| Age | Commit message (Collapse) | Author |
|---|
|
Each of these were checked with
gcc -E -I. ${SOURCE_FILE} | grep ${HEADER_FILE}
to ensure that removing the direct inclusion of the header actually
resulted in that header no longer being included at all (i.e. that
no other header pulled it in transitively).
...except for a few cases where we verified that although the header
was brought in transitively, nothing from it was directly used in
that source file. These cases were:
* builtin/credential-cache.c
* builtin/pull.c
* builtin/send-pack.c
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As the code is written today index_bulk_checkin only accepts blobs.
Remove the enum object_type parameter and rename index_bulk_checkin to
index_blob_bulk_checkin, index_stream to index_blob_stream,
deflate_to_pack to deflate_blob_to_pack, stream_to_pack to
stream_blob_to_pack, to make this explicit.
Not supporting commits, tags, or trees has no downside as it is not
currently supported now, and commits, tags, and trees being smaller by
design do not have the problem that the problem that index_bulk_checkin
was built to solve.
Before we start adding code to support the hash function transition
supporting additional objects types in index_bulk_checkin has no real
additional cost, just an extra function parameter to know what the
object type is. Once we begin the hash function transition this is not
the case.
The hash function transition document specifies that a repository with
compatObjectFormat enabled will compute and store both the SHA-1 and
SHA-256 hash of every object in the repository.
What makes this a challenge is that it is not just an additional hash
over the same object. Instead the hash function transition document
specifies that the compatibility hash (specified with
compatObjectFormat) be computed over the equivalent object that another
git repository whose storage hash (specified with objectFormat) would
store. When comparing equivalent repositories built with different
storage hash functions, the oids embedded in objects used to refer to
other objects differ and the location of signatures within objects
differ.
As blob objects have neither oids referring to other objects nor stored
signatures their storage hash and their compatibility hash are computed
over the same object.
The other kinds of objects: trees, commits, and tags, all store oids
referring to other objects. Signatures are stored in commit and tag
objects. As oids and the tags to store signatures are not the same size
in repositories built with different storage hashes the size of the
equivalent objects are also different.
A version of index_bulk_checkin that supports more than just blobs when
computing both the SHA-1 and the SHA-256 of every object added would
need a different, and more expensive structure. The structure is more
expensive because it would be required to temporarily buffering the
equivalent object the compatibility hash needs to be computed over.
A temporary object is needed, because before a hash over an object can
computed it's object header needs to be computed. One of the members of
the object header is the entire size of the object. To know the size of
an equivalent object an entire pass over the original object needs to be
made, as trees, commits, and tags are composed of a variable number of
variable sized pieces. Unfortunately there is no formula to compute the
size of an equivalent object from just the size of the original object.
Avoid all of those future complications by limiting index_bulk_checkin
to only work on blobs.
Inspired-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark-up unused parameters in the code so that we can eventually
enable -Wunused-parameter by default.
* jk/unused-parameter:
t/helper: mark unused callback void data parameters
tag: mark unused parameters in each_tag_name_fn callbacks
rev-parse: mark unused parameter in for_each_abbrev callback
replace: mark unused parameter in each_mergetag_fn callback
replace: mark unused parameter in ref callback
merge-tree: mark unused parameter in traverse callback
fsck: mark unused parameters in various fsck callbacks
revisions: drop unused "opt" parameter in "tweak" callbacks
count-objects: mark unused parameter in alternates callback
am: mark unused keep_cr parameters
http-push: mark unused parameter in xml callback
http: mark unused parameters in curl callbacks
do_for_each_ref_helper(): mark unused repository parameter
test-ref-store: drop unimplemented reflog-expire command
|
|
There are a few callback functions which are used with the fsck code,
but it's natural that not all callbacks need all parameters. For
reporting, even something as obvious as "the oid of the object which had
a problem" is not always used, as some callers are only checking a
single object in the first place. And for both reporting and walking,
things like void data pointers and the fsck_options aren't always
necessary.
But since each such parameter is used by _some_ callback, we have to
keep them in the interface. Mark the unused ones in specific callbacks
to avoid triggering -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
alloc_nr, ALLOC_GROW, and ALLOC_GROW_BY are commonly used macros for
dynamic array allocation. Moving these macros to git-compat-util.h with
the other alloc macros focuses alloc.[ch] to allocation for Git objects
and additionally allows us to remove inclusions to alloc.h from files
that solely used the above macros.
