Age | Commit message (Collapse) | Author |
|
Added support for compositor tests. Compositor tests can be added, executed and viewed in a similar way to cycles
and other render engines tests.
Running test:
`ctest -R compositor`
Updating test:
`BLENDER_TEST_UPDATE=1 ctest -R compositor`
Viewing test results:
typically saved under `build_folder/tests/compositor/report.html`
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6334
|
|
|
|
Added a first test case for review. This will be the base for future test cases.
The current API is sufficient for what is expected for such a low level API.
One concern is that you need to trigger a save in order to update the library overrides
structure. Not expected from TD/Dev point of view.
Test cases are very important when implementing restrictive mode as it is a second evaluation mode that
has impact on the (current) permissive mode.
Reviewed By: Sebastián Barschkis, Bastien Montagne
Differential Revision: https://developer.blender.org/D10747
|
|
|
|
This checks the generated key-map data matches the result of
re-exporting and re-importing.
This shows up various inconsistencies, including:
- Unused keymaps.
- Unknown/unused data in the keymap.
- Event arguments that don't make sense.
- Event values that don't match the event type
(tweak direction on keyboard event for example).
|
|
Also replace WM_OT_read_factory_settings with WM_OT_read_homefile
so the preferences don't have to be reloaded.
|
|
When building `install`, linking blender_test fails because
test libraries do not exist. This happened on lite + Xcode. Error in
{rBdcb2821292f962951e88f146cb304160f21f73da}.
Reviewed By: #platform_macos, brecht
Differential Revision: https://developer.blender.org/D10607
|
|
|
|
MeshTest now compares selection between evaluated mesh and expected mesh. This way, we can test more operators
such as `faces_select_linked_flat`
Note: selection comparison intentionally does not happen in BKE_mesh_cmp() on C side but rather on Python side, because
selection is independent of mesh generation.
Reviewed By: calra, mont29
Differential Revision: https://developer.blender.org/D10279
|
|
Print number of total tests with each test to show how many tests have been executed and how many are left.
Example: `Running test 27/36: PlaneFaceSplitByEdges...`
Reviewed By: calra, mont29
Differential Revision: https://developer.blender.org/D10278
|
|
Tests are not identified with indexes, so no need to maintain comments with indexes anymore
Reviewed By: calra, mont29
Differential Revision: https://developer.blender.org/D10277
|
|
|
|
Don't force load _and_ link against a library in case
linker fails to deduplicate them.
https://devtalk.blender.org/t/macos-duplicate-symbol-errors/17343
Reviewed By: #platform_macos, brecht
Differential Revision: https://developer.blender.org/D10294
|
|
Differential Revision: https://developer.blender.org/D9990
|
|
These are now supported and so can be tested.
Also refactor the code a bit to move Cycles specific blacklist out of generic
render test code.
|
|
{rB6b5e4ad5899d} neglected to update the modifier tests to reflect
the fact that the default limit method is no longer "NONE".
|
|
Disable the Ocean Sim test when building with `WITH_MOD_OCEANSIM=OFF`.
|
|
Group all tests of a test suite into a single test command invocation.
This reduces the number of invocations by `ctest` by an order of
magnitude.
Since rB56aa5b0d8c6b663, `bin/tests/blender_test` was run for every
individual test. Having over a 1000 tests made testing slower than
necessary. Individual tests can still be run if desired by invocation of
`bin/tests/blender_test --gtest_filter=suitename.testname`.
NOTE: For this commit to have an immediate effect, it may be necessary
to remove the `tests` and `Testing` directories and some CMake files
from your build directory and rebuild. Run `ctest -N` to see the list of
tests; there should be less than 200.
Reviewed By: sergey, LazyDodo, sebbas
Maniphest Tasks: T83222
Differential Revision: https://developer.blender.org/D9649
|
|
|
|
When building opensubdiv with more aggressive optimization flags
(-march=native -02) the output meshes would differ a bit from what we
expected in the current automated modifier test file.
The differences in vertex position is within the 1e-6 range, which I
would call is acceptable for floats. In addition to this, all the
modifier test that tests the subdiv modifier in particular pass without
any modifications. I've updated two tests in the modifier test file and
script to make it pass (listed below).
Updated following test categories:
1. Decimate test
Here there was a subdiv modifier applied before the actual decimate
modifier. Because the decimate modifier creates a queue of potential
vertices it can remove, it is highly sensitive to even small changes as
it drastically changes in which order the vertices are decimated in.
