Age | Commit message (Collapse) | Author |
|
- PALETTE_OT_color_add: crashed without a brush.
- SCREEN_OT_actionzone: crashed without a window.
- PREFERENCES_OT_studiolight_show: exception when opening prefs failed.
|
|
The slide brush requires attachment information on the curves.
Now a warning is shown instead of crashing Blender. The attachment
information can be generated by executing the
`Curves > Snap to Nearest Surface` operator.
|
|
Don't decrement ID reference counts as any ID references from the
window-managers will have already been freed.
Reviewed By: mont29
Ref D15808
|
|
Problem with e3a6a2f41284f90b010.
|
|
It's possible for misbehaving scripts written before 3.3 to reach
this state and crash Blender. With this change, the error is reduced
to a Python exception.
Differential Revision: https://developer.blender.org/D15724
|
|
If reroute node lies in side the frame node boundaries then set
frame node as the parent of reroute.
Differential Revision: https://developer.blender.org/D15739
|
|
|
|
OpenVDB crashes when the determinant of the grid transformation is
too small. The solution is too detect when the determinant is too small
and to replace the grid with an empty one. If possible the translation
and rotation of the grid remains unchanged.
Differential Revision: https://developer.blender.org/D15806
|
|
Fix for running operators outside of expected contexts.
- UI_OT_view_drop (poll)
- UI_OT_view_item_rename (poll)
- OBJECT_OT_gpencil_modifier_move_to_index
- OBJECT_OT_modifier_move_to_index
- OBJECT_OT_geometry_nodes_input_attribute_toggle
- OBJECT_OT_geometry_node_tree_copy_assign
- OBJECT_OT_shaderfx_remove
- OBJECT_OT_shaderfx_copy
- POSE_OT_relax (& other pose slide operators).
|
|
A reference to the active brush was kept even when it was freed.
|
|
Running transform in background mode or without a region would crash.
|
|
Committed in rB3c7a6718ddc.
|
|
With rBe6a557952ead, concerns were reported about missing updates when
the view is moved other than through the Edge Pan system.
Although the transform operator blocks navigation in general, it is
good to avoid these cases.
|
|
Caused by {rBd2271cf93926}.
Color values were being used without being initialized.
|
|
The view offset, calculated by the Edge Pan system, only affects the
position of the nodes, but forget to update:
- snapping data
- final value of transform
- values used for custom drawing
Therefore, to avoid having to update a lot of scattered data, the
`transformViewUpdate` utility has been implemented to recalculate input
values when the view changes.
This utility does more than is necessary to fix the bug, but with that,
it can work in any situation.
|
|
Was using uninitialized ID name, leading to unknown ID type.
Thanks at Ray molenkamp (@LazyDodo) for noting the issue.
|
|
The calculation was revised to address two issues:
* Discontinuities occurring when detail was a non-integer greater than 2.
* Levels of detail in the interval [0,1) repeating the levels of detail in
the interval [1,2).
This fixes Cycles, Eevee and geometry nodes.
Differential Revision: https://developer.blender.org/D15785
|
|
list" code path
The blendfile_liblink and blendfile_io python tests in debug fired an
assert that WMWinMan object was in Main database, but not in the ID
name map. This was caused by wm_window_match_do going into case 3
there: the new WM list is completely empty, the old list is not empty,
and it was directly using the old/current list (via
wm_window_match_keep_current_wm function), without actually
registering/validating the objects in it through the name map.
Reviewed By: Bastien Montagne
Differential Revision: https://developer.blender.org/D15787
|
|
Regression from {rBf4d7ea2cf61} where the direction was flipped.
Maniphest Tasks: T100602
Differential Revision: https://developer.blender.org/D15779
|
|
|
|
Those collections were so far mainly just tagged as fake user (even
though a few places in code already incremented usercount on them).
Since we now clear the fakeuser flag when linking/appending data, ensure
that these collections are preserved by making these usages regular ID
refcounting ones.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D15783
|
|
Since rBb100bdca25b1 the parent inverse was always reset in
ED_object_parent (also for just changing the parent type).
