diff options
65 files changed, 1917 insertions, 661 deletions
diff --git a/.gitignore b/.gitignore index 4470d7cfc0..40326140c7 100644 --- a/.gitignore +++ b/.gitignore @@ -139,6 +139,7 @@ /git-request-pull /git-rerere /git-reset +/git-restore /git-rev-list /git-rev-parse /git-revert @@ -163,6 +164,7 @@ /git-submodule /git-submodule--helper /git-svn +/git-switch /git-symbolic-ref /git-tag /git-unpack-file diff --git a/Documentation/config/advice.txt b/Documentation/config/advice.txt index ec4f6ae658..d5fd05ce81 100644 --- a/Documentation/config/advice.txt +++ b/Documentation/config/advice.txt @@ -42,7 +42,8 @@ advice.*:: state in the output of linkgit:git-status[1], in the template shown when writing commit messages in linkgit:git-commit[1], and in the help message shown - by linkgit:git-checkout[1] when switching branch. + by linkgit:git-switch[1] or + linkgit:git-checkout[1] when switching branch. statusUoption:: Advise to consider using the `-u` option to linkgit:git-status[1] when the command takes more than 2 seconds to enumerate untracked @@ -62,12 +63,14 @@ advice.*:: your information is guessed from the system username and domain name. detachedHead:: - Advice shown when you used linkgit:git-checkout[1] to - move to the detach HEAD state, to instruct how to create - a local branch after the fact. + Advice shown when you used + linkgit:git-switch[1] or linkgit:git-checkout[1] + to move to the detach HEAD state, to instruct how to + create a local branch after the fact. checkoutAmbiguousRemoteBranchName:: Advice shown when the argument to - linkgit:git-checkout[1] ambiguously resolves to a + linkgit:git-checkout[1] and linkgit:git-switch[1] + ambiguously resolves to a remote tracking branch on more than one remote in situations where an unambiguous argument would have otherwise caused a remote-tracking branch to be diff --git a/Documentation/config/branch.txt b/Documentation/config/branch.txt index 8f4b3faadd..a592d522a7 100644 --- a/Documentation/config/branch.txt +++ b/Documentation/config/branch.txt @@ -1,5 +1,5 @@ branch.autoSetupMerge:: - Tells 'git branch' and 'git checkout' to set up new branches + Tells 'git branch', 'git switch' and 'git checkout' to set up new branches so that linkgit:git-pull[1] will appropriately merge from the starting point branch. Note that even if this option is not set, this behavior can be chosen per-branch using the `--track` @@ -11,7 +11,7 @@ branch.autoSetupMerge:: branch. This option defaults to true. branch.autoSetupRebase:: - When a new branch is created with 'git branch' or 'git checkout' + When a new branch is created with 'git branch', 'git switch' or 'git checkout' that tracks another branch, this variable tells Git to set up pull to rebase instead of merge (see "branch.<name>.rebase"). When `never`, rebase is never automatically set to true. diff --git a/Documentation/config/checkout.txt b/Documentation/config/checkout.txt index c4118fa196..6b646813ab 100644 --- a/Documentation/config/checkout.txt +++ b/Documentation/config/checkout.txt @@ -1,5 +1,6 @@ checkout.defaultRemote:: - When you run 'git checkout <something>' and only have one + When you run 'git checkout <something>' + or 'git switch <something>' and only have one remote, it may implicitly fall back on checking out and tracking e.g. 'origin/<something>'. This stops working as soon as you have more than one remote with a '<something>' @@ -8,16 +9,10 @@ checkout.defaultRemote:: disambiguation. The typical use-case is to set this to `origin`. + -Currently this is used by linkgit:git-checkout[1] when 'git checkout -<something>' will checkout the '<something>' branch on another remote, +Currently this is used by linkgit:git-switch[1] and +linkgit:git-checkout[1] when 'git checkout <something>' +or 'git switch <something>' +will checkout the '<something>' branch on another remote, and by linkgit:git-worktree[1] when 'git worktree add' refers to a remote branch. This setting might be used for other checkout-like commands or functionality in the future. - -checkout.optimizeNewBranch:: - Optimizes the performance of "git checkout -b <new_branch>" when - using sparse-checkout. When set to true, git will not update the - repo based on the current sparse-checkout settings. This means it - will not update the skip-worktree bit in the index nor add/remove - files in the working directory to reflect the current sparse checkout - settings nor will it show the local changes. diff --git a/Documentation/config/diff.txt b/Documentation/config/diff.txt index 2c4c9ba27a..5afb5a2cbc 100644 --- a/Documentation/config/diff.txt +++ b/Documentation/config/diff.txt @@ -78,7 +78,8 @@ diff.external:: diff.ignoreSubmodules:: Sets the default value of --ignore-submodules. Note that this affects only 'git diff' Porcelain, and not lower level 'diff' - commands such as 'git diff-files'. 'git checkout' also honors + commands such as 'git diff-files'. 'git checkout' + and 'git switch' also honor this setting when reporting uncommitted changes. Setting it to 'all' disables the submodule summary normally shown by 'git commit' and 'git status' when `status.submoduleSummary` is set unless it is diff --git a/Documentation/config/interactive.txt b/Documentation/config/interactive.txt index ad846dd7c9..a2d3c7ec44 100644 --- a/Documentation/config/interactive.txt +++ b/Documentation/config/interactive.txt @@ -2,7 +2,8 @@ interactive.singleKey:: In interactive commands, allow the user to provide one-letter input with a single key (i.e., without hitting enter). Currently this is used by the `--patch` mode of - linkgit:git-add[1], linkgit:git-checkout[1], linkgit:git-commit[1], + linkgit:git-add[1], linkgit:git-checkout[1], + linkgit:git-restore[1], linkgit:git-commit[1], linkgit:git-reset[1], and linkgit:git-stash[1]. Note that this setting is silently ignored if portable keystroke input is not available; requires the Perl module Term::ReadKey. diff --git a/Documentation/git-branch.txt b/Documentation/git-branch.txt index 16e14c6282..135206ff4a 100644 --- a/Documentation/git-branch.txt +++ b/Documentation/git-branch.txt @@ -60,7 +60,7 @@ can leave out at most one of `A` and `B`, in which case it defaults to `HEAD`. Note that this will create the new branch, but it will not switch the -working tree to it; use "git checkout <newbranch>" to switch to the +working tree to it; use "git switch <newbranch>" to switch to the new branch. When a local branch is started off a remote-tracking branch, Git sets up the @@ -214,7 +214,7 @@ This option is only applicable in non-verbose mode. + This behavior is the default when the start point is a remote-tracking branch. Set the branch.autoSetupMerge configuration variable to `false` if you -want `git checkout` and `git branch` to always behave as if `--no-track` +want `git switch`, `git checkout` and `git branch` to always behave as if `--no-track` were given. Set it to `always` if you want this behavior when the start-point is either a local or remote-tracking branch. @@ -313,7 +313,7 @@ Start development from a known tag:: $ git clone git://git.kernel.org/pub/scm/.../linux-2.6 my2.6 $ cd my2.6 $ git branch my2.6.14 v2.6.14 <1> -$ git checkout my2.6.14 +$ git switch my2.6.14 ------------ + <1> This step and the next one could be combined into a single step with @@ -350,9 +350,9 @@ Patterns will normally need quoting. NOTES ----- -If you are creating a branch that you want to checkout immediately, it is -easier to use the git checkout command with its `-b` option to create -a branch and check it out with a single command. +If you are creating a branch that you want to switch to immediately, +it is easier to use the "git switch" command with its `-c` option to +do the same thing with a single command. The options `--contains`, `--no-contains`, `--merged` and `--no-merged` serve four related but different purposes: diff --git a/Documentation/git-check-ref-format.txt b/Documentation/git-check-ref-format.txt index d9de992585..ee6a4144fb 100644 --- a/Documentation/git-check-ref-format.txt +++ b/Documentation/git-check-ref-format.txt @@ -88,7 +88,8 @@ but it is explicitly forbidden at the beginning of a branch name). When run with `--branch` option in a repository, the input is first expanded for the ``previous checkout syntax'' `@{-n}`. For example, `@{-1}` is a way to refer the last thing that -was checked out using "git checkout" operation. This option should be +was checked out using "git switch" or "git checkout" operation. +This option should be used by porcelains to accept this syntax anywhere a branch name is expected, so they can act as if you typed the branch name. As an exception note that, the ``previous checkout operation'' might result diff --git a/Documentation/git-checkout.txt b/Documentation/git-checkout.txt index 964f912d29..cf3cac0a2b 100644 --- a/Documentation/git-checkout.txt +++ b/Documentation/git-checkout.txt @@ -23,31 +23,22 @@ or the specified tree. If no paths are given, 'git checkout' will also update `HEAD` to set the specified branch as the current branch. -'git checkout' <branch>:: - To prepare for working on <branch>, switch to it by updating +'git checkout' [<branch>]:: + To prepare for working on `<branch>`, switch to it by updating the index and the files in the working tree, and by pointing - HEAD at the branch. Local modifications to the files in the + `HEAD` at the branch. Local modifications to the files in the working tree are kept, so that they can be committed to the - <branch>. + `<branch>`. + -If <branch> is not found but there does exist a tracking branch in -exactly one remote (call it <remote>) with a matching name, treat as -equivalent to +If `<branch>` is not found but there does exist a tracking branch in +exactly one remote (call it `<remote>`) with a matching name and +`--no-guess` is not specified, treat as equivalent to + ------------ $ git checkout -b <branch> --track <remote>/<branch> ------------ + -If the branch exists in multiple remotes and one of them is named by -the `checkout.defaultRemote` configuration variable, we'll use that -one for the purposes of disambiguation, even if the `<branch>` isn't -unique across all remotes. Set it to -e.g. `checkout.defaultRemote=origin` to always checkout remote -branches from there if `<branch>` is ambiguous but exists on the -'origin' remote. See also `checkout.defaultRemote` in -linkgit:git-config[1]. -+ -You could omit <branch>, in which case the command degenerates to +You could omit `<branch>`, in which case the command degenerates to "check out the current branch", which is a glorified no-op with rather expensive side-effects to show only the tracking information, if exists, for the current branch. @@ -61,7 +52,7 @@ if exists, for the current branch. `--track` without `-b` implies branch creation; see the description of `--track` below. + -If `-B` is given, <new_branch> is created if it doesn't exist; otherwise, it +If `-B` is given, `<new_branch>` is created if it doesn't exist; otherwise, it is reset. This is the transactional equivalent of + ------------ @@ -75,25 +66,25 @@ successful. 'git checkout' --detach [<branch>]:: 'git checkout' [--detach] <commit>:: - Prepare to work on top of <commit>, by detaching HEAD at it + Prepare to work on top of `<commit>`, by detaching `HEAD` at it (see "DETACHED HEAD" section), and updating the index and the files in the working tree. Local modifications to the files in the working tree are kept, so that the resulting working tree will be the state recorded in the commit plus the local modifications. + -When the <commit> argument is a branch name, the `--detach` option can -be used to detach HEAD at the tip of the branch (`git checkout -<branch>` would check out that branch without detaching HEAD). +When the `<commit>` argument is a branch name, the `--detach` option can +be used to detach `HEAD` at the tip of the branch (`git checkout +<branch>` would check out that branch without detaching `HEAD`). + -Omitting <branch> detaches HEAD at the tip of the current branch. +Omitting `<branch>` detaches `HEAD` at the tip of the current branch. 'git checkout' [<tree-ish>] [--] <pathspec>...:: Overwrite paths in the working tree by replacing with the - contents in the index or in the <tree-ish> (most often a - commit). When a <tree-ish> is given, the paths that - match the <pathspec> are updated both in the index and in + contents in the index or in the `<tree-ish>` (most often a + commit). When a `<tree-ish>` is given, the paths that + match the `<pathspec>` are updated both in the index and in the working tree. + The index may contain unmerged entries because of a previous failed merge. @@ -118,7 +109,8 @@ OPTIONS --quiet:: Quiet, suppress feedback messages. ---[no-]progress:: +--progress:: +--no-progress:: Progress status is reported on the standard error stream by default when it is attached to a terminal, unless `--quiet` is specified. This flag enables progress reporting even if not @@ -127,7 +119,7 @@ OPTIONS -f:: --force:: When switching branches, proceed even if the index or the - working tree differs from HEAD. This is used to throw away + working tree differs from `HEAD`. This is used to throw away local changes. + When checking out paths from the index, do not fail upon unmerged @@ -154,12 +146,12 @@ on your side branch as `theirs` (i.e. "one contributor's work on top of it"). -b <new_branch>:: - Create a new branch named <new_branch> and start it at - <start_point>; see linkgit:git-branch[1] for details. + Create a new branch named `<new_branch>` and start it at + `<start_point>`; see linkgit:git-branch[1] for details. -B <new_branch>:: - Creates the branch <new_branch> and start it at <start_point>; - if it already exists, then reset it to <start_point>. This is + Creates the branch `<new_branch>` and start it at `<start_point>`; + if it already exists, then reset it to `<start_point>`. This is equivalent to running "git branch" with "-f"; see linkgit:git-branch[1] for details. @@ -172,15 +164,36 @@ If no `-b` option is given, the name of the new branch will be derived from the remote-tracking branch, by looking at the local part of the refspec configured for the corresponding remote, and then stripping the initial part up to the "*". -This would tell us to use "hack" as the local branch when branching -off of "origin/hack" (or "remotes/origin/hack", or even -"refs/remotes/origin/hack"). If the given name has no slash, or the above +This would tell us to use `hack` as the local branch when branching +off of `origin/hack` (or `remotes/origin/hack`, or even +`refs/remotes/origin/hack`). If the given name has no slash, or the above guessing results in an empty name, the guessing is aborted. You can explicitly give a name with `-b` in such a case. --no-track:: Do not set up "upstream" configuration, even if the - branch.autoSetupMerge configuration variable is true. + `branch.autoSetupMerge` configuration variable is true. + +--guess:: +--no-guess:: + If `<branch>` is not found but there does exist a tracking + branch in exactly one remote (call it `<remote>`) with a + matching name, treat as equivalent to ++ +------------ +$ git checkout -b <branch> --track <remote>/<branch> +------------ ++ +If the branch exists in multiple remotes and one of them is named by +the `checkout.defaultRemote` configuration variable, we'll use that +one for the purposes of disambiguation, even if the `<branch>` isn't +unique across all remotes. Set it to +e.g. `checkout.defaultRemote=origin` to always checkout remote +branches from there if `<branch>` is ambiguous but exists on the +'origin' remote. See also `checkout.defaultRemote` in +linkgit:git-config[1]. ++ +Use `--no-guess` to disable this. -l:: Create the new branch's reflog; see linkgit:git-branch[1] for @@ -189,21 +202,21 @@ explicitly give a name with `-b` in such a case. --detach:: Rather than checking out a branch to work on it, check out a commit for inspection and discardable experiments. - This is the default behavior of "git checkout <commit>" when - <commit> is not a branch name. See the "DETACHED HEAD" section + This is the default behavior of `git checkout <commit>` when + `<commit>` is not a branch name. See the "DETACHED HEAD" section below for details. --orphan <new_branch>:: - Create a new 'orphan' branch, named <new_branch>, started from - <start_point> and switch to it. The first commit made on this + Create a new 'orphan' branch, named `<new_branch>`, started from + `<start_point>` and switch to it. The first commit made on this new branch will have no parents and it will be the root of a new history totally disconnected from all the other branches and commits. + The index and the working tree are adjusted as if you had previously run -"git checkout <start_point>". This allows you to start a new history -that records a set of paths similar to <start_point> by easily running -"git commit -a" to make the root commit. +`git checkout <start_point>`. This allows you to start a new history +that records a set of paths similar to `<start_point>` by easily running +`git commit -a` to make the root commit. + This can be useful when you want to publish the tree from a commit without exposing its full history. You might want to do this to publish @@ -212,17 +225,17 @@ whose full history contains proprietary or otherwise encumbered bits of code. + If you want to start a disconnected history that records a set of paths -that is totally different from the one of <start_point>, then you should +that is totally different from the one of `<start_point>`, then you should clear the index and the working tree right after creating the orphan -branch by running "git rm -rf ." from the top level of the working tree. +branch by running `git rm -rf .