| Age | Commit message (Collapse) | Author |
|---|
|
Folders removed entirely:
* //extern/recastnavigation
* //intern/decklink
* //intern/moto
* //source/blender/editors/space_logic
* //source/blenderplayer
* //source/gameengine
This includes DNA data and any reference to the BGE code in Blender itself.
We are bumping the subversion.
Pending tasks:
* Tile/clamp code in image editor draw code.
* Viewport drawing code (so much of this will go away because of BI removal
that we can wait until then to remove this.
|
|
"Frequency" parameter is renamed to "Skip" in the LogicBricks sensors as it represents skipped frames between pulses.
Naming something (frequency) the exact opposite of what it represents (period) was the worst choice.
Also, a new BGE python attribute 'skippedTicks' was introduced. 'frequency' attribute is maintained but deprecated.
Internally, freq variable is used yet at DNA_Sensor to maintain compability and to avoid do_versions.
Thanks to Sybren for the investigation.
{F162440}
Reviewers: campbellbarton, sybren, moguri, hg1
Reviewed By: sybren, hg1
Differential Revision: https://developer.blender.org/D1229
|
|
- PyLong_FromSsize_t --> PyLong_FromLong
- PyLong_AsSsize_t --> PyLong_AsLong
In all places except for those where python api expects PySsize_t (index lookups mainly).
- use PyBool_FromLong in a few areas of the BGE.
- fix incorrect assumption in the BGE that PySequence_Check() means PySequence_Fast_ functions can be used.
|
|
|
|
|
|
- style - multi-line ifs move braces onto new lines.
- iterators - convert some to macros, other split up and move brace.
|
|
|
|
|
|
|
|
http://markmail.org/message/fp7ozcywxum3ar7n
|
|
|
|
|
|
|
|
with minor edits, made sure it works in CMake too.
|
|
|
|
Rough summary of fixes/changes:
- Blender Py API: GameLogic -> bge.logic
- Blender Py API: Implemented missing KX_PYATTRIBUTE_TODOs and -DUMMYs.
- Fix for [#22924] KX_PolygonMaterial.diffuse does not return expected list[r,g,b]
- Py API: Renaming _owner attribute of mathutils classes to owner.
- Fix some minor errors in mathutils and blf.
- Enabling game engine autoplay again based on a patch by Dalai:
* The biggest 3D view in the open scene is used, if there is none, blender opens the file normally and raises an error.
* The 3D view are is made fullscreen.
* Quad view, header, properties and toolbox panel are all hidden to get the maximum view.
* If the game engine full screen setting is set, the game starts in fullscreen.
- Fix for ipo conversion on file transition in the game engine.
|
|
124-126 but isnt used by any build systems now.
|
|
|
|
|
|
https://projects.blender.org/tracker/?func=detail&aid=19492&group_id=9&atid=127
|
|
and scons)
when python is disabled videotextures are not built.
|
|
|
|
|
|
define extra functions on gameObjects.
Adding a UI to set the type on startup can be added easily.
# ----
class myPlayer(GameTypes.KX_GameObject):
def die(self):
# ... do stuff ...
self.endObject()
# make an instance
player = myPlayer(gameOb) # gameOb is made invalid now.
player.die()
# ----
One limitation (which could also be an advantage), is making the subclass instance will return that subclass everywhere, you cant have 2 different subclasses of the same BGE data at once.
|
|
|
|
Remove the last of the odd C++/python wrapper code from http://www.python.org/doc/PyCPP.html (~1998)
* Use python subclasses rather then having fake subclassing through get/set attributes calling parent types.
* PyObject getset arrays are created while initializing the types, converted from our own attribute arrays. This way python deals with subclasses and we dont have to define getattro or setattro functions for each type.
* GameObjects and Scenes no longer have attribute access to properties. only dictionary style access - ob['prop']
* remove each class's get/set/dir functions.
* remove isA() methods, can use PyObject_TypeCheck() in C and issubclass() in python.
* remove Parents[] array for each C++ class, was only used for isA() and wasnt correct in quite a few cases.
* remove PyTypeObject that was being passed as the last argument to each class (the parent classes too).
