path: root/extern/draco/dracoenc/src/draco/compression/attributes/prediction_schemes/mesh_prediction_scheme_constrained_multi_parallelogram_encoder.h

// Copyright 2016 The Draco Authors.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//      http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
//
#ifndef DRACO_COMPRESSION_ATTRIBUTES_PREDICTION_SCHEMES_MESH_PREDICTION_SCHEME_CONSTRAINED_MULTI_PARALLELOGRAM_ENCODER_H_
#define DRACO_COMPRESSION_ATTRIBUTES_PREDICTION_SCHEMES_MESH_PREDICTION_SCHEME_CONSTRAINED_MULTI_PARALLELOGRAM_ENCODER_H_

#include <algorithm>
#include <cmath>

#include "draco/compression/attributes/prediction_schemes/mesh_prediction_scheme_constrained_multi_parallelogram_shared.h"
#include "draco/compression/attributes/prediction_schemes/mesh_prediction_scheme_encoder.h"
#include "draco/compression/attributes/prediction_schemes/mesh_prediction_scheme_parallelogram_shared.h"
#include "draco/compression/bit_coders/rans_bit_encoder.h"
#include "draco/compression/entropy/shannon_entropy.h"
#include "draco/core/varint_encoding.h"

namespace draco {

// Compared to standard multi-parallelogram, constrained multi-parallelogram can
// explicitly select which of the available parallelograms are going to be used
// for the prediction by marking crease edges between two triangles. This
// requires storing extra data, but it allows the predictor to avoid using
// parallelograms that would lead to poor predictions. For improved efficiency,
// our current implementation limits the maximum number of used parallelograms
// to four, which covers >95% of the cases (on average, there are only two
// parallelograms available for any given vertex).
// All bits of the explicitly chosen configuration are stored together in a
// single context chosen by the total number of parallelograms available to
// choose from.
template <typename DataTypeT, class TransformT, class MeshDataT>
class MeshPredictionSchemeConstrainedMultiParallelogramEncoder
    : public MeshPredictionSchemeEncoder<DataTypeT, TransformT, MeshDataT> {
 public:
  using CorrType =
      typename PredictionSchemeEncoder<DataTypeT, TransformT>::CorrType;
  using CornerTable = typename MeshDataT::CornerTable;

  explicit MeshPredictionSchemeConstrainedMultiParallelogramEncoder(
      const PointAttribute *attribute)
      : MeshPredictionSchemeEncoder<DataTypeT, TransformT, MeshDataT>(
            attribute),
        selected_mode_(Mode::OPTIMAL_MULTI_PARALLELOGRAM) {}
  MeshPredictionSchemeConstrainedMultiParallelogramEncoder(
      const PointAttribute *attribute, const TransformT &transform,
      const MeshDataT &mesh_data)
      : MeshPredictionSchemeEncoder<DataTypeT, TransformT, MeshDataT>(
            attribute, transform, mesh_data),
        selected_mode_(Mode::OPTIMAL_MULTI_PARALLELOGRAM) {}

  bool ComputeCorrectionValues(
      const DataTypeT *in_data, CorrType *out_corr, int size,
      int num_components, const PointIndex *entry_to_point_id_map) override;

  bool EncodePredictionData(EncoderBuffer *buffer) override;

  PredictionSchemeMethod GetPredictionMethod() const override {
    return MESH_PREDICTION_CONSTRAINED_MULTI_PARALLELOGRAM;
  }

  bool IsInitialized() const override {
    return this->mesh_data().IsInitialized();
  }

 private:
  // Function used to compute number of bits needed to store overhead of the
  // predictor. In this case, we consider overhead to be all bits that mark
  // whether a parallelogram should be used for prediction or not. The input
  // to this method is the total number of parallelograms that were evaluated so
  // far(total_parallelogram), and the number of parallelograms we decided to
  // use for prediction (total_used_parallelograms).
  // Returns number of bits required to store the overhead.
  int64_t ComputeOverheadBits(int64_t total_used_parallelograms,
                              int64_t total_parallelogram) const {
    // For now we assume RAns coding for the bits where the total required size
    // is directly correlated to the binary entropy of the input stream.
    // TODO(ostava): This should be generalized in case we use other binary
    // coding scheme.
    const double entropy = ComputeBinaryShannonEntropy(
        static_cast<uint32_t>(total_parallelogram),
        static_cast<uint32_t>(total_used_parallelograms));