` from the top level of the working tree. Afterwards you will be ready to prepare your new files, repopulating the working tree, by copying them from elsewhere, extracting a tarball, etc. --ignore-skip-worktree-bits:: In sparse checkout mode, `git checkout -- <paths>` would - update only entries matched by <paths> and sparse patterns - in $GIT_DIR/info/sparse-checkout. This option ignores - the sparse patterns and adds back any files in <paths>. + update only entries matched by `<paths>` and sparse patterns + in `$GIT_DIR/info/sparse-checkout`. This option ignores + the sparse patterns and adds back any files in `<paths>`. -m:: --merge:: @@ -246,25 +259,25 @@ the conflicted merge in the specified paths. When switching branches with `--merge`, staged changes may be lost. --conflict=<style>:: - The same as --merge option above, but changes the way the + The same as `--merge` option above, but changes the way the conflicting hunks are presented, overriding the - merge.conflictStyle configuration variable. Possible values are + `merge.conflictStyle` configuration variable. Possible values are "merge" (default) and "diff3" (in addition to what is shown by "merge" style, shows the original contents). -p:: --patch:: Interactively select hunks in the difference between the - <tree-ish> (or the index, if unspecified) and the working + `<tree-ish>` (or the index, if unspecified) and the working tree. The chosen hunks are then applied in reverse to the - working tree (and if a <tree-ish> was specified, the index). + working tree (and if a `<tree-ish>` was specified, the index). + This means that you can use `git checkout -p` to selectively discard edits from your current working tree. See the ``Interactive Mode'' section of linkgit:git-add[1] to learn how to operate the `--patch` mode. + Note that this option uses the no overlay mode by default (see also -`--[no-]overlay`), and currently doesn't support overlay mode. +`--overlay`), and currently doesn't support overlay mode. --ignore-other-worktrees:: `git checkout` refuses when the wanted ref is already checked @@ -272,38 +285,42 @@ Note that this option uses the no overlay mode by default (see also out anyway. In other words, the ref can be held by more than one worktree. ---[no-]recurse-submodules:: - Using --recurse-submodules will update the content of all initialized +--overwrite-ignore:: +--no-overwrite-ignore:: + Silently overwrite ignored files when switching branches. This + is the default behavior. Use `--no-overwrite-ignore` to abort + the operation when the new branch contains ignored files. + +--recurse-submodules:: +--no-recurse-submodules:: + Using `--recurse-submodules` will update the content of all initialized submodules according to the commit recorded in the superproject. If local modifications in a submodule would be overwritten the checkout - will fail unless `-f` is used. If nothing (or --no-recurse-submodules) + will fail unless `-f` is used. If nothing (or `--no-recurse-submodules`) is used, the work trees of submodules will not be updated. - Just like linkgit:git-submodule[1], this will detach the - submodules HEAD. - ---no-guess:: - Do not attempt to create a branch if a remote tracking branch - of the same name exists. + Just like linkgit:git-submodule[1], this will detach `HEAD` of the + submodule. ---[no-]overlay:: +--overlay:: +--no-overlay:: In the default overlay mode, `git checkout` never removes files from the index or the working tree. When specifying `--no-overlay`, files that appear in the index and - working tree, but not in <tree-ish> are removed, to make them - match <tree-ish> exactly. + working tree, but not in `<tree-ish>` are removed, to make them + match `<tree-ish>` exactly. <branch>:: Branch to checkout; if it refers to a branch (i.e., a name that, when prepended with "refs/heads/", is a valid ref), then that branch is checked out. Otherwise, if it refers to a valid - commit, your HEAD becomes "detached" and you are no longer on + commit, your `HEAD` becomes "detached" and you are no longer on any branch (see below for details). + -You can use the `"@{-N}"` syntax to refer to the N-th last +You can use the `@{-N}` syntax to refer to the N-th last branch/commit checked out using "git checkout" operation. You may -also specify `-` which is synonymous to `"@{-1}"`. +also specify `-` which is synonymous to `@{-1}`. + -As a special case, you may use `"A...B"` as a shortcut for the +As a special case, you may use `A...B` as a shortcut for the merge base of `A` and `B` if there is exactly one merge base. You can leave out at most one of `A` and `B`, in which case it defaults to `HEAD`. @@ -312,7 +329,7 @@ leave out at most one of `A` and `B`, in which case it defaults to `HEAD`. <start_point>:: The name of a commit at which to start the new branch; see - linkgit:git-branch[1] for details. Defaults to HEAD. + linkgit:git-branch[1] for details. Defaults to `HEAD`. + As a special case, you may use `"A...B"` as a shortcut for the merge base of `A` and `B` if there is exactly one merge base. You can @@ -326,9 +343,9 @@ leave out at most one of `A` and `B`, in which case it defaults to `HEAD`. DETACHED HEAD ------------- -HEAD normally refers to a named branch (e.g. 'master'). Meanwhile, each +`HEAD` normally refers to a named branch (e.g. `master`). Meanwhile, each branch refers to a specific commit. Let's look at a repo with three -commits, one of them tagged, and with branch 'master' checked out: +commits, one of them tagged, and with branch `master` checked out: ------------ HEAD (refers to branch 'master') @@ -341,10 +358,10 @@ a---b---c branch 'master' (refers to commit 'c') ------------ When a commit is created in this state, the branch is updated to refer to -the new commit. Specifically, 'git commit' creates a new commit 'd', whose -parent is commit 'c', and then updates branch 'master' to refer to new -commit 'd'. HEAD still refers to branch 'master' and so indirectly now refers -to commit 'd': +the new commit. Specifically, 'git commit' creates a new commit `d`, whose +parent is commit `c`, and then updates branch `master` to refer to new +commit `d`. `HEAD` still refers to branch `master` and so indirectly now refers +to commit `d`: ------------ $ edit; git add; git commit @@ -361,7 +378,7 @@ a---b---c---d branch 'master' (refers to commit 'd') It is sometimes useful to be able to checkout a commit that is not at the tip of any named branch, or even to create a new commit that is not referenced by a named branch. Let's look at what happens when we -checkout commit 'b' (here we show two ways this may be done): +checkout commit `b` (here we show two ways this may be done): ------------ $ git checkout v2.0 # or @@ -376,9 +393,9 @@ a---b---c---d branch 'master' (refers to commit 'd') tag 'v2.0' (refers to commit 'b') ------------ -Notice that regardless of which checkout command we use, HEAD now refers -directly to commit 'b'. This is known as being in detached HEAD state. -It means simply that HEAD refers to a specific commit, as opposed to +Notice that regardless of which checkout command we use, `HEAD` now refers +directly to commit `b`. This is known as being in detached `HEAD` state. +It means simply that `HEAD` refers to a specific commit, as opposed to referring to a named branch. Let's see what happens when we create a commit: ------------ @@ -395,7 +412,7 @@ a---b---c---d branch 'master' (refers to commit 'd') tag 'v2.0' (refers to commit 'b') ------------ -There is now a new commit 'e', but it is referenced only by HEAD. We can +There is now a new commit `e`, but it is referenced only by `HEAD`. We can of course add yet another commit in this state: ------------ @@ -413,7 +430,7 @@ a---b---c---d branch 'master' (refers to commit 'd') ------------ In fact, we can perform all the normal Git operations. But, let's look -at what happens when we then checkout master: +at what happens when we then checkout `master`: ------------ $ git checkout master @@ -428,9 +445,9 @@ a---b---c---d branch 'master' (refers to commit 'd') ------------ It is important to realize that at this point nothing refers to commit -'f'. Eventually commit 'f' (and by extension commit 'e') will be deleted +`f`. Eventually commit `f` (and by extension commit `e`) will be deleted by the routine Git garbage collection process, unless we create a reference -before that happens. If we have not yet moved away from commit 'f', +before that happens. If we have not yet moved away from commit `f`, any of these will create a reference to it: ------------ @@ -439,19 +456,19 @@ $ git branch foo <2> $ git tag foo <3> ------------ -<1> creates a new branch 'foo', which refers to commit 'f', and then - updates HEAD to refer to branch 'foo'. In other words, we'll no longer - be in detached HEAD state after this command. +<1> creates a new branch `foo`, which refers to commit `f`, and then + updates `HEAD` to refer to branch `foo`. In other words, we'll no longer + be in detached `HEAD` state after this command. -<2> similarly creates a new branch 'foo', which refers to commit 'f', - but leaves HEAD detached. +<2> similarly creates a new branch `foo`, which refers to commit `f`, + but leaves `HEAD` detached. -<3> creates a new tag 'foo', which refers to commit 'f', - leaving HEAD detached. +<3> creates a new tag `foo`, which refers to commit `f`, + leaving `HEAD` detached. -If we have moved away from commit 'f', then we must first recover its object +If we have moved away from commit `f`, then we must first recover its object name (typically by using git reflog), and then we can create a reference to -it. For example, to see the last two commits to which HEAD referred, we +it. For example, to see the last two commits to which `HEAD` referred, we can use either of these commands: ------------ @@ -462,12 +479,12 @@ $ git log -g -2 HEAD ARGUMENT DISAMBIGUATION ----------------------- -When there is only one argument given and it is not `--` (e.g. "git -checkout abc"), and when the argument is both a valid `<tree-ish>` -(e.g. a branch "abc" exists) and a valid `<pathspec>` (e.g. a file +When there is only one argument given and it is not `--` (e.g. `git +checkout abc`), and when the argument is both a valid `<tree-ish>` +(e.g. a branch `abc` exists) and a valid `<pathspec>` (e.g. a file or a directory whose name is "abc" exists), Git would usually ask you to disambiguate. Because checking out a branch is so common an -operation, however, "git checkout abc" takes "abc" as a `<tree-ish>` +operation, however, `git checkout abc` takes "abc" as a `<tree-ish>` in such a situation. Use `git checkout -- <pathspec>` if you want to checkout these paths out of the index. @@ -475,7 +492,7 @@ EXAMPLES -------- . The following sequence checks out the `master` branch, reverts - the `Makefile` to two revisions back, deletes hello.c by + the `Makefile` to two revisions back, deletes `hello.c` by mistake, and gets it back from the index. + ------------ @@ -487,7 +504,7 @@ $ git checkout hello.c <3> + <1> switch branch <2> take a file out of another commit -<3> restore hello.c from the index +<3> restore `hello.c` from the index + If you want to check out _all_ C source files out of the index, you can say @@ -516,7 +533,7 @@ $ git checkout -- hello.c $ git checkout mytopic ------------ + -However, your "wrong" branch and correct "mytopic" branch may +However, your "wrong" branch and correct `mytopic` branch may differ in files that you have modified locally, in which case the above checkout would fail like this: + @@ -557,6 +574,11 @@ $ edit frotz $ git add frotz ------------ +SEE ALSO +-------- +linkgit:git-switch[1], +linkgit:git-restore[1] + GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-clean.txt b/Documentation/git-clean.txt index db876f7dde..0028ff12d1 100644 --- a/Documentation/git-clean.txt +++ b/Documentation/git-clean.txt @@ -63,7 +63,7 @@ OPTIONS still use the ignore rules given with `-e` options from the command line. This allows removing all untracked files, including build products. This can be used (possibly in - conjunction with 'git reset') to create a pristine + conjunction with 'git restore' or 'git reset') to create a pristine working directory to test a clean build. -X:: diff --git a/Documentation/git-commit.txt b/Documentation/git-commit.txt index a85c2c2a4c..7628193284 100644 --- a/Documentation/git-commit.txt +++ b/Documentation/git-commit.txt @@ -359,7 +359,7 @@ When recording your own work, the contents of modified files in your working tree are temporarily stored to a staging area called the "index" with 'git add'. A file can be reverted back, only in the index but not in the working tree, -to that of the last commit with `git reset HEAD -- <file>`, +to that of the last commit with `git restore --staged <file>`, which effectively reverts 'git add' and prevents the changes to this file from participating in the next commit. After building the state to be committed incrementally with these commands, diff --git a/Documentation/git-format-patch.txt b/Documentation/git-format-patch.txt index 9ce5b8aaee..b9b97e63ae 100644 --- a/Documentation/git-format-patch.txt +++ b/Documentation/git-format-patch.txt @@ -426,8 +426,8 @@ One way to test if your MUA is set up correctly is: * Apply it: $ git fetch <project> master:test-apply - $ git checkout test-apply - $ git reset --hard + $ git switch test-apply + $ git restore --source=HEAD --staged --worktree :/ $ git am a.patch If it does not apply correctly, there can be various reasons. diff --git a/Documentation/git-merge-base.txt b/Documentation/git-merge-base.txt index 9f07f4f6ed..261d5c1164 100644 --- a/Documentation/git-merge-base.txt +++ b/Documentation/git-merge-base.txt @@ -149,7 +149,7 @@ instead. Discussion on fork-point mode ----------------------------- -After working on the `topic` branch created with `git checkout -b +After working on the `topic` branch created with `git switch -c topic origin/master`, the history of remote-tracking branch `origin/master` may have been rewound and rebuilt, leading to a history of this shape: diff --git a/Documentation/git-merge.txt b/Documentation/git-merge.txt index 3ff0393507..01fd52dc70 100644 --- a/Documentation/git-merge.txt +++ b/Documentation/git-merge.txt @@ -87,6 +87,11 @@ will be appended to the specified message. Allow the rerere mechanism to update the index with the result of auto-conflict resolution if possible. +--overwrite-ignore:: +--no-overwrite-ignore:: + Silently overwrite ignored files from the merge result. This + is the default behavior. Use `--no-overwrite-ignore` to abort. + --abort:: Abort the current conflict resolution process, and try to reconstruct the pre-merge state. diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt index 057c21d8ee..6156609cf7 100644 --- a/Documentation/git-rebase.txt +++ b/Documentation/git-rebase.txt @@ -17,7 +17,7 @@ SYNOPSIS DESCRIPTION ----------- If <branch> is specified, 'git rebase' will perform an automatic -`git checkout <branch>` before doing anything else. Otherwise +`git switch <branch>` before doing anything else. Otherwise it remains on the current branch. If <upstream> is not specified, the upstream configured in diff --git a/Documentation/git-remote.txt b/Documentation/git-remote.txt index 0cad37fb81..9659abbf8e 100644 --- a/Documentation/git-remote.txt +++ b/Documentation/git-remote.txt @@ -230,7 +230,7 @@ $ git branch -r staging/master staging/staging-linus staging/staging-next -$ git checkout -b staging staging/master +$ git switch -c staging staging/master ... ------------ diff --git a/Documentation/git-rerere.txt b/Documentation/git-rerere.txt index 95763d7581..4cfc883378 100644 --- a/Documentation/git-rerere.txt +++ b/Documentation/git-rerere.txt @@ -91,7 +91,7 @@ For such a test, you need to merge master and topic somehow. One way to do it is to pull master into the topic branch: ------------ - $ git checkout topic + $ git switch topic $ git merge master o---*---o---+ topic @@ -113,10 +113,10 @@ the upstream might have been advanced since the test merge `+`, in which case the final commit graph would look like this: ------------ - $ git checkout topic + $ git switch topic $ git merge master $ ... work on both topic and master branches - $ git checkout master + $ git switch master $ git merge topic o---*---o---+---o---o topic @@ -136,11 +136,11 @@ merges, you could blow away the test merge, and keep building on top of the tip before the test merge: ------------ - $ git checkout topic + $ git switch topic $ git merge master $ git reset --hard HEAD^ ;# rewind the test merge $ ... work on both topic and master branches - $ git checkout master + $ git switch master $ git merge topic o---*---o-------o---o topic diff --git a/Documentation/git-reset.txt b/Documentation/git-reset.txt index 26e746c53f..97e0544d9e 100644 --- a/Documentation/git-reset.txt +++ b/Documentation/git-reset.txt @@ -25,12 +25,13 @@ The `<tree-ish>`/`<commit>` defaults to `HEAD` in all forms. the current branch.) + This means that `git reset <paths>` is the opposite of `git add -<paths>`. +<paths>`. This command is equivalent to +`git restore [--source=<tree-ish>] --staged <paths>...`. + After running `git reset <paths>` to update the index entry, you can -use linkgit:git-checkout[1] to check the contents out of the index to -the working tree. -Alternatively, using linkgit:git-checkout[1] and specifying a commit, you +use linkgit:git-restore[1] to check the contents out of the index to +the working tree. Alternatively, using linkgit:git-restore[1] +and specifying a commit with `--source`, you can copy the contents of a path out of a commit to the index and to the working tree in one go. @@ -86,8 +87,8 @@ but carries forward unmerged index entries. changes, reset is aborted. -- -If you want to undo a commit other than the latest on a branch, -linkgit:git-revert[1] is your friend. +See "Reset, restore and revert" in linkgit:git[1] for the differences +between the three commands. OPTIONS @@ -149,9 +150,9 @@ See also the `--amend` option to linkgit:git-commit[1]. Undo a commit, making it a topic branch:: + ------------ -$ git branch topic/wip <1> -$ git reset --hard HEAD~3 <2> -$ git checkout topic/wip <3> +$ git branch topic/wip <1> +$ git reset --hard HEAD~3 <2> +$ git switch topic/wip <3> ------------ + <1> You have made some commits, but realize they were premature @@ -232,13 +233,13 @@ working tree are not in any shape to be committed yet, but you need to get to the other branch for a quick bugfix. + ------------ -$ git checkout feature ;# you were working in "feature" branch and -$ work work work ;# got interrupted +$ git switch feature ;# you were working in "feature" branch and +$ work work work ;# got interrupted $ git commit -a -m "snapshot WIP" <1> -$ git checkout master +$ git switch master $ fix fix fix $ git commit ;# commit with real log -$ git checkout feature +$ git switch feature $ git reset --soft HEAD^ ;# go back to WIP state <2> $ git reset <3> ------------ @@ -279,18 +280,18 @@ reset it while keeping the changes in your working tree. + ------------ $ git tag start -$ git checkout -b branch1 +$ git switch -c branch1 $ edit $ git commit ... <1> $ edit -$ git checkout -b branch2 <2> +$ git switch -c branch2 <2> $ git reset --keep start <3> ------------ + <1> This commits your first edits in `branch1`. <2> In the ideal world, you could have realized that the earlier commit did not belong to the new topic when you created and switched - to `branch2` (i.e. `git checkout -b branch2 start`), but nobody is + to `branch2` (i.e. `git switch -c branch2 start`), but nobody is perfect. <3> But you can use `reset --keep` to remove the unwanted commit after you switched to `branch2`. diff --git a/Documentation/git-restore.txt b/Documentation/git-restore.txt new file mode 100644 index 0000000000..d90093f195 --- /dev/null +++ b/Documentation/git-restore.txt @@ -0,0 +1,185 @@ +git-restore(1) +============== + +NAME +---- +git-restore - Restore working tree files + +SYNOPSIS +-------- +[verse] +'git restore' [<options>] [--source=<tree>] [--staged] [--worktree] <pathspec>... +'git restore' (-p|--patch) [<options>] [--source=<tree>] [--staged] [--worktree] [<pathspec>...] + +DESCRIPTION +----------- +Restore specified paths in the working tree with some contents from a +restore source. If a path is tracked but does not exist in the restore +source, it will be removed to match the source. + +The command can also be used to restore the content in the index with +`--staged`, or restore both the working tree and the index with +`--staged --worktree`. + +By default, the restore sources for working tree and the index are the +index and `HEAD` respectively. `--source` could be used to specify a +commit as the restore source. + +See "Reset, restore and revert" in linkgit:git[1] for the differences +between the three commands. + +THIS COMMAND IS EXPERIMENTAL. THE BEHAVIOR MAY CHANGE. + +OPTIONS +------- +-s <tree>:: +--source=<tree>:: + Restore the working tree files with the content from the given + tree. It is common to specify the source tree by naming a + commit, branch or tag associated with it. ++ +If not specified, the default restore source for the working tree is +the index, and the default restore source for the index index is +`HEAD`. When both `--staged` and `--worktree` are specified, +`--source` must also be specified. + +-p:: +--patch:: + Interactively select hunks in the difference between the + restore source and the restore location. See the ``Interactive + Mode'' section of linkgit:git-add[1] to learn how to operate + the `--patch` mode. ++ +Note that `--patch` can accept no pathspec and will prompt to restore +all modified paths. + +-W:: +--worktree:: +-S:: +--staged:: + Specify the restore location. If neither option is specified, + by default the working tree is restored. Specifying `--staged` + will only restore the index. Specifying both restores both. + +-q:: +--quiet:: + Quiet, suppress feedback messages. Implies `--no-progress`. + +--progress:: +--no-progress:: + Progress status is reported on the standard error stream + by default when it is attached to a terminal, unless `--quiet` + is specified. This flag enables progress reporting even if not + attached to a terminal, regardless of `--quiet`. + +--ours:: +--theirs:: + When restoring files in the working tree from the index, use + stage #2 ('ours') or #3 ('theirs') for unmerged paths. ++ +Note that during `git rebase` and `git pull --rebase`, 'ours' and +'theirs' may appear swapped. See the explanation of the same options +in linkgit:git-checkout[1] for details. + +-m:: +--merge:: + When restoring files on the working tree from the index, + recreate the conflicted merge in the unmerged paths. + +--conflict=<style>:: + The same as `--merge` option above, but changes the way the + conflicting hunks are presented, overriding the + `merge.conflictStyle` configuration variable. Possible values + are "merge" (default) and "diff3" (in addition to what is + shown by "merge" style, shows the original contents). + +--ignore-unmerged:: + When restoring files on the working tree from the index, do + not abort the operation if there are unmerged entries and + neither `--ours`, `--theirs`, `--merge` or `--conflict` is + specified. Unmerged paths on the working tree are left alone. + +--ignore-skip-worktree-bits:: + In sparse checkout mode, by default is to only update entries + matched by `<pathspec>` and sparse patterns in + $GIT_DIR/info/sparse-checkout. This option ignores the sparse + patterns and unconditionally restores any files in + `<pathspec>`. + +--overlay:: +--no-overlay:: + In overlay mode, the command never removes files when + restoring. In no-overlay mode, tracked files that do not + appear in the `--source` tree are removed, to make them match + `<tree>` exactly. The default is no-overlay mode. + +EXAMPLES +-------- + +The following sequence switches to the `master` branch, reverts the +`Makefile` to two revisions back, deletes hello.c by mistake, and gets +it back from the index. + +------------ +$ git switch master +$ git restore --source master~2 Makefile <1> +$ rm -f hello.c +$ git restore hello.c <2> +------------ + +<1> take a file out of another commit +<2> restore hello.c from the index + +If you want to restore _all_ C source files to match the version in +the index, you can say + +------------ +$ git restore '*.c' +------------ + +Note the quotes around `*.c`. The file `hello.c` will also be +restored, even though it is no longer in the working tree, because the +file globbing is used to match entries in the index (not in the +working tree by the shell). + +To restore all files in the current directory + +------------ +$ git restore . +------------ + +or to restore all working tree files with 'top' pathspec magic (see +linkgit:gitglossary[7]) + +------------ +$ git restore :/ +------------ + +To restore a file in the index to match the version in `HEAD` (this is +the same as using linkgit:git-reset[1]) + +------------ +$ git restore --staged hello.c +------------ + +or you can restore both the index and the working tree (this the same +as using linkgit:git-checkout[1]) + +------------ +$ git restore --source=HEAD --staged --worktree hello.c +------------ + +or the short form which is more practical but less readable: + +------------ +$ git restore -s@ -SW hello.c +------------ + +SEE ALSO +-------- +linkgit:git-checkout[1], +linkgit:git-reset[1] + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/git-revert.txt b/Documentation/git-revert.txt index 0c82ca5bc0..fae4d66547 100644 --- a/Documentation/git-revert.txt +++ b/Documentation/git-revert.txt @@ -26,10 +26,13 @@ effect of some earlier commits (often only a faulty one). If you want to throw away all uncommitted changes in your working directory, you should see linkgit:git-reset[1], particularly the `--hard` option. If you want to extract specific files as they were in another commit, you -should see linkgit:git-checkout[1], specifically the `git checkout -<commit> -- <filename>` syntax. Take care with these alternatives as +should see linkgit:git-restore[1], specifically the `--source` +option. Take care with these alternatives as both will discard uncommitted changes in your working directory. +See "Reset, restore and revert" in linkgit:git[1] for the differences +between the three commands. + OPTIONS ------- <commit>...:: diff --git a/Documentation/git-stash.txt b/Documentation/git-stash.txt index e31ea7d303..8fbe12c66c 100644 --- a/Documentation/git-stash.txt +++ b/Documentation/git-stash.txt @@ -235,12 +235,12 @@ return to your original branch to make the emergency fix, like this: + ---------------------------------------------------------------- # ... hack hack hack ... -$ git checkout -b my_wip +$ git switch -c my_wip $ git commit -a -m "WIP" -$ git checkout master +$ git switch master $ edit emergency fix $ git commit -a -m "Fix in a hurry" -$ git checkout my_wip +$ git switch my_wip $ git reset --soft HEAD^ # ... continue hacking ... ---------------------------------------------------------------- @@ -293,7 +293,8 @@ SEE ALSO linkgit:git-checkout[1], linkgit:git-commit[1], linkgit:git-reflog[1], -linkgit:git-reset[1] +linkgit:git-reset[1], +linkgit:git-switch[1] GIT --- diff --git a/Documentation/git-switch.txt b/Documentation/git-switch.txt new file mode 100644 index 0000000000..197900363b --- /dev/null +++ b/Documentation/git-switch.txt @@ -0,0 +1,273 @@ +git-switch(1) +============= + +NAME +---- +git-switch - Switch branches + +SYNOPSIS +-------- +[verse] +'git switch' [<options>] [--no-guess] <branch> +'git switch' [<options>] --detach [<start-point>] +'git switch' [<options>] (-c|-C) <new-branch> [<start-point>] +'git switch' [<options>] --orphan <new-branch> + +DESCRIPTION +----------- +Switch to a specified branch. The working tree and the index are +updated to match the branch. All new commits will be added to the tip +of this branch. + +Optionally a new branch could be created with either `-c`, `-C`, +automatically from a remote branch of same name (see `--guess`), or +detach the working tree from any branch with `--detach`, along with +switching. + +Switching branches does not require a clean index and working tree +(i.e. no differences compared to `HEAD`). The operation is aborted +however if the operation leads to loss of local changes, unless told +otherwise with `--discard-changes` or `--merge`. + +THIS COMMAND IS EXPERIMENTAL. THE BEHAVIOR MAY CHANGE. + +OPTIONS +------- +<branch>:: + Branch to switch to. + +<new-branch>:: + Name for the new branch. + +<start-point>:: + The starting point for the new branch. Specifying a + `<start-point>` allows you to create a branch based on some + other point in history than where HEAD currently points. (Or, + in the case of `--detach`, allows you to inspect and detach + from some other point.) ++ +You can use the `@{-N}` syntax to refer to the N-th last +branch/commit switched to using "git switch" or "git checkout" +operation. You may also specify `-` which is synonymous to `@{-1}`. +This is often used to switch quickly between two branches, or to undo +a branch switch by mistake. ++ +As a special case, you may use `A...B` as a shortcut for the merge +base of `A` and `B` if there is exactly one merge base. You can leave +out at most one of `A` and `B`, in which case it defaults to `HEAD`. + +-c <new-branch>:: +--create <new-branch>:: + Create a new branch named `<new-branch>` starting at + `<start-point>` before switching to the branch. This is a + convenient shortcut for: ++ +------------ +$ git branch <new-branch> +$ git switch <new-branch> +------------ + +-C <new-branch>:: +--force-create <new-branch>:: + Similar to `--create` except that if `<new-branch>` already + exists, it will be reset to `<start-point>`. This is a + convenient shortcut for: ++ +------------ +$ git branch -f <new-branch> +$ git switch <new-branch> +------------ + +-d:: +--detach:: + Switch to a commit for inspection and discardable + experiments. See the "DETACHED HEAD" section in + linkgit:git-checkout[1] for details. + +--guess:: +--no-guess:: + If `<branch>` is not found but there does exist a tracking + branch in exactly one remote (call it `<remote>`) with a + matching name, treat as equivalent to ++ +------------ +$ git switch -c <branch> --track <remote>/<branch> +------------ ++ +If the branch exists in multiple remotes and one of them is named by +the `checkout.defaultRemote` configuration variable, we'll use that +one for the purposes of disambiguation, even if the `<branch>` isn't +unique across all remotes. Set it to e.g. `checkout.defaultRemote=origin` +to always checkout remote branches from there if `<branch>` is +ambiguous but exists on the 'origin' remote. See also +`checkout.defaultRemote` in linkgit:git-config[1]. ++ +`--guess` is the default behavior. Use `--no-guess` to disable it. + +-f:: +--force:: + An alias for `--discard-changes`. + +--discard-changes:: + Proceed even if the index or the working tree differs from + `HEAD`. Both the index and working tree are restored to match + the switching target. If `--recurse-submodules` is specified, + submodule content is also restored to match the switching + target. This is used to throw away local changes. + +-m:: +--merge:: + If you have local modifications to one or more files that are + different between the current branch and the branch to which + you are switching, the command refuses to switch branches in + order to preserve your modifications in context. However, + with this option, a three-way merge between the current + branch, your working tree contents, and the new branch is + done, and you will be on the new branch. ++ +When a merge conflict happens, the index entries for conflicting +paths are left unmerged, and you need to resolve the conflicts +and mark the resolved paths with `git add` (or `git rm` if the merge +should result in deletion of the path). + +--conflict=<style>:: + The same as `--merge` option above, but changes the way the + conflicting hunks are presented, overriding the + `merge.conflictStyle` configuration variable. Possible values are + "merge" (default) and "diff3" (in addition to what is shown by + "merge" style, shows the original contents). + +-q:: +--quiet:: + Quiet, suppress feedback messages. + +--progress:: +--no-progress:: + Progress status is reported on the standard error stream + by default when it is attached to a terminal, unless `--quiet` + is specified. This flag enables progress reporting even if not + attached to a terminal, regardless of `--quiet`. + +-t:: +--track:: + When creating a new branch, set up "upstream" configuration. + `-c` is implied. See `--track` in linkgit:git-branch[1] for + details. ++ +If no `-c` option is given, the name of the new branch will be derived +from the remote-tracking branch, by looking at the local part of the +refspec configured for the corresponding remote, and then stripping +the initial part up to the "*". This would tell us to use `hack` as +the local branch when branching off of `origin/hack` (or +`remotes/origin/hack`, or even `refs/remotes/origin/hack`). If the +given name has no slash, or the above guessing results in an empty +name, the guessing is aborted. You can explicitly give a name with +`-c` in such a case. + +--no-track:: + Do not set up "upstream" configuration, even if the + `branch.autoSetupMerge` configuration variable is true. + +--orphan <new-branch>:: + Create a new 'orphan' branch, named `<new-branch>`. All + tracked files are removed. + +--ignore-other-worktrees:: + `git switch` refuses when the wanted ref is already + checked out by another worktree. This option makes it check + the ref out anyway. In other words, the ref can be held by + more than one worktree. + +--recurse-submodules:: +--no-recurse-submodules:: + Using `--recurse-submodules` will update the content of all + initialized submodules according to the commit recorded in the + superproject. If nothing (or `--no-recurse-submodules`) is + used, the work trees of submodules will not be updated. Just + like linkgit:git-submodule[1], this will detach `HEAD` of the + submodules. + +EXAMPLES +-------- + +The following command switches to the "master" branch: + +------------ +$ git switch master +------------ + +After working in the wrong branch, switching to the correct branch +would be done using: + +------------ +$ git switch mytopic +------------ + +However, your "wrong" branch and correct "mytopic" branch may differ +in files that you have modified locally, in which case the above +switch would fail like this: + +------------ +$ git switch mytopic +error: You have local changes to 'frotz'; not switching branches. +------------ + +You can give the `-m` flag to the command, which would try a three-way +merge: + +------------ +$ git switch -m mytopic +Auto-merging frotz +------------ + +After this three-way merge, the local modifications are _not_ +registered in your index file, so `git diff` would show you what +changes you made since the tip of the new branch. + +To switch back to the previous branch before we switched to mytopic +(i.e. "master" branch): + +------------ +$ git switch - +------------ + +You can grow a new branch from any commit. For example, switch to +"HEAD~3" and create branch "fixup": + +------------ +$ git switch -c fixup HEAD~3 +Switched to a new branch 'fixup' +------------ + +If you want to start a new branch from a remote branch of the same +name: + +------------ +$ git switch new-topic +Branch 'new-topic' set up to track remote branch 'new-topic' from 'origin' +Switched to a new branch 'new-topic' +------------ + +To check out commit `HEAD~3` for temporary inspection or experiment +without creating a new branch: + +------------ +$ git switch --detach HEAD~3 +HEAD is now at 9fc9555312 Merge branch 'cc/shared-index-permbits' +------------ + +If it turns out whatever you have done is worth keeping, you can +always create a new name for it (without switching away): + +------------ +$ git switch -c good-surprises +------------ + +SEE ALSO +-------- +linkgit:git-checkout[1], +linkgit:git-branch[1] + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/git.txt b/Documentation/git.txt index f9b09db89b..e095514ace 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -211,6 +211,26 @@ people via patch over e-mail. include::cmds-foreignscminterface.txt[] +Reset, restore and revert +~~~~~~~~~~~~~~~~~~~~~~~~~ +There are three commands with similar names: `git reset`, +`git restore` and `git revert`. + +* linkgit:git-revert[1] is about making a new commit that reverts the + changes made by other commits. + +* linkgit:git-restore[1] is about restoring files in the working tree + from either the index or another commit. This command does not + update your branch. The command can also be used to restore files in + the index from another commit. + +* linkgit:git-reset[1] is about updating your branch, moving the tip + in order to add or remove commits from the branch. This operation + changes the commit history. ++ +`git reset` can also be used to restore the index, overlapping with +`git restore`. + Low-level commands (plumbing) ----------------------------- diff --git a/Documentation/gitattributes.txt b/Documentation/gitattributes.txt index 2796dfc83b..fb1d188d44 100644 --- a/Documentation/gitattributes.txt +++ b/Documentation/gitattributes.txt @@ -112,7 +112,8 @@ Checking-out and checking-in These attributes affect how the contents stored in the repository are copied to the working tree files when commands -such as 'git checkout' and 'git merge' run. They also affect how +such as 'git switch', 'git checkout' and 'git merge' run. +They also affect how Git stores the contents you prepare in the working tree in the repository upon 'git add' and 'git commit'. diff --git a/Documentation/gitcli.txt b/Documentation/gitcli.txt index 592e06d839..1ed3ca33b7 100644 --- a/Documentation/gitcli.txt +++ b/Documentation/gitcli.txt @@ -47,8 +47,8 @@ disambiguating `--` at appropriate places. things: + -------------------------------- -$ git checkout -- *.c -$ git checkout -- \*.c +$ git restore *.c +$ git restore \*.c -------------------------------- + The former lets your shell expand the fileglob, and you are asking @@ -209,6 +209,18 @@ See also http://marc.info/?l=git&m=116563135620359 and http://marc.info/?l=git&m=119150393620273 for further information. +Some other commands that also work on files in the working tree and/or +in the index can take `--staged` and/or `--worktree`. + +* `--staged` is exactly like `--cached`, which is used to ask a + command to only work on the index, not the working tree. + +* `--worktree` is the opposite, to ask a command to work on the + working tree only, not the index. + +* The two options can be specified together to ask a command to work + on both the index and the working tree. + GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/gitcore-tutorial.txt b/Documentation/gitcore-tutorial.txt index e29a9effcc..f880d21dfb 100644 --- a/Documentation/gitcore-tutorial.txt +++ b/Documentation/gitcore-tutorial.txt @@ -741,7 +741,7 @@ used earlier, and create a branch in it. You do that by simply just saying that you want to check out a new branch: ------------ -$ git checkout -b mybranch +$ git switch -c mybranch ------------ will create a new branch based at the current `HEAD` position, and switch @@ -755,7 +755,7 @@ just telling 'git checkout' what the base of the checkout would be. In other words, if you have an earlier tag or branch, you'd just do ------------ -$ git checkout -b mybranch earlier-commit +$ git switch -c mybranch earlier-commit ------------ and it would create the new branch `mybranch` at the earlier commit, @@ -765,7 +765,7 @@ and check out the state at that time. You can always just jump back to your original `master` branch by doing ------------ -$ git checkout master +$ git switch master ------------ (or any other branch-name, for that matter) and if you forget which @@ -794,7 +794,7 @@ $ git branch <branchname> [startingpoint] which will simply _create_ the branch, but will not do anything further. You can then later -- once you decide that you want to actually develop -on that branch -- switch to that branch with a regular 'git checkout' +on that branch -- switch to that branch with a regular 'git switch' with the branchname as the argument. @@ -808,7 +808,7 @@ being the same as the original `master` branch, let's make sure we're in that branch, and do some work there. ------------------------------------------------ -$ git checkout mybranch +$ git switch mybranch $ echo "Work, work, work" >>hello $ git commit -m "Some work." -i hello ------------------------------------------------ @@ -825,7 +825,7 @@ does some work in the original branch, and simulate that by going back to the master branch, and editing the same file differently there: ------------ -$ git checkout master +$ git switch master ------------ Here, take a moment to look at the contents of `hello`, and notice how they @@ -958,7 +958,7 @@ to the `master` branch. Let's go back to `mybranch`, and run 'git merge' to get the "upstream changes" back to your branch. ------------ -$ git checkout mybranch +$ git switch mybranch $ git merge -m "Merge upstream changes." master ------------ @@ -1133,9 +1133,8 @@ Remember, before running 'git merge', our `master` head was at work." commit. ------------ -$ git checkout mybranch -$ git reset --hard master^2 -$ git checkout master +$ git switch -C mybranch master^2 +$ git switch master $ git reset --hard master^ ------------ diff --git a/Documentation/giteveryday.txt