Age | Commit message (Collapse) | Author |
|
Trivial changes, should not affect us in anyway.
|
|
(I.e influence, etc)
Reviewed By: sybren
Differential Revision: http://developer.blender.org/D16154
|
|
|
|
|
|
|
|
This introduces a new `UI_MT_button_context_menu` class which is
registered at startup. Addons can append/prepend draw functions to this
class, in order to add their custom context menu entries.
The new class replaces the old `WM_MT_button_context` class, thus
requiring a small change in addons using this feature. This is done
because addons were previously required to register the class
themselves, which caused addons to override each other's context menu
entries.
Now the class registration is handled by Blender, and addons need only
append their draw functions. The new class name ensures that addons
using the old method don't override menu entries made using the new
class.
Menu entries added with the legacy `WM_MT_button_context` class are
still drawn for backwards compatibility, but this class must not be used
going forward, as any addon using it still runs the risk of having its
menu entries overridden, and support for the legacy class is subject to
removal in a future version.
Reviewed By: campbellbarton
Maniphest Tasks: T100423
Differential Revision: https://developer.blender.org/D15702
|
|
The scene spacing code was failing to
check if a raycast failed, which can happen
when sculpting the edges of objects in negative
mode.
Note I removed what I suspect was a hack put
in to fix this, spacing was clamped
to 0.001 scene units.
Scene spacing mode is actually quite broken,
so it will be fixed in a series of phases.
|
|
|
|
This patch fixes naming and renaming issue with dot-dash modifier segment list.
Before: when double clicking and exiting it would append
number at the end regardless of name being changed or not.
Now it works like in other areas.
Authored by: Aleš Jelovčan (frogstomp)
Reviewed By: YimingWu (NicksBest)
Differential Revision: https://developer.blender.org/D15359
|
|
You can now push multiple sculpt undo nodes
of different types. This is necassary to handle
paint tools that have gravity enabled.
|
|
This patch suffixes Apple GPU device names with `(GPU - # cores)` so that variant GPUs with the same chipset can be distinguished. Currently benchmark scores for these M1 family GPUs are being incorrectly merged:
- M1: 7 or 8 cores
- M1 Pro: 14 or 16 cores
- M1 Max: 24 or 32 cores
- M1 Ultra: 48 or 64 cores
Reviewed By: brecht, sergey
Differential Revision: https://developer.blender.org/D15257
|
|
|
|
Also fixed an unreported issue of incorrect interpolation of thickness.
Reviewed By: Aleš Jelovčan (frogstomp), Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D15005
|
|
We really need to fix how unprojected radius (scene unit) works.
What happened is the paint code updates the brush's normal radius
with the current unprojected pixel radius, which was then
used by texture brush tiled mode.
To fix this I just cached the pixel radius at stroke start in
UnifiedPaintSettings->start_pixel_radius.
|
|
|
|
The PBVH draw cache wasn't being invalidated in
all cases. It is now invalidated whenever a PBVH
node's draw buffers are freed.
|
|
by showing redo panel.
The A hotkey has "auto iteration" enabled by default,
which calculates the number of times to run the filter
using a heuristic based on vertex count.
To make clear to the user what is going on the redo
panel is now shown for the mask filter operator.
NOTE: I discovered the source of the bug where sculpt
operators' redo panels were greyed out. The name
fed to SCULPT_undo_push_begin must match the operator
name. I've added a comment in sculpt_intern explaining
this.
|
|
- Verrtex paint mode has been refactored into C++ templates.
It now works with both byte and float colors and point
& corner attribute domains.
- There is a new API for mixing colors (also based
on C++ templates). Unlike the existing APIs byte
and float colors are interpolated identically.
Interpolation does happen in a squared rgb space,
this may be changed in the future.
- Vertex paint now uses the sculpt undo system.
Reviewed By: Brecht Van Lommel.
Differential Revision: https://developer.blender.org/D14179
Ref D14179
|
|
Bonus: Added docs for `--debug-ghost`.
