| Age | Commit message (Collapse) | Author |
|---|
|
Remove unused header "#include".
* en/header-cleanup:
treewide: remove unnecessary includes in source files
treewide: add direct includes currently only pulled in transitively
trace2/tr2_tls.h: remove unnecessary include
submodule-config.h: remove unnecessary include
pkt-line.h: remove unnecessary include
line-log.h: remove unnecessary include
http.h: remove unnecessary include
fsmonitor--daemon.h: remove unnecessary includes
blame.h: remove unnecessary includes
archive.h: remove unnecessary include
treewide: remove unnecessary includes in source files
treewide: remove unnecessary includes from header files
|
|
Code clean-up.
* la/trailer-cleanups:
trailer: use offsets for trailer_start/trailer_end
trailer: find the end of the log message
commit: ignore_non_trailer computes number of bytes to ignore
|
|
Each of these were checked with
gcc -E -I. ${SOURCE_FILE} | grep ${HEADER_FILE}
to ensure that removing the direct inclusion of the header actually
resulted in that header no longer being included at all (i.e. that
no other header pulled it in transitively).
...except for a few cases where we verified that although the header
was brought in transitively, nothing from it was directly used in
that source file. These cases were:
* builtin/credential-cache.c
* builtin/pull.c
* builtin/send-pack.c
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 7a5d604443 (commit: detect commits that exist in commit-graph but not
in the ODB, 2023-10-31), we have introduced a new object existence check
into `repo_parse_commit_internal()` so that we do not parse commits via
the commit-graph that don't have a corresponding object in the object
database. This new check of course comes with a performance penalty,
which the commit put at around 30% for `git rev-list --topo-order`. But
there are in fact scenarios where the performance regression is even
higher. The following benchmark against linux.git with a fully-build
commit-graph:
Benchmark 1: git.v2.42.1 rev-list --count HEAD
Time (mean ± σ): 658.0 ms ± 5.2 ms [User: 613.5 ms, System: 44.4 ms]
Range (min … max): 650.2 ms … 666.0 ms 10 runs
Benchmark 2: git.v2.43.0-rc1 rev-list --count HEAD
Time (mean ± σ): 1.333 s ± 0.019 s [User: 1.263 s, System: 0.069 s]
Range (min … max): 1.302 s … 1.361 s 10 runs
Summary
git.v2.42.1 rev-list --count HEAD ran
2.03 ± 0.03 times faster than git.v2.43.0-rc1 rev-list --count HEAD
While it's a noble goal to ensure that results are the same regardless
of whether or not we have a potentially stale commit-graph, taking twice
as much time is a tough sell. Furthermore, we can generally assume that
the commit-graph will be updated by git-gc(1) or git-maintenance(1) as
required so that the case where the commit-graph is stale should not at
all be common.
With that in mind, default-disable GIT_COMMIT_GRAPH_PARANOIA and restore
the behaviour and thus performance previous to the mentioned commit. In
order to not be inconsistent, also disable this behaviour by default in
`lookup_commit_in_graph()`, where the object existence check has been
introduced right at its inception via f559d6d45e (revision: avoid
hitting packfiles when commits are in commit-graph, 2021-08-09).
This results in another speedup in commands that end up calling this
function, even though it's less pronounced compared to the above
benchmark. The following has been executed in linux.git with ~1.2
million references:
Benchmark 1: GIT_COMMIT_GRAPH_PARANOIA=true git rev-list --all --no-walk=unsorted
Time (mean ± σ): 2.947 s ± 0.003 s [User: 2.412 s, System: 0.534 s]
Range (min … max): 2.943 s … 2.949 s 3 runs
Benchmark 2: GIT_COMMIT_GRAPH_PARANOIA=false git rev-list --all --no-walk=unsorted
Time (mean ± σ): 2.724 s ± 0.030 s [User: 2.207 s, System: 0.514 s]
Range (min … max): 2.704 s … 2.759 s 3 runs
Summary
GIT_COMMIT_GRAPH_PARANOIA=false git rev-list --all --no-walk=unsorted ran
1.08 ± 0.01 times faster than GIT_COMMIT_GRAPH_PARANOIA=true git rev-list --all --no-walk=unsorted
So whereas 7a5d604443 initially introduced the logic to start doing an
object existence check in `repo_parse_commit_internal()` by default, the
updated logic will now instead cause `lookup_commit_in_graph()` to stop
doing the check by default. This behaviour continues to be tweakable by
the user via the GIT_COMMIT_GRAPH_PARANOIA environment variable.