b/Documentation/giteveryday.txt index 9f2528fc8c..1bd919f92b 100644 --- a/Documentation/giteveryday.txt +++ b/Documentation/giteveryday.txt @@ -41,7 +41,7 @@ following commands. * linkgit:git-log[1] to see what happened. - * linkgit:git-checkout[1] and linkgit:git-branch[1] to switch + * linkgit:git-switch[1] and linkgit:git-branch[1] to switch branches. * linkgit:git-add[1] to manage the index file. @@ -51,8 +51,7 @@ following commands. * linkgit:git-commit[1] to advance the current branch. - * linkgit:git-reset[1] and linkgit:git-checkout[1] (with - pathname parameters) to undo changes. + * linkgit:git-restore[1] to undo changes. * linkgit:git-merge[1] to merge between local branches. @@ -80,9 +79,9 @@ $ git tag v2.43 <2> Create a topic branch and develop.:: + ------------ -$ git checkout -b alsa-audio <1> +$ git switch -c alsa-audio <1> $ edit/compile/test -$ git checkout -- curses/ux_audio_oss.c <2> +$ git restore curses/ux_audio_oss.c <2> $ git add curses/ux_audio_alsa.c <3> $ edit/compile/test $ git diff HEAD <4> @@ -90,7 +89,7 @@ $ git commit -a -s <5> $ edit/compile/test $ git diff HEAD^ <6> $ git commit -a --amend <7> -$ git checkout master <8> +$ git switch master <8> $ git merge alsa-audio <9> $ git log --since='3 days ago' <10> $ git log v2.43.. curses/ <11> @@ -148,11 +147,11 @@ Clone the upstream and work on it. Feed changes to upstream.:: ------------ $ git clone git://git.kernel.org/pub/scm/.../torvalds/linux-2.6 my2.6 $ cd my2.6 -$ git checkout -b mine master <1> +$ git switch -c mine master <1> $ edit/compile/test; git commit -a -s <2> $ git format-patch master <3> $ git send-email --to="person <email@example.com>" 00*.patch <4> -$ git checkout master <5> +$ git switch master <5> $ git pull <6> $ git log -p ORIG_HEAD.. arch/i386 include/asm-i386 <7> $ git ls-remote --heads http://git.kernel.org/.../jgarzik/libata-dev.git <8> @@ -194,7 +193,7 @@ satellite$ edit/compile/test/commit satellite$ git push origin <4> mothership$ cd frotz -mothership$ git checkout master +mothership$ git switch master mothership$ git merge satellite/master <5> ------------ + @@ -216,7 +215,7 @@ machine into the master branch. Branch off of a specific tag.:: + ------------ -$ git checkout -b private2.6.14 v2.6.14 <1> +$ git switch -c private2.6.14 v2.6.14 <1> $ edit/compile/test; git commit -a $ git checkout master $ git cherry-pick v2.6.14..private2.6.14 <2> @@ -274,14 +273,14 @@ $ mailx <3> & s 2 3 4 5 ./+to-apply & s 7 8 ./+hold-linus & q -$ git checkout -b topic/one master +$ git switch -c topic/one master $ git am -3 -i -s ./+to-apply <4> $ compile/test -$ git checkout -b hold/linus && git am -3 -i -s ./+hold-linus <5> -$ git checkout topic/one && git rebase master <6> -$ git checkout pu && git reset --hard next <7> +$ git switch -c hold/linus && git am -3 -i -s ./+hold-linus <5> +$ git switch topic/one && git rebase master <6> +$ git switch -C pu next <7> $ git merge topic/one topic/two && git merge hold/linus <8> -$ git checkout maint +$ git switch maint $ git cherry-pick master~4 <9> $ compile/test $ git tag -s -m "GIT 0.99.9x" v0.99.9x <10> diff --git a/Documentation/githooks.txt b/Documentation/githooks.txt index 786e778ab8..82cd573776 100644 --- a/Documentation/githooks.txt +++ b/Documentation/githooks.txt @@ -165,12 +165,13 @@ rebased, and is not set when rebasing the current branch. post-checkout ~~~~~~~~~~~~~ -This hook is invoked when a linkgit:git-checkout[1] is run after having updated the +This hook is invoked when a linkgit:git-checkout[1] or +linkgit:git-switch[1] is run after having updated the worktree. The hook is given three parameters: the ref of the previous HEAD, the ref of the new HEAD (which may or may not have changed), and a flag indicating whether the checkout was a branch checkout (changing branches, flag=1) or a file checkout (retrieving a file from the index, flag=0). -This hook cannot affect the outcome of `git checkout`. +This hook cannot affect the outcome of `git switch` or `git checkout`. It is also run after linkgit:git-clone[1], unless the `--no-checkout` (`-n`) option is used. The first parameter given to the hook is the null-ref, the second the @@ -406,7 +407,8 @@ exit with a zero status. For example, the hook can simply run `git read-tree -u -m HEAD "$1"` in order to emulate `git fetch` that is run in the reverse direction with `git push`, as the two-tree form of `git read-tree -u -m` is -essentially the same as `git checkout` that switches branches while +essentially the same as `git switch` or `git checkout` +that switches branches while keeping the local changes in the working tree that do not interfere with the difference between the branches. diff --git a/Documentation/gittutorial-2.txt b/Documentation/gittutorial-2.txt index e0976f6017..8bdb7d0bd3 100644 --- a/Documentation/gittutorial-2.txt +++ b/Documentation/gittutorial-2.txt @@ -370,13 +370,13 @@ situation: $ git status On branch master Changes to be committed: - (use "git reset HEAD <file>..." to unstage) + (use "git restore --staged <file>..." to unstage) new file: closing.txt Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) + (use "git restore <file>..." to discard changes in working directory) modified: file.txt diff --git a/Documentation/gittutorial.txt b/Documentation/gittutorial.txt index 242de31cb6..59ef5cef1f 100644 --- a/Documentation/gittutorial.txt +++ b/Documentation/gittutorial.txt @@ -110,7 +110,7 @@ $ git status On branch master Changes to be committed: Your branch is up to date with 'origin/master'. - (use "git reset HEAD <file>..." to unstage) + (use "git restore --staged <file>..." to unstage) modified: file1 modified: file2 @@ -207,7 +207,7 @@ automatically. The asterisk marks the branch you are currently on; type ------------------------------------------------ -$ git checkout experimental +$ git switch experimental ------------------------------------------------ to switch to the experimental branch. Now edit a file, commit the @@ -216,7 +216,7 @@ change, and switch back to the master branch: ------------------------------------------------ (edit file) $ git commit -a -$ git checkout master +$ git switch master ------------------------------------------------ Check that the change you made is no longer visible, since it was diff --git a/Documentation/gitworkflows.txt b/Documentation/gitworkflows.txt index ca11c7bdaf..abc0dc6bc7 100644 --- a/Documentation/gitworkflows.txt +++ b/Documentation/gitworkflows.txt @@ -301,8 +301,7 @@ topics on 'next': .Rewind and rebuild next [caption="Recipe: "] ===================================== -* `git checkout next` -* `git reset --hard master` +* `git switch -C next master` * `git merge ai/topic_in_next1` * `git merge ai/topic_in_next2` * ... diff --git a/Documentation/revisions.txt b/Documentation/revisions.txt index 82c1e5754e..97f995e5a9 100644 --- a/Documentation/revisions.txt +++ b/Documentation/revisions.txt @@ -115,7 +115,7 @@ Here's an example to make it more clear: ------------------------------ $ git config push.default current $ git config remote.pushdefault myfork -$ git checkout -b mybranch origin/master +$ git switch -c mybranch origin/master $ git rev-parse --symbolic-full-name @{upstream} refs/remotes/origin/master diff --git a/Documentation/user-manual.txt b/Documentation/user-manual.txt index eff7890274..8bce75b2cf 100644 --- a/Documentation/user-manual.txt +++ b/Documentation/user-manual.txt @@ -122,10 +122,10 @@ Tags are expected to always point at the same version of a project, while heads are expected to advance as development progresses. Create a new branch head pointing to one of these versions and check it -out using linkgit:git-checkout[1]: +out using linkgit:git-switch[1]: ------------------------------------------------ -$ git checkout -b new v2.6.13 +$ git switch -c new v2.6.13 ------------------------------------------------ The working directory then reflects the contents that the project had @@ -282,10 +282,10 @@ a summary of the commands: this command will fail with a warning. `git branch -D <branch>`:: delete the branch `<branch>` irrespective of its merged status. -`git checkout <branch>`:: +`git switch <branch>`:: make the current branch `<branch>`, updating the working directory to reflect the version referenced by `<branch>`. -`git checkout -b <new> <start-point>`:: +`git switch -c <new> <start-point>`:: create a new branch `<new>` referencing `<start-point>`, and check it out. @@ -302,22 +302,22 @@ ref: refs/heads/master Examining an old version without creating a new branch ------------------------------------------------------ -The `git checkout` command normally expects a branch head, but will also -accept an arbitrary commit; for example, you can check out the commit -referenced by a tag: +The `git switch` command normally expects a branch head, but will also +accept an arbitrary commit when invoked with --detach; for example, +you can check out the commit referenced by a tag: ------------------------------------------------ -$ git checkout v2.6.17 +$ git switch --detach v2.6.17 Note: checking out 'v2.6.17'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this -state without impacting any branches by performing another checkout. +state without impacting any branches by performing another switch. If you want to create a new branch to retain commits you create, you may -do so (now or later) by using -b with the checkout command again. Example: +do so (now or later) by using -c with the switch command again. Example: - git checkout -b new_branch_name + git switch -c new_branch_name HEAD is now at 427abfa Linux v2.6.17 ------------------------------------------------ @@ -373,7 +373,7 @@ You might want to build on one of these remote-tracking branches on a branch of your own, just as you would for a tag: ------------------------------------------------ -$ git checkout -b my-todo-copy origin/todo +$ git switch -c my-todo-copy origin/todo ------------------------------------------------ You can also check out `origin/todo` directly to examine it or @@ -1408,7 +1408,7 @@ If you get stuck and decide to just give up and throw the whole mess away, you can always return to the pre-merge state with ------------------------------------------------- -$ git reset --hard HEAD +$ git merge --abort ------------------------------------------------- Or, if you've already committed the merge that you want to throw away, @@ -1446,7 +1446,7 @@ mistake, you can return the entire working tree to the last committed state with ------------------------------------------------- -$ git reset --hard HEAD +$ git restore --staged --worktree :/ ------------------------------------------------- If you make a commit that you later wish you hadn't, there are two @@ -1523,12 +1523,10 @@ Checking out an old version of a file In the process of undoing a previous bad change, you may find it useful to check out an older version of a particular file using -linkgit:git-checkout[1]. We've used `git checkout` before to switch -branches, but it has quite different behavior if it is given a path -name: the command +linkgit:git-restore[1]. The command ------------------------------------------------- -$ git checkout HEAD^ path/to/file +$ git restore --source=HEAD^ path/to/file ------------------------------------------------- replaces path/to/file by the contents it had in the commit HEAD^, and @@ -2211,8 +2209,8 @@ $ git branch --track release origin/master These can be easily kept up to date using linkgit:git-pull[1]. ------------------------------------------------- -$ git checkout test && git pull -$ git checkout release && git pull +$ git switch test && git pull +$ git switch release && git pull ------------------------------------------------- Important note! If you have any local changes in these branches, then @@ -2264,7 +2262,7 @@ tested changes 2) help future bug hunters that use `git bisect` to find problems ------------------------------------------------- -$ git checkout -b speed-up-spinlocks v2.6.35 +$ git switch -c speed-up-spinlocks v2.6.35 ------------------------------------------------- Now you apply the patch(es), run some tests, and commit the change(s). If @@ -2279,7 +2277,7 @@ When you are happy with the state of this change, you can merge it into the "test" branch in preparation to make it public: ------------------------------------------------- -$ git checkout test && git merge speed-up-spinlocks +$ git switch test && git merge speed-up-spinlocks ------------------------------------------------- It is unlikely that you would have any conflicts here ... but you might if you @@ -2291,7 +2289,7 @@ see the value of keeping each patch (or patch series) in its own branch. It means that the patches can be moved into the `release` tree in any order. ------------------------------------------------- -$ git checkout release && git merge speed-up-spinlocks +$ git switch release && git merge speed-up-spinlocks ------------------------------------------------- After a while, you will have a number of branches, and despite the @@ -2512,7 +2510,7 @@ Suppose that you create a branch `mywork` on a remote-tracking branch `origin`, and create some commits on top of it: ------------------------------------------------- -$ git checkout -b mywork origin +$ git switch -c mywork origin $ vi file.txt $ git commit $ vi otherfile.txt @@ -2552,7 +2550,7 @@ commits without any merges, you may instead choose to use linkgit:git-rebase[1]: ------------------------------------------------- -$ git checkout mywork +$ git switch mywork $ git rebase origin ------------------------------------------------- @@ -3668,13 +3666,13 @@ change within the submodule, and then update the superproject to reference the new commit: ------------------------------------------------- -$ git checkout master +$ git switch master ------------------------------------------------- or ------------------------------------------------- -$ git checkout -b fix-up +$ git switch -c fix-up ------------------------------------------------- then @@ -3800,8 +3798,8 @@ use linkgit:git-tag[1] for both. The Workflow ------------ -High-level operations such as linkgit:git-commit[1], -linkgit:git-checkout[1] and linkgit:git-reset[1] work by moving data +High-level operations such as linkgit:git-commit[1] and +linkgit:git-restore[1] work by moving data between the working tree, the index, and the object database. Git provides low-level operations which perform each of these steps individually. @@ -4194,7 +4192,7 @@ start. A good place to start is with the contents of the initial commit, with: ---------------------------------------------------- -$ git checkout e83c5163 +$ git switch --detach e83c5163 ---------------------------------------------------- The initial revision lays the foundation for almost everything Git has @@ -4437,10 +4435,10 @@ Managing branches ----------------- ----------------------------------------------- -$ git branch # list all local branches in this repo -$ git checkout test # switch working directory to branch "test" -$ git branch new # create branch "new" starting at current HEAD -$ git branch -d new # delete branch "new" +$ git branch # list all local branches in this repo +$ git switch test # switch working directory to branch "test" +$ git branch new # create branch "new" starting at current HEAD +$ git branch -d new # delete branch "new" ----------------------------------------------- Instead of basing a new branch on current HEAD (the default), use: @@ -4456,7 +4454,7 @@ $ git branch new test~10 # ten commits before tip of branch "test" Create and switch to a new branch at the same time: ----------------------------------------------- -$ git checkout -b new v2.6.15 +$ git switch -c new v2.6.15 ----------------------------------------------- Update and examine branches from the repository you cloned from: @@ -4467,7 +4465,7 @@ $ git branch -r # list origin/master origin/next ... -$ git checkout -b masterwork origin/master +$ git switch -c masterwork origin/master ----------------------------------------------- Fetch a branch from a different repository, and give it a new @@ -771,9 +771,11 @@ BUILT_INS += git-format-patch$X BUILT_INS += git-fsck-objects$X BUILT_INS += git-init$X BUILT_INS += git-merge-subtree$X +BUILT_INS += git-restore$X BUILT_INS += git-show$X BUILT_INS += git-stage$X BUILT_INS += git-status$X +BUILT_INS += git-switch$X BUILT_INS += git-whatchanged$X # what 'all' will build and 'install' will install in gitexecdir, @@ -193,13 +193,22 @@ void NORETURN die_conclude_merge(void) void detach_advice(const char *new_name) { const char *fmt = - _("Note: checking out '%s'.\n\n" + _("Note: switching to '%s'.\n" + "\n" "You are in 'detached HEAD' state. You can look around, make experimental\n" "changes and commit them, and you can discard any commits you make in this\n" - "state without impacting any branches by performing another checkout.\n\n" + "state without impacting any branches by switching back to a branch.