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This also made it clear that several .c files that depended upon path.h
were missing a #include for it; add the missing includes while at it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
More header clean-up.
* en/header-split-cache-h-part-2: (22 commits)
reftable: ensure git-compat-util.h is the first (indirect) include
diff.h: reduce unnecessary includes
object-store.h: reduce unnecessary includes
commit.h: reduce unnecessary includes
fsmonitor: reduce includes of cache.h
cache.h: remove unnecessary headers
treewide: remove cache.h inclusion due to previous changes
cache,tree: move basic name compare functions from read-cache to tree
cache,tree: move cmp_cache_name_compare from tree.[ch] to read-cache.c
hash-ll.h: split out of hash.h to remove dependency on repository.h
tree-diff.c: move S_DIFFTREE_IFXMIN_NEQ define from cache.h
dir.h: move DTYPE defines from cache.h
versioncmp.h: move declarations for versioncmp.c functions from cache.h
ws.h: move declarations for ws.c functions from cache.h
match-trees.h: move declarations for match-trees.c functions from cache.h
pkt-line.h: move declarations for pkt-line.c functions from cache.h
base85.h: move declarations for base85.c functions from cache.h
copy.h: move declarations for copy.c functions from cache.h
server-info.h: move declarations for server-info.c functions from cache.h
packfile.h: move pack_window and pack_entry from cache.h
...
|
|
Geometric repacking ("git repack --geometric=<n>") in a repository
that borrows from an alternate object database had various corner
case bugs, which have been corrected.
* ps/fix-geom-repack-with-alternates:
repack: disable writing bitmaps when doing a local repack
repack: honor `-l` when calculating pack geometry
t/helper: allow chmtime to print verbosely without modifying mtime
pack-objects: extend test coverage of `--stdin-packs` with alternates
pack-objects: fix error when same packfile is included and excluded
pack-objects: fix error when packing same pack twice
pack-objects: split out `--stdin-packs` tests into separate file
repack: fix generating multi-pack-index with only non-local packs
repack: fix trying to use preferred pack in alternates
midx: fix segfault with no packs and invalid preferred pack
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to write a bitmap, we need to have full coverage of all objects
that are about to be packed. In the traditional non-multi-pack-index
world this meant we need to do a full repack of all objects into a
single packfile. But in the new multi-pack-index world we can get away
with writing bitmaps when we have multiple packfiles as long as the
multi-pack-index covers all objects.
This is not always the case though. When asked to perform a repack of
local objects, only, then we cannot guarantee to have full coverage of
all objects regardless of whether we do a full repack or a repack with a
multi-pack-index. The end result is that writing the bitmap will fail in
both worlds:
$ git multi-pack-index write --stdin-packs --bitmap <packfiles
warning: Failed to write bitmap index. Packfile doesn't have full closure (object 1529341d78cf45377407369acb0f4ff2b5cdae42 is missing)
error: could not write multi-pack bitmap
Now there are two different ways to fix this. The first one would be to
amend git-multi-pack-index(1) to disable writing bitmaps when we notice
that we don't have full object coverage.
- We don't have enough information in git-multi-pack-index(1) in
order to tell whether the local repository _should_ have full
coverage. Because even when connected to an alternate object
directory, it may be the case that we still have all objects
around in the main object database.
- git-multi-pack-index(1) is quite a low-level tool. Automatically
disabling functionality that it was asked to provide does not feel
like the right thing to do.
We can easily fix it at a higher level in git-repack(1) though. When
asked to only include local objects via `-l` and when connected to an
alternate object directory then we will override the user's ask and
disable writing bitmaps with a warning. This is similar to what we do in
git-pack-objects(1), where we also disable writing bitmaps in case we
omit an object from the pack.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
en/header-split-cache-h
* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
|
|
In preceding commits we changed many calls to macros that were
providing a "the_repository" argument to invoke corresponding repo_*()
function instead. Let's follow-up and adjust references to those in
comments, which coccinelle didn't (and inherently can't) catch.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Apply the part of "the_repository.pending.cocci" pertaining to
"object-store.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With the change in the last commit to move several functions to
write-or-die.h, csum-file.h no longer needs to include cache.h.