Note that this requires us to amend some tests to manually turn on the
paranoid checks again. This is because we cause repository corruption by
manually deleting objects which are part of the commit graph already.
These circumstances shouldn't usually happen in repositories.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit graphs can become stale and contain references to commits that do
not exist in the object database anymore. Theoretically, this can lead
to a scenario where we are able to successfully look up any such commit
via the commit graph even though such a lookup would fail if done via
the object database directly.
As the commit graph is mostly intended as a sort of cache to speed up
parsing of commits we do not want to have diverging behaviour in a
repository with and a repository without commit graphs, no matter
whether they are stale or not. As commits are otherwise immutable, the
only thing that we really need to care about is thus the presence or
absence of a commit.
To address potentially stale commit data that may exist in the graph,
our `lookup_commit_in_graph()` function will check for the commit's
existence in both the commit graph, but also in the object database. So
even if we were able to look up the commit's data in the graph, we would
still pretend as if the commit didn't exist if it is missing in the
object database.
We don't have the same safety net in `parse_commit_in_graph_one()`
though. This function is mostly used internally in "commit-graph.c"
itself to validate the commit graph, and this usage is fine. We do
expose its functionality via `parse_commit_in_graph()` though, which
gets called by `repo_parse_commit_internal()`, and that function is in
turn used in many places in our codebase.
For all I can see this function is never used to directly turn an object
ID into a commit object without additional safety checks before or after
this lookup. What it is being used for though is to walk history via the
parent chain of commits. So when commits in the parent chain of a graph
walk are missing it is possible that we wouldn't notice if that missing
commit was part of the commit graph. Thus, a query like `git rev-parse
HEAD~2` can succeed even if the intermittent commit is missing.
It's unclear whether there are additional ways in which such stale
commit graphs can lead to problems. In any case, it feels like this is a
bigger bug waiting to happen when we gain additional direct or indirect
callers of `repo_parse_commit_internal()`. So let's fix the inconsistent
behaviour by checking for object existence via the object database, as
well.
This check of course comes with a performance penalty. The following
benchmarks have been executed in a clone of linux.git with stable tags
added:
Benchmark 1: git -c core.commitGraph=true rev-list --topo-order --all (git = master)
Time (mean ± σ): 2.913 s ± 0.018 s [User: 2.363 s, System: 0.548 s]
Range (min … max): 2.894 s … 2.950 s 10 runs
Benchmark 2: git -c core.commitGraph=true rev-list --topo-order --all (git = pks-commit-graph-inconsistency)
Time (mean ± σ): 3.834 s ± 0.052 s [User: 3.276 s, System: 0.556 s]
Range (min … max): 3.780 s … 3.961 s 10 runs
Benchmark 3: git -c core.commitGraph=false rev-list --topo-order --all (git = master)
Time (mean ± σ): 13.841 s ± 0.084 s [User: 13.152 s, System: 0.687 s]
Range (min … max): 13.714 s … 13.995 s 10 runs
Benchmark 4: git -c core.commitGraph=false rev-list --topo-order --all (git = pks-commit-graph-inconsistency)
Time (mean ± σ): 13.762 s ± 0.116 s [User: 13.094 s, System: 0.667 s]
Range (min … max): 13.645 s … 14.038 s 10 runs
Summary
git -c core.commitGraph=true rev-list --topo-order --all (git = master) ran
1.32 ± 0.02 times faster than git -c core.commitGraph=true rev-list --topo-order --all (git = pks-commit-graph-inconsistency)
4.72 ± 0.05 times faster than git -c core.commitGraph=false rev-list --topo-order --all (git = pks-commit-graph-inconsistency)
4.75 ± 0.04 times faster than git -c core.commitGraph=false rev-list --topo-order --all (git = master)
We look at a ~30% regression in general, but in general we're still a
whole lot faster than without the commit graph. To counteract this, the
new check can be turned off with the `GIT_COMMIT_GRAPH_PARANOIA` envvar.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
ignore_non_trailer() returns the _number of bytes_ that should be
ignored from the end of the log message. It does not by itself "ignore"
anything.