\n" + "\n" "If you want to create a new branch to retain commits you create, you may\n" - "do so (now or later) by using -b with the checkout command again. Example:\n\n" - " git checkout -b <new-branch-name>\n\n"); + "do so (now or later) by using -c with the switch command. Example:\n" + "\n" + " git switch -c <new-branch-name>\n" + "\n" + "Or undo this operation with:\n" + "\n" + " git switch -\n" + "\n" + "Turn off this advice by setting config variable advice.detachedHead to false\n\n"); fprintf(stderr, fmt, new_name); } @@ -346,9 +346,9 @@ void remove_merge_branch_state(struct repository *r) unlink(git_path_merge_mode(r)); } -void remove_branch_state(struct repository *r) +void remove_branch_state(struct repository *r, int verbose) { - sequencer_post_commit_cleanup(r); + sequencer_post_commit_cleanup(r, verbose); unlink(git_path_squash_msg(r)); remove_merge_branch_state(r); } @@ -70,7 +70,7 @@ void remove_merge_branch_state(struct repository *r); * Remove information about the state of working on the current * branch. (E.g., MERGE_HEAD) */ -void remove_branch_state(struct repository *r); +void remove_branch_state(struct repository *r, int verbose); /* * Configure local branch "local" as downstream to branch "remote" @@ -214,6 +214,7 @@ int cmd_remote_fd(int argc, const char **argv, const char *prefix); int cmd_repack(int argc, const char **argv, const char *prefix); int cmd_rerere(int argc, const char **argv, const char *prefix); int cmd_reset(int argc, const char **argv, const char *prefix); +int cmd_restore(int argc, const char **argv, const char *prefix); int cmd_rev_list(int argc, const char **argv, const char *prefix); int cmd_rev_parse(int argc, const char **argv, const char *prefix); int cmd_revert(int argc, const char **argv, const char *prefix); @@ -227,6 +228,7 @@ int cmd_status(int argc, const char **argv, const char *prefix); int cmd_stash(int argc, const char **argv, const char *prefix); int cmd_stripspace(int argc, const char **argv, const char *prefix); int cmd_submodule__helper(int argc, const char **argv, const char *prefix); +int cmd_switch(int argc, const char **argv, const char *prefix); int cmd_symbolic_ref(int argc, const char **argv, const char *prefix); int cmd_tag(int argc, const char **argv, const char *prefix); int cmd_tar_tree(int argc, const char **argv, const char *prefix); diff --git a/builtin/am.c b/builtin/am.c index 252e37ddf0..1aea657a7f 100644 --- a/builtin/am.c +++ b/builtin/am.c @@ -1956,7 +1956,7 @@ static int clean_index(const struct object_id *head, const struct object_id *rem if (merge_tree(remote_tree)) return -1; - remove_branch_state(the_repository); + remove_branch_state(the_repository, 0); return 0; } diff --git a/builtin/checkout.c b/builtin/checkout.c index ffa776c6e1..91f8509f85 100644 --- a/builtin/checkout.c +++ b/builtin/checkout.c @@ -1,32 +1,31 @@ #define USE_THE_INDEX_COMPATIBILITY_MACROS #include "builtin.h" -#include "config.h" +#include "advice.h" +#include "blob.h" +#include "branch.h" +#include "cache-tree.h" #include "checkout.h" +#include "commit.h" +#include "config.h" +#include "diff.h" +#include "dir.h" +#include "ll-merge.h" #include "lockfile.h" +#include "merge-recursive.h" +#include "object-store.h" #include "parse-options.h" #include "refs.h" -#include "object-store.h" -#include "commit.h" +#include "remote.h" +#include "resolve-undo.h" +#include "revision.h" +#include "run-command.h" +#include "submodule.h" +#include "submodule-config.h" #include "tree.h" #include "tree-walk.h" -#include "cache-tree.h" #include "unpack-trees.h" -#include "dir.h" -#include "run-command.h" -#include "merge-recursive.h" -#include "branch.h" -#include "diff.h" -#include "revision.h" -#include "remote.h" -#include "blob.h" +#include "wt-status.h" #include "xdiff-interface.h" -#include "ll-merge.h" -#include "resolve-undo.h" -#include "submodule-config.h" -#include "submodule.h" -#include "advice.h" - -static int checkout_optimize_new_branch; static const char * const checkout_usage[] = { N_("git checkout [<options>] <branch>"), @@ -34,12 +33,23 @@ static const char * const checkout_usage[] = { NULL, }; +static const char * const switch_branch_usage[] = { + N_("git switch [<options>] [<branch>]"), + NULL, +}; + +static const char * const restore_usage[] = { + N_("git restore [<options>] [--source=<branch>] <file>..."), + NULL, +}; + struct checkout_opts { int patch_mode; int quiet; int merge; int force; int force_detach; + int implicit_detach; int writeout_stage; int overwrite_ignore; int ignore_skipworktree; @@ -47,10 +57,19 @@ struct checkout_opts { int show_progress; int count_checkout_paths; int overlay_mode; - /* - * If new checkout options are added, skip_merge_working_tree - * should be updated accordingly. - */ + int dwim_new_local_branch; + int discard_changes; + int accept_ref; + int accept_pathspec; + int switch_branch_doing_nothing_is_ok; + int only_merge_on_switching_branches; + int can_switch_when_in_progress; + int orphan_from_empty_tree; + int empty_pathspec_ok; + int checkout_index; + int checkout_worktree; + const char *ignore_unmerged_opt; + int ignore_unmerged; const char *new_branch; const char *new_branch_force; @@ -58,10 +77,12 @@ struct checkout_opts { int new_branch_log; enum branch_track track; struct diff_options diff_options; + char *conflict_style; int branch_exists; const char *prefix; struct pathspec pathspec; + const char *from_treeish; struct tree *source_tree; }; @@ -313,17 +334,74 @@ static void mark_ce_for_checkout_no_overlay(struct cache_entry *ce, } } +static int checkout_worktree(const struct checkout_opts *opts) +{ + struct checkout state = CHECKOUT_INIT; + int nr_checkouts = 0, nr_unmerged = 0; + int errs = 0; + int pos; + + state.force = 1; + state.refresh_cache = 1; + state.istate = &the_index; + + enable_delayed_checkout(&state); + for (pos = 0; pos < active_nr; pos++) { + struct cache_entry *ce = active_cache[pos]; + if (ce->ce_flags & CE_MATCHED) { + if (!ce_stage(ce)) { + errs |= checkout_entry(ce, &state, + NULL, &nr_checkouts); + continue; + } + if (opts->writeout_stage) + errs |= checkout_stage(opts->writeout_stage, + ce, pos, + &state, + &nr_checkouts, opts->overlay_mode); + else if (opts->merge) + errs |= checkout_merged(pos, &state, + &nr_unmerged); + pos = skip_same_name(ce, pos) - 1; + } + } + remove_marked_cache_entries(&the_index, 1); + remove_scheduled_dirs(); + errs |= finish_delayed_checkout(&state, &nr_checkouts); + + if (opts->count_checkout_paths) { + if (nr_unmerged) + fprintf_ln(stderr, Q_("Recreated %d merge conflict", + "Recreated %d merge conflicts", + nr_unmerged), + nr_unmerged); + if (opts->source_tree) + fprintf_ln(stderr, Q_("Updated %d path from %s", + "Updated %d paths from %s", + nr_checkouts), + nr_checkouts, + find_unique_abbrev(&opts->source_tree->object.oid, + DEFAULT_ABBREV)); + else if (!nr_unmerged || nr_checkouts) + fprintf_ln(stderr, Q_("Updated %d path from the index", + "Updated %d paths from the index", + nr_checkouts), + nr_checkouts); + } + + return errs; +} + static int checkout_paths(const struct checkout_opts *opts, const char *revision) { int pos; - struct checkout state = CHECKOUT_INIT; static char *ps_matched; struct object_id rev; struct commit *head; int errs = 0; struct lock_file lock_file = LOCK_INIT; - int nr_checkouts = 0, nr_unmerged = 0; + int checkout_index; trace2_cmd_mode(opts->patch_mode ? "patch" : "path"); @@ -333,8 +411,9 @@ static int checkout_paths(const struct checkout_opts *opts, if (opts->new_branch_log) die(_("'%s' cannot be used with updating paths"), "-l"); - if (opts->force && opts->patch_mode) - die(_("'%s' cannot be used with updating paths"), "-f"); + if (opts->ignore_unmerged && opts->patch_mode) + die(_("'%s' cannot be used with updating paths"), + opts->ignore_unmerged_opt); if (opts->force_detach) die(_("'%s' cannot be used with updating paths"), "--detach"); @@ -342,16 +421,46 @@ static int checkout_paths(const struct checkout_opts *opts, if (opts->merge && opts->patch_mode) die(_("'%s' cannot be used with %s"), "--merge", "--patch"); - if (opts->force && opts->merge) - die(_("'%s' cannot be used with %s"), "-f", "-m"); + if (opts->ignore_unmerged && opts->merge) + die(_("'%s' cannot be used with %s"), + opts->ignore_unmerged_opt, "-m"); if (opts->new_branch) die(_("Cannot update paths and switch to branch '%s' at the same time."), opts->new_branch); - if (opts->patch_mode) - return run_add_interactive(revision, "--patch=checkout", - &opts->pathspec); + if (!opts->checkout_worktree && !opts->checkout_index) + die(_("neither '%s' or '%s' is specified"), + "--staged", "--worktree"); + + if (!opts->checkout_worktree && !opts->from_treeish) + die(_("'%s' must be used when '%s' is not specified"), + "--worktree", "--source"); + + if (opts->checkout_index && !opts->checkout_worktree && + opts->writeout_stage) + die(_("'%s' or '%s' cannot be used with %s"), + "--ours", "--theirs", "--staged"); + + if (opts->checkout_index && !opts->checkout_worktree && + opts->merge) + die(_("'%s' or '%s' cannot be used with %s"), + "--merge", "--conflict", "--staged"); + + if (opts->patch_mode) { + const char *patch_mode; + + if (opts->checkout_index && opts->checkout_worktree) + patch_mode = "--patch=checkout"; + else if (opts->checkout_index && !opts->checkout_worktree) + patch_mode = "--patch=reset"; + else if (!opts->checkout_index && opts->checkout_worktree) + patch_mode = "--patch=worktree"; + else + BUG("either flag must have been set, worktree=%d, index=%d", + opts->checkout_worktree, opts->checkout_index); + return run_add_interactive(revision, patch_mode, &opts->pathspec); + } repo_hold_locked_index(the_repository, &lock_file, LOCK_DIE_ON_ERROR); if (read_cache_preload(&opts->pathspec) < 0) @@ -392,8 +501,9 @@ static int checkout_paths(const struct checkout_opts *opts, if (ce->ce_flags & CE_MATCHED) { if (!ce_stage(ce)) continue; - if (opts->force) { - warning(_("path '%s' is unmerged"), ce->name); + if (opts->ignore_unmerged) { + if (!opts->quiet) + warning(_("path '%s' is unmerged"), ce->name); } else if (opts->writeout_stage) { errs |= check_stage(opts->writeout_stage, ce, pos, opts->overlay_mode); } else if (opts->merge) { @@ -409,57 +519,31 @@ static int checkout_paths(const struct checkout_opts *opts, return 1; /* Now we are committed to check them out */ - state.force = 1; - state.refresh_cache = 1; - state.istate = &the_index; + if (opts->checkout_worktree) + errs |= checkout_worktree(opts); - enable_delayed_checkout(&state); - for (pos = 0; pos < active_nr; pos++) { - struct cache_entry *ce = active_cache[pos]; - if (ce->ce_flags & CE_MATCHED) { - if (!ce_stage(ce)) { - errs |= checkout_entry(ce, &state, - NULL, &nr_checkouts); - continue; - } - if (opts->writeout_stage) - errs |= checkout_stage(opts->writeout_stage, - ce, pos, - &state, - &nr_checkouts, opts->overlay_mode); - else if (opts->merge) - errs |= checkout_merged(pos, &state, - &nr_unmerged); - pos = skip_same_name(ce, pos) - 1; - } - } - remove_marked_cache_entries(&the_index, 1); - remove_scheduled_dirs(); - errs |= finish_delayed_checkout(&state, &nr_checkouts); + /* + * Allow updating the index when checking out from the index. + * This is to save new stat info. + */ + if (opts->checkout_worktree && !opts->checkout_index && !opts->source_tree) + checkout_index = 1; + else + checkout_index = opts->checkout_index; - if (opts->count_checkout_paths) { - if (nr_unmerged) - fprintf_ln(stderr, Q_("Recreated %d merge conflict", - "Recreated %d merge conflicts", - nr_unmerged), - nr_unmerged); - if (opts->source_tree) - fprintf_ln(stderr, Q_("Updated %d path from %s", - "Updated %d paths from %s", - nr_checkouts), - nr_checkouts, - find_unique_abbrev(&opts->source_tree->object.oid, - DEFAULT_ABBREV)); - else if (!nr_unmerged || nr_checkouts) - fprintf_ln(stderr, Q_("Updated %d path from the index", - "Updated %d paths from the index", - nr_checkouts), - nr_checkouts); + if (checkout_index) { + if (write_locked_index(&the_index, &lock_file, COMMIT_LOCK)) + die(_("unable to write new index file")); + } else { + /* + * NEEDSWORK: if --worktree is not specified, we + * should save stat info of checked out files in the + * index to avoid the next (potentially costly) + * refresh. But it's a bit tricker to do... + */ + rollback_lock_file(&lock_file); } - if (write_locked_index(&the_index, &lock_file, COMMIT_LOCK)) - die(_("unable to write new index file")); - read_ref_full("HEAD", 0, &rev, NULL); head = lookup_commit_reference_gently(the_repository, &rev, 1); @@ -553,112 +637,6 @@ static void setup_branch_path(struct branch_info *branch) branch->path = strbuf_detach(&buf, NULL); } -/* - * Skip merging the trees, updating the index and working directory if and - * only if we are creating a new branch via "git checkout -b <new_branch>." - */ -static int skip_merge_working_tree(const struct checkout_opts *opts, - const struct branch_info *old_branch_info, - const struct branch_info *new_branch_info) -{ - /* - * Do the merge if sparse checkout is on and the user has not opted in - * to the optimized behavior - */ - if (core_apply_sparse_checkout && !checkout_optimize_new_branch) - return 0; - - /* - * We must do the merge if we are actually moving to a new commit. - */ - if (!old_branch_info->commit || !new_branch_info->commit || - !oideq(&old_branch_info->commit->object.oid, - &new_branch_info->commit->object.oid)) - return 0; - - /* - * opts->patch_mode cannot be used with switching branches so is - * not tested here - */ - - /* - * opts->quiet only impacts output so doesn't require a merge - */ - - /* - * Honor the explicit request for a three-way merge or to throw away - * local changes - */ - if (opts->merge || opts->force) - return 0; - - /* - * --detach is documented as "updating the index and the files in the - * working tree" but this optimization skips those steps so fall through - * to the regular code path. - */ - if (opts->force_detach) - return 0; - - /* - * opts->writeout_stage cannot be used with switching branches so is - * not tested here - */ - - /* - * Honor the explicit ignore requests - */ - if (!opts->overwrite_ignore || opts->ignore_skipworktree || - opts->ignore_other_worktrees) - return 0; - - /* - * opts->show_progress only impacts output so doesn't require a merge - */ - - /* - * opts->overlay_mode cannot be used with switching branches so is - * not tested here - */ - - /* - * If we aren't creating a new branch any changes or updates will - * happen in the existing branch. Since that could only be updating - * the index and working directory, we don't want to skip those steps - * or we've defeated any purpose in running the command. - */ - if (!opts->new_branch) - return 0; - - /* - * new_branch_force is defined to "create/reset and checkout a branch" - * so needs to go through the merge to do the reset - */ - if (opts->new_branch_force) - return 0; - - /* - * A new orphaned branch requrires the index and the working tree to be - * adjusted to <start_point> - */ - if (opts->new_orphan_branch) - return 0; - - /* - * Remaining variables are not checkout options but used to track state - */ - - /* - * Do the merge if this is the initial checkout. We cannot use - * is_cache_unborn() here because the index hasn't been loaded yet - * so cache_nr and timestamp.sec are always zero. - */ - if (!file_exists(get_index_file())) - return 0; - - return 1; -} - static int merge_working_tree(const struct checkout_opts *opts, struct branch_info *old_branch_info, struct branch_info *new_branch_info, @@ -666,15 +644,21 @@ static int merge_working_tree(const struct checkout_opts *opts, { int ret; struct lock_file lock_file = LOCK_INIT; + struct tree *new_tree; hold_locked_index(&lock_file, LOCK_DIE_ON_ERROR); if (read_cache_preload(NULL) < 0) return error(_("index file corrupt")); resolve_undo_clear(); - if (opts->force) { - ret = reset_tree(get_commit_tree(new_branch_info->commit), - opts, 1, writeout_error); + if (opts->new_orphan_branch && opts->orphan_from_empty_tree) { + if (new_branch_info->commit) + BUG("'switch --orphan' should never accept a commit as starting point"); + new_tree = parse_tree_indirect(the_hash_algo->empty_tree); + } else + new_tree = get_commit_tree(new_branch_info->commit); + if (opts->discard_changes) { + ret = reset_tree(new_tree, opts, 1, writeout_error); if (ret) return ret; } else { @@ -712,7 +696,8 @@ static int merge_working_tree(const struct checkout_opts *opts, &old_branch_info->commit->object.oid : the_hash_algo->empty_tree); init_tree_desc(&trees[0], tree->buffer, tree->size); - tree = parse_tree_indirect(&new_branch_info->commit->object.oid); + parse_tree(new_tree); + tree = new_tree; init_tree_desc(&trees[1], tree->buffer, tree->size); ret = unpack_trees(2, trees, &topts); @@ -777,7 +762,7 @@ static int merge_working_tree(const struct checkout_opts *opts, o.verbosity = 0; work = write_tree_from_memory(&o); - ret = reset_tree(get_commit_tree(new_branch_info->commit), + ret = reset_tree(new_tree, opts, 1, writeout_error); if (ret) @@ -786,13 +771,13 @@ static int merge_working_tree(const struct checkout_opts *opts, o.branch1 = new_branch_info->name; o.branch2 = "local"; ret = merge_trees(&o, - get_commit_tree(new_branch_info->commit), + new_tree, work, old_tree, &result); if (ret < 0) exit(128); - ret = reset_tree(get_commit_tree(new_branch_info->commit), + ret = reset_tree(new_tree, opts, 0, writeout_error); strbuf_release(&o.obuf); @@ -810,7 +795,7 @@ static int merge_working_tree(const struct checkout_opts *opts, if (write_locked_index(&the_index, &lock_file, COMMIT_LOCK)) die(_("unable to write new index file")); - if (!opts->force && !opts->quiet) + if (!opts->discard_changes && !opts->quiet && new_branch_info->commit) show_local_changes(&new_branch_info->commit->object, &opts->diff_options); return 0; @@ -915,7 +900,7 @@ static void update_refs_for_switch(const struct checkout_opts *opts, delete_reflog(old_branch_info->path); } } - remove_branch_state(the_repository); + remove_branch_state(the_repository, !opts->quiet); strbuf_release(&msg); if (!opts->quiet && (new_branch_info->path || (!opts->force_detach && !strcmp(new_branch_info->name, "HEAD")))) @@ -1011,7 +996,10 @@ static void orphaned_commit_warning(struct commit *old_commit, struct commit *ne add_pending_object(&revs, object, oid_to_hex(&object->oid)); for_each_ref(add_pending_uninteresting_ref, &revs); - add_pending_oid(&revs, "HEAD", &new_commit->object.oid, UNINTERESTING); + if (new_commit) + add_pending_oid(&revs, "HEAD", + &new_commit->object.oid, + UNINTERESTING); if (prepare_revision_walk(&revs)) die(_("internal error in revision walk")); @@ -1032,6 +1020,7 @@ static int switch_branches(const struct checkout_opts *opts, void *path_to_free; struct object_id rev; int flag, writeout_error = 0; + int do_merge = 1; trace2_cmd_mode("branch"); @@ -1045,22 +1034,26 @@ static int switch_branches(const struct checkout_opts *opts, if (old_branch_info.path) skip_prefix(old_branch_info.path, "refs/heads/", &old_branch_info.name); + if (opts->new_orphan_branch && opts->orphan_from_empty_tree) { + if (new_branch_info->name) + BUG("'switch --orphan' should never accept a commit as starting point"); + new_branch_info->commit = NULL; + new_branch_info->name = "(empty)"; + do_merge = 1; + } + if (!new_branch_info->name) { new_branch_info->name = "HEAD"; new_branch_info->commit = old_branch_info.commit; if (!new_branch_info->commit) die(_("You are on a branch yet to be born")); parse_commit_or_die(new_branch_info->commit); + + if (opts->only_merge_on_switching_branches) + do_merge = 0; } - /* optimize the "checkout -b <new_branch> path */ - if (skip_merge_working_tree(opts, &old_branch_info, new_branch_info)) { - if (!checkout_optimize_new_branch && !opts->quiet) { - if (read_cache_preload(NULL) < 0) - return error(_("index file corrupt")); - show_local_changes(&new_branch_info->commit->object, &opts->diff_options); - } - } else { + if (do_merge) { ret = merge_working_tree(opts, &old_branch_info, new_branch_info, &writeout_error); if (ret) { free(path_to_free); @@ -1080,11 +1073,6 @@ static int switch_branches(const struct checkout_opts *opts, static int git_checkout_config(const char *var, const char *value, void *cb) { - if (!strcmp(var, "checkout.optimizenewbranch")) { - checkout_optimize_new_branch = git_config_bool(var, value); - return 0; - } - if (!strcmp(var, "diff.ignoresubmodules")) { struct checkout_opts *opts = cb; handle_ignore_submodules_arg(&opts->diff_options, value); @@ -1097,6 +1085,34 @@ static int git_checkout_config(const char *var, const char *value, void *cb) return git_xmerge_config(var, value, NULL); } +static void setup_new_branch_info_and_source_tree( + struct branch_info *new_branch_info, + struct checkout_opts *opts, + struct object_id *rev, + const char *arg) +{ + struct tree **source_tree = &opts->source_tree; + struct object_id branch_rev; + + new_branch_info->name = arg; + setup_branch_path(new_branch_info); + + if (!check_refname_format(new_branch_info->path, 0) && + !read_ref(new_branch_info->path, &branch_rev)) + oidcpy(rev, &branch_rev); + else + new_branch_info->path = NULL; /* not an existing branch */ + + new_branch_info->commit = lookup_commit_reference_gently(the_repository, rev, 1); + if (!new_branch_info->commit) { + /* not a commit */ + *source_tree = parse_tree_indirect(rev); + } else { + parse_commit_or_die(new_branch_info->commit); + *source_tree = get_commit_tree(new_branch_info->commit); + } +} + static int parse_branchname_arg(int argc, const char **argv, int dwim_new_local_branch_ok, struct branch_info *new_branch_info, @@ -1104,10 +1120,8 @@ static int parse_branchname_arg(int argc, const char **argv, struct object_id *rev, int *dwim_remotes_matched) { - struct tree **source_tree = &opts->source_tree; const char **new_branch = &opts->new_branch; int argcount = 0; - struct object_id branch_rev; const char *arg; int dash_dash_pos; int has_dash_dash = 0; @@ -1157,10 +1171,16 @@ static int parse_branchname_arg(int argc, const char **argv, if (!argc) return 0; + if (!opts->accept_pathspec) { + if (argc > 1) + die(_("only one reference expected")); + has_dash_dash = 1; /* helps disambiguate */ + } + arg = argv[0]; dash_dash_pos = -1; for (i = 0; i < argc; i++) { - if (!strcmp(argv[i], "--")) { + if (opts->accept_pathspec && !strcmp(argv[i], "--")) { dash_dash_pos = i; break; } @@ -1194,11 +1214,12 @@ static int parse_branchname_arg(int argc, const char **argv, recover_with_dwim = 0; /* - * Accept "git checkout foo" and "git checkout foo --" - * as candidates for dwim. + * Accept "git checkout foo", "git checkout foo --" + * and "git switch foo" as candidates for dwim. */ if (!