Differential Revision: https://developer.blender.org/D14610
|
|
The new tab in the properties panel for "Color Attributes" shows the
data type and domain, just like the Attributes tab.
The issue is that the UI does not scale well and can only display the
full names when dragged to an extreme width.
This is due to the inclusion of the render icon in between the
attribute name and attribute type description.
This patch changes the order that items are displayed in the Color
Attributes Panel. Moving the render icon to the very right.
The result is consistent with other parts of the Blender UI and does
not take as much space to display the full text.
Reviewed By: @jbakker
Differential Revision: https://developer.blender.org/D14567
Ref D14567
|
|
|
|
This tool can be used to rapidly edit curves. The current set of
functionalities for Bezier splines are as follows:
The functionalities are divided into three versions of the operator:
* Left-Click
* Ctrl + Left-Click
* Double Click
All current functionalities and their defaults are as follows:
* Extrude Point: Add a point connected to an existing point.
Enabled for Left-Click.
* Extrude Handle Type: Type of the handles of the extruded points.
Can be either Vector or Auto. Defaults to Vector.
* Delete Point: Delete existing point.
Enabled for Ctrl + Left-Click.
* Insert Point: Insert a point into a curve segment.
Enabled for Ctrl + Left-Click.
* Move Segment: Move curve segment.
Enabled for Left-Click.
* Select Point: Select a single point or handle at a time.
Enabled for Left-Click.
* Move point: Move existing points or handles.
Enabled for Left-Click.
* Close Spline: Close spline by clicking the endpoints consecutively.
Defaults to True.
* Close Spline Method: The condition for Close Spline to activate.
Can be one of None, On Press or On Click.
Defaults to On Click for Left-Click and None for the others.
* None: Functionality is turned off.
* On Press: Activate on mouse down.
This makes it possible to move the handles by dragging immediately
after closing the spline.
* On Click: Activate on mouse release.
This makes it possible to avoid triggering the Close Spline
functionality by dragging afterward.
* Toggle Vector: Toggle handle between Vector and Auto handle types.
Enabled for Double Click on a handle.
* Cycle Handle Type: Cycle between all four handle types.
Enabled for Double Click on the middle point of a Bezier point.
The keybindings for the following functionalities can be adjusted from
the modal keymap
* Free-Align Toggle: Toggle between Free and Align handle types.
Defaults to Left Shift. Activated on hold.
* Move Adjacent Handle: Move the closer handle of the adjacent vertex.
Defaults to Left Ctrl. Activated on hold.
* Move Entire: Move the entire point by moving by grabbing on the handle
Defaults to Spacebar. Activated on hold.
* Link Handles: Mirror the movement of one handle onto the other.
Defaults to Right Ctrl. Activated on press.
* Lock Handle Angle: Move the handle along its current angle.
Defaults to Left Alt. Activated on hold.
All the above functionalities, except for Move Segment and
those that work with handles, work similarly in the case of Poly
and NURBS splines.
Reviewed By: HooglyBoogly, weasel, campbellbarton
Differential Revision: http://developer.blender.org/D12155
|
|
1. Now will remove lines if both adjacent faces are back face.
2. Added a check to respect material back face culling setting.
3. Changed label in the modifier to "Force Backface Culling" (which reflect more accurately with what the checkbox does).
Reviewed By: Antonio Vazquez (antoniov), Aleš Jelovčan (frogstomp)
Ref D14041
|
|
Renames is_never_null to violates_never_null.
|
|
Mark the work around that was added for the VSE memory leak.
|
|
Add a function that returns a list of keyframe segments
A segment being a continuous selection of keyframes
Will be used by future operators in the graph editor
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D13531
Ref: D13531
|
|
The line that sets the factor_prop in graph_slider_ops.c
has been left in the common invoke function by accident.
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D13477
Ref: D13477
|
|
This patch gets rid of the O(N^3) complexity
of calculate_vertices. Execution time of the node is
reduced from 250ms to 140ms with 500^3 vertices.