However, removing that include forces several other C files, which
directly or indirectly dependend upon csum-file.h's inclusion of
cache.h, to now be more explicit about their dependencies.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is another step towards letting us remove the include of cache.h in
strbuf.c. It does mean that we also need to add includes of abspath.h
in a number of C files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
More work towards -Wunused.
* jk/unused-post-2.39-part2: (21 commits)
help: mark unused parameter in git_unknown_cmd_config()
run_processes_parallel: mark unused callback parameters
userformat_want_item(): mark unused parameter
for_each_commit_graft(): mark unused callback parameter
rewrite_parents(): mark unused callback parameter
fetch-pack: mark unused parameter in callback function
notes: mark unused callback parameters
prio-queue: mark unused parameters in comparison functions
for_each_object: mark unused callback parameters
list-objects: mark unused callback parameters
mark unused parameters in signal handlers
run-command: mark error routine parameters as unused
mark "pointless" data pointers in callbacks
ref-filter: mark unused callback parameters
http-backend: mark unused parameters in virtual functions
http-backend: mark argc/argv unused
object-name: mark unused parameters in disambiguate callbacks
serve: mark unused parameters in virtual functions
serve: use repository pointer to get config
ls-refs: drop config caching
...
|
|
The for_each_{loose,packed}_object interface uses callback functions,
but not every callback needs all of the parameters. Mark the unused ones
to satisfy -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This allows us to replace includes of cache.h with includes of the much
smaller alloc.h in many places. It does mean that we also need to add
includes of alloc.h in a number of C files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git hash-object" now checks that the resulting object is well
formed with the same code as "git fsck".
* jk/hash-object-fsck:
fsck: do not assume NUL-termination of buffers
hash-object: use fsck for object checks
fsck: provide a function to fsck buffer without object struct
t: use hash-object --literally when created malformed objects
t7030: stop using invalid tag name
t1006: stop using 0-padded timestamps
t1007: modernize malformed object tests
|
|
Since c879daa237 (Make hash-object more robust against malformed
objects, 2011-02-05), we've done some rudimentary checks against objects
we're about to write by running them through our usual parsers for
trees, commits, and tags.
These parsers catch some problems, but they are not nearly as careful as
the fsck functions (which make sense; the parsers are designed to be
fast and forgiving, bailing only when the input is unintelligible). We
are better off doing the more thorough fsck checks when writing objects.
Doing so at write time is much better than writing garbage only to find
out later (after building more history atop it!) that fsck complains
about it, or hosts with transfer.fsckObjects reject it.
This is obviously going to be a user-visible behavior change, and the
test changes earlier in this series show the scope of the impact. But
I'd argue that this is OK:
- the documentation for hash-object is already vague about which
checks we might do, saying that --literally will allow "any
garbage[...] which might not otherwise pass standard object parsing
or git-fsck checks". So we are already covered under the documented
behavior.
- users don't generally run hash-object anyway. There are a lot of
spots in the tests that needed to be updated because creating
garbage objects is something that Git's tests disproportionately do.
- it's hard to imagine anyone thinking the new behavior is worse. Any
object we reject would be a potential problem down the road for the
user. And if they really want to create garbage, --literally is
already the escape hatch they need.
Note that the change here is actually in index_mem(), which handles the
HASH_FORMAT_CHECK flag passed by hash-object. That flag is also used by
"git-replace --edit" to sanity-check the result. Covering that with more
thorough checks likewise seems like a good thing.
Besides being more thorough, there are a few other bonuses:
- we get rid of some questionable stack allocations of object structs.
These don't seem to currently cause any problems in practice, but
they subtly violate some of the assumptions made by the rest of the
code (e.g., the "struct commit" we put on the stack and
zero-initialize will not have a proper index from
alloc_comit_index().