(argc == 1 && !has_dash_dash) && - !(argc == 2 && has_dash_dash)) + !(argc == 2 && has_dash_dash) && + opts->accept_pathspec) recover_with_dwim = 0; if (recover_with_dwim) { @@ -1229,26 +1250,11 @@ static int parse_branchname_arg(int argc, const char **argv, argv++; argc--; - new_branch_info->name = arg; - setup_branch_path(new_branch_info); - - if (!check_refname_format(new_branch_info->path, 0) && - !read_ref(new_branch_info->path, &branch_rev)) - oidcpy(rev, &branch_rev); - else - new_branch_info->path = NULL; /* not an existing branch */ - - new_branch_info->commit = lookup_commit_reference_gently(the_repository, rev, 1); - if (!new_branch_info->commit) { - /* not a commit */ - *source_tree = parse_tree_indirect(rev); - } else { - parse_commit_or_die(new_branch_info->commit); - *source_tree = get_commit_tree(new_branch_info->commit); - } + setup_new_branch_info_and_source_tree(new_branch_info, opts, rev, arg); - if (!*source_tree) /* case (1): want a tree */ + if (!opts->source_tree) /* case (1): want a tree */ die(_("reference is not a tree: %s"), arg); + if (!has_dash_dash) { /* case (3).(d) -> (1) */ /* * Do not complain the most common case @@ -1258,7 +1264,7 @@ static int parse_branchname_arg(int argc, const char **argv, */ if (argc) verify_non_filename(opts->prefix, arg); - } else { + } else if (opts->accept_pathspec) { argcount++; argv++; argc--; @@ -1285,6 +1291,60 @@ static int switch_unborn_to_new_branch(const struct checkout_opts *opts) return status; } +static void die_expecting_a_branch(const struct branch_info *branch_info) +{ + struct object_id oid; + char *to_free; + + if (dwim_ref(branch_info->name, strlen(branch_info->name), &oid, &to_free) == 1) { + const char *ref = to_free; + + if (skip_prefix(ref, "refs/tags/", &ref)) + die(_("a branch is expected, got tag '%s'"), ref); + if (skip_prefix(ref, "refs/remotes/", &ref)) + die(_("a branch is expected, got remote branch '%s'"), ref); + die(_("a branch is expected, got '%s'"), ref); + } + if (branch_info->commit) + die(_("a branch is expected, got commit '%s'"), branch_info->name); + /* + * This case should never happen because we already die() on + * non-commit, but just in case. + */ + die(_("a branch is expected, got '%s'"), branch_info->name); +} + +static void die_if_some_operation_in_progress(void) +{ + struct wt_status_state state; + + memset(&state, 0, sizeof(state)); + wt_status_get_state(the_repository, &state, 0); + + if (state.merge_in_progress) + die(_("cannot switch branch while merging\n" + "Consider \"git merge --quit\" " + "or \"git worktree add\".")); + if (state.am_in_progress) + die(_("cannot switch branch in the middle of an am session\n" + "Consider \"git am --quit\" " + "or \"git worktree add\".")); + if (state.rebase_interactive_in_progress || state.rebase_in_progress) + die(_("cannot switch branch while rebasing\n" + "Consider \"git rebase --quit\" " + "or \"git worktree add\".")); + if (state.cherry_pick_in_progress) + die(_("cannot switch branch while cherry-picking\n" + "Consider \"git cherry-pick --quit\" " + "or \"git worktree add\".")); + if (state.revert_in_progress) + die(_("cannot switch branch while reverting\n" + "Consider \"git revert --quit\" " + "or \"git worktree add\".")); + if (state.bisect_in_progress) + warning(_("you are switching branch while bisecting")); +} + static int checkout_branch(struct checkout_opts *opts, struct branch_info *new_branch_info) { @@ -1295,9 +1355,9 @@ static int checkout_branch(struct checkout_opts *opts, die(_("'%s' cannot be used with switching branches"), "--patch"); - if (!opts->overlay_mode) + if (opts->overlay_mode != -1) die(_("'%s' cannot be used with switching branches"), - "--no-overlay"); + "--[no]-overlay"); if (opts->writeout_stage) die(_("'%s' cannot be used with switching branches"), @@ -1306,6 +1366,9 @@ static int checkout_branch(struct checkout_opts *opts, if (opts->force && opts->merge) die(_("'%s' cannot be used with '%s'"), "-f", "-m"); + if (opts->discard_changes && opts->merge) + die(_("'%s' cannot be used with '%s'"), "--discard-changes", "--merge"); + if (opts->force_detach && opts->new_branch) die(_("'%s' cannot be used with '%s'"), "--detach", "-b/-B/--orphan"); @@ -1313,6 +1376,8 @@ static int checkout_branch(struct checkout_opts *opts, if (opts->new_orphan_branch) { if (opts->track != BRANCH_TRACK_UNSPECIFIED) die(_("'%s' cannot be used with '%s'"), "--orphan", "-t"); + if (opts->orphan_from_empty_tree && new_branch_info->name) + die(_("'%s' cannot take <start-point>"), "--orphan"); } else if (opts->force_detach) { if (opts->track != BRANCH_TRACK_UNSPECIFIED) die(_("'%s' cannot be used with '%s'"), "--detach", "-t"); @@ -1323,6 +1388,23 @@ static int checkout_branch(struct checkout_opts *opts, die(_("Cannot switch branch to a non-commit '%s'"), new_branch_info->name); + if (!opts->switch_branch_doing_nothing_is_ok && + !new_branch_info->name && + !opts->new_branch && + !opts->force_detach) + die(_("missing branch or commit argument")); + + if (!opts->implicit_detach && + !opts->force_detach && + !opts->new_branch && + !opts->new_branch_force && + new_branch_info->name && + !new_branch_info->path) + die_expecting_a_branch(new_branch_info); + + if (!opts->can_switch_when_in_progress) + die_if_some_operation_in_progress(); + if (new_branch_info->path && !opts->force_detach && !opts->new_branch && !opts->ignore_other_worktrees) { int flag; @@ -1344,99 +1426,148 @@ static int checkout_branch(struct checkout_opts *opts, return switch_branches(opts, new_branch_info); } -int cmd_checkout(int argc, const char **argv, const char *prefix) +static struct option *add_common_options(struct checkout_opts *opts, + struct option *prevopts) { - struct checkout_opts opts; - struct branch_info new_branch_info; - char *conflict_style = NULL; - int dwim_new_local_branch, no_dwim_new_local_branch = 0; - int dwim_remotes_matched = 0; struct option options[] = { - OPT__QUIET(&opts.quiet, N_("suppress progress reporting")), - OPT_STRING('b', NULL, &opts.new_branch, N_("branch"), - N_("create and checkout a new branch")), - OPT_STRING('B', NULL, &opts.new_branch_force, N_("branch"), - N_("create/reset and checkout a branch")), - OPT_BOOL('l', NULL, &opts.new_branch_log, N_("create reflog for new branch")), - OPT_BOOL(0, "detach", &opts.force_detach, N_("detach HEAD at named commit")), - OPT_SET_INT('t', "track", &opts.track, N_("set upstream info for new branch"), + OPT__QUIET(&opts->quiet, N_("suppress progress reporting")), + { OPTION_CALLBACK, 0, "recurse-submodules", NULL, + "checkout", "control recursive updating of submodules", + PARSE_OPT_OPTARG, option_parse_recurse_submodules_worktree_updater }, + OPT_BOOL(0, "progress", &opts->show_progress, N_("force progress reporting")), + OPT_BOOL('m', "merge", &opts->merge, N_("perform a 3-way merge with the new branch")), + OPT_STRING(0, "conflict", &opts->conflict_style, N_("style"), + N_("conflict style (merge or diff3)")), + OPT_END() + }; + struct option *newopts = parse_options_concat(prevopts, options); + free(prevopts); + return newopts; +} + +static struct option *add_common_switch_branch_options( + struct checkout_opts *opts, struct option *prevopts) +{ + struct option options[] = { + OPT_BOOL('d', "detach", &opts->force_detach, N_("detach HEAD at named commit")), + OPT_SET_INT('t', "track", &opts->track, N_("set upstream info for new branch"), BRANCH_TRACK_EXPLICIT), - OPT_STRING(0, "orphan", &opts.new_orphan_branch, N_("new-branch"), N_("new unparented branch")), - OPT_SET_INT_F('2', "ours", &opts.writeout_stage, + OPT__FORCE(&opts->force, N_("force checkout (throw away local modifications)"), + PARSE_OPT_NOCOMPLETE), + OPT_STRING(0, "orphan", &opts->new_orphan_branch, N_("new-branch"), N_("new unparented branch")), + OPT_BOOL_F(0, "overwrite-ignore", &opts->overwrite_ignore, + N_("update ignored files (default)"), + PARSE_OPT_NOCOMPLETE), + OPT_BOOL(0, "ignore-other-worktrees", &opts->ignore_other_worktrees, + N_("do not check if another worktree is holding the given ref")), + OPT_END() + }; + struct option *newopts = parse_options_concat(prevopts, options); + free(prevopts); + return newopts; +} + +static struct option *add_checkout_path_options(struct checkout_opts *opts, + struct option *prevopts) +{ + struct option options[] = { + OPT_SET_INT_F('2', "ours", &opts->writeout_stage, N_("checkout our version for unmerged files"), 2, PARSE_OPT_NONEG), - OPT_SET_INT_F('3', "theirs", &opts.writeout_stage, + OPT_SET_INT_F('3', "theirs", &opts->writeout_stage, N_("checkout their version for unmerged files"), 3, PARSE_OPT_NONEG), - OPT__FORCE(&opts.force, N_("force checkout (throw away local modifications)"), - PARSE_OPT_NOCOMPLETE), - OPT_BOOL('m', "merge", &opts.merge, N_("perform a 3-way merge with the new branch")), - OPT_BOOL_F(0, "overwrite-ignore", &opts.overwrite_ignore, - N_("update ignored files (default)"), - PARSE_OPT_NOCOMPLETE), - OPT_STRING(0, "conflict", &conflict_style, N_("style"), - N_("conflict style (merge or diff3)")), - OPT_BOOL('p', "patch", &opts.patch_mode, N_("select hunks interactively")), - OPT_BOOL(0, "ignore-skip-worktree-bits", &opts.ignore_skipworktree, + OPT_BOOL('p', "patch", &opts->patch_mode, N_("select hunks interactively")), + OPT_BOOL(0, "ignore-skip-worktree-bits", &opts->ignore_skipworktree, N_("do not limit pathspecs to sparse entries only")), - OPT_BOOL(0, "no-guess", &no_dwim_new_local_branch, - N_("do not second guess 'git checkout <no-such-branch>'")), - OPT_BOOL(0, "ignore-other-worktrees", &opts.ignore_other_worktrees, - N_("do not check if another worktree is holding the given ref")), - { OPTION_CALLBACK, 0, "recurse-submodules", NULL, - "checkout", "control recursive updating of submodules", - PARSE_OPT_OPTARG, option_parse_recurse_submodules_worktree_updater }, - OPT_BOOL(0, "progress", &opts.show_progress, N_("force progress reporting")), - OPT_BOOL(0, "overlay", &opts.overlay_mode, N_("use overlay mode (default)")), - OPT_END(), + OPT_END() }; + struct option *newopts = parse_options_concat(prevopts, options); + free(prevopts); + return newopts; +} + +static int checkout_main(int argc, const char **argv, const char *prefix, + struct checkout_opts *opts, struct option *options, + const char * const usagestr[]) +{ + struct branch_info new_branch_info; + int dwim_remotes_matched = 0; + int parseopt_flags = 0; - memset(&opts, 0, sizeof(opts)); memset(&new_branch_info, 0, sizeof(new_branch_info)); - opts.overwrite_ignore = 1; - opts.prefix = prefix; - opts.show_progress = -1; - opts.overlay_mode = -1; + opts->overwrite_ignore = 1; + opts->prefix = prefix; + opts->show_progress = -1; + + git_config(git_checkout_config, opts); - git_config(git_checkout_config, &opts); + opts->track = BRANCH_TRACK_UNSPECIFIED; - opts.track = BRANCH_TRACK_UNSPECIFIED; + if (!opts->accept_pathspec && !opts->accept_ref) + BUG("make up your mind, you need to take _something_"); + if (opts->accept_pathspec && opts->accept_ref) + parseopt_flags = PARSE_OPT_KEEP_DASHDASH; - argc = parse_options(argc, argv, prefix, options, checkout_usage, - PARSE_OPT_KEEP_DASHDASH); + argc = parse_options(argc, argv, prefix, options, + usagestr, parseopt_flags); - dwim_new_local_branch = !no_dwim_new_local_branch; - if (opts.show_progress < 0) { - if (opts.quiet) - opts.show_progress = 0; + if (opts->show_progress < 0) { + if (opts->quiet) + opts->show_progress = 0; else - opts.show_progress = isatty(2); + opts->show_progress = isatty(2); } - if (conflict_style) { - opts.merge = 1; /* implied */ - git_xmerge_config("merge.conflictstyle", conflict_style, NULL); + if (opts->conflict_style) { + opts->merge = 1; /* implied */ + git_xmerge_config("merge.conflictstyle", opts->conflict_style, NULL); + } + if (opts->force) { + opts->discard_changes = 1; + opts->ignore_unmerged_opt = "--force"; + opts->ignore_unmerged = 1; } - if ((!!opts.new_branch + !!opts.new_branch_force + !!opts.new_orphan_branch) > 1) + if ((!!opts->new_branch + !!opts->new_branch_force + !!opts->new_orphan_branch) > 1) die(_("-b, -B and --orphan are mutually exclusive")); - if (opts.overlay_mode == 1 && opts.patch_mode) + if (opts->overlay_mode == 1 && opts->patch_mode) die(_("-p and --overlay are mutually exclusive")); + if (opts->checkout_index >= 0 || opts->checkout_worktree >= 0) { + if (opts->checkout_index < 0) + opts->checkout_index = 0; + if (opts->checkout_worktree < 0) + opts->checkout_worktree = 0; + } else { + if (opts->checkout_index < 0) + opts->checkout_index = -opts->checkout_index - 1; + if (opts->checkout_worktree < 0) + opts->checkout_worktree = -opts->checkout_worktree - 1; + } + if (opts->checkout_index < 0 || opts->checkout_worktree < 0) + BUG("these flags should be non-negative by now"); + /* + * convenient shortcut: "git restore --staged" equals + * "git restore --staged --source HEAD" + */ + if (!opts->from_treeish && opts->checkout_index && !opts->checkout_worktree) + opts->from_treeish = "HEAD"; + /* * From here on, new_branch will contain the branch to be checked out, * and new_branch_force and new_orphan_branch will tell us which one of * -b/-B/--orphan is being used. */ - if (opts.new_branch_force) - opts.new_branch = opts.new_branch_force; + if (opts->new_branch_force) + opts->new_branch = opts->new_branch_force; - if (opts.new_orphan_branch) - opts.new_branch = opts.new_orphan_branch; + if (opts->new_orphan_branch) + opts->new_branch = opts->new_orphan_branch; /* --track without -b/-B/--orphan should DWIM */ - if (opts.track != BRANCH_TRACK_UNSPECIFIED && !opts.new_branch) { + if (opts->track != BRANCH_TRACK_UNSPECIFIED && !opts->new_branch) { const char *argv0 = argv[0]; if (!argc || !strcmp(argv0, "--")) die(_("--track needs a branch name")); @@ -1445,7 +1576,7 @@ int cmd_checkout(int argc, const char **argv, const char *prefix) argv0 = strchr(argv0, '/'); if (!argv0 || !argv0[1]) die(_("missing branch name; try -b")); - opts.new_branch = argv0 + 1; + opts->new_branch = argv0 + 1; } /* @@ -1461,59 +1592,75 @@ int cmd_checkout(int argc, const char **argv, const char *prefix) * including "last branch" syntax and DWIM-ery for names of * remote branches, erroring out for invalid or ambiguous cases. */ - if (argc) { + if (argc && opts->accept_ref) { struct object_id rev; int dwim_ok = - !opts.patch_mode && - dwim_new_local_branch && - opts.track == BRANCH_TRACK_UNSPECIFIED && - !opts.new_branch; + !opts->patch_mode && + opts->dwim_new_local_branch && + opts->track == BRANCH_TRACK_UNSPECIFIED && + !opts->new_branch; int n = parse_branchname_arg(argc, argv, dwim_ok, - &new_branch_info, &opts, &rev, + &new_branch_info, opts, &rev, &dwim_remotes_matched); argv += n; argc -= n; + } else if (!opts->accept_ref && opts->from_treeish) { + struct object_id rev; + + if (get_oid_mb(opts->from_treeish, &rev)) + die(_("could not resolve %s"), opts->from_treeish); + + setup_new_branch_info_and_source_tree(&new_branch_info, + opts, &rev, + opts->from_treeish); + + if (!opts->source_tree) + die(_("reference is not a tree: %s"), opts->from_treeish); } + if (opts->accept_pathspec && !opts->empty_pathspec_ok && !argc && + !opts->patch_mode) /* patch mode is special */ + die(_("you must specify path(s) to restore")); + if (argc) { - parse_pathspec(&opts.pathspec, 0, - opts.patch_mode ? PATHSPEC_PREFIX_ORIGIN : 0, + parse_pathspec(&opts->pathspec, 0, + opts->patch_mode ? PATHSPEC_PREFIX_ORIGIN : 0, prefix, argv); - if (!opts.pathspec.nr) + if (!opts->pathspec.nr) die(_("invalid path specification")); /* * Try to give more helpful suggestion. * new_branch && argc > 1 will be caught later. */ - if (opts.new_branch && argc == 1) + if (opts->new_branch && argc == 1) die(_("'%s' is not a commit and a branch '%s' cannot be created from it"), - argv[0], opts.new_branch); + argv[0], opts->new_branch); - if (opts.force_detach) + if (opts->force_detach) die(_("git checkout: --detach does not take a path argument '%s'"), argv[0]); - if (1 < !!opts.writeout_stage + !!opts.force + !!opts.merge) + if (1 < !!opts->writeout_stage + !!opts->force + !!opts->merge) die(_("git checkout: --ours/--theirs, --force and --merge are incompatible when\n" "checking out of the index.")); } - if (opts.new_branch) { + if (opts->new_branch) { struct strbuf buf = STRBUF_INIT; - if (opts.new_branch_force) - opts.branch_exists = validate_branchname(opts.new_branch, &buf); + if (opts->new_branch_force) + opts->branch_exists = validate_branchname(opts->new_branch, &buf); else - opts.branch_exists = - validate_new_branchname(opts.new_branch, &buf, 0); + opts->branch_exists = + validate_new_branchname(opts->new_branch, &buf, 0); strbuf_release(&buf); } UNLEAK(opts); - if (opts.patch_mode || opts.pathspec.nr) { - int ret = checkout_paths(&opts, new_branch_info.name); + if (opts->patch_mode || opts->pathspec.nr) { + int ret = checkout_paths(opts, new_branch_info.name); if (ret && dwim_remotes_matched > 1 && advice_checkout_ambiguous_remote_branch_name) advise(_("'%s' matched more than one remote tracking branch.\n" @@ -1532,6 +1679,123 @@ int cmd_checkout(int argc, const char **argv, const char *prefix) dwim_remotes_matched); return ret; } else { - return checkout_branch(&opts, &new_branch_info); + return checkout_branch(opts, &new_branch_info); } } + +int cmd_checkout(int argc, const char **argv, const char *prefix) +{ + struct checkout_opts opts; + struct option *options; + struct option checkout_options[] = { + OPT_STRING('b', NULL, &opts.new_branch, N_("branch"), + N_("create and checkout a new branch")), + OPT_STRING('B', NULL, &opts.new_branch_force, N_("branch"), + N_("create/reset and checkout a branch")), + OPT_BOOL('l', NULL, &opts.new_branch_log, N_("create reflog for new branch")), + OPT_BOOL(0, "guess", &opts.dwim_new_local_branch, + N_("second guess 'git checkout <no-such-branch>' (default)")), + OPT_BOOL(0, "overlay", &opts.overlay_mode, N_("use overlay mode (default)")), + OPT_END() + }; + int ret; + + memset(&opts, 0, sizeof(opts)); + opts.dwim_new_local_branch = 1; + opts.switch_branch_doing_nothing_is_ok = 1; + opts.only_merge_on_switching_branches = 0; + opts.accept_ref = 1; + opts.accept_pathspec = 1; + opts.implicit_detach = 1; + opts.can_switch_when_in_progress = 1; + opts.orphan_from_empty_tree = 0; + opts.empty_pathspec_ok = 1; + opts.overlay_mode = -1; + opts.checkout_index = -2; /* default on */ + opts.checkout_worktree = -2; /* default on */ + + options = parse_options_dup(checkout_options); + options = add_common_options(&opts, options); + options = add_common_switch_branch_options(&opts, options); + options = add_checkout_path_options(&opts, options); + + ret = checkout_main(argc, argv, prefix, &opts, + options, checkout_usage); + FREE_AND_NULL(options); + return ret; +} + +int cmd_switch(int argc, const char **argv, const char *prefix) +{ + struct checkout_opts opts; + struct option *options = NULL; + struct option switch_options[] = { + OPT_STRING('c', "create", &opts.new_branch, N_("branch"), + N_("create and switch to a new branch")), + OPT_STRING('C', "force-create", &opts.new_branch_force, N_("branch"), + N_("create/reset and switch to a branch")), + OPT_BOOL(0, "guess", &opts.dwim_new_local_branch, + N_("second guess 'git switch <no-such-branch>'")), + OPT_BOOL(0, "discard-changes", &opts.discard_changes, + N_("throw away local modifications")), + OPT_END() + }; + int ret; + + memset(&opts, 0, sizeof(opts)); + opts.dwim_new_local_branch = 1; + opts.accept_ref = 1; + opts.accept_pathspec = 0; + opts.switch_branch_doing_nothing_is_ok = 0; + opts.only_merge_on_switching_branches = 1; + opts.implicit_detach = 0; + opts.can_switch_when_in_progress = 0; + opts.orphan_from_empty_tree = 1; + opts.overlay_mode = -1; + + options = parse_options_dup(switch_options); + options = add_common_options(&opts, options); + options = add_common_switch_branch_options(&opts, options); + + ret = checkout_main(argc, argv, prefix, &opts, + options, switch_branch_usage); + FREE_AND_NULL(options); + return ret; +} + +int cmd_restore(int argc, const char **argv, const char *prefix) +{ + struct checkout_opts opts; + struct option *options; + struct option restore_options[] = { + OPT_STRING('s', "source", &opts.from_treeish, "<tree-ish>", + N_("where the checkout from")), + OPT_BOOL('S', "staged", &opts.checkout_index, + N_("restore the index")), + OPT_BOOL('W', "worktree", &opts.checkout_worktree, + N_("restore the working tree (default)")), + OPT_BOOL(0, "ignore-unmerged", &opts.ignore_unmerged, + N_("ignore unmerged entries")), + OPT_BOOL(0, "overlay", &opts.overlay_mode, N_("use overlay mode")), + OPT_END() + }; + int ret; + + memset(&opts, 0, sizeof(opts)); + opts.accept_ref = 0; + opts.accept_pathspec = 1; + opts.empty_pathspec_ok = 0; + opts.overlay_mode = 0; + opts.checkout_index = -1; /* default off */ + opts.checkout_worktree = -2; /* default on */ + opts.ignore_unmerged_opt = "--ignore-unmerged"; + + options = parse_options_dup(restore_options); + options = add_common_options(&opts, options); + options = add_checkout_path_options(&opts, options); + + ret = checkout_main(argc, argv, prefix, &opts, + options, restore_usage); + FREE_AND_NULL(options); + return ret; +} diff --git a/builtin/clone.c b/builtin/clone.c index 189ea1c2a0..a4fe72879d 100644 --- a/builtin/clone.c +++ b/builtin/clone.c @@ -494,7 +494,7 @@ static enum { static const char junk_leave_repo_msg[] = N_("Clone succeeded, but checkout failed.