    // Round up to the nearest full bit.
    return static_cast<int64_t>(
        ceil(static_cast<double>(total_parallelogram) * entropy));
  }

  // Struct that contains data used for measuring the error of each available
  // parallelogram configuration.
  struct Error {
    Error() : num_bits(0), residual_error(0) {}

    // Primary metric: number of bits required to store the data as a result of
    // the selected prediction configuration.
    int num_bits;
    // Secondary metric: absolute difference of residuals for the given
    // configuration.
    int residual_error;

    bool operator<(const Error &e) const {
      if (num_bits < e.num_bits)
        return true;
      if (num_bits > e.num_bits)
        return false;
      return residual_error < e.residual_error;
    }
  };

  // Computes error for predicting |predicted_val| instead of |actual_val|.
  // Error is computed as the number of bits needed to encode the difference
  // between the values.
  Error ComputeError(const DataTypeT *predicted_val,
                     const DataTypeT *actual_val, int *out_residuals,
                     int num_components) {
    Error error;

    for (int i = 0; i < num_components; ++i) {
      const int dif = (predicted_val[i] - actual_val[i]);
      error.residual_error += std::abs(dif);
      out_residuals[i] = dif;
      // Entropy needs unsigned symbols, so convert the signed difference to an
      // unsigned symbol.
      entropy_symbols_[i] = ConvertSignedIntToSymbol(dif);
    }

    // Generate entropy data for case that this configuration was used.
    // Note that the entropy stream is NOT updated in this case.
    const auto entropy_data =
        entropy_tracker_.Peek(entropy_symbols_.data(), num_components);

    error.num_bits = entropy_tracker_.GetNumberOfDataBits(entropy_data) +
                     entropy_tracker_.GetNumberOfRAnsTableBits(entropy_data);
    return error;
  }

  typedef constrained_multi_parallelogram::Mode Mode;
  static constexpr int kMaxNumParallelograms =
      constrained_multi_parallelogram::kMaxNumParallelograms;
  // Crease edges are used to store whether any given edge should be used for
  // parallelogram prediction or not. New values are added in the order in which
  // the edges are processed. For better compression, the flags are stored in
  // in separate contexts based on the number of available parallelograms at a
  // given vertex.
  // TODO(draco-eng) reconsider std::vector<bool> (performance/space).
  std::vector<bool> is_crease_edge_[kMaxNumParallelograms];
  Mode selected_mode_;

  ShannonEntropyTracker entropy_tracker_;

  // Temporary storage for symbols that are fed into the |entropy_stream|.
  // Always contains only |num_components| entries.
  std::vector<uint32_t> entropy_symbols_;
};

template <typename DataTypeT, class TransformT, class MeshDataT>
bool MeshPredictionSchemeConstrainedMultiParallelogramEncoder<
    DataTypeT, TransformT, MeshDataT>::
    ComputeCorrectionValues(const DataTypeT *in_data, CorrType *out_corr,
                            int size, int num_components,
                            const PointIndex * /* entry_to_point_id_map */) {
  this->transform().Init(in_data, size, num_components);
  const CornerTable *const table = this->mesh_data().corner_table();
  const std::vector<int32_t> *const vertex_to_data_map =
      this->mesh_data().vertex_to_data_map();

  // Predicted values for all simple parallelograms encountered at any given
  // vertex.
  std::vector<DataTypeT> pred_vals[kMaxNumParallelograms];
  for (int i = 0; i < kMaxNumParallelograms; ++i) {
    pred_vals[i].resize(num_components);
  }
  // Used to store predicted value for various multi-parallelogram predictions
  // (combinations of simple parallelogram predictions).
  std::vector<DataTypeT> multi_pred_vals(num_components);
  entropy_symbols_.resize(num_components);

  // Struct for holding data about prediction configuration for different sets
  // of used parallelograms.
  struct PredictionConfiguration {
    PredictionConfiguration()
        : error(), configuration(0), num_used_parallelograms(0) {}
    Error error;
    uint8_t configuration;  // Bitfield, 1 use parallelogram, 0 don't use it.
    int num_used_parallelograms;
    std::vector<DataTypeT> predicted_value;
    std::vector<int32_t> residuals;
  };

