| Age | Commit message (Collapse) | Author |
|---|
|
Remove unused header "#include".
* en/header-cleanup:
treewide: remove unnecessary includes in source files
treewide: add direct includes currently only pulled in transitively
trace2/tr2_tls.h: remove unnecessary include
submodule-config.h: remove unnecessary include
pkt-line.h: remove unnecessary include
line-log.h: remove unnecessary include
http.h: remove unnecessary include
fsmonitor--daemon.h: remove unnecessary includes
blame.h: remove unnecessary includes
archive.h: remove unnecessary include
treewide: remove unnecessary includes in source files
treewide: remove unnecessary includes from header files
|
|
Each of these were checked with
gcc -E -I. ${SOURCE_FILE} | grep ${HEADER_FILE}
to ensure that removing the direct inclusion of the header actually
resulted in that header no longer being included at all (i.e. that
no other header pulled it in transitively).
...except for a few cases where we verified that although the header
was brought in transitively, nothing from it was directly used in
that source file. These cases were:
* builtin/credential-cache.c
* builtin/pull.c
* builtin/send-pack.c
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When parsing fsck.*, receive.fsck.*, or fetch.fsck.*, we don't check for
an implicit bool. So any of:
[fsck]
badTree
[receive "fsck"]
badTree
[fetch "fsck"]
badTree
will cause us to segfault. We can fix it with config_error_nonbool() in
the usual way, but we have to make a few more changes to get good error
messages. The problem is that all three spots do:
if (skip_prefix(var, "fsck.", &var))
to match and parse the actual message id. But that means that "var" now
just says "badTree" instead of "receive.fsck.badTree", making the
resulting message confusing. We can fix that by storing the parsed
message id in its own separate variable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In general, Git tries not to arbitrarily limit what it will store, and
there are currently no limits at all on the size of the path we find in
a tree. In theory you could have one that is gigabytes long.
But in practice this freedom is not really helping anybody, and is
potentially harmful:
1. Most operating systems have much lower limits for the size of a
single pathname component (e.g., on Linux you'll generally get
ENAMETOOLONG for anything over 255 bytes). And while you _can_ use
Git in a way that never touches the filesystem (manipulating the
index and trees directly), it's still probably not a good idea to
have gigantic tree names. Many operations load and traverse them,
so any clever Git-as-a-database scheme is likely to perform poorly
in that case.
2. We still have a lot of code which assumes strings are reasonably
sized, and I won't be at all surprised if you can trigger some
interesting integer overflows with gigantic pathnames. Stopping
malicious trees from entering the repository provides an extra line
of defense, protecting downstream code.
This patch implements an fsck check so that such trees can be rejected
by transfer.fsckObjects. I've picked a reasonably high maximum depth
here (4096) that hopefully should not bother anybody in practice. I've
also made it configurable, as an escape hatch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark-up unused parameters in the code so that we can eventually
enable -Wunused-parameter by default.
* jk/unused-parameter:
t/helper: mark unused callback void data parameters
tag: mark unused parameters in each_tag_name_fn callbacks
rev-parse: mark unused parameter in for_each_abbrev callback
replace: mark unused parameter in each_mergetag_fn callback
replace: mark unused parameter in ref callback
merge-tree: mark unused parameter in traverse callback
fsck: mark unused parameters in various fsck callbacks
revisions: drop unused "opt" parameter in "tweak" callbacks
count-objects: mark unused parameter in alternates callback
am: mark unused keep_cr parameters
http-push: mark unused parameter in xml callback
http: mark unused parameters in curl callbacks
do_for_each_ref_helper(): mark unused repository parameter
test-ref-store: drop unimplemented reflog-expire command
|
|
Further shuffling of declarations across header files to streamline
file dependencies.
* cw/compat-util-header-cleanup:
git-compat-util: move alloc macros to git-compat-util.h
treewide: remove unnecessary includes for wrapper.h
kwset: move translation table from ctype
sane-ctype.h: create header for sane-ctype macros
git-compat-util: move wrapper.c funcs to its header
git-compat-util: move strbuf.c funcs to its header
|
|
There are a few callback functions which are used with the fsck code,
but it's natural that not all callbacks need all parameters. For
reporting, even something as obvious as "the oid of the object which had
a problem" is not always used, as some callers are only checking a
single object in the first place. And for both reporting and walking,
things like void data pointers and the fsck_options aren't always
necessary.