\n" "You can inspect what was checked out with 'git status'\n" - "and retry the checkout with 'git checkout -f HEAD'\n"); + "and retry with 'git restore --source=HEAD :/'\n"); static void remove_junk(void) { diff --git a/builtin/commit.c b/builtin/commit.c index 1921401117..851b257867 100644 --- a/builtin/commit.c +++ b/builtin/commit.c @@ -1658,7 +1658,7 @@ int cmd_commit(int argc, const char **argv, const char *prefix) die("%s", err.buf); } - sequencer_post_commit_cleanup(the_repository); + sequencer_post_commit_cleanup(the_repository, 0); unlink(git_path_merge_head(the_repository)); unlink(git_path_merge_msg(the_repository)); unlink(git_path_merge_mode(the_repository)); @@ -1667,7 +1667,7 @@ int cmd_commit(int argc, const char **argv, const char *prefix) if (commit_index_files()) die(_("repository has been updated, but unable to write\n" "new_index file. Check that disk is not full and quota is\n" - "not exceeded, and then \"git reset HEAD\" to recover.")); + "not exceeded, and then \"git restore --staged :/\" to recover.")); if (git_env_bool(GIT_TEST_COMMIT_GRAPH, 0) && write_commit_graph_reachable(get_object_directory(), 0)) diff --git a/builtin/rebase.c b/builtin/rebase.c index 789bf0e5f9..3c7d8b894a 100644 --- a/builtin/rebase.c +++ b/builtin/rebase.c @@ -1610,7 +1610,7 @@ int cmd_rebase(int argc, const char **argv, const char *prefix) if (reset_head(NULL, "reset", NULL, RESET_HEAD_HARD, NULL, NULL) < 0) die(_("could not discard worktree changes")); - remove_branch_state(the_repository); + remove_branch_state(the_repository, 0); if (read_basic_state(&options)) exit(1); goto run_rebase; @@ -1630,7 +1630,7 @@ int cmd_rebase(int argc, const char **argv, const char *prefix) NULL, NULL) < 0) die(_("could not move back to %s"), oid_to_hex(&options.orig_head)); - remove_branch_state(the_repository); + remove_branch_state(the_repository, 0); ret = !!finish_rebase(&options); goto cleanup; } diff --git a/builtin/reset.c b/builtin/reset.c index 26ef9a7bd0..c2bb35a4b7 100644 --- a/builtin/reset.c +++ b/builtin/reset.c @@ -421,7 +421,7 @@ int cmd_reset(int argc, const char **argv, const char *prefix) print_new_head_line(lookup_commit_reference(the_repository, &oid)); } if (!pathspec.nr) - remove_branch_state(the_repository); + remove_branch_state(the_repository, 0); return update_ref_status; } diff --git a/builtin/revert.c b/builtin/revert.c index d4dcedbdc6..4e71b2f2aa 100644 --- a/builtin/revert.c +++ b/builtin/revert.c @@ -203,7 +203,7 @@ static int run_sequencer(int argc, const char **argv, struct replay_opts *opts) if (cmd == 'q') { int ret = sequencer_remove_state(opts); if (!ret) - remove_branch_state(the_repository); + remove_branch_state(the_repository, 0); return ret; } if (cmd == 'c') diff --git a/command-list.txt b/command-list.txt index 3a9af104b5..a9ac72bef4 100644 --- a/command-list.txt +++ b/command-list.txt @@ -59,7 +59,7 @@ git-cat-file plumbinginterrogators git-check-attr purehelpers git-check-ignore purehelpers git-check-mailmap purehelpers -git-checkout mainporcelain history +git-checkout mainporcelain git-checkout-index plumbingmanipulators git-check-ref-format purehelpers git-cherry plumbinginterrogators complete @@ -81,7 +81,7 @@ git-cvsimport foreignscminterface git-cvsserver foreignscminterface git-daemon synchingrepositories git-describe mainporcelain -git-diff mainporcelain history +git-diff mainporcelain info git-diff-files plumbinginterrogators git-diff-index plumbinginterrogators git-diff-tree plumbinginterrogators @@ -150,7 +150,8 @@ git-repack ancillarymanipulators complete git-replace ancillarymanipulators complete git-request-pull foreignscminterface complete git-rerere ancillaryinterrogators -git-reset mainporcelain worktree +git-reset mainporcelain history +git-restore mainporcelain worktree git-revert mainporcelain git-rev-list plumbinginterrogators git-rev-parse plumbinginterrogators @@ -171,6 +172,7 @@ git-status mainporcelain info git-stripspace purehelpers git-submodule mainporcelain git-svn foreignscminterface +git-switch mainporcelain history git-symbolic-ref plumbingmanipulators git-tag mainporcelain history git-unpack-file plumbinginterrogators diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash index 8c6b610a24..e087c4bf00 100644 --- a/contrib/completion/git-completion.bash +++ b/contrib/completion/git-completion.bash @@ -37,7 +37,8 @@ # GIT_COMPLETION_CHECKOUT_NO_GUESS # # When set to "1", do not include "DWIM" suggestions in git-checkout -# completion (e.g., completing "foo" when "origin/foo" exists). +# and git-switch completion (e.g., completing "foo" when "origin/foo" +# exists). case "$COMP_WORDBREAKS" in *:*) : great ;; @@ -2160,6 +2161,44 @@ _git_status () __git_complete_index_file "$complete_opt" } +_git_switch () +{ + case "$cur" in + --conflict=*) + __gitcomp "diff3 merge" "" "${cur##--conflict=}" + ;; + --*) + __gitcomp_builtin switch + ;; + *) + # check if --track, --no-track, or --no-guess was specified + # if so, disable DWIM mode + local track_opt="--track" only_local_ref=n + if [ "$GIT_COMPLETION_CHECKOUT_NO_GUESS" = "1" ] || + [ -n "$(__git_find_on_cmdline "--track --no-track --no-guess")" ]; then + track_opt='' + fi + # explicit --guess enables DWIM mode regardless of + # $GIT_COMPLETION_CHECKOUT_NO_GUESS + if [ -n "$(__git_find_on_cmdline "--guess")" ]; then + track_opt='--track' + fi + if [ -z "$(__git_find_on_cmdline "-d --detach")" ]; then + only_local_ref=y + else + # --guess --detach is invalid combination, no + # dwim will be done when --detach is specified + track_opt= + fi + if [ $only_local_ref = y -a -z "$track_opt" ]; then + __gitcomp_direct "$(__git_heads "" "$cur" " ")" + else + __git_complete_refs $track_opt + fi + ;; + esac +} + __git_config_get_set_variables () { local prevword word config_file= c=$cword @@ -2458,6 +2497,21 @@ _git_reset () __git_complete_refs } +_git_restore () +{ + case "$cur" in + --conflict=*) + __gitcomp "diff3 merge" "" "${cur##--conflict=}" + ;; + --source=*) + __git_complete_refs --cur="${cur##--source=}" + ;; + --*) + __gitcomp_builtin restore + ;; + esac +} + __git_revert_inprogress_options="--continue --quit --abort" _git_revert () diff --git a/git-add--interactive.perl b/git-add--interactive.perl index da5b4ec4bc..c20ae9e210 100755 --- a/git-add--interactive.perl +++ b/git-add--interactive.perl @@ -149,6 +149,20 @@ my %patch_modes = ( FILTER => undef, IS_REVERSE => 0, }, + 'worktree_head' => { + DIFF => 'diff-index -p', + APPLY => sub { apply_patch 'apply -R', @_ }, + APPLY_CHECK => 'apply -R', + FILTER => undef, + IS_REVERSE => 1, + }, + 'worktree_nothead' => { + DIFF => 'diff-index -R -p', + APPLY => sub { apply_patch 'apply', @_ }, + APPLY_CHECK => 'apply', + FILTER => undef, + IS_REVERSE => 0, + }, ); $patch_mode = 'stage'; @@ -1054,6 +1068,12 @@ marked for discarding."), checkout_nothead => N__( "If the patch applies cleanly, the edited hunk will immediately be marked for applying."), + worktree_head => N__( +"If the patch applies cleanly, the edited hunk will immediately be +marked for discarding."), + worktree_nothead => N__( +"If the patch applies cleanly, the edited hunk will immediately be +marked for applying."), ); sub recount_edited_hunk { @@ -1264,6 +1284,18 @@ n - do not apply this hunk to index and worktree q - quit; do not apply this hunk or any of the remaining ones a - apply this hunk and all later hunks in the file d - do not apply this hunk or any of the later hunks in the file"), + worktree_head => N__( +"y - discard this hunk from worktree +n - do not discard this hunk from worktree +q - quit; do not discard this hunk or any of the remaining ones +a - discard this hunk and all later hunks in the file +d - do not discard this hunk or any of the later hunks in the file"), + worktree_nothead => N__( +"y - apply this hunk to worktree +n - do not apply this hunk to worktree +q - quit; do not apply this hunk or any of the remaining ones +a - apply this hunk and all later hunks in the file +d - do not apply this hunk or any of the later hunks in the file"), ); sub help_patch_cmd { @@ -1425,6 +1457,16 @@ my %patch_update_prompt_modes = ( deletion => N__("Apply deletion to index and worktree [y,n,q,a,d%s,?]? "), hunk => N__("Apply this hunk to index and worktree [y,n,q,a,d%s,?]? "), }, + worktree_head => { + mode => N__("Discard mode change from worktree [y,n,q,a,d%s,?]? "), + deletion => N__("Discard deletion from worktree [y,n,q,a,d%s,?]? "), + hunk => N__("Discard this hunk from worktree [y,n,q,a,d%s,?]? "), + }, + worktree_nothead => { + mode => N__("Apply mode change to worktree [y,n,q,a,d%s,?]? "), + deletion => N__("Apply deletion to worktree [y,n,q,a,d%s,?]? "), + hunk => N__("Apply this hunk to worktree [y,n,q,a,d%s,?]? "), + }, ); sub patch_update_file { @@ -1760,6 +1802,16 @@ sub process_args { 'checkout_head' : 'checkout_nothead'); $arg = shift @ARGV or die __("missing --"); } + } elsif ($1 eq 'worktree') { + $arg = shift @ARGV or die __("missing --"); + if ($arg eq '--') { + $patch_mode = 'checkout_index'; + } else { + $patch_mode_revision = $arg; + $patch_mode = ($arg eq 'HEAD' ? + 'worktree_head' : 'worktree_nothead'); + $arg = shift @ARGV or die __("missing --"); + } } elsif ($1 eq 'stage' or $1 eq 'stash') { $patch_mode = $1; $arg = shift @ARGV or die __("missing --"); @@ -566,6 +566,7 @@ static struct cmd_struct commands[] = { { "replace", cmd_replace, RUN_SETUP }, { "rerere", cmd_rerere, RUN_SETUP }, { "reset", cmd_reset, RUN_SETUP }, + { "restore", cmd_restore, RUN_SETUP | NEED_WORK_TREE }, { "rev-list", cmd_rev_list, RUN_SETUP | NO_PARSEOPT }, { "rev-parse", cmd_rev_parse, NO_PARSEOPT }, { "revert", cmd_revert, RUN_SETUP | NEED_WORK_TREE }, @@ -586,6 +587,7 @@ static struct cmd_struct commands[] = { { "status", cmd_status, RUN_SETUP | NEED_WORK_TREE }, { "stripspace", cmd_stripspace }, { "submodule--helper", cmd_submodule__helper, RUN_SETUP | SUPPORT_SUPER_PREFIX | NO_PARSEOPT }, + { "switch", cmd_switch, RUN_SETUP | NEED_WORK_TREE }, { "symbolic-ref", cmd_symbolic_ref, RUN_SETUP }, { "tag", cmd_tag, RUN_SETUP | DELAY_PAGER_CONFIG }, { "unpack-file", cmd_unpack_file, RUN_SETUP | NO_PARSEOPT }, diff --git a/parse-options-cb.c b/parse-options-cb.c index a3de795c58..1240a8514e 100644 --- a/parse-options-cb.c +++ b/parse-options-cb.c @@ -159,6 +159,23 @@ int parse_opt_tertiary(const struct option *opt, const char *arg, int unset) return 0; } +struct option *parse_options_dup(const struct option *o) +{ + struct option *opts; + int nr = 0; + + while (o && o->type != OPTION_END) { + nr++; + o++; + } + + ALLOC_ARRAY(opts, nr + 1); + memcpy(opts, o - nr, sizeof(*o) * nr); + memset(opts + nr, 0, sizeof(*opts)); + opts[nr].type = OPTION_END; + return opts; +} + struct option *parse_options_concat(struct option *a, struct option *b) { struct option *ret; diff --git a/parse-options.h b/parse-options.h index ac6ba8abf9..a4bd40bb6a 100644 --- a/parse-options.h +++ b/parse-options.h @@ -276,6 +276,7 @@ int parse_options_step(struct parse_opt_ctx_t *ctx, int parse_options_end(struct parse_opt_ctx_t *ctx); +struct option *parse_options_dup(const struct option *a); struct option *parse_options_concat(struct option *a, struct option *b); /*----- some often used options -----*/ diff --git a/sequencer.c b/sequencer.c index 4a9b7f1c3f..74a7a47d01 100644 --- a/sequencer.c +++ b/sequencer.c @@ -2314,19 +2314,21 @@ static int have_finished_the_last_pick(void) return ret; } -void sequencer_post_commit_cleanup(struct repository *r) +void sequencer_post_commit_cleanup(struct repository *r, int verbose) { struct replay_opts opts = REPLAY_OPTS_INIT; int need_cleanup = 0; if (file_exists(git_path_cherry_pick_head(r))) { - unlink(git_path_cherry_pick_head(r)); + if (!unlink(git_path_cherry_pick_head(r)) && verbose) + warning(_("cancelling a cherry picking in progress")); opts.action = REPLAY_PICK; need_cleanup = 1; } if (file_exists(git_path_revert_head(r))) { - unlink(git_path_revert_head(r)); + if (!unlink(git_path_revert_head(r)) && verbose) + warning(_("cancelling a revert in progress")); opts.action = REPLAY_REVERT; need_cleanup = 1; } diff --git a/sequencer.h b/sequencer.h index 0c494b83d4..3d0b68c34c 100644 --- a/sequencer.h +++ b/sequencer.h @@ -200,6 +200,6 @@ int read_author_script(const char *path, char **name, char **email, char **date, void parse_strategy_opts(struct replay_opts *opts, char *raw_opts); int write_basic_state(struct replay_opts *opts, const char *head_name, struct commit *onto, const char *orig_head); -void sequencer_post_commit_cleanup(struct repository *r); +void sequencer_post_commit_cleanup(struct repository *r, int verbose); int sequencer_get_last_command(struct repository* r, enum replay_action *action); diff --git a/sha1-name.c b/sha1-name.c index 728e6f1f61..49855ad24f 100644 --- a/sha1-name.c +++ b/sha1-name.c @@ -801,7 +801,7 @@ static int get_oid_basic(struct repository *r, const char *str, int len, "because it will be ignored when you just specify 40-hex. These refs\n" "may be created by mistake. For example,\n" "\n" - " git checkout -b $br $(git rev-parse ...)\n" + " git switch -c $br $(git rev-parse ...)\n" "\n" "where \"$br\" is somehow empty and a 40-hex ref is created. Please\n" "examine these refs and maybe delete them. Turn this message off by\n" diff --git a/t/lib-patch-mode.sh b/t/lib-patch-mode.sh index 06c3c91762..cfd76bf987 100644 --- a/t/lib-patch-mode.sh +++ b/t/lib-patch-mode.sh @@ -2,28 +2,40 @@ . ./test-lib.sh +# set_state <path> <worktree-content> <index-content> +# +# Prepare the content for path in worktree and the index as specified. set_state () { echo "$3" > "$1" && git add "$1" && echo "$2" > "$1" } +# save_state <path> +# +# Save index/worktree content of <path> in the files _worktree_<path> +# and _index_<path> save_state () { noslash="$(echo "$1" | tr / _)" && cat "$1" > _worktree_"$noslash" && git show :"$1" > _index_"$noslash" } +# set_and_save_state <path> <worktree-content> <index-content> set_and_save_state () { set_state "$@" && save_state "$1" } +# verify_state <path> <expected-worktree-content> <expected-index-content> verify_state () { test "$(cat "$1")" = "$2" && test "$(git show :"$1")" = "$3" } +# verify_saved_state <path> +# +# Call verify_state with expected contents from the last save_state verify_saved_state () { noslash="$(echo "$1" | tr / _)" && verify_state "$1" "$(cat _worktree_"$noslash")" "$(cat _index_"$noslash")" diff --git a/t/t1090-sparse-checkout-scope.sh b/t/t1090-sparse-checkout-scope.sh index 090b7fc3d3..40cc004326 100755 --- a/t/t1090-sparse-checkout-scope.sh +++ b/t/t1090-sparse-checkout-scope.sh @@ -31,20 +31,6 @@ test_expect_success 'perform sparse checkout of master' ' test_path_is_file c ' -test_expect_success 'checkout -b checkout.optimizeNewBranch interaction' ' - cp .git/info/sparse-checkout .git/info/sparse-checkout.bak && - test_when_finished " - mv -f .git/info/sparse-checkout.bak .git/info/sparse-checkout - git checkout master - " && - echo "/b" >>.git/info/sparse-checkout && - test "$(git ls-files -t b)" = "S b" && - git -c checkout.optimizeNewBranch=true checkout -b fast && - test "$(git ls-files -t b)" = "S b" && - git checkout -b slow && - test "$(git ls-files -t b)" = "H b" -' - test_expect_success 'merge feature branch into sparse checkout of master' ' git merge feature && test_path_is_file a && diff --git a/t/t2014-switch.sh b/t/t2014-checkout-switch.sh index ccfb147113..ccfb147113 100755 --- a/t/t2014-switch.sh +++ b/t/t2014-checkout-switch.sh diff --git a/t/t2020-checkout-detach.sh b/t/t2020-checkout-detach.sh index 1fa670625c..b748db9946 100755 --- a/t/t2020-checkout-detach.sh +++ b/t/t2020-checkout-detach.sh @@ -195,16 +195,22 @@ test_expect_success 'describe_detached_head prints no SHA-1 ellipsis when not as # The first detach operation is more chatty than the following ones. cat >1st_detach <<-EOF && - Note: checking out 'HEAD^'. + Note: switching to 'HEAD^'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this - state without impacting any branches by performing another checkout. + state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may - do so (now or later) by using -b with the checkout command again. Example: + do so (now or later) by using -c with the switch command. Example: - git checkout -b <new-branch-name> + git switch -c <new-branch-name> + + Or undo this operation with: + + git switch - + + Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at \$commit three EOF @@ -271,16 +277,22 @@ test_expect_success 'describe_detached_head does print SHA-1 ellipsis when asked # The first detach operation is more chatty than the following ones. cat >1st_detach <<-EOF && - Note: checking out 'HEAD^'. + Note: switching to 'HEAD^'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this - state without impacting any branches by performing another checkout. + state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may - do so (now or later) by using -b with the checkout command again. Example: + do so (now or later) by using -c with the switch command. Example: + + git switch -c <new-branch-name> + + Or undo this operation with: + + git switch - - git checkout -b <new-branch-name> + Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at \$commit... three EOF diff --git a/t/t2060-switch.sh b/t/t2060-switch.sh new file mode 100755 index 0000000000..f9efa29dfb --- /dev/null +++ b/t/t2060-switch.sh @@ -0,0 +1,96 @@ +#!