| Age | Commit message (Collapse) | Author |
|---|
|
Folders removed entirely:
* //extern/recastnavigation
* //intern/decklink
* //intern/moto
* //source/blender/editors/space_logic
* //source/blenderplayer
* //source/gameengine
This includes DNA data and any reference to the BGE code in Blender itself.
We are bumping the subversion.
Pending tasks:
* Tile/clamp code in image editor draw code.
* Viewport drawing code (so much of this will go away because of BI removal
that we can wait until then to remove this.
|
|
bge.logic.setRender(flag) to enable/disable render.
The render pass is enabled by default but it can be disabled with
bge.logic.setRender(False).
Once disabled, the render pass is skipped and a new logic frame starts
immediately. Note that VSync no longer limits the fps when render is off
but the 'Use Frame Rate' option in the Render Properties still does.
To run as many frames as possible, untick the option
This function is useful when you don't need the default render, e.g.
when doing offscreen render to an alternate device than the monitor.
Note that without VSync, you must limit the frame rate by other means.
fbo = bge.render.offScreenCreate(width,height,[,samples=0][,target=bge.render.RAS_OFS_RENDER_BUFFER])
Use this method to create an offscreen buffer of given size, with given MSAA
samples and targetting either a render buffer (bge.render.RAS_OFS_RENDER_BUFFER)
or a texture (bge.render.RAS_OFS_RENDER_TEXTURE). Use the former if you want to
retrieve the frame buffer on the host and the latter if you want to pass the render
to another context (texture are proper OGL object, render buffers aren't)
The object created by this function can only be used as a parameter of the
bge.texture.ImageRender() constructor to send the the render to the FBO rather
than to the frame buffer. This is best suited when you want to create a render
of specific size, or if you need an image with an alpha channel.
bge.texture.<imagetype>.refresh(buffer=None, format="RGBA", ts=-1.0)
Without arg, the refresh method of the image objects is pretty much a no-op, it
simply invalidates the image so that on next texture refresh, the image will
be recalculated.
It is now possible to pass an optional buffer object to transfer the image (and
recalculate it if it was invalid) to an external object. The object must implement
the 'buffer protocol'. The image will be transfered as "RGBA" or "BGRA" pixels
depending on format argument (only those 2 formats are supported) and ts is an
optional timestamp in the image depends on it (e.g. VideoFFmpeg playing a video file).
With this function you don't need anymore to link the image object to a Texture
object to use: the image object is self-sufficient.
bge.texture.ImageRender(scene, camera, fbo=None)
Render to buffer is possible by passing a FBO object (see offScreenCreate).
bge.texture.ImageRender.render()
Allows asynchronous render: call this method to render the scene but without
extracting the pixels yet. The function returns as soon as the render commands
have been send to the GPU. The render will proceed asynchronously in the GPU
while the host can perform other tasks.
To complete the render, you can either call refresh() directly of refresh the texture
to which this object is the source. Asynchronous render is useful to achieve optimal
performance: call render() on frame N and refresh() on frame N+1 to give as much as
time as possible to the GPU to render the frame while the game engine can perform other tasks.
Support negative scale on camera.
Camera scale was previously ignored in the BGE.
It is now injected in the modelview matrix as a vertical or horizontal flip
of the scene (respectively if scaleY<0 and scaleX<0).
Note that the actual value of the scale is not used, only the sign.
This allows to flip the image produced by ImageRender() without any performance
degradation: the flip is integrated in the render itself.
Optimized image transfer from ImageRender to buffer.
Previously, images that were transferred to the host were always going through
buffers in VideoTexture. It is now possible to transfer ImageRender
images to external buffer without intermediate copy (i.e. directly from OGL to buffer)
if the attributes of the ImageRender objects are set as follow:
flip=False, alpha=True, scale=False, depth=False, zbuff=False.
(if you need to flip the image, use camera negative scale)
|
|
Following up on recent double --> float commits in the game engine.
|
|
Use float in moto instead of double for MT_Scalar.
This switch allow future optimization like SSE.
Additionally, it changes the OpenGL calls to float versions as they are
very bad with doubles.
Reviewers: campbellbarton, moguri, lordloki
Reviewed By: lordloki
Subscribers: brecht, lordloki
Differential Revision: https://developer.blender.org/D1610
|
|
This class did nothing but print out extensions if they were found.
Instead, the code from bge.logic.PrintGLInfo() is now printed as the
Rasterizer is initialized. This gives better information, and it removes
some GL code from KX_PythonInit.cpp (the PrintGLInfo method now calls
the Rasterizer to print the information).
Differential Revision: https://developer.blender.org/D438
|
|
The only use we had for RAS_StorageIM was to render derived meshes using
Blender's mesh drawing. This is now handled as a special case in
RAS_OpenGLRasterizer instead of in RAS_StorageIM.