Rename this function to remove the leading "ignore" verb, to sound more
like a quantity than an action.
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Command line parser fix.
* rs/pack-objects-parseopt-fix:
pack-objects: fix --no-quiet
pack-objects: fix --no-keep-true-parents
|
|
Since 99fb6e04cb (pack-objects: convert to use parse_options(),
2012-02-01) git pack-objects has accepted --no-keep-true-parents, but
this option does the same as --keep-true-parents. That's because it's
defined using OPT_SET_INT with a value of 0, which sets 0 when negated
as well.
Turn --no-keep-true-parents into the opposite of --keep-true-parents by
using OPT_BOOL and storing the option's status directly in a variable
named "grafts_keep_true_parents" instead of in negative form in
"grafts_replace_parents".
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The vast majority of files including object-store.h did not need dir.h
nor khash.h. Split the header into two files, and let most just depend
upon object-store-ll.h, while letting the two callers that need it
depend on the full object-store.h.
After this patch:
$ git grep -h include..object-store | sort | uniq -c
2 #include "object-store.h"
129 #include "object-store-ll.h"
Diff best viewed with `--color-moved`.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
More header clean-up.
* en/header-split-cache-h-part-2: (22 commits)
reftable: ensure git-compat-util.h is the first (indirect) include
diff.h: reduce unnecessary includes
object-store.h: reduce unnecessary includes
commit.h: reduce unnecessary includes
fsmonitor: reduce includes of cache.h
cache.h: remove unnecessary headers
treewide: remove cache.h inclusion due to previous changes
cache,tree: move basic name compare functions from read-cache to tree
cache,tree: move cmp_cache_name_compare from tree.[ch] to read-cache.c
hash-ll.h: split out of hash.h to remove dependency on repository.h
tree-diff.c: move S_DIFFTREE_IFXMIN_NEQ define from cache.h
dir.h: move DTYPE defines from cache.h
versioncmp.h: move declarations for versioncmp.c functions from cache.h
ws.h: move declarations for ws.c functions from cache.h
match-trees.h: move declarations for match-trees.c functions from cache.h
pkt-line.h: move declarations for pkt-line.c functions from cache.h
base85.h: move declarations for base85.c functions from cache.h
copy.h: move declarations for copy.c functions from cache.h
server-info.h: move declarations for server-info.c functions from cache.h
packfile.h: move pack_window and pack_entry from cache.h
...
|
|
The commit object parser has been taught to be a bit more lenient
to parse timestamps on the author/committer line with a malformed
author/committer ident.
* jk/parse-commit-with-malformed-ident:
parse_commit(): describe more date-parsing failure modes
parse_commit(): handle broken whitespace-only timestamp
parse_commit(): parse timestamp from end of line
t4212: avoid putting git on left-hand side of pipe
|
|
The previous few commits improved the parsing of dates in malformed
commit objects. But there's one big case left implicit: we may still
feed garbage to parse_timestamp(). This is preferable to trying to be
more strict, but let's document the thinking in a comment.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The comment in parse_commit_date() claims that parse_timestamp() will
not walk past the end of the buffer we've been given, since it will hit
the newline at "eol" and stop. This is usually true, when dateptr
contains actual numbers to parse. But with a line like:
committer name <email> \n
with just whitespace, and no numbers, parse_timestamp() will consume
that newline as part of the leading whitespace, and we may walk past our
"tail" pointer (which itself is set from the "size" parameter passed in
to parse_commit_buffer()).
In practice this can't cause us to walk off the end of an array, because
we always add an extra NUL byte to the end of objects we load from disk
(as a defense against exactly this kind of bug). However, you can see
the behavior in action when "committer" is the final header (which it
usually is, unless there's an encoding) and the subject line can be
parsed as an integer. We walk right past the newline on the committer
line, as well as the "\n\n" separator, and mistake the subject for the
timestamp.
