, `seqbase` had to be passed and compared with
"active" one to determine whether meta strip should be updated or not.
This is especially weak system that is prone to bugs when functions are
used by python API functions.
Finally, other strip types had startdisp` and `enddisp` fields updated
by this function and a lot of code relied on these fields even if strip
start, length and offsets are available. This is completely
unnecessary.
Implemented changes:
All effects and meta strips are updated when strip handles are moved or
strip is translated, without need to call any update function.
Function `SEQ_time_update_sequence` has been split to
`SEQ_time_update_meta_strip_range` and
`seq_time_update_effects_strip_range`. These functions should be only
used within sequencer module code. Meta update is used for versioning,
which is only reason for it not being declared internally.
Sequence fields `startdisp` and `enddisp` are now only used for
effects to store strip start and end points. These fields should be
used only internally within sequencer module code.
Use function `SEQ_time_*_handle_frame_get` to get strip start and end
points.
To update effects and meta strips with reasonable performance, cache
for "parent" meta strip and attached effects is added to
`SequenceLookup` cache, so it shares invalidation mechanisms.
All caches are populated during single iteration.
There should be no functional changes.
Differential Revision: https://developer.blender.org/D14990
|
|
|
|
Since adjustment layer is meant to replace original image, cross blend
mode is more optimal than alpha over. Same goes for multicam type.
|
|
|
|
To clarify term still frame: This is portion of strip that displays
static image. This area can exist before or after strip movie content.
Still frames were implemented as strip property, but this was never
displayed in panel. Only way to set still frames was to drag strip
handle with mouse or using python API. This would set either
`seq->*still` or `seq->*ofs` where * stands for `start` or `end`.
When strip had offset, it can't have still frames and vice versa, but
this had to be enforced in RNA functions and everywhere in code where
these fields are set directly. Strip can not have negative offset or
negative number of still frames.
This is not very practical approach and still frames can be simply
implemented as applying negative offset. Merging these offsets would
simplify offset calculations for example in D14962 and could make it
easier to also deprecate usage `seq->*disp` and necessity to call
update functions to recalculate strip boundaries.
For users only functional change is ability to set negative strip offset
using property in side panel.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D14976
|
|
|
|
Issue was caused by treating such strip as meta and using
`seq->channels` directly, which is not valid for scene strips.
Pointer to channels is now provided by function
`SEQ_get_seqbase_from_sequence`.
|
|
|
|
Leak was caused because output image buffer was initialized twice. Once
in speed effect strip and then by cross effect strip used for
interpolation feature.
|
|
Issue was not properly fixed in 3cef9ebaf81 due to oversight.
`SEQ_get_channels_by_seq` returned pointer to `seqbase` instead of `channels`.
|
|
When height is limited, it is defined by space occupied by strips,
but at least channels 1 to 7 will be always visible. This allows it to
easily overview timeline content by zooming out to maximum extent in Y
axis and panning in X axis.
More channels can be "created" on demand by moving strip to higher
channel. When strip is removed and highest channel becomes empty, view
will stay as is until it is moved down. Then new highest point is
remembered and it is not possible to pan upwards until strip is moved to
higher channel.
Limiting takes into account height of scrubbing and markers area as
well as scrollers. This means that when zoomed out to maximum extent,
no strips are obstructed by fixed UI element.
Fixes T57976
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D14263
|
|
This patch adds the drag and drop strip previews in the VSE.
It also adds two new functions to the drag and drop API.
1. "draw_in_view" for callbacks that wants to draw elements in local viewport coordinates
2. "on_drag_start" that can be used for prefetching data only once at the start of the drag.
Reviewed By: Julian, Campbell
Differential Revision: http://developer.blender.org/D14560
|
|
When handles are moved, job is created only for strips that need to
update first thumbnail.
ref T91618
|
|
Use `SEQ_relation_is_effect_of_strip` for checking effect-input
relationship where this is applicable.
|
|
Sometimes, when moving strip with 2 input effect attached and causing
strip overlap, this overlap is resolved incorrectly - too big offset
is applied. This is because effects are not taken into consideration
when "shuffeling" to resolve overlap.
To fix usual cases (transitions), overlap between strip and it's effect
is considered to be impossible.
There are edge cases, but these would be much more complicated to
implement and could have negative impact on performance.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D14578
|
|
This operator moves the view to show the selected visible strips.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D14222
|
|
Crash was caused by incorrectly assuming, that rendered strip is meta
when editing code in bulk, but this wasn't true and strip had no
channels initialized, which caused crash on NULL dereference.
Correct approach is to find list of channels where on same level as
rendered strip, similar to how `SEQ_get_seqbase_by_seq` function works
for list of strips.
|
|
|
|
Internally many offsets for BLF were integers but exposed as floats,
since these are used in pixel-space, many callers were converging them
back to integers. Simplify logic by using ints.
|
|
- Missing star prefix.
- Unnecessary indentation.
- Blank line after dot-points
(otherwise doxygen merges with the previous dot-point).
- Use back-slash for doxygen commands.
- Correct spelling.
|
|
|
|
Iterate over meta strip content and duplicate animation for all strips.
recursively.
|
|
Add flag `SEQ_IGNORE_CHANNEL_LOCK` to indicate, that channel lock
should not apply to strip. This flag must be cleared after
transformation.
|
|
|
|
Regression in [0] also skip creating a GSet when there are no F-curves.
[0]: e74420124f3a429ad8a1492e56a7e1561d86d6f7
|
|
|
|
Failing constraint test uncovered crashes on NULL dereference and
missing channels initialization in `SEQ_editing_ensure()`.
|
|
This patch adds channel region to VSE timeline area for drawing channel
headers. It is synchronizedwith timeline region. 3 basic features are
implemented - channel visibility, locking and name.
Channel data is stored in `SeqTimelineChannel` which can be top-level
owned by `Editing`, or it is owned by meta strip to support nesting.
Strip properties are completely independent and channel properties are
applied on top of particular strip property, thus overriding it.
Implementation is separate from channel regions in other editors. This
is mainly because style and topology is quite different in VSE. But
also code seems to be much more readable this way.
Currently channels use functions similar to VSE timeline to draw
background to provide illusion of transparency, but only for background
and sfra/efra regions.
Great portion of this patch is change from using strip visibility and
lock status to include channel state - this is facilitated by functions
`SEQ_transform_is_locked` and `SEQ_render_is_muted`
Originally this included changes in D14263, but patch was split for
easier review.
Reviewed By: fsiddi, Severin
Differential Revision: https://developer.blender.org/D13836
|