- likewise, those parsed object structs are the source of some small
memory leaks
- the resulting messages are much better. For example:
[before]
$ echo 'tree 123' | git hash-object -t commit --stdin
error: bogus commit object 0000000000000000000000000000000000000000
fatal: corrupt commit
[after]
$ echo 'tree 123' | git.compile hash-object -t commit --stdin
error: object fails fsck: badTreeSha1: invalid 'tree' line format - bad sha1
fatal: refusing to create malformed object
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit b25562e63f (object-file: inline calls to read_object(),
2023-01-07) accidentally indented a conditional block with spaces
instead of a tab.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The only caller of read_object_file_extended() is the thin wrapper of
repo_read_object_file(). Instead of wrapping, let's just rename the
inner function and let people call it directly. This cleans up the
namespace and reduces confusion.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our sole caller always passes in "1", so we can just drop the parameter
entirely. Anybody who doesn't want this behavior could easily call
oid_object_info_extended() themselves, as we're just a thin wrapper
around it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since read_object() is these days just a thin wrapper around
oid_object_info_extended(), and since it only has two callers, let's
just inline those calls. This has a few positive outcomes:
- it's a net reduction in source code lines
- even though the callers end up with a few extra lines, they're now
more flexible and can use object_info flags directly. So no more
need to convert die_if_corrupt between parameter/flag, and we can
ask for lookup replacement with a flag rather than doing it
ourselves.
- there's one fewer function in an already crowded namespace (e.g.,
the difference between read_object() and read_object_file() was not
immediately obvious; now we only have one of them).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Even in a repository with promisor remote, it is useless to
attempt to lazily attempt fetching an object that is expected to be
commit, because no "filter" mode omits commit objects. Take
advantage of this assumption to fail fast on errors.
* jt/avoid-lazy-fetch-commits:
commit: don't lazy-fetch commits
object-file: emit corruption errors when detected
object-file: refactor map_loose_object_1()
object-file: remove OBJECT_INFO_IGNORE_LOOSE
|
|
Instead of relying on errno being preserved across function calls, teach
do_oid_object_info_extended() to itself report object corruption when
it first detects it. There are 3 types of corruption being detected:
- when a replacement object is missing
- when a loose object is corrupt
- when a packed object is corrupt and the object cannot be read
in another way
Note that in the RHS of this patch's diff, a check for ENOENT that was
introduced in 3ba7a06552 (A loose object is not corrupt if it cannot
be read due to EMFILE, 2010-10-28) is also removed. The purpose of this
check is to avoid a false report of corruption if the errno contains
something like EMFILE (or anything that is not ENOENT), in which case
a more generic report is presented. Because, as of this patch, we no
longer rely on such a heuristic to determine corruption, but surface
the error message at the point when we read something that we did not
expect, this check is no longer necessary.
Besides being more resilient, this also prepares for a future patch in
which an indirect caller of do_oid_object_info_extended() will need
such functionality.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This function can do 3 things:
1. Gets an fd given a path
2. Simultaneously gets a path and fd given an OID
3. Memory maps an fd
Keep 3 (renaming the function accordingly) and inline 1 and 2 into their
respective callers.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Its last user was removed in 97b2fa08b6 (fetch-pack: drop
custom loose object cache, 2018-11-12), so we can remove it.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
write_buffer() reports the OS error if it is unable to write. Its only
caller dies in that case, giving some more context in its last message.
Inline this function and show only a single error message that includes
both the context (writing a loose object file) and the OS error. This
shortens the code and simplifies the output.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When adding an alternate ODB, we check if the alternate has the same
path as the object dir, and if so, we do nothing. However, that
comparison does not resolve symlinks. This makes it possible to add the
object dir as an alternate, which may result in bad behavior. For
example, it can trick "git repack -a -l -d" (possibly run by "git gc")
into thinking that all packs come from an alternate and delete all
objects.
rm -rf test &&
git clone https://github.com/git/git test &&
(
cd test &&
ln -s objects .git/alt-objects &&
# -c repack.updateserverinfo=false silences a warning about not
# being able to update "info/refs", it isn't needed to show the
# bad behavior
GIT_ALTERNATE_OBJECT_DIRECTORIES=".git/alt-objects" git \
-c repack.updateserverinfo=false repack -a -l -d &&
# It's broken!
git status
# Because there are no more objects!
ls .git/objects/pack
)
Fix this by resolving symlinks and relative paths before comparing the
alternate and object dir. This lets us clean up a number of issues noted
in 37a95862c6 (alternates: re-allow relative paths from environment,
2016-11-07):
- Now that we compare the real paths, duplicate detection is no longer
foiled by relative paths.
- Using strbuf_realpath() allows us to "normalize" paths that
strbuf_normalize_path() can't, so we can stop silently ignoring errors
when "normalizing" paths from the environment.
- We now store an absolute path based on getcwd() (the "future
direction" named in 37a95862c6), so chdir()-ing in the process no
longer changes the directory pointed to by the alternate. This is a
change in behavior, but a desirable one.