  // Bit-field used for computing permutations of excluded edges
  // (parallelograms).
  bool exluded_parallelograms[kMaxNumParallelograms];

  // Data about the number of used parallelogram and total number of available
  // parallelogram for each context. Used to compute overhead needed for storing
  // the parallelogram choices made by the encoder.
  int64_t total_used_parallelograms[kMaxNumParallelograms] = {0};
  int64_t total_parallelograms[kMaxNumParallelograms] = {0};

  std::vector<int> current_residuals(num_components);

  // We start processing the vertices from the end because this prediction uses
  // data from previous entries that could be overwritten when an entry is
  // processed.
  for (int p =
           static_cast<int>(this->mesh_data().data_to_corner_map()->size()) - 1;
       p > 0; --p) {
    const CornerIndex start_corner_id =
        this->mesh_data().data_to_corner_map()->at(p);

    // Go over all corners attached to the vertex and compute the predicted
    // value from the parallelograms defined by their opposite faces.
    CornerIndex corner_id(start_corner_id);
    int num_parallelograms = 0;
    bool first_pass = true;
    while (corner_id != kInvalidCornerIndex) {
      if (ComputeParallelogramPrediction(
              p, corner_id, table, *vertex_to_data_map, in_data, num_components,
              &(pred_vals[num_parallelograms][0]))) {
        // Parallelogram prediction applied and stored in
        // |pred_vals[num_parallelograms]|
        ++num_parallelograms;
        // Stop processing when we reach the maximum number of allowed
        // parallelograms.
        if (num_parallelograms == kMaxNumParallelograms)
          break;
      }

      // Proceed to the next corner attached to the vertex. First swing left
      // and if we reach a boundary, swing right from the start corner.
      if (first_pass) {
        corner_id = table->SwingLeft(corner_id);
      } else {
        corner_id = table->SwingRight(corner_id);
      }
      if (corner_id == start_corner_id) {
        break;
      }
      if (corner_id == kInvalidCornerIndex && first_pass) {
        first_pass = false;
        corner_id = table->SwingRight(start_corner_id);
      }
    }

    // Offset to the target (destination) vertex.
    const int dst_offset = p * num_components;
    Error error;

    // Compute all prediction errors for all possible configurations of
    // available parallelograms.

    // Variable for holding the best configuration that has been found so far.
    PredictionConfiguration best_prediction;

    // Compute delta coding error (configuration when no parallelogram is
    // selected).
    const int src_offset = (p - 1) * num_components;
    error = ComputeError(in_data + src_offset, in_data + dst_offset,
                         &current_residuals[0], num_components);

    if (num_parallelograms > 0) {
      total_parallelograms[num_parallelograms - 1] += num_parallelograms;
      const int64_t new_overhead_bits =
          ComputeOverheadBits(total_used_parallelograms[num_parallelograms - 1],
                              total_parallelograms[num_parallelograms - 1]);
      error.num_bits += new_overhead_bits;
    }

    best_prediction.error = error;
    best_prediction.configuration = 0;
    best_prediction.num_used_parallelograms = 0;
    best_prediction.predicted_value.assign(
        in_data + src_offset, in_data + src_offset + num_components);
    best_prediction.residuals.assign(current_residuals.begin(),
                                     current_residuals.end());

    // Compute prediction error for different cases of used parallelograms.
    for (int num_used_parallelograms = 1;
         num_used_parallelograms <= num_parallelograms;
         ++num_used_parallelograms) {
      // Mark all parallelograms as excluded.
      std::fill(exluded_parallelograms,
                exluded_parallelograms + num_parallelograms, true);
      // TODO(draco-eng) maybe this should be another std::fill.
      // Mark the first |num_used_parallelograms| as not excluded.
      for (int j = 0; j < num_used_parallelograms; ++j) {
        exluded_parallelograms[j] = false;
      }
      // Permute over the excluded edges and compute error for each
      // configuration (permutation of excluded parallelograms).
      do {
        // Reset the multi-parallelogram predicted values.
        for (int j = 0; j < num_components; ++j) {
          multi_pred_vals[j] = 0;
        }
        uint8_t configuration = 0;
        for (int j = 0; j < num_parallelograms; ++j) {
          if (exluded_parallelograms[j])
            continue;
          for (int c = 0; c < num_components; ++c) {
            multi_pred_vals[c] += pred_vals[j][c];
          }
          // Set jth bit of the configuration.
          configuration |= (1 << j);
        }

        for (int j = 0; j < num_components; ++j) {
          multi_pred_vals[j] /= num_used_parallelograms;
        }
        error = ComputeError(multi_pred_vals.data(), in_data + dst_offset,
                             &current_residuals[0], num_components);
        if (num_parallelograms > 0) {
          const int64_t new_overhead_bits = ComputeOverheadBits(
              total_used_parallelograms[num_parallelograms - 1] +
                  num_used_parallelograms,
              total_parallelograms[num_parallelograms - 1]);