We can solve this by trimming the whitespace ourselves, making sure that
it has some non-whitespace to parse. Note that we need to be a bit
careful about the definition of "whitespace" here, as our isspace()
doesn't match exotic characters like vertical tab or formfeed. We can
work around that by checking for an actual number (see the in-code
comment). This is slightly more restrictive than the current code, but
in practice the results are either the same (we reject "foo" as "0", but
so would parse_timestamp()) or extremely unlikely even for broken
commits (parse_timestamp() would allow "\v123" as "123", but we'll now
make it "0").
I did also allow "-" here, which may be controversial, as we don't
currently support negative timestamps. My reasoning was two-fold. One,
the design of parse_timestamp() is such that we should be able to easily
switch it to handling signed values, and this otherwise creates a
hard-to-find gotcha that anybody doing that work would get tripped up
on. And two, the status quo is that we currently parse them, though the
result of course ends up as a very large unsigned value (which is likely
to just get clamped to "0" for display anyway, since our date routines
can't handle it).
The new test checks the commit parser (via "--until") for both vanilla
spaces and the vertical-tab case. I also added a test to check these
against the pretty-print formatter, which uses split_ident_line(). It's
not subject to the same bug, because it already insists that there be
one or more digits in the timestamp.
Helped-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To find the committer timestamp, we parse left-to-right looking for the
closing ">" of the email, and then expect the timestamp right after
that. But we've seen some broken cases in the wild where this fails, but
we _could_ find the timestamp with a little extra work. E.g.:
Name <Name<email>> 123456789 -0500
This means that features that rely on the committer timestamp, like
--since or --until, will treat the commit as happening at time 0 (i.e.,
1970).
This is doubly confusing because the pretty-print parser learned to
handle these in 03818a4a94 (split_ident: parse timestamp from end of
line, 2013-10-14). So printing them via "git show", etc, makes
everything look normal, but --until, etc are still broken (despite the
fact that that commit explicitly mentioned --until!).
So let's use the same trick as 03818a4a94: find the end of the line, and
parse back to the final ">". In theory we could use split_ident_line()
here, but it's actually a bit more strict. In particular, it requires a
valid time-zone token, too. That should be present, of course, but we
wouldn't want to break --until for cases that are working currently.
We might want to teach split_ident_line() to become more lenient there,
but it would require checking its many callers (since right now they can
assume that if date_start is non-NULL, so is tz_start).
So for now we'll just reimplement the same trick in the commit parser.
The test is in t4212, which already covers similar cases, courtesy of
03818a4a94. We'll just adjust the broken commit to munge both the author
and committer timestamps. Note that we could match (author|committer)
here, but alternation can't be used portably in sed. Since we wouldn't
expect to see ">" except as part of an ident line, we can just match
that character on any line.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
en/header-split-cache-h
* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
|
|
Apply the part of "the_repository.pending.cocci" pertaining to
"refs.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Apply the part of "the_repository.pending.cocci" pertaining to
"object-store.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Apply the part of "the_repository.pending.cocci" pertaining to
"commit.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Apply the part of "the_repository.pending.cocci" pertaining to
"commit-reach.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Apply the part of "the_repository.pending.cocci" pertaining to
"cache.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is one step towards making strbuf.c not depend upon cache.h.
Additional steps will follow in subsequent commits.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
More work towards -Wunused.
* jk/unused-post-2.39-part2: (21 commits)
help: mark unused parameter in git_unknown_cmd_config()
run_processes_parallel: mark unused callback parameters
userformat_want_item(): mark unused parameter
for_each_commit_graft(): mark unused callback parameter
rewrite_parents(): mark unused callback parameter
fetch-pack: mark unused parameter in callback function
notes: mark unused callback parameters
prio-queue: mark unused parameters in comparison functions
for_each_object: mark unused callback parameters
list-objects: mark unused callback parameters
mark unused parameters in signal handlers
run-command: mark error routine parameters as unused
mark "pointless" data pointers in callbacks
ref-filter: mark unused callback parameters
http-backend: mark unused parameters in virtual functions
http-backend: mark argc/argv unused
object-name: mark unused parameters in disambiguate callbacks
serve: mark unused parameters in virtual functions
serve: use repository pointer to get config
ls-refs: drop config caching
...
|
|
The prio_queue_compare_fn interface has a void pointer to allow callers
to pass arbitrary data, but most comparison functions don't need it.