But since each such parameter is used by _some_ callback, we have to
keep them in the interface. Mark the unused ones in specific callbacks
to avoid triggering -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reduce reliance on a global state in the config reading API.
* gc/config-context:
config: pass source to config_parser_event_fn_t
config: add kvi.path, use it to evaluate includes
config.c: remove config_reader from configsets
config: pass kvi to die_bad_number()
trace2: plumb config kvi
config.c: pass ctx with CLI config
config: pass ctx with config files
config.c: pass ctx in configsets
config: add ctx arg to config_fn_t
urlmatch.h: use config_fn_t type
config: inline git_color_default_config
|
|
alloc_nr, ALLOC_GROW, and ALLOC_GROW_BY are commonly used macros for
dynamic array allocation. Moving these macros to git-compat-util.h with
the other alloc macros focuses alloc.[ch] to allocation for Git objects
and additionally allows us to remove inclusions to alloc.h from files
that solely used the above macros.
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Pass config_context to config_callbacks when parsing config files. To
provide the .kvi member, refactor out the configset logic that caches
"struct config_source" and "enum config_scope" as a "struct
key_value_info". Make the "enum config_scope" available to the config
file machinery by plumbing an additional arg through
git_config_from_file_with_options().
We do not exercise ctx yet because the remaining current_config_*()
callers may be used with config_with_options(), which may read config
from parameters, but parameters don't pass ctx yet.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a new "const struct config_context *ctx" arg to config_fn_t to hold
additional information about the config iteration operation.
config_context has a "struct key_value_info kvi" member that holds
metadata about the config source being read (e.g. what kind of config
source it is, the filename, etc). In this series, we're only interested
in .kvi, so we could have just used "struct key_value_info" as an arg,
but config_context makes it possible to add/adjust members in the future
without changing the config_fn_t signature. We could also consider other
ways of organizing the args (e.g. moving the config name and value into
config_context or key_value_info), but in my experiments, the
incremental benefit doesn't justify the added complexity (e.g. a
config_fn_t will sometimes invoke another config_fn_t but with a
different config value).
In subsequent commits, the .kvi member will replace the global "struct
config_reader" in config.c, making config iteration a global-free
operation. It requires much more work for the machinery to provide
meaningful values of .kvi, so for now, merely change the signature and
call sites, pass NULL as a placeholder value, and don't rely on the arg
in any meaningful way.
Most of the changes are performed by
contrib/coccinelle/config_fn_ctx.pending.cocci, which, for every
config_fn_t:
- Modifies the signature to accept "const struct config_context *ctx"
- Passes "ctx" to any inner config_fn_t, if needed
- Adds UNUSED attributes to "ctx", if needed
Most config_fn_t instances are easily identified by seeing if they are
called by the various config functions. Most of the remaining ones are
manually named in the .cocci patch. Manual cleanups are still needed,
but the majority of it is trivial; it's either adjusting config_fn_t
that the .cocci patch didn't catch, or adding forward declarations of
"struct config_context ctx" to make the signatures make sense.
The non-trivial changes are in cases where we are invoking a config_fn_t
outside of config machinery, and we now need to decide what value of
"ctx" to pass. These cases are:
- trace2/tr2_cfg.c:tr2_cfg_set_fl()
This is indirectly called by git_config_set() so that the trace2
machinery can notice the new config values and update its settings
using the tr2 config parsing function, i.e. tr2_cfg_cb().
- builtin/checkout.c:checkout_main()
This calls git_xmerge_config() as a shorthand for parsing a CLI arg.
This might be worth refactoring away in the future, since
git_xmerge_config() can call git_default_config(), which can do much
more than just parsing.
Handle them by creating a KVI_INIT macro that initializes "struct
key_value_info" to a reasonable default, and use that to construct the
"ctx" arg.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The vast majority of files including object-store.h did not need dir.h
nor khash.h. Split the header into two files, and let most just depend
upon object-store-ll.h, while letting the two callers that need it
depend on the full object-store.h.