TODO -
* Light and VertexProxy need to be converted to using attributes.
* memory for getset arrays is never freed, not that bad since its will only allocates once.
|
|
svn merge https://svn.blender.org/svnroot/bf-blender/trunk/blender -r19820:HEAD
Notes:
* Game and sequencer RNA, and sequencer header are now out of date
a bit after changes in trunk.
* I didn't know how to port these bugfixes, most likely they are
not needed anymore.
* Fix "duplicate strip" always increase the user count for ipo.
* IPO pinning on sequencer strips was lost during Undo.
|
|
-r19323:HEAD
Notes:
* blenderbuttons and ICON_SNAP_PEEL_OBJECT were not merged.
|
|
removed redundant (PyObject *self) argument from python functions that are not exposed to python directly.
|
|
- comments to PyObjectPlus.h
- remove unused/commented junk.
- renamed PyDestructor to py_base_dealloc for consistency
- all the PyTypeObject's were still using the sizeof() their class, can use sizeof(PyObjectPlus_Proxy) now which is smaller too.
|
|
There were also some problems with int to python conversion
- assigning a PyLong to a KX_GameObject from python would raise an error
- PyLong were coerced into floats when used with internal CValue arithmetic
Changes...
- PyLong is converted into CIntValue for coercing and assigning from python
- CValue's generic GetNumber() function returns a double rather then a float.
- Print an error when a PyType cant be coerced into a CValue
Tested with python, expressions and property sensor.
|
|
This way python raises more useful messages.
|
|
Use each types dictionary to store attributes PyAttributeDef's so it uses pythons hash lookup (which it was already doing for methods) rather then doing a string lookup on the array each time.
This also means attributes can be found in the type without having to do a dir() on the instance.
|
|
|
|
- Initialize python types with PyType_Ready, which adds methods to the type dictionary.
- use Pythons get/setattro (uses a python string for the attribute rather then char*). Using basic C strings seems nice but internally python converts them to python strings and discards them for most functions that accept char arrays.
- Method lookups use the PyTypes dictionary (should be faster then Py_FindMethod)
- Renamed __getattr -> py_base_getattro, _getattr -> py_getattro, __repr -> py_base_repr, py_delattro, py_getattro_self etc.
From here is possible to put all the parent classes methods into each python types dictionary to avoid nested lookups (api has 4 levels of lookups in some places), tested this but its not ready yet.
Simple tests for getting a method within a loop show this to be between 0.5 and 3.2x faster then using Py_FindMethod()
|
|
Added the method into the PyType so python knows about the methods (its supposed to work this way).
This means in the future the api can use PyType_Ready() to store the methods in the types dictionary.
Python3 removes Py_FindMethod and we should not be using it anyway since its not that efficient.
|
|
* Missed some cases of using a 'char *' as an attribute
* replace BGE's Py_Return macro with Pythons Py_RETURN_NONE
* other minor warnings removed
|
|
Use 'const char *' rather then the C++ 'STR_String' type for the attribute identifier of python attributes.
Each attribute and method access from python was allocating and freeing the string.
A simple test with getting an attribute a loop shows this speeds up attribute lookups a bit over 2x.
|
|
* Value clamping to min/max is now supported as an option for integer, float
and string attribute (for string clamping=trim to max length)
* Post check function now take PyAttributeDef parameter so that more
generic function can be written.
* Definition of SCA_ILogicBrick::CheckProperty() function to check that
a string attribute contains a valid property name of the parent game object.
* Definition of enum attribute vi KX_PYATTRIBUTE_ENUM... macros.
Enum are handled just like integer but to be totally paranoid, the sizeof()
of the enum member is check at run time to match integer size.
* More bricks updated to use the framework.
|
|
The principle is to replace most get/set methods of logic bricks by direct property access.
To make porting of game code easier, the properties have usually the same type and use than
the return values/parameters of the get/set methods.
More details on http://wiki.blender.org/index.php/GameEngineDev/Python_API_Clean_Up
Old methods are still available but will produce deprecation warnings on the console:
"<method> is deprecated, use the <property> property instead"
You can avoid these messages by turning on the "Ignore deprecation warnings" option in Game menu.