As this test should only be testing the decimate modifier, I pre-applied
the subdiv modifier in the test file.
2. RandomCubeModifier
For these tests I removed the subdiv modifier as well. As with decimate,
a small change in vertex position here can lead to quite different
results.
Reviewed By: Sergey, Bastien
Differential Revision: http://developer.blender.org/D9004
|
|
This adds a basic set of tests for curve sampling and bevel generation.
At the moment there are basic test cases for bevels, caps, and the
filling of 2D curves, but more tests can be added in the future.
Curves are actually converted to "DispLists" for displaying them in the
viewport, so it's much simpler to rely on the mesh conversion operator
instead of building a new test framework for another data structure.
Differential Revision: https://developer.blender.org/D9958
|
|
|
|
|
|
This revision contains the following changes-
- Updated the existing testing framework for Modifiers for Regression
Testing.
- Tests for Physics modifiers and remaining Generate and Deform modifiers are added.
- The existing `ModifierSpec` is updated with backward compatibility to support Physics Modifiers.
- Now there is support for frame number and giving nested parameters for attributes.
- Some Deform modifiers required Object Operators, e.g. "Bind" in Mesh Deform, so a new class was added to support that functionality.
- A separate class for holding Particles System, they are tested by converting all the particles to mesh and joining it to the mesh they were added.
- Updated the format to add tests for Bevel, Boolean and Operators as
well.
Reviewed By: zazizizou, mont29, campbellbarton
Differential Revision: https://developer.blender.org/D8507
|
|
bl_blendfile_io & bl_blendfile_liblink shared a filename,
which could make these tests fail.
|
|
|
|
Add Custom Space to the list of space conversions for constraints.
Constraints can use World Space, Local Space, Pose Space, Local with
Parent, and now also Custom Space with a custom object to define the
evaluation space.
The Custom Space option uses the Local Space of an other
object/bone/vertex group. If selected on owner or target it will show a
box for object selection. If an armature is selected, then it will also
show a box for bone selection. If a mesh object is selected it will show
the option for using the local space of a vertex group.
Reviewed By: #animation_rigging, sybren, Severin, angavrilov
Differential Revision: https://developer.blender.org/D7437
|
|
Blacklist a bunch of tests on the GPU, which are known to currently have
differences with CPU. These can be enabled as they are fixed or the test
is modified to give compatible results when there are known limitations.
OSL tests were also moved to their own directory since those are not
supported on the GPU.
Ref T82193
|
|
CYCLES_TEST_DEVICES is a list of devices (CPU, CUDA, OPTIX, OPENCL). It is set
to CPU only by default.
Test output is now writen to build/tests/cycles/<device>, and the HTML report
has separate report pages for the different devices, with option to compare
between CPU and GPU renders.
Various GPU tests are still failing due to CPU/GPU differences, these are to be
fixed or blacklisted still.
Ref T82193
|
|
This new discontinuity filter performs actions on the entire Euler
rotation, rather than only on the individual X/Y/Z channels. This makes
it fix a wider range of discontinuities, for example those in T52744.
The filter now runs twice on the selected channels, in this order:
- New: Convert X+Y+Z rotation to matrix, then back to Euler angles.
- Old: Add/remove factors of 360° to minimize jumps.
The messaging is streamlined; it now reports how many channels were
filtered, and only warns (instead of errors) when there was an actual
problem with the selected channels (like selecting three or more
channels, but without X/Y/Z triplet).
A new kernel function `BKE_fcurve_keyframe_move_value_with_handles()` is
introduced, to make it possible to move a keyframe's value and move its
handles at the same time.
Manifest Task: T52744
Reviewed By: looch
Differential Revision: https://developer.blender.org/D9602
|
|
Expand unit test for `BKE_fcurve_active_keyframe_index()` to test edge
cases better.
This also introduces a new test macro `EXPECT_BLI_ASSERT()`, which can be
used to test that an assertion fails successfully.
No functional changes to actual Blender code.
|
|
It was missing from tests/report.html that gathers all tests reports.
|
|
Tests files are based on test from D8393
Test files should be in `lib\tests\sequence_editing`
These are files, I will add few more tests including animation test.
{F9155273}
Using generic tool to compare rendered vs reference image as other render engines.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9394
|
|
Don't override other `LSAN_OPTIONS` like suppression file set in
the environment variable.
Old code added in {rB38ff5064b33ccb8} and {rB5f4e99b7a2b8376}
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D9207
|
|
|
|
|
|
|
|
Fixes the failing tests and reintroduces the KD-Tree solution.
