| Age | Commit message (Collapse) | Author |
|---|
|
When editing a complex curve is very annoying to have all handles at a time. Also, this is a requirement for the current GSoC Edit Grease Pencil using curves.
I have seen that this improvement can be used in any other area of blender, so I have decided to publish the option in the overlay panel..
Reviewed By: fclem, #user_interface, billreynish, Severin
Differential Revision: https://developer.blender.org/D7754
|
|
Recent commit deaff945d0b96 broke release builds but not debug builds,
with this change the warning happens in both cases.
|
|
Allow use of the full width of visible borders when dragging to resize areas.
Differential Revision: https://developer.blender.org/D7823
Reviewed by Brecht Van Lommel
|
|
interp_weights_poly_v2 would have too large epsilon values for small
polygons. To solve this we now calculate the appropriate epsilon value
so it can gracefully handle big and small values.
To make sure there was no regression, these changes were tested with the
files in T36105, T31581. Also with a surface deform modifier test file
attached in the differential below.
Reviewed By: Brecht
Differential Revision: http://developer.blender.org/D7772
|
|
This way we have a convenient way to clear individual textures.
|
|
Alternative fix for T75292 & T73579 (see b75ce05c3b0f), that does not
cause this crash.
The crash happened because cancelling the file browser removes its
screen (as in bScreen). Before rBb75ce05c3b0f, the file browser event
wouldn't be handled any further then. After it, it would still be passed
to other areas, while the screen pointer was dangling.
Now the event is only skipped for UI handlers.
Reviewed by: Julian Eisel
|
|
Solution is actually very simple, and even makes existing code simpler:
just write all lib IDs when storing and undo step. That way we do not
have to guess which indirectly used library should be kept or not after
an undo step reading.
|
|
This is an alternative deformation brush for the Pose Brush intended
quickly change the proportions of the mesh. The regular mode scales
using the segment's origin as a pivot. The inverted mode drags the
entire segment using the grab delta.
The only difference with the regular pose brush is that it is not
compatible with IK, so the option is disabled and set to 1 segment. The
rest of the options should work as expected.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7374
|
|
Would just silently fail, which is confusing.
Should only impact custom builds.
|
|
|
|
This change is yet to be followed by a more comprehensive design
proposal including:
* How to differentiate the modes apart.
* More clear definition of tools and the rules for their components (gizmo, cursor).
* Selection as a non-tool vs drag option.
This can be revisited for 2.90 with more time. For now the UI team
agrees to revert this.
--
This reverts commit 4aa703aa1430bc53f19e2cc7182e70db1a916f13.
|
|
|
|
Blender's main loop puts the main thread to sleep for 5ms if no user input was
received from the OS. We never want that to happen while the VR session is
running, which runs on the main thread too.
For simpler scenes, where the viewport already draws fast, this may have quite
some impact. E.g. in my tests, the classroom scene went from ~55 to quite
stable 90 FPS in solid mode (total render time as measured and averaged by
Windows Mixed Reality utilities). With Eevee, it only went from 41 to 47 FPS.
In complex files, there's barely a difference. E.g. less than 1 FPS increase in
a Spring file (both Solid mode and Eevee).
|
|
When the Child Of constraint is owned by a bone, before the constraint is
run the matrix is converted from world to pose space. However, setting the
inverse should also take the armature object's transform into account.
|
|
Conflicts:
source/blender/blenkernel/intern/lib_id.c
|
|
Thing is, user code should not have the responsibility to check that
libquery is valid. Such checks are only source of confusion and errors
as nobody will think about finding and updating them in some obscure
specific area of the code...
|
|
No reason to enforce defining own callback user data for something that
controlling has already available...
|
|
Code dealing with embedded data was pre-existing proper generic
handling of those by `BKE_library_foreach_ID_link()` - and was never
updated for scene's master collection it would seem...
Note that such fix/refactor is a bit risky at this point in the release
cycle, but on the other end previous situation was really broken. So
finger crossed. :|
|
|
Code dealing with embedded data was pre-existing proper generic
handling of those by `BKE_library_foreach_ID_link()` - and was never
updated for scene's master collection it would seem...
Note that such fix/refactor is a bit risky at this point in the release
cycle, but on the other end previous situation was really broken. So
finger crossed. :|
|
|
This resolves a performance regression in 2.8x where every edit-mode
update performed an edit-mesh to mesh conversion.
