| Age | Commit message (Collapse) | Author |
|---|
|
Render:
- New; support for dual CPU render (SDL thread)
Currently only works with alternating scanlines, but gives excellent
performance. For both normal render as unified implemented.
Note the "mutex" locks on z-transp buffer render and imbuf loads.
- This has been made possible by major cleanups in render code, especially
getting rid of globals (example Tin Tr Tg Tb Ta for textures) or struct
OSA or using Materials or Texture data to write to.
- Made normal render fully 4x32 floats too, and removed all old optimizes
with chars or shorts.
- Made normal render and unified render use same code for sky and halo
render, giving equal (and better) results for halo render. Old render
now also uses PostProcess options (brightness, mul, gamma)
- Added option ("FBuf") in F10 Output Panel, this keeps a 4x32 bits buffer
after render. Using PostProcess menu you will note an immediate re-
display of image too (32 bits RGBA)
- Added "Hue" and "Saturation" sliders to PostProcess options
- Render module is still not having a "nice" API, but amount of dependencies
went down a lot. Next todo: remove abusive "previewrender" code.
The last main global in Render (struct Render) now can be re-used for fully
controlling a render, to allow multiple "instances" of render to open.
- Renderwindow now displays a smal bar on top with the stats, and keeps the
stats after render too. Including "spare" page support.
Not only easier visible that way, but also to remove the awkward code that
was drawing stats in the Info header (extreme slow on some ATIs too)
- Cleaned up blendef.h and BKE_utildefines.h, these two had overlapping
defines.
- I might have forgotten stuff... and will write a nice doc on the architecture!
|
|
|
|
|
|
Blender ALT+Z drawmode didnt support quad lights.
|
|
Objects with negative scale draw TFaces front/back inverted in FaceSelect
mode. Added same solution as 2 releases before for Solid draw mode.
|
|
draw shadeless
- buttons for physics in Material menu lined up
|
|
for our interactive 3d artists!
- AL+Z (potato) texture view now draws objects without Texture Faces
compliant with (new) default in engine. Meaning lit faces, using
Material RGB for diffuse and specular. It used to draw these as 'shaded'
which is quite useless.
Per definition, Potato mode is supposed to show what engine draws.
(Note; this only for Mesh objects)
- Added a couple of more calls to ensure Shaded drawmode updates on
changing RGB sliders, moving lamps to layers, or switch layers
This based on feedback from Mal, who'll also give it all good tests.
|
|
- edges now sample on three locationsm gives more hits
- own version of glPolygonOffset remains cumbersome... but for select
now the selection routine gets more offset than draw.
- first attempt to clean drawobject.c and displists
- generic call for draw object in backbuf for select purposes, cleans up
a lot in the other calls.
- also to verify if we can (in future) use this for vertex/edge/face
select, but the whole drawobject code works against me... this is
for another refactory (incl. displist) and out of the focus for now
- subsurf.c: now creates new faces in order of original. Not used yet, but is
handy to recover the original order for selection/paint purposes.
|
|
- Zbuffer clipped selection
Based on same algos as for drawing (blender polygon offset) vertices, edges
and faces now are clipped for draw and selection when Zbuffer is used.
Note that it works for endpoint vertices of edges, and for facecenters.
Also works for border and circle-select
- Optimal draw subsurfs
This now draws optimal with faces and edges selected/unselected, hiding the
original 'cage' (mesh) completely.
TODO: edge select, which still uses original (invisible) edge.
http://www.blender3d.org/cms/Mesh_editing_rewrite.425.0.html
|
|
- new submodule Scene.Radio, for radiosity: still incomplete, but in shape for demos, updated SConscript to include it;
- new functions in Window module;
- doc updates: adding a todo file and a new start page for our docs: API_intro.py + other updates;
- small fix in Ipo.c provided by Damien McGuinnes (thanks!): Nathan has a patch with IPO additions and fixes for this and more, but until it is committed, there's this fix for Ipo.getCurve('LocX'), LocY, Z and QuatW,X,Y,Z too, according to Damien.
