| Age | Commit message (Collapse) | Author |
|---|
|
- Curve Join now moves all curves to 2D (if its 2D)
- FGon extrude keeps FGon flags correctly
- After Append undo-push added
- In almost all Ipo editing commands; undo-push added
- Icons in outliner now all consistant grey
- Zoffs button had to 20 high (hmetal :)
|
|
- crash when converting nurbs->bezier, with nurbs having <3 points
- copying audio strips in sequencer didnt increase ipo user counter
|
|
wasn't restored on undo.
|
|
The changelog is very long... it's on the web too:
http://www.blender3d.org/cms/Mesh_editing_rewrite.425.0.html
EditMesh refactor notes (user)
**** New selection modes
When entering Edit Mode for a Mesh, you now have the choice for three selection modes. These are shown as icons in the 3D header (hotkey is being searched for!).
- Vertex Select
Select vertices as usual, fully compatible with how previous version work
- Edge Select
Vertices are not drawn anymore, and selections happen by default on the edges. It is a true edge select, meaning that you can select three out of four edges in a face, without automatic having the 4th edge selected.
- Face Select
Instead of vertices, now selection 'points' are drawn in the face centers. Selected faces also get a colored outline, like for edges. This also is true face select, for each face individual regardless selection status of its vertices or edges.
While holding SHIFT, and press a selection mode, you can also combine the above choices. Now selection becomes mixed, and will behave as expected.
For example; in Edge+Face select mode, selecting the 4 edges of a face will select the face too.
The selection modes and optional drawing modes (like transparant faces, normals, or solid drawing) all work together. All of Blender's mesh editing tools now react to the correct selection mode as well.
Most noticeable it's in:
**** Extrude
Extruding in Edge or Face Select mode allows much more precise control over what's extruded and what should be excluded. Try for example a checker pattern selection, and extrude it.
New is the fixed translation when faces are extruded. This always follows the (averaged) face normal(s) of the old face(s), enabling much easier working in 3D views . A single 'G' (Grab) or 'R' (Rotate) or 'S' (Scale) will change transform modus as usual.
**** Other things to note
- Hiding edges/faces will also behave different based on Select Mode.
- while editing, normals of faces are updated always now
- Border select (BKEY) has 2 different rules for edges; when one edge is fully inside of the border, it will only select edges that are fully inside. Otherwise it selects each edge intersecting with the border.
- in face mode, adding vertices, edges or a circle is invisible...
- "Add monkey" now works as a normal primitive (rotated and on 3d cursor)
- Mesh undo was fully recoded, hopefully solving issues now with Vertex Keys and Groups
- Going in and out of editmode was fully recoded. Especially on larger models you'll notice substantial speed gain.
**** Todo
Add 'FaceSelect mode' functionality in EditMode, including zbuffered selection, display and editing of UV texture.
EditMesh refactor notes (coder)
**** Usage of flags in general
The "->f" flags are reserved for the editmesh.c and editmesh_lib.c core functions. Actually only selection status is there now.
The "->f1" and "->f2" flags are free to use. They're available in vertex/edge/face structs. Since they're free, check carefully when calling other functions that use these flags... for example extrude() or subdivide() use them.
**** Selection flags
EditVert: eve->f & SELECT
EditEdge: eed->f & SELECT
EditFace: efa->f & SELECT
- Selection is only possible when not-hidden!
- Selection flags are always up-to-date, BUT:
if selection mode >= SELECT_EDGE vertex selection flags can be incorrect
if selection mode == SELECT_FACE vertex/edge selection flags can be incorrect
This because of shared vertices or edges.
- use for selecting vertices:
eve->f &= SELECT
- use for selecting edges always:
void EM_select_edge(eed, 1) // 1 = select, 0 = deselect
- use for selecting faces always:
void EM_select_face(efa, 1) // 1 = select, 0 = deselect
- To set the 'f' flags in all of the data:
void EM_set_flag_all(int flag);
void EM_clear_flag_all(int flag);
- the old faceselectedOR() and faceselectedAND() are still there, but only
to be used for evaluating its vertices
**** Code hints for handling selection
If the selectmode is 'face'; vertex or edge selections need to be flushed upward. Same is true for 'edge' selection mode. This means that you'll have to keep track of all selections while coding... selecting the four vertices in a face doesn't automatically select the face anymore.