Mark those cases to make -Wunused-parameter happy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a memory leak that's been with us since d96855ff517 (merge-base:
teach "--fork-point" mode, 2013-10-23).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Even in a repository with promisor remote, it is useless to
attempt to lazily attempt fetching an object that is expected to be
commit, because no "filter" mode omits commit objects. Take
advantage of this assumption to fail fast on errors.
* jt/avoid-lazy-fetch-commits:
commit: don't lazy-fetch commits
object-file: emit corruption errors when detected
object-file: refactor map_loose_object_1()
object-file: remove OBJECT_INFO_IGNORE_LOOSE
|
|
Code clean-up.
* rs/clear-commit-marks-cleanup:
commit: skip already cleared parents in clear_commit_marks_1()
|
|
When parsing commits, fail fast when the commit is missing or
corrupt, instead of attempting to fetch them. This is done by inlining
repo_read_object_file() and setting the flag that prevents fetching.
This is motivated by a situation in which through a bug (not necessarily
through Git), there was corruption in the object store of a partial
clone. In this particular case, the problem was exposed when "git gc"
tried to expire reflogs, which calls repo_parse_commit(), which triggers
fetches of the missing commits.
(There are other possible solutions to this problem including passing an
argument from "git gc" to "git reflog" to inhibit all lazy fetches, but
I think that this fix is at the wrong level - fixing "git reflog" means
that this particular command works fine, or so we think (it will fail if
it somehow needs to read a legitimately missing blob, say, a .gitmodules
file), but fixing repo_parse_commit() will fix a whole class of bugs.)
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Don't put clean parents on the pending list, as they and their ancestors
don't need any treatment and would be skipped later anyway. This saves
the allocation and release of a commit list item in ca. 20% of the cases
during a run of the test suite.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase --keep-base" used to discard the commits that are
already cherry-picked to the upstream, even when "keep-base" meant
that the base, on top of which the history is being rebuilt, does
not yet include these cherry-picked commits. The --keep-base
option now implies --reapply-cherry-picks and --no-fork-point
options.
* pw/rebase-keep-base-fixes:
rebase --keep-base: imply --no-fork-point
rebase --keep-base: imply --reapply-cherry-picks
rebase: factor out branch_base calculation
rebase: rename merge_base to branch_base
rebase: store orig_head as a commit
rebase: be stricter when reading state files containing oids
t3416: set $EDITOR in subshell
t3416: tighten two tests
|
|
The state files for 'onto' and 'orig_head' should contain a full hex
oid, change the reading functions from get_oid() to get_oid_hex() to
reflect this. They should also name commits and not tags so add and use
a function that looks up a commit from an oid like
lookup_commit_reference() but without dereferencing tags.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As reported in [1] the "UNUSED(var)" macro introduced in
2174b8c75de (Merge branch 'jk/unused-annotation' into next,
2022-08-24) breaks coccinelle's parsing of our sources in files where
it occurs.
Let's instead partially go with the approach suggested in [2] of
making this not take an argument. As noted in [1] "coccinelle" will
ignore such tokens in argument lists that it doesn't know about, and
it's less of a surprise to syntax highlighters.
This undoes the "help us notice when a parameter marked as unused is
actually use" part of 9b240347543 (git-compat-util: add UNUSED macro,
2022-08-19), a subsequent commit will further tweak the macro to
implement a replacement for that functionality.
1. https://lore.kernel.org/git/220825.86ilmg4mil.gmgdl@evledraar.gmail.com/
2. https://lore.kernel.org/git/220819.868rnk54ju.gmgdl@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Functions used with for_each_reflog_ent() need to conform to a
particular interface, but not every function needs all of the
parameters. Mark the unused ones to make -Wunused-parameter happy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make our mergesort implementation type-safe.