Other files:
- radpreprocess.c: added check for "during_script()" so eventual msgs don't popup during scripts;
- drawmesh.c: made a pointer (display list) be checked before accessed, fixes crash in scripts that forget to update display lists for subsurf meshes when a 3d view is in textured view mode.
Script: updated bevel_center by Loic Berthe.
|
|
glGenTexturesEXT(1, &bind); // produces bind == 0
while:
glGenTextures(1, &bind); // produces bind correctly.
(Ported from tuhopuu2)
|
|
http://www.loria.fr/~levy/Galleries/LSCM/index.html
http://www.loria.fr/~levy/Papers/2002/s2002_lscm.pdf
Implementation Least Squares Conformal Maps parameterization, based on
chapter 2 of:
Bruno Levy, Sylvain Petitjean, Nicolas Ray, Jerome Maillot. Least Squares
Conformal Maps for Automatic Texture Atlas Generation. In Siggraph 2002,
July 2002.
Seams: Stored as a flag (ME_SEAM) in the new MEdge struct, these seams define
where a mesh will be cut when executing LSCM unwrapping. Seams can be marked
and cleared in Edit Mode. Ctrl+EKEY will pop up a menu allowing to Clear or Mark
the selected edges as seams.
Select Linked in Face Select Mode now only selects linked faces if no seams
separate them. So if seams are defined, this will now select the 'face group'
defined by the seams. Hotkey is still LKEY.
LSCM Unwrap: unwrap UV's by calculating a conformal mapping (preserving local
angles). Based on seams, the selected faces will be 'cut'. If multiple
'face groups' are selected, they will be unwrapped separately and packed in
the image rectangle in the UV Editor. Packing uses a simple and fast
algorithm, only designed to avoid having overlapping faces.
LSCM can be found in the Unwrap menu (UKEY), and the UV Calculation panel.
Pinning: UV's can be pinned in the UV Editor. When LSCM Unwrap is then
executed, these UV's will stay in place, allowing to tweak the solution.
PKEY and ALT+PKEY will respectively pin and unpin selected UV's.
Face Select Mode Drawing Changes:
- Draw Seams option to enable disable drawing of seams
- Draw Faces option to enable drawing of selected faces in transparent purple
- Draw Hidden Edges option to enable drawing of edges of hidden faces
- Draw Edges option to enable drawing of edges of visible faces
The colors for these seams, faces and edges are themeable.
|
|
Edges in Mesh
- adds automatic when you use creases. For other situations; call the
void make_edges(Mesh *me) in mesh.c. Of course, once in editmode the
edges are automatically recreated.
- in F9 buttons you can add/remove edges too
- both for Mesh and DisplistMesh, so it speeds up drawing quite some in
wireframe
- render for edges can't work... edges have no material nor tface nor col..
so here still the faces are rendered in wire
Creases in Subsurf
- based on the code by Chris McFarlen
- main changes is that now edges are used, saving quite some data in file
- use SHIFT+E in editmode to set edges-sharpness. values go from 0-1
- in F9 buttons you can set draw-crease mode. It draws now blended from
wire color to edge-select color (as provided in Theme)
Known issue: setting sharpness on 1 cube (subdiv 2) gives weird results
with some values... Chris, can you check?
Further; code cleanups, changing 0 in NULL when needed, no warnings, etc etc
|
|
This is supposed to fix gradual slowdown of Blender interface on ATI cards.
|
|
Sample file showed UV-textured Subsurf, in 'Potato' texture view. When
separating part of it in editmode, a null pointer was referenced in
drawing code.
|
|
multiple functions and partially recoded. Because now all the uv mapping
settings are accessible throught the panel, no popus will be shown when
pressing 'U' to unwrap faces in face select mode. Also From Window to Cylinder
and From Window to Shpere became obsolete, as you can set this in the new
panel.