After this patch:
$ git grep -h include..object-store | sort | uniq -c
2 #include "object-store.h"
129 #include "object-store-ll.h"
Diff best viewed with `--color-moved`.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This also made it clear that several .c files that depended upon path.h
were missing a #include for it; add the missing includes while at it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
en/header-split-cache-h
* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
|
|
Apply the part of "the_repository.pending.cocci" pertaining to
"object-store.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Apply the part of "the_repository.pending.cocci" pertaining to
"commit.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Ever since a64215b6cd ("object.h: stop depending on cache.h; make
cache.h depend on object.h", 2023-02-24), we have a few headers that
could have replaced their include of cache.h with an include of
object.h. Make that change now.
Some C files had to start including cache.h after this change (or some
smaller header it had brought in), because the C files were depending
on things from cache.h but were only formerly implicitly getting
cache.h through one of these headers being modified in this patch.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This allows us to replace includes of cache.h with includes of the much
smaller alloc.h in many places. It does mean that we also need to add
includes of alloc.h in a number of C files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The fsck code operates on an object buffer represented as a pointer/len
combination. However, the parsing of commits and tags is a little bit
loose; we mostly scan left-to-right through the buffer, without checking
whether we've gone past the length we were given.
This has traditionally been OK because the buffers we feed to fsck
always have an extra NUL after the end of the object content, which ends
any left-to-right scan. That has always been true for objects we read
from the odb, and we made it true for incoming index-pack/unpack-objects
checks in a1e920a0a7 (index-pack: terminate object buffers with NUL,
2014-12-08).
However, we recently added an exception: hash-object asks index_fd() to
do fsck checks. That _may_ have an extra NUL (if we read from a pipe
into a strbuf), but it might not (if we read the contents from the
file). Nor can we just teach it to always add a NUL. We may mmap the
on-disk file, which will not have any extra bytes (if it's a multiple of
the page size). Not to mention that this is a rather subtle assumption
for the fsck code to make.
Instead, let's make sure that the fsck parsers don't ever look past the
size of the buffer they've been given. This _almost_ works already,
thanks to earlier work in 4d0d89755e (Make sure fsck_commit_buffer()
does not run out of the buffer, 2014-09-11). The theory there is that we
check up front whether we have the end of header double-newline
separator. And then any left-to-right scanning we do is OK as long as it
stops when it hits that boundary.
However, we later softened that in 84d18c0bcf (fsck: it is OK for a tag
and a commit to lack the body, 2015-06-28), which allows the
double-newline header to be missing, but does require that the header
ends in a newline. That was OK back then, because of the NUL-termination
guarantees (including the one from a1e920a0a7 mentioned above).
Because 84d18c0bcf guarantees that any header line does end in a
newline, we are still OK with most of the left-to-right scanning. We
only need to take care after completing a line, to check that there is
another line (and we didn't run out of buffer).
Most of these checks are just need to check "buffer < buffer_end" (where
buffer is advanced as we parse) before scanning for the next header
line. But here are a few notes:
- we don't technically need to check for remaining buffer before
parsing the very first line ("tree" for a commit, or "object" for a
tag), because verify_headers() rejects a totally empty buffer. But
we'll do so in the name of consistency and defensiveness.
- there are some calls to strchr('\n'). These are actually OK by the
"the final header line must end in a newline" guarantee from
verify_headers(). They will always find that rather than run off the
end of the buffer. Curiously, they do check for a NULL return and
complain, but I believe that condition can never be reached.
However, I converted them to use memchr() with a proper size and
retained the NULL checks. Using memchr() is not much longer and
makes it more obvious what is going on. Likewise, retaining the NULL
checks serves as a defensive measure in case my analysis is wrong.
- commit 9a1a3a4d4c (mktag: allow omitting the header/body \n
separator, 2021-01-05), does check for the end-of-buffer condition,
but does so with "!*buffer", relying explicitly on the NUL
termination. We can accomplish the same thing with a pointer
comparison. I also folded it into the follow-on conditional that
checks the contents of the buffer, for consistency with the other
checks.
- fsck_ident() uses parse_timestamp(), which is based on strtoumax().
That function will happily skip past leading whitespace, including
newlines, which makes it a risk. We can fix this by scanning to the
first digit ourselves, and then using parse_timestamp() to do the
actual numeric conversion.
Note that as a side effect this fixes the fact that we missed
zero-padded timestamps like "<email> 0123" (whereas we would
complain about "<email> 0123"). I doubt anybody cares, but I
mention it here for completeness.