We are now left with RAS_StorageVA and RAS_StorageVBO. At the moment
vertex arrays are still the default since our vertex array with display
lists implementation is still much faster than our VBO code in a lot of
cases. As we improve our VBO code, we can drop vertex arrays since
Blender's minimum OpenGL version is being bumped up to 2.1, which
supports VBOs.
|
|
The work that was being done in IndexPrimitiveMulti() is now done by
IndexPrimitive() and we always assume multitexture support.
|
|
I have removed the m_pHitObject, m_xray and m_testPropName and replace them by a temporary struct "RayCastData" which contains these datas and a collision mask. Finally i add a collision mask argument in the python function "rayCast" :
```
rayCast(to, from, dist, prop, face, xray, poly, mask)
```
It can be useful to hit only object which are on the right colision layer. for example if you have hitbox for a charater or vehicle you don't want to hit it with raycast.
test file : {F237337}
left mouse click on two planes and see console messages.
Somewhat more elaborate test file by @sybren: {F237779}
Look around and click on the cubes. One cube lamp responds, the other doesn't, based on their collision groups.
Reviewers: moguri, hg1, agoose77, campbellbarton, sybren
Reviewed By: agoose77, campbellbarton, sybren
Subscribers: campbellbarton, sergey, blueprintrandom, sybren
Projects: #game_engine, #game_physics
Differential Revision: https://developer.blender.org/D1239
|
|
It's for the function render.drawLine and physics debug.
|
|
Code clean up for BGE world mist, background and global ambient color.
Move mist render update to BlenderWolrdInfo
Reviewers: moguri, brecht
Reviewed By: moguri, brecht
Differential Revision: https://developer.blender.org/D152
|
|
This patch adds the missing setMistType() and setMistIntensity() to the API
Reviewers: campbellbarton, brecht, moguri
Reviewed By: campbellbarton, brecht, moguri
Subscribers: campbellbarton, dingto
Differential Revision: https://developer.blender.org/D149
|
|
This patch fix the existing word API for mist and global ambient lighting.
Add deprecated message to disableMist()
Add setUseMist(enable).
Reviewers: dfelinto, campbellbarton, moguri
Reviewed By: moguri
Subscribers: solarlune, jta, brecht
Projects: #bf_blender:_next
Differential Revision: https://developer.blender.org/D148
|
|
The ultimate goal is to only allow the rasterizer to handle OpenGL and bf_gpu
calls. This commit creates a RAS_ILightObject interface and a RAS_OpenGLLight
implementation.
|
|
The rasterizer is already handling this, and there is
no need to duplicate the data.
|
|
|
|
|
|
|
|
into RAS_OpenGLRasterizer::ProcessLighting().
|
|
just adding the code to IndexPrimitives_3DText(), which is the only function that uses RenderText().
|
|
functionality to RAS_IRasterizer. RAS_OpenGLRasterizer is a bit of a mess now with references to Ketsji and other modules it shouldn't be accessing.
|
|
|
|
and bge.render.getMipmapping().
|
|
changes
to support more than 2 UV maps. This code indirectly depended on the order of
OpenGL attribute ID's assigned by the OpenGL driver being the same as the
attributes being declared in the GLSL shader code, which is not always the case.
|
|
|
|
not work in the viewport nor do they work for Variance shadow maps.
|
|
include:
* Cleaning up the conversion code to avoid a per-face material conversion. Materials are now stored in buckets and only converted if a new material is found. This replaces some of Campbell's earlier work on the subject. His work wasn't as thorough, but it was much safer for a release.
* Shaders are only compiled for LibLoaded materials once. Before they could be compiled twice, which could really slow things down.
* Refactoring the rasterizer code to use a strategy design pattern to handle different geometry rendering methods such as immediate mode, vertex arrays and vertex buffer objects. VBOs are added, but they will be disabled in a following commit since they are still slower than vertex arrays with display lists. However, VBOs are still useful for mobile, so it's good to keep them around.
* Better multi-uv support. The BGE should now be able to handle more than two UV layers, which should help it better match the viewport.
|
|
|
|
had a typo too.
|
|
|
|
|
|
functions with a macro.
|
|
|
|
/ classes.
|
|
http://markmail.org/message/fp7ozcywxum3ar7n
|
|
|
|
Summary:
========
The idea here is to move the texface options into the material panel.
For images with the change please visit:
http://code.blender.org/index.php/2011/09/bge-material-texface-changes
1 - Some of the legacy problems 2.49 and 2.5x has with the texface system:
==========================================================================
1.1) Shadow, Bilboard and Halo are mutual exclusive (in the code), yet you can
select a face to be more than one mode.
1.2) Sort only works for blend Alpha yet it's an option regardless of the
Transparency Blend you pick.
