| Age | Commit message (Collapse) | Author |
|---|
|
This is the unification of all overlays into one overlay engine as described in T65347.
I went over all the code making it more future proof with less hacks and removing old / not relevent parts.
Goals / Acheivements:
- Remove internal shader usage (only drw shaders)
- Remove viewportSize and viewportSizeInv and put them in gloabl ubo
- Fixed some drawing issues: Missing probe option and Missing Alt+B clipping of some shader
- Remove old (legacy) shaders dependancy (not using view UBO).
- Less shader variation (less compilation time at first load and less patching needed for vulkan)
- removed some geom shaders when I could
- Remove static e_data (except shaders storage where it is OK)
- Clear the way to fix some anoying limitations (dithered transparency, background image compositing etc...)
- Wireframe drawing now uses the same batching capabilities as workbench & eevee (indirect drawing).
- Reduced complexity, removed ~3000 Lines of code in draw (also removed a lot of unused shader in GPU).
- Post AA to avoid complexity and cost of MSAA.
Remaining issues:
- ~~Armature edits, overlay toggles, (... others?) are not refreshing viewport after AA is complete~~
- FXAA is not the best for wires, maybe investigate SMAA
- Maybe do something more temporally stable for AA.
- ~~Paint overlays are not working with AA.~~
- ~~infront objects are difficult to select.~~
- ~~the infront wires sometimes goes through they solid counterpart (missing clear maybe?) (toggle overlays on-off when using infront+wireframe overlay in solid shading)~~
Note: I made some decision to change slightly the appearance of some objects to simplify their drawing. Namely the empty arrows end (which is now hollow/wire) and distance points of the cameras/spots being done by lines.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6296
|
|
This is a revert of a small fraction of commit rB5e332fd700
that introduced the issue according to bisect.
Doing a break here is wrong, because BKE_crazyspace_build_sculpt
assumes that processing stopped at the first deform modifier
without deformMatrices, and thus skips all modifiers until it
finds one like that. Thus this early loop exit makes the behavior
worse, as instead of skipping just Mask and Mirror, it skips all.
|
|
When the frame was zero, the frame number was clamped by error to 1.
|
|
The thickness was using the object scale always, but when the layer is parented, must use the parented object scale.
|
|
|
|
Instead of having the option to show marker lines,
make the marker region optional.
- Added a Show Markers entry in the View menu of the animation editors.
- If the markers region is not active then the Marker menu gets hidden.
- Removed marker menu from the driver editor
and don't allow to use marker operators.
|
|
|
|
|
|
This is a partial rollback of f18ad385dffe70f5e57df00ff9bbb7b42fa05be0. It
turned out to be more tricky to determine animatedness of an object.
This fixes T71986.
|
|
When the final stroke was smaller than original stroke, the weights array must be resized, but by error the function used the original stroke pointer instead of the new stroke pointer and this corrupted the pointers.
|
|
Occurs in edit mode when object has no uniform scale.
|
|
Loading a blendfile allocates one or more windows that need to be freed.
Freeing those windows also calls `BKE_workspace_instance_hook_free()` to
free workspaces. However, in the `BlendfileLoadingBaseTest` test there are
no workspaces allocated. This caused an assertion failure, which was worked
around by not asserting when Blender is running in background mode.
Reviewed by @Severin via pair programming
|
|
Currently unused, but needed for coming fix.
|
|
|
|
It started to be a long code of all various cases in a single file,
which started to be really confusing.
|
|
C++ is used more and more, and it is becoming more and more annoying to
keep track of whether header have C++ guard or not.
Is easier and more clear to be consistent in all headers and have such
guards in all headers.
|
|
The visibility of the object is what counts, not just the visibility of
the collection.
|
|
There are no more 'layers' in Blender. I chose 'Visible Objects' rather
than 'Visible Collections' to be consistent with the other
'{Renderable,Selected} Objects Only' options.
No functional changes.
|
|
`AbcTransformWriter::hasAnimation` recently became smarter than just
returning `true`, but wasn't quite smart enough yet. Constraints are now
considered a source of 'animation'.
|
|
list is empty
The problem was the draw function tried to use the material and gpsettings and both were NULL.
Now, the default material is used.
|
|
The VERTEX mode was not checked in shaders and must be managed equals to MATERIAL mode.
|
|
Remove redundant defines.
|
|
|
|
|
|
|
|
When negative scaled matrices were used, the roll calculation
didn't match, when calling Armature.transform().
|
|
This is caused by the fallback path used by OSX, which is reconfiguring
the same default VAO. But it seems to be an issue on certain drivers.
|
|
|
|
Logic for registering and checking properties of registrable classes was
broken, allowing to ignore some errors.
Recent fix rBeb798de101a `broke` the result of the
pyapi_idprop_datablock test, because previously that test would fail
(i.e. suceed, as it is an 'expected to break test') for a reason it was
not designed to check.