- fsck_tree() does not need any modifications. It relies on
decode_tree_entry() to do the actual parsing, and that function
checks both that there are enough bytes in the buffer to represent
an entry, and that there is a NUL at the appropriate spot (one
hash-length from the end; this may not be the NUL for the entry we
are parsing, but we know that in the worst case, everything from our
current position to that NUL is a filename, so we won't run out of
bytes).
In addition to fixing the code itself, we'd like to make sure our rather
subtle assumptions are not violated in the future. So this patch does
two more things:
- add comments around verify_headers() documenting the link between
what it checks and the memory safety of the callers. I don't expect
this code to be modified frequently, but this may help somebody from
accidentally breaking things.
- add a thorough set of tests covering truncations at various key
spots (e.g., for a "tree $oid" line, in the middle of the word
"tree", right after it, after the space, in the middle of the $oid,
and right at the end of the line. Most of these are fine already (it
is only truncating right at the end of the line that is currently
broken). And some of them are not even possible with the current
code (we parse "tree " as a unit, so truncating before the space is
equivalent). But I aimed here to consider the code a black box and
look for any truncations that would be a problem for a left-to-right
parser.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The fsck code has been slowly moving away from requiring an object
struct in commits like 103fb6d43b (fsck: accept an oid instead of a
"struct tag" for fsck_tag(), 2019-10-18), c5b4269b57 (fsck: accept an
oid instead of a "struct commit" for fsck_commit(), 2019-10-18), etc.
However, the only external interface that fsck.c provides is
fsck_object(), which requires an object struct, then promptly discards
everything except its oid and type. Let's factor out the post-discard
part of that function as fsck_buffer(), leaving fsck_object() as a thin
wrapper around it. That will provide more flexibility for callers which
may not have a struct.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Recently, a vulnerability was reported that can lead to an out-of-bounds
write when reading an unreasonably large gitattributes file. The root
cause of this error are multiple integer overflows in different parts of
the code when there are either too many lines, when paths are too long,
when attribute names are too long, or when there are too many attributes
declared for a pattern.
As all of these are related to size, it seems reasonable to restrict the
size of the gitattributes file via git-fsck(1). This allows us to both
stop distributing known-vulnerable objects via common hosting platforms
that have fsck enabled, and users to protect themselves by enabling the
`fetch.fsckObjects` config.
There are basically two checks:
1. We verify that size of the gitattributes file is smaller than
100MB.
2. We verify that the maximum line length does not exceed 2048
bytes.
With the preceding commits, both of these conditions would cause us to
either ignore the complete gitattributes file or blob in the first case,
or the specific line in the second case. Now with these consistency
checks added, we also grow the ability to stop distributing such files
in the first place when `receive.fsckObjects` is enabled.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the checks for gitattributes so that they can be extended more
readily.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In `fsck_finish()` we check all blobs for consistency that we have found
during the tree walk, but that haven't yet been checked. This is only
required for gitmodules right now, but will also be required for a new
check for gitattributes.
Pull out a function `fsck_blobs()` that allows the caller to check a set
of blobs for consistency.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In general, we don't need to validate blob contents as they are opaque
blobs about whose content Git doesn't need to care about. There are some
exceptions though when blobs are linked into trees so that they would be
interpreted by Git. We only have a single such check right now though,
which is the one for gitmodules that has been added in the context of
CVE-2018-11235.
Now we have found another vulnerability with gitattributes that can lead
to out-of-bounds writes and reads. So let's refactor `fsck_blob()` so
that it is more extensible and can check different types of blobs.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We use the normal tree_desc code to iterate over trees in fsck, meaning
we only see the canonicalized modes it returns. And hence we'd never see
anything unexpected, since it will coerce literally any garbage into one
of our normal and accepted modes.
We can use the new RAW_MODES flag to see the real modes, and then use
the existing code to actually analyze them. The existing code is written
as allow-known-good, so there's not much point in testing a variety of
breakages. The one tested here should be S_IFREG but with nonsense
permissions.
Do note that the error-reporting here isn't great. We don't mention the
specific bad mode, but just that the tree has one or more broken modes.
But when you go to look at it with "git ls-tree", we'll report the
canonicalized mode! This isn't ideal, but given that this should come up
rarely, and that any number of other tree corruptions might force you
into looking at the binary bytes via "cat-file", it's not the end of the
world. And it's something we can improve on top later if we choose.