This does make sense (since there is no point keeping it when e.g
changing from "Bone" to "Object" or "Vertex" to "Object", for this to
really make sense it would have to be properly recalculated anyways
which does not happen afaict).
The reported issue was that setting the prop to the same value as it was
before (e.g. from "Object" to "Object") would still reset the parent
inverse which was really unexpected since from a user standpoint,
nothing has changed here.
So in case the value does not really change, we now just early out and
skip `ED_object_parent`.
Maniphest Tasks: T100599
Differential Revision: https://developer.blender.org/D15771
|
|
|
|
on Clear, general cleanup.
Inconsistencies in update/tagging code between different code doing the
same 'Clear. liboverride operation lead to crashes in some cases.
Unify deg tagging and WM notifiers accross the three editor-level
codepaths performing the common Make/Reset/Clear operations.
Preserve if possible the active object accross Clear operation.
Several cleanup/rename/re-arangement of code to make it more consistent.
|
|
Matches other operators' names and UI labels better.
|
|
Rotating a quaternion by a negative matrix gave an invalid result.
Follow up fix for T94231 which negated negative matrices too.
|
|
Apply transform failed to clear delta quaternion & axis-angle rotation.
|
|
Mistake in own rBc76d7f7bde35.
Happened when no image was set in the Image Editor already (which is now
checked for).
Maniphest Tasks: T100590
Differential Revision: https://developer.blender.org/D15761
|
|
The result of mat3_normalized_to_quat isn't valid for negative matrices.
Isolate the fix to the Matrix.to_quaternion() instead of changing
mat3_normalized_to_quat to prevent unintended side effects elsewhere.
|
|
Was not using the absolute index for comparison,
breaking the id_management test.
|
|
Function `rna_ColorManagement_update` tagged unnecesary updates.
Reviewed By: sergey, brecht
Differential Revision: https://developer.blender.org/D15710
|
|
Invalidate depsgraph.object_instances when freed, this resolves a crash
when accessing the object instances after iteration has finished.
Unlike most other collections, object_instances is only valid while the
iterator is in-memory.
The Python/RNA API needs to inline int/string collection lookups so the
Python instance can be created before the iterator ends.
Reviewed By: mont29, sergey
Ref D15755
|
|
|
|
Since {rB2542fda14d85}, `r_node` is an unused parameter.
Changed `load_texture_image` to reflect that.
Differential Revision: https://developer.blender.org/D15759
|
|
Main motivation is from T54314 where there was no way to read from a
Viewer image datablock after setting another viewer node active.
Part of the problem was addressed in rB16d329da284c (where handlers for
the compositing background job were added so that you can act after the
compositor has run), however there was still the remaining issue that
setting another viewer node active would not properly tag the node
NODE_DO_OUTPUT. This forced users into a complicated workaround (using
switch nodes feeding into a single viewer node).
Now handle NODE_DO_OUTPUT properly in RNA, too, and do proper updates so
that behavior from RNA matches that of the Node Editor when setting a
viewer node active.
ref T54314.
Reviewed By: JacquesLucke
Maniphest Tasks: T54314
Differential Revision: https://developer.blender.org/D15203
|
|
Custom nodes are not supported, but it shouldn't crash here.
|
|
|
|
This was the case when the "Show in Editmode" option was used and a
vertexgroup affected the areas.
Probably an oversight in {rBdeaff945d0b9}?, seems like deforming
modifiers always need to call `BKE_mesh_wrapper_ensure_mdata` in
`deformVertsEM` when a vertex group is used.
Maniphest Tasks: T100578
Differential Revision: https://developer.blender.org/D15756
|
|
Since {rBb0cb0a785475}, changing the active texture in the Node Editor
would also change the current image in the Image Editor.
While this was an overall improvement, this was not desired when the
image currently looked at was a `Render Result` or a `Viewer Node`
(artists usually want to keep focus on these).