This is the problem with that kind of tests - you cannot really check
that they are failing on the expected reason(s)...
|
|
Small change do not draw an unsupported renderpass in the viewport
|
|
This patch will allow the user to select the EEVEE renderpass to be
shown in the viewport by default the combined pass will be shown.
Limitations:
* Viewport rendering stores the result in a `RenderResult`. RenderResult
is not aware of the type of data it holds. In many places where RenderResult
is used it is assumed that it stores a combined pass and the display+view
transform are applied.
I will propose to fix this in a future patch. But that is still being
designed and discussed.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6319
|
|
- Don't duplicate the original vertices.
- Free old geometry before allocating the new geometry.
|
|
Follow up on T71865 which only reported the issue for shape keys.
|
|
Also make orbit the default rotation mode.
Based on feedback from T67579, this seems one of the main
pain points users are experiencing.
|
|
This was an old bug which could be caused by saving after separating.
Changes from 79b703bb635e made this fail reliably.
Update shape key indices when they may be used again later.
|
|
|
|
Simple fix, to mimic what we had pre-local collections. So this is not
fully representative of the current load of the scene.
I started a more complex route where we literally just count objects
that are visible (taking object type restriction, local collections,
local view, ...). But in the end it is a bit overkill considering that
we have plans to change the statistics.
|
|
Exposed by T71865, while the bug remains this resolves the crash.
|
|
Updated defaults and pressure/size curves for the Clay brush.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6298
|
|
This adds support to the current sculpt sample detail operator to sample
a voxel size for the voxel remesher when sculpting on regular meshes.
It provides an approximation of a voxel size that is going to preserve
the sampled sculpt details after remeshing. It is not going to be 100%
accurate in all cases as it relies on having consistent edge length in
the whole sculpt, but it saves a lot of time and avoids guessing the
voxel size by trying different values.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6251
|
|
The relation between the pressure/size and the pressure/alpha is a
fundamental property that defines the behavior of a brush, so it does
not make sense to have it unified across all brushes. This applies both
for sculpting and painting.
Some of the new 2.82 brushes need pressure/size or pressure/alpha to be
enabled to work propely, while others don't. Users should not be
switching on and off this property manually when changing brushes if they
want to use unified size. This is also causing that some users are using
the brushes with an incorrect configuration.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6291
|
|
After this commit it should be possible to share the same deformation
formulas that are used in the Elastic Deform brush with other areas of
Blender such as Grease Pencil or proportional editing.
This also removes a lot of code from sculpt.c that is not direclty
related to sculpting.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6281
|
|
This removes all multires code from the smooth brush and replaces it
with a new implementation that uses the sculpt mesh API. This makes the
code much easier to understand and maintain.
We could unify all the smooth brushes into a single implementation, but
mesh smoothing has code to deal with open boundaries that I don't want
to remove yet.
Most bugs and artifacts related to access neighbor grids should be fixed
(like T71667). This also fixes performance bugs such as T70689, that were
related to grid stitching after applying the brush.
Reviewed By: jbakker
Maniphest Tasks: T71667
Differential Revision: https://developer.blender.org/D6277
|
|
We are now modifying the relation between pressure and radius using
custom functions to improve the brushes, but dyntopo was not prepared
for this. This fix sends the unmodified radius to dyntopo so it modifies
the geometry correctly.
Reviewed By: jbakker
Maniphest Tasks: T71868
Differential Revision: https://developer.blender.org/D6299
|
|
|
|
Without this, it's not practical to change spacing on large
blocks of text.
|
|
BIF_gl.h included hacks like redefining glew functions and a constant.
The named constant `GLA_PIXEL_OFS` has been moved to `GPU_viewport.h`
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5860
|
|
Small performance improvements by caching the world_ubo in the World.
It was detected that NVIDIA driver created threads to update the
world_ubo (304 bytes). This patch will reuse the previous created
ubo when not changed.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6087
|
|
Extend options are currently stored per curve. This was not clearly
communicated to the user and they expected this to be a setting per
CurveMapping.
This change will move the option from `Curve` to `CurveMapping`. In
order to support this the API had to be changed.
BPY: CurveMap.evaluate is also moved to CurveMapping.evaluate what
breaks Python API. Cycles has been updated but other add-ons have
not. After release of 2.81 we can merge this to master and adapt
the add-ons.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D6169
|
|
As a followup to rB6f4e595e9ba9 and as per @campbellbarton suggestion,
this adds EDBM_selectmode_disable_multi, similar to
EDBM_mesh_deselect_all_multi & EDBM_mesh_deselect_all, so other similar
uses don't need to be done in a loop.
Also, selected_objects isn't a reliable way to handle this case - since
objects can be in edit-mode & not selected, use
BKE_view_layer_array_from_bases_in_edit_mode_unique_data instead
Differential Revision: https://developer.blender.org/D6317
|