Reported-by: Xavier Morel <xavier.morel@masklinn.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When using init_tree_desc() and tree_entry() to iterate over a tree, we
always canonicalize the modes coming out of the tree. This is a good
thing to prevent bugs or oddities in normal code paths, but it's
counter-productive for tools like fsck that want to see the exact
contents.
We can address this by adding an option to avoid the extra
canonicalization. A few notes on the implementation:
- I've attached the new option to the tree_desc struct itself. The
actual code change is in decode_tree_entry(), which is in turn
called by the public update_tree_entry(), tree_entry(), and
init_tree_desc() functions, plus their "gently" counterparts.
By letting it ride along in the struct, we can avoid changing the
signature of those functions, which are called many times. Plus it's
conceptually simpler: you really want a particular iteration of a
tree to be "raw" or not, rather than individual calls.
- We still have to set the new option somewhere. The struct is
initialized by init_tree_desc(). I added the new flags field only to
the "gently" version. That avoids disturbing the much more numerous
non-gentle callers, and it makes sense that anybody being careful
about looking at raw modes would also be careful about bogus trees
(i.e., the caller will be something like fsck in the first place).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a path_match_flags() function and have the two sets of
starts_with_dot_{,dot_}slash() functions added in
63e95beb085 (submodule: port resolve_relative_url from shell to C,
2016-04-15) and a2b26ffb1a8 (fsck: convert gitmodules url to URL
passed to curl, 2020-04-18) be thin wrappers for it.
As the latter of those notes the fsck version was copied from the
initial builtin/submodule--helper.c version.
Since the code added in a2b26ffb1a8 was doing really doing the same as
win32_is_dir_sep() added in 1cadad6f658 (git clone <url>
C:\cygwin\home\USER\repo' is working (again), 2018-12-15) let's move
the latter to git-compat-util.h is a is_xplatform_dir_sep(). We can
then call either it or the platform-specific is_dir_sep() from this
new function.
Let's likewise change code in various other places that was hardcoding
checks for "'/' || '\\'" with the new is_xplatform_dir_sep(). As can
be seen in those callers some of them still concern themselves with
':' (Mac OS classic?), but let's leave the question of whether that
should be consolidated for some other time.
As we expect to make wider use of the "native" case in the future,
define and use two starts_with_dot_{,dot_}slash_native() convenience
wrappers. This makes the diff in builtin/submodule--helper.c much
smaller.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the commits merged in via 204333b015 (Merge branch
'jk/open-dotgitx-with-nofollow', 2021-03-22), we stopped following
symbolic links for .gitattributes, .gitignore, and .mailmap files.
Let's teach fsck to warn that these symlinks are not going to do
anything. Note that this is just a warning, and won't block the objects
via transfer.fsckObjects, since there are reported to be cases of this
in the wild (and even once fixed, they will continue to exist in the
commit history of those projects, but are not particularly dangerous).
Note that we won't add these to the existing gitmodules block in the
fsck code. The logic for gitmodules is a bit more complicated, as we
also check the content of non-symlink instances we find. But for these
new files, there is no content check; we're just looking at the name and
mode of the tree entry (and we can avoid even the complicated name
checks in the common case that the mode doesn't indicate a symlink).
We can reuse the test helper function we defined for .gitmodules, though
(it needs some slight adjustments for the fsck error code, and because
we don't block these symlinks via verify_path()).
Note that I didn't explicitly test the transfer.fsckObjects case here
(nor does the existing .gitmodules test that it blocks a push). The
translation of fsck severities to outcomes is covered in general in
t5504.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many calls to report() in fsck_tree() are kept on a single line and are
quite long. Most were pretty big to begin with, but have gotten even
longer over the years as we've added more parameters. Let's accept the
churn of wrapping them in order to conform to our usual line limits.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit b2f2039c2b (fsck: accept an oid instead of a "struct tree" for
fsck_tree(), 2019-10-18) introduced a new "oid" parameter to
fsck_tree(), and we pass it to the report() function when we find
problems. However, that is shadowed within the tree-walking loop by the
existing "oid" variable which we use to store the oid of each tree
entry. As a result, we may report the wrong oid for some problems we
detect within the loop (the entry oid, instead of the tree oid).
Our tests didn't catch this because they checked only that we found the
expected fsck problem, not that it was attached to the correct object.