PyDoc is updated to include the new properties and display a deprecation warning
for the get/set methods that are being deprecated.
|
|
switching from char to const char
|
|
Thanks to Sean Bartell (wtachi), was causing many many warnings which distracted from the real problems.
|
|
transitions.
|
|
trigger the controller of a newly activated state, even if the sensor is already connected to an active state; new isTriggered() python function to determine which sensor triggered the current controller.
Previously, this behaviour was available only for sensors
that were not connected to any active state, which was
forcing the game designer to duplicate sensors in some
cases.
For example the Always sensors used to initialize the
states needed to be duplicated for each state. With this
patch, a single Always sensor with Level option enabled
will suffice to initialize all the states.
A Python controller can determine which sensor did trigger
with the new SCA_ISensor::isTriggered() function.
Notes:
- When a sensor with level option enabled is connected
to multiple controllers, only those of newly activated
states will be triggered. The controllers of already
activated states will receive no trigger, unless the
sensor internal state toggled, in which case all the
controllers are triggered as always.
- The old isPositive() function returns the internal
state of the sensor, positive or negative; the new
isTriggered() function returns 1 only for sensors
that generated an event in the current frame.
|
|
Introduction of a new Delay sensor that can be used to
generate positive and negative triggers at precise time,
expressed in number of frames.
The delay parameter defines the length of the initial
OFF period. A positive trigger is generated at the end
of this period. The duration parameter defines the
length of the ON period following the OFF period.
A negative trigger is generated at the end of the ON period.
If duration is 0, the sensor stays ON and there is no
negative trigger.
The sensor runs the OFF-ON cycle once unless the repeat
option is set: the OFF-ON cycle repeats indefinately
(or the OFF cycle if duration is 0).
The new generic SCA_ISensor::reset() Python function
can be used at any time to restart the sensor: the
current cycle is interrupted and no trigger is generated.
|
|
manager.
With this patch, only sensors that are connected to
active states are actually registered in the logic
manager. Inactive sensors won't take any CPU,
especially the Radar and Near sensors that use a
physical object for the detection: these objects
are removed from the physics engine.
To take advantage of this optimization patch, you
need to define very light idle state when the
objects are inactive: make them transparent, suspend
the physics, keep few sensors active (e,g a message
sensor to wake up), etc.
|
|
error, remove args on Py functions that don't take any to save CPU time
|
|
actuator, new orientation constraint actuator, new actuator sensor.
General
=======
- Removal of Damp option in motion actuator (replaced by
Servo control motion).
- No PyDoc at present, will be added soon.
Generalization of the Lvl option
================================
A sensor with the Lvl option selected will always produce an
event at the start of the game or when entering a state or at
object creation. The event will be positive or negative
depending of the sensor condition. A negative pulse makes
sense when used with a NAND controller: it will be converted
into an actuator activation.
Servo control motion
====================
A new variant of the motion actuator allows to control speed
with force. The control if of type "PID" (Propotional, Integral,
Derivate): the force is automatically adapted to achieve the
target speed. All the parameters of the servo controller are
configurable. The result is a great variety of motion style:
anysotropic friction, flying, sliding, pseudo Dloc...
This actuator should be used in preference to Dloc and LinV
as it produces more fluid movements and avoids the collision
problem with Dloc.
LinV : target speed as (X,Y,Z) vector in local or world
coordinates (mostly useful in local coordinates).
Limit: the force can be limited along each axis (in the same
coordinates of LinV). No limitation means that the force
will grow as large as necessary to achieve the target
speed along that axis. Set a max value to limit the
accelaration along an axis (slow start) and set a min
value (negative) to limit the brake force.
P: Proportional coefficient of servo controller, don't set
directly unless you know what you're doing.
I: Integral coefficient of servo controller. Use low value
(<0.1) for slow reaction (sliding), high values (>0.5)
for hard control. The P coefficient will be automatically
set to 60 times the I coefficient (a reasonable value).
D: Derivate coefficient. Leave to 0 unless you know what
you're doing. High values create instability.
