| Age | Commit message (Collapse) | Author |
|---|
|
|
|
A btBvhTriangleMeshShape object is created when converting
a mesh to physics, also in case of Soft body although the
soft body will not use it (it only uses the mesh interface).
This patch keeps this system for compatibility with the
KX converter but avoids the creation of the BVH structure,
which consumes a lots of CPU. This should speed up
significantly the conversion of large mesh to softbody.
A secondary optimization is that the sharing of shapeInfo
is extended to rigid body using gImpact. Before it was
only active between static body and soft body.
|
|
|
|
|
|
|
|
KX_GameObject::rayCast(). Details in PyDoc.
|
|
modifications to Bullet have been reported to Bullet forum. Note: welding is completely disabled on soft body as it breaks the relationship between the soft body collision shape and the graphics mesh without bringing any additional stability (the reverse actually).
|
|
soft body mesh).
Even a static mesh can be used as replacement: the mesh
will be instantiated with the soft body settings of the
object. The position and orientation of the soft body
is preserved after the replacement.
Known limitation: the velocity of the soft body is reset
aftet the replacement. This is because soft body don't
have a well defined velocity.
|
|
https://projects.blender.org/tracker/?func=detail&aid=19492&group_id=9&atid=127
|
|
and scons)
when python is disabled videotextures are not built.
|
|
minor changes.
|
|
Was annoying to use a different editor for cmake only.
theeth says this should be ok with gsoc and merges from branches.
|
|
* bring back 'player' libtype, after investigation with ideasman.
scons/mingw works nicely, for some reason msvc fails to link still, will look further into it.
|
|
* further cleaning of 'player' stuff. Now only 3 libs are remaining, of which ideally the stubs lib will be fixed at some point, fading away into the dark history of not-so-nice code. The current blenderplayer part is still a little bit hackish, I'll see if I can find a better alternative, for now it works good enough.
|
|
* first working changes to get blenderplayer linking
* blenderplayer/ moved into source/ (CMakeLists.txt changed for that too)
* added externs for bprogname to gp_ghost, so that it links properly
|
|
* Add BGE_CXXFLAGS so we can get rid of hard-coded BGE compiler settings. This was only done for windows, but now linuxers and osxers should be able to set BGE-specific optimisation too. See the windows default configs for example.
|
|
Note, missing r22897, schlaile
source/blender/src/hddaudio.c
|
|
|
|
getValue() rather than setValue()
- added GPL header to bpy_interface.c from 2.4x's BPY_interface.c
- warning fixes
|
|
- when C++ uses guardedalloc SYS_DeleteSystem was called after MEM_printmemlist(), making it look like there was a leak.
|
|
MEM_mallocN for better tracking memory usage.
* off by default.
* new/delete are at the bottom of each class
* python BGE objects have the new/delete in the Py_Header macro.
|
|
* Removed CD Actuator
* Removed bSample and bSoundListener
* Removed SoundSystem
* Removed -noaudio parameter
|
|
|
|
Add support back for reinstancePhysics mesh, a frequently requested feature in the BGE forums.
from what I can tell Sumo supported this but bullet never did.
Currently only accessible via python at the moment.
- rigid body, dynamic, static types work.
- instanced physics meshes are modified too.
- compound shapes are not supported.
Physics mesh can be re-instanced from...
* shape keys & armature deformations
* subsurf (any other modifiers too)
* RAS_TexVert's (can be modified from python)
Moved the reinstancePhysicsMesh functions from RAS_MeshObject into KX_GameObject since the physics data is stored here.
video and blend file demo.
http://www.graphicall.org/ftp/ideasman42/reinstance.ogv
http://www.graphicall.org/ftp/ideasman42/reinstance_demo.blend
|
|
* ensure all SConscripts are ready for win64-vc (where necessary).
* ensure we have proper _DEBUG flag for Python when we're doing a debug build.
* some cleaning up of linking etc.
* ensure /EHsc is there for game engine modules.
|
|
Sequencer changes from source/blender/src coming next
|
|
Example is a cube that lands on a plane, sleeps after some time, a script changes the scale.