Let's rename both variables in the function to avoid confusion. This
makes the diff a little noisy (e.g., all of the report() calls outside
the loop were already correct but need to be touched), but makes sure we
catch all cases and will avoid similar confusion in the future.
And we can update the test to be a bit more specific and catch this
problem.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Refactor the check added in 5476e1efde (fetch-pack: print and use
dangling .gitmodules, 2021-02-22) to make use of us now passing the
"msg_id" to the user defined "error_func". We can now compare against
the FSCK_MSG_GITMODULES_MISSING instead of parsing the generated
message.
Let's also replace register_found_gitmodules() with directly
manipulating the "gitmodules_found" member. A recent commit moved it
into "fsck_options" so we could do this here.
I'm sticking this callback in fsck.c. Perhaps in the future we'd like
to accumulate such callbacks into another file (maybe fsck-cb.c,
similar to parse-options-cb.c?), but while we've got just the one
let's just put it into fsck.c.
A better alternative in this case would be some library some more
obvious library shared by fetch-pack.c ad builtin/index-pack.c, but
there isn't such a thing.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the gitmodules_{found,done} static variables added in
159e7b080bf (fsck: detect gitmodules files, 2018-05-02) into the
fsck_options struct. It makes sense to keep all the context in the
same place.
This requires changing the recently added register_found_gitmodules()
function added in 5476e1efde (fetch-pack: print and use dangling
.gitmodules, 2021-02-22) to take fsck_options. That function will be
removed in a subsequent commit, but as it'll require the new
gitmodules_found attribute of "fsck_options" we need this intermediate
step first.
An earlier version of this patch removed the small amount of
duplication we now have between FSCK_OPTIONS_{DEFAULT,STRICT} with a
FSCK_OPTIONS_COMMON macro. I don't think such de-duplication is worth
it for this amount of copy/pasting.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change code I added in acf9de4c94e (mktag: use fsck instead of custom
verify_tag(), 2021-01-05) to make use of a new API function that takes
the fsck_msg_{id,type} types, instead of arbitrary strings that
we'll (hopefully) parse into those types.
At the time that the fsck_set_msg_type() API was introduced in
0282f4dced0 (fsck: offer a function to demote fsck errors to warnings,
2015-06-22) it was only intended to be used to parse user-supplied
data.
For things that are purely internal to the C code it makes sense to
have the compiler check these arguments, and to skip the sanity
checking of the data in fsck_set_msg_type() which is redundant to
checks we get from the compiler.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the fsck_error callback to also pass along the
fsck_msg_id. Before this change the only way to get the message id was
to parse it back out of the "message".
Let's pass it down explicitly for the benefit of callers that might
want to use it, as discussed in [1].
Passing the msg_type is now redundant, as you can always get it back
from the msg_id, but I'm not changing that convention. It's really
common to need the msg_type, and the report() function itself (which
calls "fsck_error") needs to call fsck_msg_type() to discover
it. Let's not needlessly re-do that work in the user callback.
1. https://lore.kernel.org/git/87blcja2ha.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the FOREACH_FSCK_MSG_ID macro and the fsck_msg_id enum it helps
define from fsck.c to fsck.h. This is in preparation for having
non-static functions take the fsck_msg_id as an argument.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename the FOREACH_MSG_ID macro to FOREACH_FSCK_MSG_ID in preparation
for moving it over to fsck.h. It's good convention to name macros
in *.h files in such a way as to clearly not clash with any other
names in other files.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In f417eed8cde (fsck: provide a function to parse fsck message IDs,
2015-06-22) the "STR" macro was introduced, but that short macro name
was not undefined after use as was done earlier in the same series for
the MSG_ID macro in c99ba492f1c (fsck: introduce identifiers for fsck
messages, 2015-06-22).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There's no reason to defer the calling of parse_msg_type() until after
we've checked if the "id < 0". This is not a hot codepath, and
parse_msg_type() itself may die on invalid input.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the FSCK_{FATAL,INFO,ERROR,WARN,IGNORE} defines into a new
fsck_msg_type enum.