/bin/sh + +test_description='switch basic functionality' + +. ./test-lib.sh + +test_expect_success 'setup' ' + test_commit first && + git branch first-branch && + test_commit second && + test_commit third && + git remote add origin nohost:/nopath && + git update-ref refs/remotes/origin/foo first-branch +' + +test_expect_success 'switch branch no arguments' ' + test_must_fail git switch +' + +test_expect_success 'switch branch' ' + git switch first-branch && + test_path_is_missing second.t +' + +test_expect_success 'switch and detach' ' + test_when_finished git switch master && + test_must_fail git switch master^{commit} && + git switch --detach master^{commit} && + test_must_fail git symbolic-ref HEAD +' + +test_expect_success 'switch and detach current branch' ' + test_when_finished git switch master && + git switch master && + git switch --detach && + test_must_fail git symbolic-ref HEAD +' + +test_expect_success 'switch and create branch' ' + test_when_finished git switch master && + git switch -c temp master^ && + test_cmp_rev master^ refs/heads/temp && + echo refs/heads/temp >expected-branch && + git symbolic-ref HEAD >actual-branch && + test_cmp expected-branch actual-branch +' + +test_expect_success 'force create branch from HEAD' ' + test_when_finished git switch master && + git switch --detach master && + test_must_fail git switch -c temp && + git switch -C temp && + test_cmp_rev master refs/heads/temp && + echo refs/heads/temp >expected-branch && + git symbolic-ref HEAD >actual-branch && + test_cmp expected-branch actual-branch +' + +test_expect_success 'new orphan branch from empty' ' + test_when_finished git switch master && + test_must_fail git switch --orphan new-orphan HEAD && + git switch --orphan new-orphan && + test_commit orphan && + git cat-file commit refs/heads/new-orphan >commit && + ! grep ^parent commit && + git ls-files >tracked-files && + echo orphan.t >expected && + test_cmp expected tracked-files +' + +test_expect_success 'switching ignores file of same branch name' ' + test_when_finished git switch master && + : >first-branch && + git switch first-branch && + echo refs/heads/first-branch >expected && + git symbolic-ref HEAD >actual && + test_cmp expected actual +' + +test_expect_success 'guess and create branch ' ' + test_when_finished git switch master && + test_must_fail git switch --no-guess foo && + git switch foo && + echo refs/heads/foo >expected && + git symbolic-ref HEAD >actual && + test_cmp expected actual +' + +test_expect_success 'not switching when something is in progress' ' + test_when_finished rm -f .git/MERGE_HEAD && + # fake a merge-in-progress + cp .git/HEAD .git/MERGE_HEAD && + test_must_fail git switch -d @^ +' + +test_done diff --git a/t/t2070-restore.sh b/t/t2070-restore.sh new file mode 100755 index 0000000000..2650df1966 --- /dev/null +++ b/t/t2070-restore.sh @@ -0,0 +1,98 @@ +#!/bin/sh + +test_description='restore basic functionality' + +. ./test-lib.sh + +test_expect_success 'setup' ' + test_commit first && + echo first-and-a-half >>first.t && + git add first.t && + test_commit second && + echo one >one && + echo two >two && + echo untracked >untracked && + echo ignored >ignored && + echo /ignored >.gitignore && + git add one two .gitignore && + git update-ref refs/heads/one master +' + +test_expect_success 'restore without pathspec is not ok' ' + test_must_fail git restore && + test_must_fail git restore --source=first +' + +test_expect_success 'restore a file, ignoring branch of same name' ' + cat one >expected && + echo dirty >>one && + git restore one && + test_cmp expected one +' + +test_expect_success 'restore a file on worktree from another ref' ' + test_when_finished git reset --hard && + git cat-file blob first:./first.t >expected && + git restore --source=first first.t && + test_cmp expected first.t && + git cat-file blob HEAD:./first.t >expected && + git show :first.t >actual && + test_cmp expected actual +' + +test_expect_success 'restore a file in the index from another ref' ' + test_when_finished git reset --hard && + git cat-file blob first:./first.t >expected && + git restore --source=first --staged first.t && + git show :first.t >actual && + test_cmp expected actual && + git cat-file blob HEAD:./first.t >expected && + test_cmp expected first.t +' + +test_expect_success 'restore a file in both the index and worktree from another ref' ' + test_when_finished git reset --hard && + git cat-file blob first:./first.t >expected && + git restore --source=first --staged --worktree first.t && + git show :first.t >actual && + test_cmp expected actual && + test_cmp expected first.t +' + +test_expect_success 'restore --staged uses HEAD as source' ' + test_when_finished git reset --hard && + git cat-file blob :./first.t >expected && + echo index-dirty >>first.t && + git add first.t && + git restore --staged first.t && + git cat-file blob :./first.t >actual && + test_cmp expected actual +' + +test_expect_success 'restore --ignore-unmerged ignores unmerged entries' ' + git init unmerged && + ( + cd unmerged && + echo one >unmerged && + echo one >common && + git add unmerged common && + git commit -m common && + git switch -c first && + echo first >unmerged && + git commit -am first && + git switch -c second master && + echo second >unmerged && + git commit -am second && + test_must_fail git merge first && + + echo dirty >>common && + test_must_fail git restore . && + + git restore --ignore-unmerged --quiet . >output 2>&1 && + git diff common >diff-output && + test_must_be_empty output && + test_must_be_empty diff-output + ) +' + +test_done diff --git a/t/t2071-restore-patch.sh b/t/t2071-restore-patch.sh new file mode 100755 index 0000000000..98b2476e7c --- /dev/null +++ b/t/t2071-restore-patch.sh @@ -0,0 +1,110 @@ +#!/bin/sh + +test_description='git restore --patch' + +. ./lib-patch-mode.sh + +test_expect_success PERL 'setup' ' + mkdir dir && + echo parent >dir/foo && + echo dummy >bar && + git add bar dir/foo && + git commit -m initial && + test_tick && + test_commit second dir/foo head && + set_and_save_state bar bar_work bar_index && + save_head +' + +test_expect_success PERL 'restore -p without pathspec is fine' ' + echo q >cmd && + git restore -p <cmd +' + +# note: bar sorts before dir/foo, so the first 'n' is always to skip 'bar' + +test_expect_success PERL 'saying "n" does nothing' ' + set_and_save_state dir/foo work head && + test_write_lines n n | git restore -p && + verify_saved_state bar && + verify_saved_state dir/foo +' + +test_expect_success PERL 'git restore -p' ' + set_and_save_state dir/foo work head && + test_write_lines n y | git restore -p && + verify_saved_state bar && + verify_state dir/foo head head +' + +test_expect_success PERL 'git restore -p with staged changes' ' + set_state dir/foo work index && + test_write_lines n y | git restore -p && + verify_saved_state bar && + verify_state dir/foo index index +' + +test_expect_success PERL 'git restore -p --source=HEAD' ' + set_state dir/foo work index && + # the third n is to get out in case it mistakenly does not apply + test_write_lines n y n | git restore -p --source=HEAD && + verify_saved_state bar && + verify_state dir/foo head index +' + +test_expect_success PERL 'git restore -p --source=HEAD^' ' + set_state dir/foo work index && + # the third n is to get out in case it mistakenly does not apply + test_write_lines n y n | git restore -p --source=HEAD^ && + verify_saved_state bar && + verify_state dir/foo parent index +' + +test_expect_success PERL 'git restore -p handles deletion' ' + set_state dir/foo work index && + rm dir/foo && + test_write_lines n y | git restore -p && + verify_saved_state bar && + verify_state dir/foo index index +' + +# The idea in the rest is that bar sorts first, so we always say 'y' +# first and if the path limiter fails it'll apply to bar instead of +# dir/foo. There's always an extra 'n' to reject edits to dir/foo in +# the failure case (and thus get out of the loop). + +test_expect_success PERL 'path limiting works: dir' ' + set_state dir/foo work head && + test_write_lines y n | git restore -p dir && + verify_saved_state bar && + verify_state dir/foo head head +' + +test_expect_success PERL 'path limiting works: -- dir' ' + set_state dir/foo work head && + test_write_lines y n | git restore -p -- dir && + verify_saved_state bar && + verify_state dir/foo head head +' + +test_expect_success PERL 'path limiting works: HEAD^ -- dir' ' + set_state dir/foo work head && + # the third n is to get out in case it mistakenly does not apply + test_write_lines y n n | git restore -p --source=HEAD^ -- dir && + verify_saved_state bar && + verify_state dir/foo parent head +' + +test_expect_success PERL 'path limiting works: foo inside dir' ' + set_state dir/foo work head && + # the third n is to get out in case it mistakenly does not apply + test_write_lines y n n | (cd dir && git restore -p foo) && + verify_saved_state bar && + verify_state dir/foo head head +' + +test_expect_success PERL 'none of this moved HEAD' ' + verify_saved_head +' + +test_done diff --git a/t/t7508-status.sh b/t/t7508-status.sh index e1f11293e2..681bc314b4 100755 --- a/t/t7508-status.sh +++ b/t/t7508-status.sh @@ -94,13 +94,13 @@ test_expect_success 'status --column' ' # (use "git pull" to merge the remote branch into yours) # # Changes to be committed: -# (use "git reset HEAD <file>..." to unstage) +# (use "git restore --staged <file>..." to unstage) # # new file: dir2/added # # Changes not staged for commit: # (use "git add <file>..." to update what will be committed) -# (use "git checkout -- <file>..." to discard changes in working directory) +# (use "git restore <file>..." to discard changes in working directory) # # modified: dir1/modified # @@ -128,13 +128,13 @@ cat >expect <<\EOF # (use "git pull" to merge the remote branch into yours) # # Changes to be committed: -# (use "git reset HEAD <file>..." to unstage) +# (use "git restore --staged <file>..." to unstage) # # new file: dir2/added # # Changes not staged for commit: # (use "git add <file>..." to update what will be committed) -# (use "git checkout -- <file>..." to discard changes in working directory) +# (use "git restore <file>..." to discard changes in working directory) # # modified: dir1/modified # @@ -278,13 +278,13 @@ and have 1 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) + (use "git restore --staged <file>..." to unstage) new file: dir2/added Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified @@ -347,13 +347,13 @@ and have 1 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) + (use "git restore --staged <file>..." to unstage) new file: dir2/added Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified @@ -420,13 +420,13 @@ and have 1 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) + (use "git restore --staged <file>..." to unstage) new file: dir2/added Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified @@ -484,13 +484,13 @@ and have 1 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) + (use "git restore --staged <file>..." to unstage) new file: dir2/added Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified @@ -542,13 +542,13 @@ and have 1 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) + (use "git restore --staged <file>..." to unstage) new file: dir2/added Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified @@ -605,13 +605,13 @@ and have 1 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) + (use "git restore --staged <file>..." to unstage) new file: ../dir2/added Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) + (use "git restore <file>..." to discard changes in working directory) modified: modified @@ -676,13 +676,13 @@ and have 1 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) + (use "git restore --staged <file>..." to unstage) <GREEN>new file: dir2/added<RESET> Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) + (use "git restore <file>..." to discard changes in working directory) <RED>modified: dir1/modified<RESET> @@ -802,13 +802,13 @@ and have 1 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) + (use "git restore --staged <file>..." to unstage) new file: dir2/added Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified @@ -852,7 +852,7 @@ and have 1 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) + (use "git restore --staged <file>..." to unstage) modified: dir1/modified @@ -896,14 +896,14 @@ and have 1 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) + (use "git restore --staged <file>..." to unstage) new file: dir2/added new file: sm Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified @@ -956,14 +956,14 @@ and have 1 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) + (use "git restore --staged <file>..." to unstage) new file: dir2/added new file: sm Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified @@ -1019,7 +1019,7 @@ and have 2 and 2 different commits each, respectively. Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified @@ -1068,14 +1068,14 @@ and have 2 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD^1 <file>..." to unstage) + (use "git restore --source=HEAD^1 --staged <file>..." to unstage) new file: dir2/added new file: sm Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified @@ -1123,13 +1123,13 @@ and have 2 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) + (use "git restore --staged <file>..." to unstage) modified: sm Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified @@ -1235,13 +1235,13 @@ and have 2 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) + (use "git restore --staged <file>..." to unstage) modified: sm Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) + (use "git restore <file>..." to discard changes in working directory) (commit or discard the untracked or modified content in submodules) modified: dir1/modified @@ -1295,13 +1295,13 @@ and have 2 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) + (use "git restore --staged <file>..." to unstage) modified: sm Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified modified: sm (new commits) @@ -1379,13 +1379,13 @@ cat > expect << EOF ; (use "git pull" to merge the remote branch into yours) ; ; Changes to be committed: -; (use "git reset HEAD <file>..." to unstage) +; (use "git restore --staged <file>..." to unstage) ; ; modified: sm ; ; Changes not staged for commit: ; (use "git add <file>..." to update what will be committed) -; (use "git checkout -- <file>..." to discard changes in working directory) +; (use "git restore <file>..." to discard changes in working directory) ; ; modified: dir1/modified ; modified: sm (new commits) @@ -1431,7 +1431,7 @@ and have 2 and 2 different commits each, respectively. Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified @@ -1458,13 +1458,13 @@ and have 2 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) + (use "git restore --staged <file>..." to unstage) modified: sm Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified @@ -1581,13 +1581,13 @@ and have 2 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) + (use "git restore --staged <file>..." to unstage) modified: sm Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified diff --git a/t/t7512-status-help.sh b/t/t7512-status-help.sh index c1eb72555d..b9f5d73423 100755 --- a/t/t7512-status-help.sh +++ b/t/t7512-status-help.sh @@ -85,7 +85,7 @@ You are currently rebasing branch '\''rebase_conflicts'\'' on '\''$ONTO'\''. (use "git rebase --abort" to check out the original branch) Unmerged paths: - (use "git reset HEAD <file>..." to unstage) + (use "git restore --staged <file>..." to unstage) (use "git add <file>..." to mark resolution) both modified: main.txt @@ -110,7 +110,7 @@ You are currently rebasing branch '\''rebase_conflicts'\'' on '\''$ONTO'\''. (all conflicts fixed: run "git rebase --continue") Changes to be committed: - (use "git reset HEAD <file>..." to unstage) + (use "git restore --staged <file>..." to unstage) modified: main.txt @@ -148,7 +148,7 @@ You are currently rebasing branch '\''rebase_i_conflicts_second'\'' on '\''$ONTO (use "git rebase --abort" to check out the original branch) Unmerged paths: - (use "git reset HEAD <file>..." to unstage) + (use "git restore --staged <file>..." to unstage) (use "git add <file>..." to mark resolution) both modified: main.txt @@ -176,7 +176,7 @@ You are currently rebasing branch '\''rebase_i_conflicts_second'\'' on '\''$ONTO (all conflicts fixed: run "git rebase --continue") Changes to be committed: - (use "git reset HEAD <file>..." to unstage) + (use "git restore --staged <file>..." to unstage) modified: main.txt @@ -246,7 +246,7 @@ You are currently splitting a commit while rebasing branch '\''split_commit'\'' Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) + (use "git restore <file>..." to discard changes in working directory) modified: main.txt @@ -354,7 +354,7 @@ You are currently splitting a commit while rebasing branch '\''several_edits'\'' Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) + (use "git restore <file>..." to discard changes in working directory) modified: main.txt @@ -453,7 +453,7 @@ You are currently splitting a commit while rebasing branch '\''several_edits'\'' Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) + (use "git restore <file>..." to discard changes in working directory) modified: main.txt @@ -557,7 +557,7 @@ You are currently splitting a commit while rebasing branch '\''several_edits'\'' Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) + (use "git restore <file>..." to discard changes in working directory) modified: main.txt @@ -834,7 +834,7 @@ You are currently reverting commit $TO_REVERT. (use "git revert --abort" to cancel the revert operation) Unmerged paths: - (use "git reset HEAD <file>..." to unstage) + (use "git restore --staged <file>..." to unstage) (use "git add <file>..." to mark resolution) both modified: to-revert.txt @@ -855,7 +855,7 @@ You are currently reverting commit $TO_REVERT. (use "git revert --abort" to cancel the revert operation) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) + (use "git restore --staged <file>..." to unstage) modified: to-revert.txt diff --git a/unpack-trees.c b/unpack-trees.c index 50189909b8..dab713203e 100644 --- a/unpack-trees.c +++ b/unpack-trees.c @@ -315,7 +315,7 @@ static struct progress *get_progress(struct unpack_trees_options *o) total++; } - return start_delayed_progress(_("Checking out files"), total); + return start_delayed_progress(_("Updating files"), total); } static void setup_collided_checkout_detection(struct checkout *state, diff --git a/wt-status.c b/wt-status.c index c29e4bf091..dd5270647e 100644 --- a/wt-status.c +++ b/wt-status.c @@ -179,9 +179,15 @@ static void wt_longstatus_print_unmerged_header(struct wt_status *s) return; if (s->whence != FROM_COMMIT) ; - else if (!s->is_initial) - status_printf_ln(s, c, _(" (use \"git reset %s <file>...\" to unstage)"), s->reference); - else + else if (!s->is_initial) { + if (!strcmp(s->reference, "HEAD")) + status_printf_ln(s, c, + _(" (use \"git restore --staged <file>...\" to unstage)")); + else + status_printf_ln(s, c, + _(" (use \"git restore --source=%s --staged <file>...\" to unstage)"), + s->reference); + } else status_printf_ln(s, c, _(" (use \"git rm --cached <file>...\" to unstage)")); if (!both_deleted) { @@ -206,9 +212,15 @@ static void wt_longstatus_print_cached_header(struct wt_status *s) return; if (s->whence != FROM_COMMIT) ; /* NEEDSWORK: use "git reset --unresolve"??? */ - else if (!s->is_initial) - status_printf_ln(s, c, _(" (use \"git reset %s <file>...\" to unstage)"), s->reference); - else + else if (!s->is_initial) { + if (!strcmp(s->reference, "HEAD")) + status_printf_ln(s, c + , _(" (use \"git restore --staged <file>...\" to unstage)")); + else + status_printf_ln(s, c, + _(" (use \"git restore --source=%s --staged <file>...\" to unstage)"), + s->reference); + } else status_printf_ln(s, c, _(" (use \"git rm --cached <file>...\" to unstage)")); status_printf_ln(s, c, "%s", ""); } @@ -226,7 +238,7 @@ static void wt_longstatus_print_dirty_header(struct wt_status *s, status_printf_ln(s, c, _(" (use \"git add <file>...\" to update what will be committed)")); else status_printf_ln(s, c, _(" (use \"git add/rm <file>...\" to update what will be committed)")); - status_printf_ln(s, c, _(" (use \"git checkout -- <file>...\" to discard changes in working directory)")); + status_printf_ln(s, c, _(" (use \"git restore <file>...\" to discard changes in working directory)")); if (has_dirty_submodules) status_printf_ln(s, c, _(" (commit or discard the untracked or modified content in submodules)")); status_printf_ln(s, c, "%s", ""); |