It would still use the scale when the object first went to sleep.
reported on blenderartist.
http://blenderartists.org/forum/showthread.php?t=158617
|
|
* Missing changes to release/windows/installer
* Sequencer fixes in source/blender/src/seqaudio.c dont apply to 2.5
* brechts fix for #18855 r20763 wasnt merged, does this apply to 2.5?
|
|
|
|
svn merge https://svn.blender.org/svnroot/bf-blender/trunk/blender -r19820:HEAD
Notes:
* Game and sequencer RNA, and sequencer header are now out of date
a bit after changes in trunk.
* I didn't know how to port these bugfixes, most likely they are
not needed anymore.
* Fix "duplicate strip" always increase the user count for ipo.
* IPO pinning on sequencer strips was lost during Undo.
|
|
#18893, fix to getParam for generic 6dof constraints
|
|
|
|
dynamic object when they have a translation and rotation movement at the same time (translation is ignored). Performance: avoid unnecessary synchronization for static object.
|
|
accept a KX_Light or KX_Camera (bad oversight on my part)
- Typo in occlusion variable init "m_buffer == NULL;" -> "m_buffer = NULL;"
CcdPhysicsEnvironment.cpp and CcdPhysicsController.cpp had too many warnings, fixed most of them.
|
|
Barton/ideasman for confirming it is ok to rename it)
+ fixed Python method, PyArg_ParseTuple already checks for errors, no returning of NULL, thanks Campbell too)
+ added linear/angular spring for each of the 6DOFs of a generic 6dof constraint. This makes the generic 6dof constraint very versatile.
|
|
allow to dynamically create rigid body constraints while disable collision detection between connected bodies, pass as 10th argument the flag 128
PhysiPython KX_ConstraintWrapper, setParam
export setParam(paramIndex,paramValue0,paramValue1) for Physics constraints
paramIndex 0,1,2 are linear limits, 3,4,5 are angular limits, 6,7,8 are linear motors, 9,10,11 are angular motors
For example:
disableConnectedBodies=128
cons = PhysicsConstraints.createConstraint(oid,rid,generic6dof,pivotInAx,pivotInAy,pivotInAz,angleX,angleY,angleZ,disableConnectedBodies)
#params 0,1,2 are linear limits, low,high value. if low > high then disable limit
cons.setParam(0,0,0)
I will provide an example .blend for Blender 2.49
|
|
this fixes rigid body stacking in this blend file:
http://blenderartists.org/forum/showpost.php?p=1382653&postcount=102
(todo: expose this setting in World setting GUI)
Expose contact processing threshold in Advanced GUI, next to rigid body margin, called CPT.
Default to 1, makes rigid body stacking a bit more stable, smaller values makes sliding easier (at the cost of easier jittering).
Disabled for 'dynamic' objects that don't rotate, because characters etc. always need smooth sliding.
|
|
panel. By default the collision margin is set to 0.25, which causes the soft body to somewhat float above the ground. You can decrease this value to get more realistic collision. Note that the algorithm may become unstable with lower margin.
|
|
collision capbility.
A new type of "Sensor" physics object is available in the GE for advanced
collision management. It's called Sensor for its similarities with the
physics objects that underlie the Near and Radar sensors.
Like the Near and Radar object it is:
- static and ghost
- invisible by default
- always active to ensure correct collision detection
- capable of detecting both static and dynamic objects
- ignoring collision with their parent
- capable of broadphase filtering based on:
* Actor option: the collisioning object must have the Actor flag set to be detected
* property/material: as specified in the collision sensors attached to it
Broadphase filtering is important for performance reason: the collision points
will be computed only for the objects that pass the broahphase filter.
- automatically removed from the simulation when no collision sensor is active on it
Unlike the Near and Radar object it can:
- take any shape, including triangle mesh
- be made visible for debugging (just use the Visible actuator)
- have multiple collision sensors using it
Other than that, the sensor objects are ordinary objects. You can move them
freely or parent them. When parented to a dynamic object, they can provide
advanced collision control to this object.
The type of collision capability depends on the shape:
- box, sphere, cylinder, cone, convex hull provide volume detection.