With this patch, syncing the active texture change from the Node Editor
to the Image Editor will now only happen if the Image Editor's current
image is not a Render Result or a Viewer Node.
NOTE: Syncing the active paint slot to the Image Editor still happens
(even if the Image Editor's current image is not a Render Result or a
Viewer Node), behavior was not changed since this is a much more
explicit action while texture painting and probably desired in that
case.
Maniphest Tasks: T99493
Differential Revision: https://developer.blender.org/D15749
|
|
collision
|
|
|
|
The triangulate node is not supposed to take shape keys into account.
This was likely a mistake in rBabf30007abdac2a5bf3a1.
|
|
Differential Revision: https://developer.blender.org/D15705
|
|
Add missing labels, and also add tooltips.
Unfortunately there is no way currently to extract two messages from a
single 'function' call, so unless those type of macros become very
widely used, would keep it as manual tagging.
Also disambiguate `case` in text context, pretty sure English is one of
the very rare languages to use this word for character case too.
|
|
- Keying (keyframe insertion)
- Roughness (particle children)
- New image, collection, text (in menus)
- Parents (particles)
- Wrap (text)
- Light (add menu)
- Empty (volume add menu)
- Empty (empty add menu)
- Cycles (f-curve modifier)
- Drag (workspace tool type)
- Power (light intensity)
- Power (math nodes)
This last change also moves all math operations in nodes to the
ID_nodetree context. It's needed only for some operations, but we
can't be more granular here.
Also...
- Fix context extraction for interpolation mode headers in F-Curves
and GPencil interpolation operator
- Enable new translation: "Slot %d" in image editor
- Fix an English message in the node editor:
"Replace the input image's alpha channels by..." -> channel
Ref. T43295
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15694
|
|
`UI_context_active_but_prop_get_templateID` became much more widely used
with recent rBfec254364884, which revealed that it did not do any check
on actual type of data it accesses, resulting easily in undefined
behavior.
Now also check the callback function pointer, this should be safe
enough.
Patch by @Severin (Julian Eisel), many thanks!
|
|
Improve messages when the font directory can't be detected or is missing.
|
|
Restore old hitbox for connecting links to sockets.
Commit rBd9d97db018d2 improved the node socket snapping when nodes
are close together by decreasing the tolerance around the cursor when
checking for nodes in front, that might occlude the socket.
In doing so it also reduced the hitbox of the node socket itself that
extended outside of the node.
This commit restores the old node socket hitbox while keeping the
improved behavior when nodes are close together with the following
changes:
1) When looking for the socket under the cursor, iterate through the
nodes front to back, which prioritizes node sockets in the foreground.
2) Instead of checking for another node underneath the cursor it checks
if the socket is actually occluded by another node.
The way the occlusion test for sockets is tweaked you can now connect to
sockets that are only partially occluded, which is a bit more forgiving
than previously.
Reviewed By: Hans Goudey
Differential Revision: http://developer.blender.org/D15731
|
|
When displaying the Hierarchies view of the Library Overrides display
mode in a specific Heist production file, Blender would become
unresponsive for about 30 seconds and every redraw in the Outliner would
lag noticably. Issue is that the sum of hierarchy elements is multiple
thousands, and that really brings the Outliner to its knees. I've looked
into some improvents and committed a few minor ones already, but it
seems it's really the big sum of elements causing the issue. There
doesn't appear to be a single bottle-neck.
To work around this, "lazy build" children, so that children of
collapsed elements are not actually created. This brings the tree
building down to some tens of miliseconds, and redrawing becomes
rather lag-free again, even with big parts of the tree un-collapsed.
Problem: Searching still needs to build the entire tree, so it's
essentially unusable right now. Should we disallow searching
altogether?
|
|
Makes the lazy-building (where children are only built when the parent
isn't collapsed) more generic, so more display modes can use it. So far
this was hardcoded for the "Data API" display mode.
This will be used to work around a big performance issue with the
Library Overrides Hierachies view in a complex production file, see
following commit.
|