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D9013
|
|
|
|
More agressive optimization made the results differ a bit more than the
current error margin would allow. Bump the error margin to be 1e-6
instead of the previous 0.5e-7.
|
|
Set flags directly on the target, and use common function for all cases.
This refactoring helps with the next commit for test executables.
Ref D8714
|
|
|
|
Relax limits of FCurve Bézier handles during evaluation. FCurve handles
can be scaled down to avoid the curve looping backward in time. This
scaling was done correctly but over-carefully, posing unnecessary
limitations on the possible slope of FCurves. This commit changes the
scaling approach such that the FCurve can become near-vertical.
Bump Blender's subversion from 291.0.1 to 291.0.2 to ensure that older
animation files are correctly updated.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D8752
|
|
Write custom properties (aka ID properties) to Alembic, to the
`.userProperties` compound property.
Manifest Task: https://developer.blender.org/T50725
Scalar properties (so single-value/non-array properties) are written as
single-element array properties to Alembic. This is also what's done by
Houdini and Maya exporters, so it seems to be the standard way of doing
things. It also simplifies the implementation.
Two-dimensional arrays are flattened by concatenating all the numbers
into a single array. This is because ID properties have a limited type
system. This means that a 3x3 "matrix" could just as well be a list of
three 3D vectors.
Alembic has two container properties to store custom data:
- `.userProperties`, which is meant for properties that aren't
necessarily understood by other software packages, and
- `.arbGeomParams`, which can contain the same kind of data as
`.userProperties`, but can also specify that these vary per face of a
mesh. This property is mostly intended for renderers.
Most industry packages write their custom data to `.arbGeomParams`.
However, given their goals I feel that `.userProperties` is the more
appropriate one for Blender's ID Properties.
The code is a bit more involved than I would have liked. An
`ABCAbstractWriter` has a `uniqueptr` to its `CustomPropertiesExporter`,
but the `CustomPropertiesExporter` also has a pointer back to its owning
`ABCAbstractWriter`. It's the latter pointer that I'm not too happy
with, but it has a reason. Getting the aforementioned `.userProperties`
from the Alembic library will automatically create it if it doesn't
exist already. If it's not used to actually add custom properties to, it
will crash the Alembic CLI tools (and maybe others too). This is what
the pointer back to the `ABCAbstractWriter` is used for: to get the
`.userProperties` at the last moment, when it's 100% sure at least one
custom property will be written.
Differential Revision: https://developer.blender.org/D8869
Reviewed by: sergey, dbystedt
|
|
These were disabled in the newboolean merge commit.
This commit renables them, using the original 'FAST' solver
so that the result objects need not change.
A TODO to add more tests using the 'EXACT' solver,
though most functionality there is now covered by unit gtests.
|
|
This is for design task T67744, Boolean Redesign.
It adds a choice of solver to the Boolean modifier and the
Intersect (Boolean) and Intersect (Knife) tools.
The 'Fast' choice is the current Bmesh boolean.
The new 'Exact' choice is a more advanced algorithm that supports
overlapping geometry and uses more robust calculations, but is
slower than the Fast choice.
The default with this commit is set to 'Exact'. We can decide before
the 2.91 release whether or not this is the right choice, but this
choice now will get us more testing and feedback on the new code.
|
|
This adds a new `--debug-exit-on-error` flag. When it is set, Blender
will abort with a non-zero exit code when there are internal errors.
Currently, "internal errors" includes memory leaks detected by
guardedalloc and error/fatal log entries in clog.
The new flag is passed to Blender in various places where automated
tests are run. Furthermore, the `--debug-memory` flag is used in tests,
because that makes the verbose output more useful, when dealing
with memory leaks.
Reviewers: brecht, sergey
Differential Revision: https://developer.blender.org/D8665
|
|
This helps finding memory leaks in tests.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D8631
|
|
Convert all `subprocess.run()` arguments to string, to prevent breaking
"does this argument need quoting" checks on Windows.
|
|
Add a new depsgraph builder class that includes invisible objects and
use that in the Alembic exporter.
Alembic supports three options for visibility, "visible", "inherited",
and "hidden". This means that parents can be hidden and still have
visible children (contrary to USD, where invisibility is used to prune
an entire scene graph subtree). Because of this, the visibility is
stored on the transform node, as that represents the Object in Blender
and thus keeps the Alembic file as close to Blender's own structure as
possible.
Reviewed By: Sergey
Differential Revision: https://developer.blender.org/D8595
|