Age | Commit message (Collapse) | Author |
|
file I modified for the other patch. So I'm being bad and combining them
together.
First one is added -lXi to LLIBS for solaris. (Makes it so it compiles
again with the tablet stuff added)
Second one is the real commit its an expansion of patch #4458
This adds optional ICONV lining to support international fonts in the
file selector. Thanks to wisit venita (dripstone) I mostly just cleaned
it up a little and made it optional via defines.
Its currently turned off for all platforms except for solaris on scons.
For scons see your config/(platform).py file look for WITH_BF_ICONV
For the Makefiles look at source/nan_definitions.mk look for WITH_ICONV
(basically you'll want to export WITH_ICONV=true and possibly set some other
stuff)
Let me know if there are any problems.
Kent
--
mein@cs.umn.edu
|
|
- All code is in #ifdef ... #endif
- Only make build system is supported and you have to add:
export WITH_VERSE=true
to user-def.mk file
- Blender can share only mesh objects and bitmaps now
- More informations can be found at wiki:
http://mediawiki.blender.org/index.php/BlenderDev/VerseIntegrationToBlender
http://mediawiki.blender.org/index.php/BlenderDev/VerseIntegrationToBlenderUserDoc
I hope, that I didn't forget at anything
|
|
- Added a new Brush datablock, only used by image paint, but intended
to be used in texture paint, vertex paint, weight paint and sculpt
mode also.
- Being a datablock, these brushes can be saved, appended and linked.
They have a fake user by default, to make sure they are saved even if
not selected.
Image Painting:
- Replaced the img module with C code in imagepaint.c
- Airbrush is no longer a separate tool, but rather an option that can
be used for soften, smear and clone also.
- Blend modes mix, add, subtract, multiply, darken and lighten have been
added, code taken directly from vertex paint.
Note to project files maintainers:
- The img module was removed from SCons and Makefiles, and this should
be done in other build systems also. I'll wait to remove the module
from cvs, to not break compilation.
|
|
with NAN_FFMPEG_LIBS more general (i.e., not just for linux, and
moving some of the linux linking stuff to source/nan_definitions.mk).
|
|
* Large sequencer rewrite to support:
- Audio-tracks, which are not completely loaded into memory (hdaudio) but
kept on disk instead.
- A dependency tree, that builds only the Imbufs, that are really needed
- Cleaner sequencer code
- Per instance data in sequencer plugins (without this, the Dynamic
Noise Reduction plugin would be impossible)
- A Luma Waveform display
- A U/V scatter plot display
- Memcache limiting in sequencer
- Buttons changed according to the boosted framecount limit
|
|
A full detailed description of this will be done later... is several days
of work. Here's a summary:
Render:
- Full cleanup of render code, removing *all* globals and bad level calls
all over blender. Render module is now not called abusive anymore
- API-fied calls to rendering
- Full recode of internal render pipeline. Is now rendering tiles by
default, prepared for much smarter 'bucket' render later.
- Each thread now can render a full part
- Renders were tested with 4 threads, goes fine, apart from some lookup
tables in softshadow and AO still
- Rendering is prepared to do multiple layers and passes
- No single 32 bits trick in render code anymore, all 100% floats now.
Writing images/movies
- moved writing images to blender kernel (bye bye 'schrijfplaatje'!)
- made a new Movie handle system, also in kernel. This will enable much
easier use of movies in Blender
PreviewRender:
- Using new render API, previewrender (in buttons) now uses regular render
code to generate images.
- new datafile 'preview.blend.c' has the preview scenes in it
- previews get rendered in exact displayed size (1 pixel = 1 pixel)
3D Preview render
- new; press Pkey in 3d window, for a panel that continuously renders
(pkey is for games, i know... but we dont do that in orange now!)
- this render works nearly identical to buttons-preview render, so it stops
rendering on any event (mouse, keyboard, etc)
- on moving/scaling the panel, the render code doesn't recreate all geometry
- same for shifting/panning view
- all other operations (now) regenerate the full render database still.
- this is WIP... but big fun, especially for simple scenes!
Compositor
- Using same node system as now in use for shaders, you can composit images
- works pretty straightforward... needs much more options/tools and integration
with rendering still
- is not threaded yet, nor is so smart to only recalculate changes... will be
done soon!
- the "Render Result" node will get all layers/passes as output sockets
- The "Output" node renders to a builtin image, which you can view in the Image
window. (yes, output nodes to render-result, and to files, is on the list!)
The Bad News
- "Unified Render" is removed. It might come back in some stage, but this
system should be built from scratch. I can't really understand this code...
