Merge branch 'ms/send-email-feed-header-to-validate-hook'

"git send-email" learned to give the e-mail headers to the validate
hook by passing an extra argument from the command line.

* ms/send-email-feed-header-to-validate-hook:
  send-email: expose header information to git-send-email's sendemail-validate hook
  send-email: refactor header generation functions

1 files changed, 60 insertions, 37 deletions

diff --git a/git-send-email.perl b/git-send-email.perl
index 66c9171109..26e18eebd9 100755
--- a/git-send-email.perl
+++ b/git-send-email.perl
@@ -792,7 +792,19 @@ if (@rev_list_opts) {
 				    @rev_list_opts);
 }
 
-@files = handle_backup_files(@files);
+if (defined $sender) {
+	$sender =~ s/^\s+|\s+$//g;
+	($sender) = expand_aliases($sender);
+} else {
+	$sender = $repoauthor->() || $repocommitter->() || '';
+}
+
+# $sender could be an already sanitized address
+# (e.g. sendemail.from could be manually sanitized by user).
+# But it's a no-op to run sanitize_address on an already sanitized address.
+$sender = sanitize_address($sender);
+
+$time = time - scalar $#files;
 
 if ($validate) {
 	# FIFOs can only be read once, exclude them from validation.
@@ -810,6 +822,7 @@ if ($validate) {
 	$ENV{GIT_SENDEMAIL_FILE_TOTAL} = "$num_files";
 	foreach my $r (@real_files) {
 		$ENV{GIT_SENDEMAIL_FILE_COUNTER} = "$num";
+		pre_process_file($r, 1);
 		validate_patch($r, $target_xfer_encoding);
 		$num += 1;
 	}
@@ -817,6 +830,8 @@ if ($validate) {
 	delete $ENV{GIT_SENDEMAIL_FILE_TOTAL};
 }
 
+@files = handle_backup_files(@files);
+
 if (@files) {
 	unless ($quiet) {
 		print $_,"\n" for (@files);
@@ -1065,18 +1080,6 @@ if (!$force) {
 	}
 }
 
-if (defined $sender) {
-	$sender =~ s/^\s+|\s+$//g;
-	($sender) = expand_aliases($sender);
-} else {
-	$sender = $repoauthor->() || $repocommitter->() || '';
-}
-
-# $sender could be an already sanitized address
-# (e.g. sendemail.from could be manually sanitized by user).
-# But it's a no-op to run sanitize_address on an already sanitized address.
-$sender = sanitize_address($sender);
-
 my $to_whom = __("To whom should the emails be sent (if anyone)?");
 my $prompting = 0;
 if (!@initial_to && !defined $to_cmd) {
@@ -1236,10 +1239,6 @@ sub make_message_id {
 	#print "new message id = $message_id\n"; # Was useful for debugging
 }
 
-
-
-$time = time - scalar $#files;
-
 sub unquote_rfc2047 {
 	local ($_) = @_;
 	my $charset;
@@ -1517,16 +1516,7 @@ sub file_name_is_absolute {
 	return File::Spec::Functions::file_name_is_absolute($path);
 }
 
-# Prepares the email, then asks the user what to do.
-#
-# If the user chooses to send the email, it's sent and 1 is returned.
-# If the user chooses not to send the email, 0 is returned.
-# If the user decides they want to make further edits, -1 is returned and the
-# caller is expected to call send_message again after the edits are performed.
-#
-# If an error occurs sending the email, this just dies.
-
-sub send_message {
+sub gen_header {
 	my @recipients = unique_email_list(@to);
 	@cc = (grep { my $cc = extract_valid_address_or_die($_);
 		      not grep { $cc eq $_ || $_ =~ /<\Q${cc}\E>$/ } @recipients
@@ -1568,6 +1558,22 @@ Message-ID: $message_id
 	if (@xh) {
 		$header .= join("\n", @xh) . "\n";
 	}
+	my $recipients_ref = \@recipients;
+	return ($recipients_ref, $to, $date, $gitversion, $cc, $ccline, $header);
+}
+
+# Prepares the email, then asks the user what to do.
+#
+# If the user chooses to send the email, it's sent and 1 is returned.
+# If the user chooses not to send the email, 0 is returned.
+# If the user decides they want to make further edits, -1 is returned and the
+# caller is expected to call send_message again after the edits are performed.
+#
+# If an error occurs sending the email, this just dies.
+
+sub send_message {
+	my ($recipients_ref, $to, $date, $gitversion, $cc, $ccline, $header) = gen_header();
+	my @recipients = @$recipients_ref;
 