The panel contains buttons for all the existing uv mapping modes, and the
following settings:
- Cube size: For Cubical unwrapping.
- Radius: Radius for Cylindrical unwrapping.
- View Aligns Face, View Aligns Top, Align to Object: For Cylinder and Shpere.
Respectively means you are in front of the Cylinder/Sphere, look through the
Cylinder, or use the object rotation to determine how the cylinder is
positioned (old Cylindrical unwrapping).
- Polar XZ, Polar XY: With 'View Aligns Top' enabled, defines at which polar
you are looking.
- No Edges, Draw Edges, All Edges: Draw no edges, draw edges z-buffered on top,
draw all edges, without depth test.
All credits for this part (and also at least half of the other UV editor
improvements) go to Jens Ole Wund aka "bjornmose".
|
|
- Draw Faces in the UV editor
- Draw Faces, selected in the UV editor, in the 3D view
- Draw Shadow Mesh in the UV editor (for faces unselected in the 3D view)
- Select Linked UVs (LKEY)
- Unlink Selection (Alt+LKEY)
- Stick (Local) UVs to Mesh Vertex on selection
- Active Face Select
- Reload Image
- Show / Hide Faces in the UV editor (H, Shift+H, Alt+H)
- Proportional Editing (O, Shift+O)
- Stitch, Limit Stitch UVs (snap by mesh vertex)
- Weld / Align UVs (WKEY)
- UVs Snap to Pixels on/off switch
- RMB in Texture Paint or Vertex Paint mode picks color
- Select Inverse in Faceselect mode
I hope these are all the features that were commited. The new UV Mapping
panel (and code) will follow later.
|
|
(MVert,MFace,etc) off into DNA_meshdata_types.h, to isolate areas
of source that actually edit mesh *data* vs. areas that just edit
mesh object information.
|
|
|
|
of zr). This struct was never written to file and the new 'int based'
MFace can be used in it's place. Some removal of redundant code could
perhaps be done now (I didn't do any though, just "s/MFaceInt/MFace/").
|
|
were all the same and make sure all platforms see them.
Kent
|
|
- while Faceselect mode on Subsurf, it didnt render the changes. this was
because the displaylist wasnt updated (the 3d window shows original mesh)
- added proper redraw event for F10-sound buttons when you add a new sound.
somehow sound doesnt play anymore here... have to check further.
|
|
colors. This because of the pretty weird (ab)use of load & make editmesh...
For each added undo step, the load_editmesh was fed with an empty mesh
to assign data to, without knowledge of what was in the original mesh.
That way UV and color data got lost.
Solved it in 2 steps:
1. removing the ->tface pointer from EditVlak, and make TFace a builtin
struct inside EditVlak. This didnt cost much extra mem, since it already
stored UV and color. This enabled some pretty cleanup in editmesh.c as
well, storing tface pointers was cumbersome.
2. for each undo step, it then generates always a tface and mcol block to
link to the undo Mesh.
Even when it wasn't in the actual Mesh, at exit editmode the original
Mesh is used as reference anyway, and undo-meshes are freed correctly.
The enormous commit is because I had to change the BLI_editVert.h file, and
found it was included in about every file unnecessary. I removed it there.
ALso found out that subsurf has code ready (unfinished) to make UV coords for
the displaylist in EditMode as well, nice to know for later...
|
|
- with mouse in Panel, padplus/minus defines scaling of Panel... dunno if
this is the correct key. thats for later to worry!
Forgot to mention in previous commit:
- Panels now have a uiSetPanelStyle() API call. Is under construction...
now for test purposes mostly.
|
|
|
|
#ifdef HAVE_CONFIG_H
#include <config.h>
#endif
Just need to finish cpp files now :)
Kent
--
mein@cs.umn.edu
|
|
|