          // Add overhead bits to the total error.
          error.num_bits += new_overhead_bits;
        }
        if (error < best_prediction.error) {
          best_prediction.error = error;
          best_prediction.configuration = configuration;
          best_prediction.num_used_parallelograms = num_used_parallelograms;
          best_prediction.predicted_value.assign(multi_pred_vals.begin(),
                                                 multi_pred_vals.end());
          best_prediction.residuals.assign(current_residuals.begin(),
                                           current_residuals.end());
        }
      } while (std::next_permutation(
          exluded_parallelograms, exluded_parallelograms + num_parallelograms));
    }
    if (num_parallelograms > 0) {
      total_used_parallelograms[num_parallelograms - 1] +=
          best_prediction.num_used_parallelograms;
    }

    // Update the entropy stream by adding selected residuals as symbols to the
    // stream.
    for (int i = 0; i < num_components; ++i) {
      entropy_symbols_[i] =
          ConvertSignedIntToSymbol(best_prediction.residuals[i]);
    }
    entropy_tracker_.Push(entropy_symbols_.data(), num_components);

    for (int i = 0; i < num_parallelograms; ++i) {
      if ((best_prediction.configuration & (1 << i)) == 0) {
        // Parallelogram not used, mark the edge as crease.
        is_crease_edge_[num_parallelograms - 1].push_back(true);
      } else {
        // Parallelogram used. Add it to the predicted value and mark the
        // edge as not a crease.
        is_crease_edge_[num_parallelograms - 1].push_back(false);
      }
    }
    this->transform().ComputeCorrection(in_data + dst_offset,
                                        best_prediction.predicted_value.data(),
                                        out_corr + dst_offset);
  }
  // First element is always fixed because it cannot be predicted.
  for (int i = 0; i < num_components; ++i) {
    pred_vals[0][i] = static_cast<DataTypeT>(0);
  }
  this->transform().ComputeCorrection(in_data, pred_vals[0].data(), out_corr);
  return true;
}

template <typename DataTypeT, class TransformT, class MeshDataT>
bool MeshPredictionSchemeConstrainedMultiParallelogramEncoder<
    DataTypeT, TransformT, MeshDataT>::EncodePredictionData(EncoderBuffer
                                                                *buffer) {
  // Encode selected edges using separate rans bit coder for each context.
  for (int i = 0; i < kMaxNumParallelograms; ++i) {
    // |i| is the context based on the number of available parallelograms, which
    // is always equal to |i + 1|.
    const int num_used_parallelograms = i + 1;
    EncodeVarint<uint32_t>(is_crease_edge_[i].size(), buffer);
    if (is_crease_edge_[i].size()) {
      RAnsBitEncoder encoder;
      encoder.StartEncoding();
      // Encode the crease edge flags in the reverse vertex order that is needed
      // be the decoder. Note that for the currently supported mode, each vertex
      // has exactly |num_used_parallelograms| edges that need to be encoded.
      for (int j = static_cast<int>(is_crease_edge_[i].size()) -
                   num_used_parallelograms;
           j >= 0; j -= num_used_parallelograms) {
        // Go over all edges of the current vertex.
        for (int k = 0; k < num_used_parallelograms; ++k) {
          encoder.EncodeBit(is_crease_edge_[i][j + k]);
        }
      }
      encoder.EndEncoding(buffer);
    }
  }
  return MeshPredictionSchemeEncoder<DataTypeT, TransformT,
                                     MeshDataT>::EncodePredictionData(buffer);
}

}  // namespace draco

#endif  // DRACO_COMPRESSION_ATTRIBUTES_PREDICTION_SCHEMES_MESH_PREDICTION_SCHEME_CONSTRAINED_MULTI_PARALLELOGRAM_ENCODER_H_