In the future edge calculations could be done manually
and reduce the execution time even further.
Differential Revision: https://developer.blender.org/D13207
|
|
Fixes a warning caused by freeing a const pointer.
This commit removes the const modifier.
Differential Revision: https://developer.blender.org/D13321
|
|
Now with Geometry Nodes in Blender,
trees can become much bigger than before.
This changes the minimum zoom value in the node editor.
Differential Revision: https://developer.blender.org/D13254
|
|
Mistake from rB2743d746ea4f38c098512f6dd6fc33d5a62429d3
|
|
Cycles:Distance Scrambling for Cycles Sobol Sampler
This option implements micro jittering an is based on the INRIA
research paper [[ https://hal.inria.fr/hal-01325702/document | on micro jittering ]]
and work by Lukas Stockner for implementing the scrambling distance.
It works by controlling the correlation between pixels by either using
a user supplied value or an adaptive algorithm to limit the maximum
deviation of the sample values between pixels.
This is a follow up of https://developer.blender.org/D12316
The PMJ version can be found here: https://developer.blender.org/D12511
Reviewed By: leesonw
Differential Revision: https://developer.blender.org/D12318
|
|
When the modifier iterates to an empty layer with no frame it will return,
while the correct logic is to continue.
|
|
The NLA editor is in need of a design overhaul, hopefully for 3.1 or 3.2.
This should be a project on itself, however, the worst offender currently is the use of
gradients on strips. Something that can be fixed easily.
{F11390293, size=full, loop, autoplay}
A simple replace of `UI_draw_roundbox_shade_x` for `UI_draw_roundbox_4fv` brings strips
in line with how other areas are drawn.
This patch also:
* Remove embossed lines around active action channel.
* Highlight the strip while being moved.
This patch does not include any theme changes. This will be tackled separately.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D12968
|
|
The conversion from double to float was causing a build failure.
Differential Revision: https://developer.blender.org/D12946
|
|
In editors with vertical scale indicators, such as Graph Editor,
Drivers, or VSE, display the values aligned to the view.
Also add a shadow (similar to the 3D View info) to improve readability when the text is on top of curves, strips, or other content.
{F10987240, size=full}
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D12809
|
|
This partially reverts commit e62ce9e08e919f25aad444f378947f6be932730f.
|
|
{F10761402}
With active viewport render from camera view, the camera border shows up, even when passepartout and overlays are disabled.
By moving the line-drawing code to the passepartout section, it is effectively disabled when passepartout is off.
Reviewed By: sebastian_k
Differential Revision: https://developer.blender.org/D12745
|
|
smooth out jaggy lines with a given threshold. For each point in a stroke, the ones with in a given distance of its previous segment will be removed,
thus "zig-zag" artefacts can be cleaned up.
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D12050
|
|
This node can be used to fillet splines at control points to
create a circular arc.
The implementation roughly follows T89227's design.
The node works in two main modes: Bezier and Poly
* Bezier: Creates a circular arc at vertices by changing
handle lengths (applicable only for Bezier splines).
* Poly: Creates a circular arc by creating vertices (as
many as defined by the Count fields input) along
the arc (applicable for all spline types).
In both modes, the radius of the created arc is defined
by the Radius fields input.
The Limit Radius attribute can be enabled to prevent
overlapping when the defined radius exceeds the maximum
possible radius for a given point.
Reviewed By: Hans Goudey
Differential Revision: https://developer.blender.org/D12115
|
|
Create dot-dash effect for grease pencil strokes. User can manually edit the length, gap and styles for each segment of dashed lines.
The values in each segment can all be key-framed to make animations.
Reviewed By: Hans Goudey (HooglyBoogly), Antonio Vazquez (antoniov)
Differential Revision: http://developer.blender.org/D11876
|
|
Lowers tile splitting limit so models with extremely dense mesh
portions could still have reasonable performance while for more
common cases the performance impact should be minimal.
Reviewed By: Sebastian Parborg (zeddb), Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D12236
|
|
When using a pose slider it is possible to hide bones with the 'H' key.