 	my @sendmail_parameters = ('-i', @recipients);
 	my $raw_from = $sender;
@@ -1757,11 +1763,8 @@ $in_reply_to = $initial_in_reply_to;
 $references = $initial_in_reply_to || '';
 $message_num = 0;
 
-# Prepares the email, prompts the user, sends it out
-# Returns 0 if an edit was done and the function should be called again, or 1
-# otherwise.
-sub process_file {
-	my ($t) = @_;
+sub pre_process_file {
+	my ($t, $quiet) = @_;
 
 	open my $fh, "<", $t or die sprintf(__("can't open file %s"), $t);
 
@@ -1915,9 +1918,9 @@ sub process_file {
 	}
 	close $fh;
 
-	push @to, recipients_cmd("to-cmd", "to", $to_cmd, $t)
+	push @to, recipients_cmd("to-cmd", "to", $to_cmd, $t, $quiet)
 		if defined $to_cmd;
-	push @cc, recipients_cmd("cc-cmd", "cc", $cc_cmd, $t)
+	push @cc, recipients_cmd("cc-cmd", "cc", $cc_cmd, $t, $quiet)
 		if defined $cc_cmd && !$suppress_cc{'cccmd'};
 
 	if ($broken_encoding{$t} && !$has_content_type) {
@@ -1976,6 +1979,15 @@ sub process_file {
 			@initial_to = @to;
 		}
 	}
+}
+
+# Prepares the email, prompts the user, and sends it out
+# Returns 0 if an edit was done and the function should be called again, or 1
+# on the email being successfully sent out.
+sub process_file {
+	my ($t) = @_;
+
+        pre_process_file($t, $quiet);
 
 	my $message_was_sent = send_message();
 	if ($message_was_sent == -1) {
@@ -2024,7 +2036,7 @@ foreach my $t (@files) {
 # Execute a command (e.g. $to_cmd) to get a list of email addresses
 # and return a results array
 sub recipients_cmd {
-	my ($prefix, $what, $cmd, $file) = @_;
+	my ($prefix, $what, $cmd, $file, $quiet) = @_;
 
 	my @addresses = ();
 	open my $fh, "-|", "$cmd \Q$file\E"
@@ -2110,10 +2122,21 @@ sub validate_patch {
 			chdir($repo->wc_path() or $repo->repo_path())
 				or die("chdir: $!");
 			local $ENV{"GIT_DIR"} = $repo->repo_path();
+
+			my ($recipients_ref, $to, $date, $gitversion, $cc, $ccline, $header) = gen_header();
+
+			require File::Temp;
+			my ($header_filehandle, $header_filename) = File::Temp::tempfile(
+                            TEMPLATE => ".gitsendemail.header.XXXXXX",
+                            DIR => $repo->repo_path(),
+                            UNLINK => 1,
+                        );
+			print $header_filehandle $header;
+
 			my @cmd = ("git", "hook", "run", "--ignore-missing",
 				    $hook_name, "--");
-			my @cmd_msg = (@cmd, "<patch>");
-			my @cmd_run = (@cmd, $target);
+			my @cmd_msg = (@cmd, "<patch>", "<header>");
+			my @cmd_run = (@cmd, $target, $header_filename);
 			$hook_error = system_or_msg(\@cmd_run, undef, "@cmd_msg");
 			chdir($cwd_save) or die("chdir: $!");
 		}