- triangle mesh provides surface detection but you can give some volume
to the suface by increasing the margin in the Advanced Settings panel.
The margin applies on both sides of the surface.
Performance tip:
- Sensor objects perform better than Near and Radar: they do less synchronizations
because of the Scenegraph optimizations and they can have multiple collision sensors
on them (with different property filtering for example).
- Always prefer simple shape (box, sphere) to complex shape whenever possible.
- Always use broadphase filtering (avoid collision sensor with empty propery/material)
- Use collision sensor only when you need them. When no collision sensor is active
on the sensor object, it is removed from the simulation and consume no CPU.
Known limitations:
- When running Blender in debug mode, you will see one warning line of the console:
"warning btCollisionDispatcher::needsCollision: static-static collision!"
In release mode this message is not printed.
- Collision margin has no effect on sphere, cone and cylinder shape.
Other performance improvements:
- Remove unnecessary interpolation for Near and Radar objects and by extension
sensor objects.
- Use direct matrix copy instead of quaternion to synchronize orientation.
Other bug fix:
- Fix Near/Radar position error on newly activated objects. This was causing
several detection problems in YoFrankie
- Fix margin not passed correctly to gImpact shape.
- Disable force/velocity actions on static objects
|
|
share display list.
This commit completes the support for modifiers in the BGE.
- The physic shape is generated according to the derived mesh.
This is true for all types of shapes and all types of
objects except soft body.
- Optimization for static derived mesh (mesh with modifiers
but no armature and no shape keys). Replicas will share
the derived mesh and the display list: less memory and
faster rendering. With this optimization, the static
derived mesh will render as fast as if the modifiers were
applied.
Known Limits:
- Sharing of mesh and display list is only possible between
in-game replicas or dupligroup. If you want to instantiate
multiple objects with modifiers, use dupligroup to ensure
best memory and GPU utilization.
- rayCast() will interact with the derived mesh as follow:
Hit position and hit normal are the real values according
to the derived mesh but the KX_PolyProxy object refers to
the original mesh. You should use it only to retrieve the
material.
- Dynamic derived mesh have very poor performance:
They use direct openGL calls for rendering (no support
for display list and vertex array) and they dont't share
the derived mesh memory. Always apply modifiers on dynamic
mesh for best performance.
- Time dependent modifiers are not supported.
- Modifiers are not supported for Bullet soft body.
|
|
rescaled. This happens when objects with very diverse scale are instantiated with dupligroup. The problem remains when the objects are rescaled during the game. The effect of the problem is an inefficient culling: objects can have a bounding box larger than needed. Patch to fix the problem is filed at Bullet forum.
|
|
the time spent on logic.
This function sets the maximum number of logic frame executed per render frame.
Valid values: 1..5
This function is useful to control the amount of processing consumed by logic.
By default, up to 5 logic frames can be executed per render frame. This is fine
as long as the time spent on logic is negligible compared to the render time.
If it's not the case, the default value will drag the performance of the game
down by executing unnecessary logic frames that take up most of the CPU time.
You can avoid that by lowering the value with this function.
The drawback is less precision in the logic system to physics and I/O activity.
Note that it does not affect the physics system: physics will still run
at full frame rate (actually up to 5 times the ticrate).
You can further control the render frame rate with GameLogic.setLogicTicRate().
|
|
unparented, it jumps at the position it had before the parenting.
|
|
skategirl.
Note that skategirl needs a bit higher angular damping, perhaps the conversion formula needs to be tweaked better?
|
|
speeds up shape conversion. This is fine if the object has no duplicate vertices. Otherwise, bullet will be extremely slow and you can either set some welding or remove duplicates in the mesh. Welding is now displayed in linear scale: 0.0 -> 0.01, no need to use logarithmic scale ;-). Fix a bug with Bullet by which vertex array for soft body must have 3xfloat stride.
|
|
Update the bounding box based on mesh extent after applying the modifiers.
|
|
|
|
-r19323:HEAD
Notes:
* blenderbuttons and ICON_SNAP_PEEL_OBJECT were not merged.
|
|
removed redundant (PyObject *self) argument from python functions that are not exposed to python directly.
|
|
|