However, by using the above calls, at least selections flush downward (to vertex level). You then can call:
void EM_selectmode_flush(void);
Which flushes selections back upward, based on the selectmode setting. This function does the following:
- if selectmode 'vertex': select edges/faces based on its selected vertices
- if selectmode 'edge': select faces based its selected edges
This works fine in nice controlled situations.
However, only changing the vertex selections then still doesn't select a face in face mode! If you really can't avoid only working with vertex selections, you can use this call:
void EM_select_flush(void);
Now selection is flushed upward regardless current selectmode. That can be destructive for special cases however, like checkerboard selected faces. So use this only when you know everything else was deselected (or deselect it). Example: adding primitives.
**** Hide flags
EditVert: eve->h
EditEdge: eed->h
EditFace: efa->h
- all hide flags are always up-to-date
- hidden vertices/edges/faces are always deselected. so when you operate on selection only, there's no need to check for hide flag.
**** Unified undo for editmode
New file: editmode_undo.h
A pretty nice function pointer handler style undo. Just code three functions, and your undo will fly! The c file has a good reference.
Also note that the old undo system has been replaced. It currently uses minimal dependencies on Meshes themselves (no abuse of going in/out editmode), and is restricted nicely to editmode functions.
**** Going in/out editmode
As speedup now all vertices/faces/edges are allocated in three big chunks. In vertices/faces/edges now tags are set to denote such data cannot be freed.
ALso the hashtable (lookup) for edges uses no mallocs at all anymore, but is part of the EditEdge itself.
|
|
1) Curve deform
http://www.blender3d.org/cms/Curve_Deform.392.0.html
Works simple as expected, but keep track of the rotation axis
in F7 buttons (Track X Y Z)
Only Mesh deform supported now.
Code changes:
- centralized deformation calls in curve_modifiers() mesh_modifiers()
etcetera. Here also other effects can be added like wave. Now the
evaluation order is fixed, but should become optional. It also doesnt
use the Displist anymore as deform-input. That latter part is unfinished
yet.
This code also is used for Hooks and will be needed for softbody
- made convention stricter that displists are being checked on in
drawobject(), this to prevent routines to make new displists recursively
(like armature does). Now a freedisplist() is sufficient to signal that
a new displaylist should be made.
2) Object Hooks
http://www.blender3d.org/cms/Object_Hooks.391.0.html
Support for Hooks is added to Mesh, Lattice, Curve and Surface objects.
For Armatures this would require some more work & research.
Main goal for this feature is to provide quick & simple access to the
underlying geometry in Objects on Object level, supporting hierarchies and
Ipos etc.
|
|
separate it...
1) Curve/Surface editmode undo
Uses same syntax as mesh undo, so simple to integrate. Edit-curve data is
also quite simpler, so no need for any hack at all.
It re-uses the undo system from next point, which is nice short & clean
local code
2) Framework for global undo
The undo calls themselves are commented out. In a next commit I want to
enable it for a couple of main features, for further feedback.
The speed goes surprisingly well, especially with this new version that
'pushes' undo after a command, ensuring interactivity isnt frustrated
3) framework for texture based icons in Blender
Not activated code, but tested here. Part of 2.3 UI project.
btw: Johnny Matthews will assist in (and complete) the undo project
|
|
the correct math for it, works like a charm
|
|
Edges in Mesh
- adds automatic when you use creases. For other situations; call the
void make_edges(Mesh *me) in mesh.c. Of course, once in editmode the
edges are automatically recreated.
- in F9 buttons you can add/remove edges too
- both for Mesh and DisplistMesh, so it speeds up drawing quite some in
wireframe
- render for edges can't work... edges have no material nor tface nor col..
so here still the faces are rendered in wire
Creases in Subsurf
- based on the code by Chris McFarlen
- main changes is that now edges are used, saving quite some data in file
- use SHIFT+E in editmode to set edges-sharpness. values go from 0-1
- in F9 buttons you can set draw-crease mode. It draws now blended from
wire color to edge-select color (as provided in Theme)
Known issue: setting sharpness on 1 cube (subdiv 2) gives weird results
with some values... Chris, can you check?