Now the conversion will be lazily initialized if/when it's required.
New BKE_mesh_wrapper_* functions abstract over mesh data access.
Currently only edit-mesh and regular meshes are supported.
In the future sub-surface meshes may be supported too.
|
|
|
|
Spotted while looking into T76872
Maniphest Tasks: T76872
Differential Revision: https://developer.blender.org/D7786
|
|
|
|
|
|
Note that this sometimes gives no solution when there is a mix of edges
with and without faces... But at leat this should be safe fix.
|
|
Add TBB::flow graph scheduling to BLI_task.
Using flow graphs, a graph of nodes (tasks) and links can be defined.
Work can flow though the graph. During this process the execution of the nodes will be
scheduled among the available threads.
We are planning to use this to improve the threading in the draw manager.
The implemented API is still limited it only supports sequential flows. Joins and buffers
are not supported. We could eventually support them as part of an CPP API. These features
from uses compile time templates and are hard to make a clean C-API for this.
Reviewed By: Sergey Sharybin, Brecht van Lommel
Differential Revision: https://developer.blender.org/D7578
|
|
|
|
|
|
|
|
Lamps were not tagged with `ID_RECALC_SHADING` when they were updated
from drivers. As a result, Cycles considered the lamp as unchanged. This
is resolved by having a (seemingly non-functional) callback in a new
`LIGHT_UPDATE` depsgraph node.
This patch unconditionally adds the `LIGHT_UPDATE` node + the relation
from the lamp's PARAMETERS node.
Differential Revision: https://developer.blender.org/D7822
Reviewed by: brecht
|
|
The `BM_mesh_bm_to_me()` function copies shape keys from the BMesh to
the Mesh. However, it tries to copy the same number of shape keys as are
defined on the target mesh. Since the target mesh does not necessarily
have the same number of shape keys as the BMesh, this would crash if the
target Mesh has more.
Found while performing some tests for {D7785}.
Differential Revision: https://developer.blender.org/D7818
Reviewed by: brecht
|
|
|
|
No longer enforce WITH_HEADLESS when building as a Python module
as it disables GPU access which is needed for rendering.
|
|
|
|
|
|
|
|
While investigating T76274, I found crash scenario when playhead is near end
frame and moving a strip. It is not as easy to reproduce, about 5% success
rate, and it will be even harder after rB4066c921fbe5. Exact cause wasn't
identified yet.
I wanted to disable prefetching during modal operator execution in VSE, but
currently I don't have any signalling method in place. Checking for G.moving
seems to resolve this problem, but it doesn't adress root cause of bug.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7820
|
|
Blender's main loop puts the main thread to sleep for 5ms if no user input was
received from the OS. We never want that to happen while the VR session is
running, which runs on the main thread too.
For simpler scenes, where the viewport already draws fast, this may have quite
some impact. E.g. in my tests, the classroom scene went from ~55 to quite
stable 90 FPS in solid mode (total render time as measured and averaged by
Windows Mixed Reality utilities). With Eevee, it only went from 41 to 47 FPS.
In complex files, there's barely a difference. E.g. less than 1 FPS increase in
a Spring file (both Solid mode and Eevee).
|
|
The operators to open the Preferences, Driver Editor, or Info Log window did
not work when executed from another operator or the Python console. Should work
for all of these now.
I considered using operator properties instead, so the position could be set by
a script, with some fallback (e.g. current window center). But decided that's
not really worth the boilerplate and decreased code readability. Can still be
done if there's a need for it.
|
|
|
|
In som ecases, the Paint was not ready when the brushes and palette were created. Now, first the paint is checked.
|
|
|
|
Allow setting drivers and keyframes for the bone visibility restriction
icon in the outliner. Before the button was a simple icon button, but it
is now connected to the RNA property to show the driven or keyframed
state.
Also when hiding a bone from the outliner it would be deselected, but
from the properties editor it would remain selected. This moves the
deselection to the RNA update function to ensure the bone is always
deselected.
Differential Revision: https://developer.blender.org/D7825
|
|
|
|
If the stroke is totally straight, the normal was not calculated properly.
|
|
|
|
|
|
Differential Revision: https://developer.blender.org/D7655
|
|
|
|
|