* rs/mergesort:
mergesort: remove llist_mergesort()
packfile: use DEFINE_LIST_SORT
fetch-pack: use DEFINE_LIST_SORT
commit: use DEFINE_LIST_SORT
blame: use DEFINE_LIST_SORT
test-mergesort: use DEFINE_LIST_SORT
test-mergesort: use DEFINE_LIST_SORT_DEBUG
mergesort: add macros for typed sort of linked lists
mergesort: tighten merge loop
mergesort: unify ranks loops
|
|
Use DEFINE_LIST_SORT to build a typed sort function for commit_list
entries instead of calling llist_mergesort(). This gets rid of the next
pointer accessor functions and their calling overhead at the cost of a
slightly increased object text size.
Before:
__TEXT __DATA __OBJC others dec hex
18795 92 0 104654 123541 1e295 commit.o
With this patch:
__TEXT __DATA __OBJC others dec hex
18963 92 0 106094 125149 1e8dd commit.o
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some config variables are combinations of multiple words, and we
typically write them in camelCase forms in manpage and translatable
strings. It's not easy to find mismatches for these camelCase config
variables during code reviews, but occasionally they are identified
during localization translations.
To check for mismatched config variables, I introduced a new feature
in the helper program for localization[^1]. The following mismatched
config variables have been identified by running the helper program,
such as "git-po-helper check-pot".
Lowercase in manpage should use camelCase:
* Documentation/config/http.txt: http.pinnedpubkey
Lowercase in translable strings should use camelCase:
* builtin/fast-import.c: pack.indexversion
* builtin/gc.c: gc.logexpiry
* builtin/index-pack.c: pack.indexversion
* builtin/pack-objects.c: pack.indexversion
* builtin/repack.c: pack.writebitmaps
* commit.c: i18n.commitencoding
* gpg-interface.c: user.signingkey
* http.c: http.postbuffer
* submodule-config.c: submodule.fetchjobs
Mismatched camelCases, choose the former:
* Documentation/config/transfer.txt: transfer.credentialsInUrl
remote.c: transfer.credentialsInURL
[^1]: https://github.com/git-l10n/git-po-helper
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Updating the graft information invalidates the list of parents of
in-core commit objects that used to be in the graft file.
* jt/unparse-commit-upon-graft-change:
commit,shallow: unparse commits if grafts changed
|
|
Plug the memory leaks from the trickiest API of all, the revision
walker.
* ab/plug-leak-in-revisions: (27 commits)
revisions API: add a TODO for diff_free(&revs->diffopt)
revisions API: have release_revisions() release "topo_walk_info"
revisions API: have release_revisions() release "date_mode"
revisions API: call diff_free(&revs->pruning) in revisions_release()
revisions API: release "reflog_info" in release revisions()
revisions API: clear "boundary_commits" in release_revisions()
revisions API: have release_revisions() release "prune_data"
revisions API: have release_revisions() release "grep_filter"
revisions API: have release_revisions() release "filter"
revisions API: have release_revisions() release "cmdline"
revisions API: have release_revisions() release "mailmap"
revisions API: have release_revisions() release "commits"
revisions API users: use release_revisions() for "prune_data" users
revisions API users: use release_revisions() with UNLEAK()
revisions API users: use release_revisions() in builtin/log.c
revisions API users: use release_revisions() in http-push.c
revisions API users: add "goto cleanup" for release_revisions()
stash: always have the owner of "stash_info" free it
revisions API users: use release_revisions() needing REV_INFO_INIT
revision.[ch]: document and move code declared around "init"
...
|
|
When a commit is parsed, it pretends to have a different (possibly
empty) list of parents if there is graft information for that commit.
But there is a bug that could occur when a commit is parsed, the graft
information is updated (for example, when a shallow file is rewritten),
and the same commit is subsequently used: the parents of the commit do
not conform to the updated graft information, but the information at the
time of parsing.
This is usually not an issue, as a commit is usually introduced into the
repository at the same time as its graft information. That means that
when we try to parse that commit, we already have its graft information.