I expect it is not much needed, especially with advanced layer/passes
control
- Panorama render, Field render, Motion blur, is not coded yet... (I had to
recode every single feature in render, so...!)
- Lens Flare is also not back... needs total revision, might become composit
effect though (using zbuffer for visibility)
- Part render is gone! (well, thats obvious, its default now).
- The render window is only restored with limited functionality... I am going
to check first the option to render to a Image window, so Blender can become
a true single-window application. :)
For example, the 'Spare render buffer' (jkey) doesnt work.
- Render with border, now default creates a smaller image
- No zbuffers are written yet... on the todo!
- Scons files and MSVC will need work to get compiling again
OK... thats what I can quickly recall. Now go compiling!
|
|
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
|
|
Ton reviewed and gave his blessing.
Zr, can you have a look ?
see :
http://projects.blender.org/tracker/?func=detail&atid=127&aid=3039&group_id=9
for initial comments.
N_T : the solver itself (elbeem) needs some works to get rid of
warnings
|
|
To build with this option, set:
export NAN_TWEAK_MODE=true
|
|
did last friday. A patch will be available in the patches tracker
that will have the current stuff there until everything is working.
Kent
|
|
To enable it you will need to download OpenEXR and install it.
For the Makefiles you will need to set WITH_OPENEXR=true
and set NAN_OPENEXR to point to where OpenEXR is installed.
For scons you'll need to remove config.opts to get the new options
so you can enable OpenEXR, I was not able to get blender to link
with scons so the scons stuff may need to be tweaked a little but
I think it should work.
For other platform managers The OpenEXR stuff is similar to QUICKTIME
you need to define WITH_OPENEXR and setup the library stuff and
as you'll notice in this commit there are two extra files.
Kent
|
|
http://www.loria.fr/~levy/Galleries/LSCM/index.html
http://www.loria.fr/~levy/Papers/2002/s2002_lscm.pdf
Implementation Least Squares Conformal Maps parameterization, based on
chapter 2 of:
Bruno Levy, Sylvain Petitjean, Nicolas Ray, Jerome Maillot. Least Squares
Conformal Maps for Automatic Texture Atlas Generation. In Siggraph 2002,
July 2002.
Seams: Stored as a flag (ME_SEAM) in the new MEdge struct, these seams define
where a mesh will be cut when executing LSCM unwrapping. Seams can be marked
and cleared in Edit Mode. Ctrl+EKEY will pop up a menu allowing to Clear or Mark
the selected edges as seams.
Select Linked in Face Select Mode now only selects linked faces if no seams
separate them. So if seams are defined, this will now select the 'face group'
defined by the seams. Hotkey is still LKEY.
LSCM Unwrap: unwrap UV's by calculating a conformal mapping (preserving local
angles). Based on seams, the selected faces will be 'cut'. If multiple
'face groups' are selected, they will be unwrapped separately and packed in
the image rectangle in the UV Editor. Packing uses a simple and fast
algorithm, only designed to avoid having overlapping faces.
LSCM can be found in the Unwrap menu (UKEY), and the UV Calculation panel.
Pinning: UV's can be pinned in the UV Editor. When LSCM Unwrap is then
executed, these UV's will stay in place, allowing to tweak the solution.
PKEY and ALT+PKEY will respectively pin and unpin selected UV's.
Face Select Mode Drawing Changes:
- Draw Seams option to enable disable drawing of seams
- Draw Faces option to enable drawing of selected faces in transparent purple
- Draw Hidden Edges option to enable drawing of edges of hidden faces
- Draw Edges option to enable drawing of edges of visible faces
The colors for these seams, faces and edges are themeable.
|
|
|
|
Materials are exported the best we can do by now. It will look almost as in
blender except for the missing procedural textures and some minor issues.
You have to tweak normal modulation amount to get the desired result cause
is not the same in yafray.
We added a panel in render space to adjust some yafray settings (GI and so)
Also we export transparency and reflection using new raytracing settings,
but that will be changed and improved soon.
Remember that you have to set YFexport path in user defaults and yafray must
be on path (version 0.0.6)
We added the "yafray" button to activate all this stuff in the render window.
Panel and settings are only shown when checked.
So now when activated the code calls yafray export instead of the internal
renderer and finally the resulting image is loaded back into render window's
buffer. So animation is also possible and results can be saved using blender
usual scheme.
|
|
Updated the Make environment to point to the correct location. The include
paths were still pointing to source/blender/bpython/include while it should be
source/blender/python.