Notes: - This actuator works perfectly in zero friction
environment: the PID controller will simulate friction
by applying force as needed.
- This actuator is compatible with simple Drot motion
actuator but not with LinV and Dloc motion.
- (0,0,0) is a valid target speed.
- All parameters are accessible through Python.
Distance constraint actuator
============================
A new variant of the constraint actuator allows to set the
distance and orientation relative to a surface. The controller
uses a ray to detect the surface (or any object) and adapt the
distance and orientation parallel to the surface.
Damp: Time constant (in nb of frames) of distance and
orientation control.
Dist: Select to enable distance control and set target
distance. The object will be position at the given
distance of surface along the ray direction.
Direction: chose a local axis as the ray direction.
Range: length of ray. Objecgt within this distance will be
detected.
N : Select to enable orientation control. The actuator will
change the orientation and the location of the object
so that it is parallel to the surface at the vertical
of the point of contact of the ray.
M/P : Select to enable material detection. Default is property
detection.
Property/Material: name of property/material that the target of
ray must have to be detected. If not set, property/
material filter is disabled and any collisioning object
within range will be detected.
PER : Select to enable persistent operation. Normally the
actuator disables itself automatically if the ray does
not reach a valid target.
time : Maximum activation time of actuator.
0 : unlimited.
>0: number of frames before automatic deactivation.
rotDamp: Time constant (in nb of frame) of orientation control.
0 : use Damp parameter.
>0: use a different time constant for orientation.
Notes: - If neither N nor Dist options are set, the actuator
does not change the position and orientation of the
object; it works as a ray sensor.
- The ray has no "X-ray" capability: if the first object
hit does not have the required property/material, it
returns no hit and the actuator disables itself unless
PER option is enabled.
- This actuator changes the position and orientation but
not the speed of the object. This has an important
implication in a gravity environment: the gravity will
cause the speed to increase although the object seems
to stay still (it is repositioned at each frame).
The gravity must be compensated in one way or another.
the new servo control motion actuator is the simplest
way: set the target speed along the ray axis to 0
and the servo control will automatically compensate
the gravity.
- This actuator changes the orientation of the object
and will conflict with Drot motion unless it is
placed BEFORE the Drot motion actuator (the order of
actuator is important)
- All parameters are accessible through Python.
Orientation constraint
======================
A new variant of the constraint actuator allows to align an
object axis along a global direction.
Damp : Time constant (in nb of frames) of orientation control.
X,Y,Z: Global coordinates of reference direction.
time : Maximum activation time of actuator.
0 : unlimited.
>0: number of frames before automatic deactivation.
Notes: - (X,Y,Z) = (0,0,0) is not a valid direction
- This actuator changes the orientation of the object
and will conflict with Drot motion unless it is placed
BEFORE the Drot motion actuator (the order of
actuator is important).
- This actuator doesn't change the location and speed.
It is compatible with gravity.
- All parameters are accessible through Python.
Actuator sensor
===============
This sensor detects the activation and deactivation of actuators
of the same object. The sensor generates a positive pulse when
the corresponding sensor is activated and a negative pulse when
it is deactivated (the contrary if the Inv option is selected).
This is mostly useful to chain actions and to detect the loss of
contact of the distance motion actuator.
Notes: - Actuators are disabled at the start of the game; if you
want to detect the On-Off transition of an actuator
after it has been activated at least once, unselect the
Lvl and Inv options and use a NAND controller.
- Some actuators deactivates themselves immediately after
being activated. The sensor detects this situation as
an On-Off transition.
- The actuator name can be set through Python.
|
|
wont generate empty args tuple when they are not needed.
|
|
Level option is now available on all sensors but is only implemented on
mouse and keyboard sensors. The purpose of that option is to make
the sensor react on level rather than edge by default. It's only
applicable to state engine system when there is a state transition:
the sensor will generate a pulse if the condition is met from the
start of the state. Normally, the keyboard sensor generate a pulse
only when the key is pressed and not when the key is already pressed.
This patch allows to select this behavior.
The second part of the patch corrects the reset method for sensors
with inverted output.
|