But it is an issue when fetching a shallow point directly into a
repository with submodules. The function
assign_shallow_commits_to_refs() parses all sought objects (including
the shallow point, which we are directly fetching). In update_shallow()
in fetch-pack.c, assign_shallow_commits_to_refs() is called before
commit_shallow_file(), which means that the shallow point would have
been parsed before graft information is updated. Once a commit is
parsed, it is no longer sensitive to any graft information updates. This
parsed commit is subsequently used when we do a revision walk to search
for submodules to fetch, meaning that the commit is considered to have
parents even though it is a shallow point (and therefore should be
treated as having no parents).
Therefore, whenever graft information is updated, mark the commits that
were previously grafts and the commits that are newly grafts as
unparsed.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add and apply coccinelle rules to remove "if (E)" before
"free_commit_list(E)", the function can accept NULL, and further
change cases where "E = NULL" followed to also be unconditionally.
The code changes in this commit were entirely made by the coccinelle
rule being added here, and applied with:
make contrib/coccinelle/free.cocci.patch
patch -p1 <contrib/coccinelle/free.cocci.patch
The only manual intervention here is that the the relevant code in
commit.c has been manually re-indented.
Suggested-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Regression fix.
* ab/racy-hooks:
hooks: fix "invoked hook" regression in a8cc5943338
|
|
Fix a regression in a8cc5943338 (hooks: fix an obscure TOCTOU "did we
just run a hook?" race, 2022-03-07): The "invoked_hook" variable
passed to run_commit_hook() wasn't passed forward to run_hooks_opt(),
as push_to_checkout() in that commit correctly did.
Whether we ran the code contingent on having run the hook or not was
thus undefined, but in practice on most (all?) modern platforms we'd
have run it (almost?) all the time, since stack variables will get
initialized to some random value, which most of the time isn't "0".
This bug was revealed by running e.g. "t5537-fetch-shallow.sh" with
the --valgrind option. Unfortunately running the whole test suite with
--valgrind is really slow, so we didn't have a CI job that spotted
this. The --valgrind output was:
==31275== Conditional jump or move depends on uninitialised value(s)
==31275== at 0x43C63F: prepare_to_commit (commit.c:1058)
==31275== by 0x4396A5: cmd_commit (commit.c:1722)
==31275== by 0x407C8A: run_builtin (git.c:465)
==31275== by 0x406741: handle_builtin (git.c:718)
==31275== by 0x407665: run_argv (git.c:785)
==31275== by 0x406500: cmd_main (git.c:916)
==31275== by 0x510839: main (common-main.c:56)
==31275== Uninitialised value was created by a stack allocation
==31275== at 0x43B344: prepare_to_commit (commit.c:719)
Reported-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When reset_repository_shallow() is called, Git clears its cache of
shallow information, so that if shallow information is re-requested, Git
will read fresh data from disk instead of reusing its stale cached data.
However, the cache of commit grafts is not likewise cleared, even though
there are commit grafts created from shallow information.
This means that if on-disk shallow information were to be updated and
then a commit-graft-using codepath were run (for example, a revision
walk), Git would be using stale commit graft information. This can be
seen from the test in this patch, in which Git performs a revision walk
(to check for changed submodules) after a fetch with --update-shallow.
Therefore, clear the cache of commit grafts whenever
reset_repository_shallow() is called.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up to allow callers of run_commit_hook() to learn if it
got "success" because the hook succeeded or because there wasn't
any hook.
* ab/racy-hooks:
hooks: fix an obscure TOCTOU "did we just run a hook?" race
merge: don't run post-hook logic on --no-verify
|
|
Object-file API shuffling.
* ab/object-file-api-updates:
object-file API: pass an enum to read_object_with_reference()
object-file.c: add a literal version of write_object_file_prepare()
object-file API: have hash_object_file() take "enum object_type"
object API: rename hash_object_file_literally() to write_*()
object-file API: split up and simplify check_object_signature()
object API users + docs: check <0, not !0 with check_object_signature()
object API docs: move check_object_signature() docs to cache.h
object API: correct "buf" v.s. "map" mismatch in *.c and *.h
object-file API: have write_object_file() take "enum object_type"
object-file API: add a format_object_header() function
object-file API: return "void", not "int" from hash_object_file()
object-file.c: split up declaration of unrelated variables
|