Further; code cleanups, changing 0 in NULL when needed, no warnings, etc etc
|
|
messages and pupmenu()s. Edited spelling and grammar,
stylistic consistency, etc.
I added the guidelines and rationale that I used to the
CMS here:
http://www.blender3d.org/cms/Language_and_terminology.338.0.html
Next step is to get icons in there, to make it easier to see
at a glance what sort of message (and how much attention
should be paid to it, or if it can be dismissed with a flick
of the mouse, eg. boring remove doubles notifications)
mockup: http://mke3.net:9000/blender/ui/controls/error_ok_icons.png
|
|
When editing a Curve object, type Poly, some code still thought it was
a Nurbs instead, doing nasty stuff with knots arrays.
Also fixed redraw events for buttons while editing Curve, this wasn't
done properly at all, causing the UI showing non-existant data...
|
|
When joining 2 unconnected control points in Curve/Surface (FKEY) Blender
crashed.
Was just assuming in this code that a knots vector array was there...
simple fix!
BTW: I think Theeth discovered here the oldest Blender ever, I could
track it back to old Traces code from 1992. :)
|
|
colors. This because of the pretty weird (ab)use of load & make editmesh...
For each added undo step, the load_editmesh was fed with an empty mesh
to assign data to, without knowledge of what was in the original mesh.
That way UV and color data got lost.
Solved it in 2 steps:
1. removing the ->tface pointer from EditVlak, and make TFace a builtin
struct inside EditVlak. This didnt cost much extra mem, since it already
stored UV and color. This enabled some pretty cleanup in editmesh.c as
well, storing tface pointers was cumbersome.
2. for each undo step, it then generates always a tface and mcol block to
link to the undo Mesh.
Even when it wasn't in the actual Mesh, at exit editmode the original
Mesh is used as reference anyway, and undo-meshes are freed correctly.
The enormous commit is because I had to change the BLI_editVert.h file, and
found it was included in about every file unnecessary. I removed it there.
ALso found out that subsurf has code ready (unfinished) to make UV coords for
the displaylist in EditMode as well, nice to know for later...
|
|
I had to clean up very old calls to switch matrices for 3d windows.
To make it more clear, I've introduced defines for the infamous persp()
function:
persp(PERSP_WIN); sets matrices at pixel level window
persp(PERSP_VIEW); restores matrices back to 3d drawing
persp(PERSP_STORE); only called once, to store correct matrices
I will now check on frontbuffer drawing of vertices... it's very doubtful
if it's used still correctly, was only meant for visual speed in the
early nineties you know. :)
|
|
include only (use BIF_interface.h instead)
- split up interface.c in two files: NEW: interface_panel.c
- removed the temporal text files
WARN: FIX AUTOMAKE AND MSVC!
|
|
leftmost/top panel now always at same location, so switching button
'main contextes' works consistantly
- fixed some more events to make sure Panels update when editing
- preview render panel now is 320 wide, just for getting the space filled!
- error in preview render matrix, which caused unpredictable drawing errors
Bedtime!
-Ton-
|
|
- removed src/buttons.c and include/BIF_buttons.h
- added src/buttons.txt, which is the old buttons.c for review and adding
code to new panels structure
- changed internal events to match new buttonspace structure
- added tabs for new shading group of buttons
- removed loads of little warnings, -Wall now compiles src/ almost without
error (hint: setenv NAN_QUIET to see it all better)
Now I'm ready to do actual buttons -> panels conversion. I will do the raw
versions first, others then can cleanup
|
|
when trying tio shear/warp not visible objects. (thanks Matt)
|
|
big thanks to broken !
|
|
|
|
http://projects.blender.org/tracker/index.php?func=detail&aid=100&group_id=9&atid=127
|
|
#ifdef HAVE_CONFIG_H
#include <config.h>
#endif
Just need to finish cpp files now :)
Kent
--
mein@cs.umn.edu
|
|
|