I did not encounter the build problems because I'm always working with the
autoconf build environment.
|
|
* moved references to libSDL out of ifeq($(INTERNATIONAL), true) (win32)
and ifeq($(WITH_FREETYPE2),true) (irix) conditionals in source/Makefile
* look for sdl in $(LCGDIR)/sdl if sdl-config isn't found
thanks to LarstiQ for doing most of the work
|
|
could find the SDL headers (SDL.h)
Kent
|
|
Kent
|
|
size of this;
Finally, the Sequencer audio support and global audio/animation sync stuff!
(See http://intrr.org/blender/audiosequencer.html)
Stuff that has been done:
./source/blender/blenloader/intern/writefile.c
./source/blender/blenloader/intern/readfile.c
Added code to make it handle sounds used by audio strips, and to convert
Scene data from older (<2.28) versions to init Scene global audio settings
(Scene->audio) to defaults.
./source/blender/include/BSE_seqaudio.h
./source/blender/src/seqaudio.c
The main audio routines that start/stop/scrub the audio stream at
a certain frame position, provide the frame reference for the current
stream position, mix the audio, convert the audio, mixdown the audio
into a file.
./source/blender/makesdna/DNA_sound_types.h
Introduced new variables in the bSound struct to accomodate the sample
data after converted to the scene's global mixing format (stream, streamlen).
Also added a new flag SOUND_FLAGS_SEQUENCE that gets set if the Sound
belongs to a sequence strip.
./source/blender/makesdna/DNA_scene_types.h
Added AudioData struct, which holds scene-global audio settings.
./source/blender/makesdna/DNA_sequence_types.h
Added support for audio strips. Some variables to hold Panning/Attenuation
information, position information, reference to the sample, and some flags.
./source/blender/makesdna/DNA_userdef_types.h
./source/blender/src/usiblender.c
Added a "Mixing buffer size" userpref. Made the versions stuff initialize
it to a default for versions <2.28.
./source/blender/makesdna/DNA_space_types.h
./source/blender/src/filesel.c
Added a Cyan dot to .WAV files. Any other suggestions on a better color? :)
./source/blender/src/editsound.c
Changes (fixes) to the WAV file loader, re-enabled some gameengine code that
is needed for dealing with bSounds and bSamples.
./source/blender/src/editipo.c
./source/blender/src/drawseq.c
./source/blender/src/editnla.c
./source/blender/src/space.c
./source/blender/src/drawview.c
./source/blender/src/renderwin.c
./source/blender/src/headerbuttons.c
- Created two different wrappers for update_for_newframe(), one which scrubs
the audio, one which doesn't.
- Replaced some of the occurences of update_for_newframe() with
update_for_newframe_muted(), which doesn't scrub the audio.
- In drawview.c: Changed the synchronization scheme to get the current audio
position from the audio engine, and use that as a reference for setting
CFRA. Implements a/v sync and framedrop.
- In editipo.c: Changed handling of Fac IPOs to be usable for audio strips as
volume envelopes.
- In space.c: Added the mixing buffer size Userpref, enabled audio scrubbing
(update_for_newframe()) for moving the sequence editor framebar.
./source/blender/src/editseq.c
Added support for audio strips and a default directory for WAV files which
gets saved from the last Shift-A operation.
./source/blender/src/buttons.c
Added Scene-global audio sequencer settings in Sound buttons.
./source/blender/src/sequence.c
Various stuff that deals with handling audio strips differently than
usual strips.
|
|
-- so that render.h from another package (such as the
Xrender extension on irix) doesn't conflict with the
blender one.
|
|
|
|
Removes ssl from blender.
makes the following directorys not needed anymore:
blender/intern/keymaker
blender/source/blender/src/pub
blender/source/blender/encrypt
blender/source/blender/decrypt
blender/source/blender/sign
blender/source/blender/verify
It works with The Nan Makefiles and autoconf, could whoever is working
on the other build systems update them so we can nuke those directorys?
They won't do anything but I figured I'd leave them in for a week or so
to make things easyer on people.
Kent
|
|
I've modified things so it nolonger uses the stuff in
blender/source/blender/verify
This should be working for both the old Makefiles and the autoconf stuff.
People working with other build systems please update them,
both blender/source/blender/verify and sign will be going away soon.
(Next step is to get rid of blender/intern/keymaker)
Kent
|
|
|
|
#include <QuickTime/Movies.h> instead of #include <Movies.h> on OS X to
avoid having to specify the full path to the QT headers in the Makefiles
#undef NDEBUG on OS X to avoid errors about ID being declared twice
enable support for QuickTime in the original Makefiles on OS X
|
|
|
|
|
|
Probably can just remove the lines from these files but ohh well :)
Kent
|
|
|
|
Maarten
|
|
|