These defines were originally introduced in:
- ba002f3b28a (builtin-fsck: move common object checking code to
fsck.c, 2008-02-25)
- f50c4407305 (fsck: disallow demoting grave fsck errors to warnings,
2015-06-22)
- efaba7cc77f (fsck: optionally ignore specific fsck issues
completely, 2015-06-22)
- f27d05b1704 (fsck: allow upgrading fsck warnings to errors,
2015-06-22)
The reason these were defined in two different places is because we
use FSCK_{IGNORE,INFO,FATAL} only in fsck.c, but FSCK_{ERROR,WARN} are
used by external callbacks.
Untangling that would take some more work, since we expose the new
"enum fsck_msg_type" to both. Similar to "enum object_type" it's not
worth structuring the API in such a way that only those who need
FSCK_{ERROR,WARN} pass around a different type.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Refactor "if options->msg_type" and other code added in
0282f4dced0 (fsck: offer a function to demote fsck errors to warnings,
2015-06-22) to reduce the scope of the "int msg_type" variable.
This is in preparation for changing its type in a subsequent commit,
only using it in the "!options->msg_type" scope makes that change
This also brings the code in line with the fsck_set_msg_type()
function (also added in 0282f4dced0), which does a similar check for
"!options->msg_type". Another minor benefit is getting rid of the
style violation of not having braces for the body of the "if".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename the remaining variables of type fsck_msg_id from "id" to
"msg_id". This change is relatively small, and is worth the churn for
a later change where we have different id's in the "report" function.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the append_msg_id() function in favor of calling
prepare_msg_ids(). We already have code to compute the camel-cased
msg_id strings in msg_id_info, let's use it.
When the append_msg_id() function was added in 71ab8fa840f (fsck:
report the ID of the error/warning, 2015-06-22) the prepare_msg_ids()
function didn't exist. When prepare_msg_ids() was added in
a46baac61eb (fsck: factor out msg_id_info[] lazy initialization code,
2018-05-26) this code wasn't moved over to lazy initialization.
This changes the behavior of the code to initialize all the messages
instead of just camel-casing the one we need on the fly. Since the
common case is that we're printing just one message this is mostly
redundant work.
But that's OK in this case, reporting this fsck issue to the user
isn't performance-sensitive. If we were somehow doing so in a tight
loop (in a hopelessly broken repository?) this would help, since we'd
save ourselves from re-doing this work for identical messages, we
could just grab the prepared string from msg_id_info after the first
invocation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename variables in a function added in 0282f4dced0 (fsck: offer a
function to demote fsck errors to warnings, 2015-06-22).
It was needlessly confusing that it took a "msg_type" argument, but
then later declared another "msg_type" of a different type.
Let's rename that to "severity", and rename "id" to "msg_id" and
"msg_id" to "msg_id_str" etc. This will make a follow-up change
smaller.
While I'm at it properly indent the fsck_set_msg_type() argument list.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Refactor code I recently changed in 1f3299fda9 (fsck: make
fsck_config() re-usable, 2021-01-05) so that I could use fsck's config
callback in mktag in 1f3299fda9 (fsck: make fsck_config() re-usable,
2021-01-05).
I don't know what I was thinking in structuring the code this way, but
it clearly makes no sense to have an fsck_config_internal() at all
just so it can get a fsck_options when git_config() already supports
passing along some void* data.
Let's just make use of that instead, which gets us rid of the two
wrapper functions, and brings fsck's common config callback in line
with other such reusable config callbacks.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The approach to "fsck" the incoming objects in "index-pack" is
attractive for performance reasons (we have them already in core,
inflated and ready to be inspected), but fundamentally cannot be
applied fully when we receive more than one pack stream, as a tree
object in one pack may refer to a blob object in another pack as
".gitmodules", when we want to inspect blobs that are used as
".gitmodules" file, for example. Teach "index-pack" to emit
objects that must be inspected later and check them in the calling
"fetch-pack" process.
* jt/transfer-fsck-across-packs:
fetch-pack: print and use dangling .gitmodules
fetch-pack: with packfile URIs, use index-pack arg
http-fetch: allow custom index-pack args
http: allow custom index-pack args
|
|
Teach index-pack to print dangling .gitmodules links after its "keep" or
"pack" line instead of declaring an error, and teach fetch-pack to check
such lines printed.
This allows the tree side of the .gitmodules link to be in one packfile
and the blob side to be in another without failing the fsck check,
because it is now fetch-pack which checks such objects after all
packfiles have been downloaded and indexed (and not index-pack on an
individual packfile, as it is before this commit).
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