1.3) Shared doesn't affect anything in BGE.
1.4) ObColor only works for Text objects (old bitmap texts) when using Texture
Face Materials. (not address yet, I so far ignored obcolor)
2 - Notes:
============
2.1) Now "Use Face Textures" in material Option panel will work in Multitexture
even if there is no texture channel.
2.2) In FaceTexture mode it will use TexFace all the time, even if you don't
check the "Use Texture Face" option in the UI. It's a matter of decision, since
the code for either way is there. I decided by the solution that makes the
creation of a material fast - in this mode the user doesn't need to mess with
textures or this "Use Texture Face" option at all. I'm not strong in my opinion
here. But I think if we don't have this then what is the point of the Texture
Face mode?
2.3) I kept references for tface only when we need the image, UV or the tiling
setting. It should help later when/if we split the Image and UV layers from the
tface struct (Campbell and Brecht proposal).
3 - Changes in a Nutshell:
==========================
3.1) "Texture Face" panel (in the Mesh/Object Data panel) no longer exists. Those settings are all part of the material properties, visible when Game Render is set.
3.2) "Texture Face" Shading mode (in the Render panel) is now called “Single Texture”, it needs a material for special settings (e.g. Billboard, Alpha Sort, …).
3.3) New options in the Material Panel
* Shadeless option in the Material panel is now supported for all three Shading modes.
* Physics is now toggleable, this is the old Collision option.
* Two Side (on) is now called Back Culling (off).
* Alpha Sort is one of the Alpha options, together (and mutually exclusive) to Alpha Blend, Alpha Clip, Add and Opaque (i.e. solid).
* Shadow, Billboard and Halo are grouped in the “Face Orientation” property.
* "Face Textures" and "Face Textures Alpha" (under Options) can be used for all but GLSL shading mode (to be supported in GLSL eventually).
* The backend in the game engine is still the same as before. The only changes are in the interface and in the way you need to think your materials. The bottomline is: It’s no longer possible to share materials between faces that do not share the same game properties.
4 - Acknowledgment:
==================
Mike Pan for the design discussions, and testing along the whole development process.
Vitor Balbio for the first hands-on code with the interface changes. That helped me a lot to push me into work on that.
Benoit Bolsee and Brecht van Lommel for patch review (* no one reviewed the whole patch, or the latest iteractions, so I still hold liability for any problems).
Blender artists that gave feedback and helped testing the patch.
Patch review and original documentation can be found here:
http://wiki.blender.org/index.php/User:Dfelinto/TexFace
http://codereview.appspot.com/4289041/
|
|
https://svn.blender.org/svnroot/bf-blender/trunk/blender
|
|
anisotropic filtering level used by textures:
* setAnisotropicFiltering(level)
* getAnisotropicFiltering()
|
|
|
|
|
|
|
|
|
|
- ignore MSVC warnings when FREE_WINDOWS is defined to quiet warnings.
- the CMake flags were not being set correctly making blender have weirdo colors (no -funsigned-char).
|
|
|
|
created new function KX_RasterizerDrawDebugCircle)
|
|
- CMake building without python or fluidsim working again (broke in recent commit)
- remove BLI_short_filename(), it wasnt used anywhere.
|
|
|
|
focallength uses camera focallength
Now the default eye separation value is 0.10 (reasonable for games with 1 meter == 1 B.U.
The focallength used is the camera focal length (DOF settings). It allow you to even use different focal lengths for different scenes (good for UI)
In order to change it you can change the camera focal length or use Rasterizer.setFocalLength.
If you use the Rasterizer method it will use this value for all the cameras.
ToDo:
- Blenderplayer settings
- Update wiki documentation (any volunteer)?
* Note to stereo fans:
I don't have a real stereo environment to test it (other than cheap cyan-red glasses). If you can give it a try in a more robust system and report bugs or problems with BGE current system please let me know. I would be glad to help to make it work 100% by the time Blender 2.5 is out.
For the record, BGE is using the method known as 'parallel axis asymmetric frustum perspective projection'. This method is well documented here:
http://local.wasp.uwa.edu.au/~pbourke/miscellaneous/stereographics/stereorender/
|
|
MEM_mallocN for better tracking memory usage.
* off by default.
* new/delete are at the bottom of each class
* python BGE objects have the new/delete in the Py_Header macro.
|
|
svn merge https://svn.blender.org/svnroot/bf-blender/trunk/blender -r19820:HEAD
Notes:
* Game and sequencer RNA, and sequencer header are now out of date
a bit after changes in trunk.
* I didn't know how to port these bugfixes, most likely they are
not needed anymore.
* Fix "duplicate strip" always increase the user count for ipo.
* IPO pinning on sequencer strips was lost during Undo.
|