Before this patch the screen didn't update, so you had to move the mouse 1 pixel to update.
This patch makes it so it updates right away
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D12024
Ref: D12024
|
|
In the draw module, it's not easy to identify what its header is, and
where the shared functions are.
So move `draw_cache_extract_mesh_extractors.c` and
`draw_cache_extract_mesh_private.h` to the same folder as the extractors
and rename these files to make them more identifiable.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11991
|
|
|
|
This allows line art to run only once for each modifier stacks,
with an option to toggle a specific line art modifier should
use cache or re-do their own calculations.
Reviewed By: Sebastian Parborg (zeddb), Hans Goudey (HooglyBoogly)
Differential Revision: https://developer.blender.org/D11291
|
|
This is an adaptation of {D11488}.
A disadvantage of manually setting the iter ranges per thread is that
we don't know how many threads are running in the background and so we
don't know how to best distribute the ranges.
To solve this limitation we can use `parallel_reduce` and thus let the
driver choose the best distribution of ranges among the threads.
This proved to be especially beneficial for computers with few cores.
**Benchmarking:**
Here's the result on an 4-core laptop:
||master:|PATCH:
|---|---|---|
|large_mesh_editing:|Average: 5.203638 FPS|Average: 5.398925 FPS
||rdata 15ms iter 43ms (frame 193ms)|rdata 14ms iter 36ms (frame 187ms)
Here's the result on an 8-core PC:
||master:|PATCH:
|---|---|---|
|large_mesh_editing:|Average: 15.267482 FPS|Average: 15.906881 FPS
||rdata 9ms iter 28ms (frame 65ms)|rdata 9ms iter 25ms (frame 63ms)
|large_mesh_editing_ledge: |Average: 15.145966 FPS|Average: 15.520474 FPS
||rdata 9ms iter 29ms (frame 65ms)|rdata 9ms iter 25ms (frame 64ms)
|looptris_test:|Average: 4.001917 FPS|Average: 4.061105 FPS
||rdata 12ms iter 90ms (frame 236ms)|rdata 12ms iter 87ms (frame 230ms)
|subdiv_mesh_cage_and_final:|Average: 1.917769 FPS|Average: 1.971790 FPS
||rdata 7ms iter 37ms (frame 261ms)|rdata 7ms iter 31ms (frame 258ms)
||rdata 7ms iter 38ms (frame 252ms)|rdata 7ms iter 33ms (frame 249ms)
|subdiv_mesh_final_only:|Average: 6.387240 FPS|Average: 6.591251 FPS
||rdata 3ms iter 25ms (frame 151ms)|rdata 3ms iter 16ms (frame 145ms)
|subdiv_mesh_final_only_ledge:|Average: 6.247393 FPS|Average: 6.596024 FPS
||rdata 3ms iter 26ms (frame 158ms)|rdata 3ms iter 16ms (frame 148ms)
**Notes:**
- The improvement can only be noticed if all extracts are multithreaded.
- This patch touches different areas of the code, so it can be split into another patch if the idea is accepted.
These screenshots show how threads behave in a quadcore:
Master:
{F10164664}
Patch:
{F10164666}
Differential Revision: https://developer.blender.org/D11558
|
|
Inside the sequencer the cropping and transform of images/buffers were
implemented locally. This reduced the optimizations that a compiler
could do and added confusing code styles. This patch adds
`IMB_transform` to reduce the confusion and increases compiler
optimizations as more code can be inlined and we can keep track of
indices inside the inner loop.
This increases end-user performance by 30% when playing back aa video
in VSE.
Reviewed By: ISS, zeddb
Differential Revision: https://developer.blender.org/D11549
|
|
Prepare node for conversion to Geometry Nodes.
There should be no functional changes.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D11506
|
|
Remove an unnecessary call to pose_slide_mouse_update_percentage
That call was overriding the typed value
Reviewed By: #animation_rigging, Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D11395
Ref D11395
|