Signed-off-by: Glen Choo <chooglen@google.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
More UNUSED annotation to help using -Wunused option with the
compiler.
* jk/unused-anno-more:
ll-merge: mark unused parameters in callbacks
diffcore-pickaxe: mark unused parameters in pickaxe functions
convert: mark unused parameter in null stream filter
apply: mark unused parameters in noop error/warning routine
apply: mark unused parameters in handlers
date: mark unused parameters in handler functions
string-list: mark unused callback parameters
object-file: mark unused parameters in hash_unknown functions
mark unused parameters in trivial compat functions
update-index: drop unused argc from do_reupdate()
submodule--helper: drop unused argc from module_list_compute()
diffstat_consume(): assert non-zero length
|
|
The 0'th entry of our hash_algos array fills out the virtual methods
with a series of functions which simply BUG(). This is the right thing
to do, since the point is to catch use of an invalid algo parameter, but
we need to annotate them to appease -Wunused-parameters.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove error detection from a function that fetches from promisor
remotes, and make it die when such a fetch fails to bring all the
requested objects, to give an early failure to various operations.
* jt/promisor-remote-fetch-tweak:
promisor-remote: die upon failing fetch
promisor-remote: remove a return value
|
|
In a partial clone, an attempt to read a missing object results in an
attempt to fetch that single object. In order to avoid multiple
sequential fetches, which would occur when multiple objects are missing
(which is the typical case), some commands have been taught to prefetch
in a batch: such a command would, in a partial clone, notice that
several objects that it will eventually need are missing, and call
promisor_remote_get_direct() with all such objects at once.
When this batch prefetch fails, these commands fall back to the
sequential fetches. But at $DAYJOB we have noticed that this results in
a bad user experience: a command would take unexpectedly long to finish
(and possibly use up a lot of bandwidth) if the batch prefetch would
fail for some intermittent reason, but all subsequent fetches would
work. It would be a better user experience for such a command would
just fail.
Therefore, make it a fatal error if the prefetch fails and at least one
object being fetched is known to be a promisor object. (The latter
criterion is to make sure that we are not misleading the user that such
an object would be present from the promisor remote. For example, a
missing object may be a result of repository corruption and not because
it is expectedly missing due to the repository being a partial clone.)
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow large objects read from a packstream to be streamed into a
loose object file straight, without having to keep it in-core as a
whole.
* hx/unpack-streaming:
unpack-objects: use stream_loose_object() to unpack large objects
core doc: modernize core.bigFileThreshold documentation
object-file.c: add "stream_loose_object()" to handle large object
object-file.c: factor out deflate part of write_loose_object()
object-file.c: refactor write_loose_object() to several steps
unpack-objects: low memory footprint for get_data() in dry_run mode
|
|
If we want unpack and write a loose object using "write_loose_object",
we have to feed it with a buffer with the same size of the object, which
will consume lots of memory and may cause OOM. This can be improved by
feeding data to "stream_loose_object()" in a stream.
Add a new function "stream_loose_object()", which is a stream version of
"write_loose_object()" but with a low memory footprint. We will use this
function to unpack large blob object in later commit.
Another difference with "write_loose_object()" is that we have no chance
to run "write_object_file_prepare()" to calculate the oid in advance.
In "write_loose_object()", we know the oid and we can write the
temporary file in the same directory as the final object, but for an
object with an undetermined oid, we don't know the exact directory for
the object.
Still, we need to save the temporary file we're preparing
somewhere. We'll do that in the top-level ".git/objects/"
directory (or whatever "GIT_OBJECT_DIRECTORY" is set to). Once we've
streamed it we'll know the OID, and will move it to its canonical
path.
"freshen_packed_object()" or "freshen_loose_object()" will be called
inside "stream_loose_object()" after obtaining the "oid". After the
temporary file is written, we wants to mark the object to recent and we
may find that where indeed is already the object. We should remove the
temporary and do not leave a new copy of the object.
Helped-by: René Scharfe <l.s.r@web.de>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Han Xin <chiyutianyi@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Split out the part of write_loose_object() that deals with calling
git_deflate() into a utility function, a subsequent commit will
introduce another function that'll make use of it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When writing a large blob using "write_loose_object()", we have to pass
a buffer with the whole content of the blob, and this behavior will
consume lots of memory and may cause OOM. We will introduce a stream
version function ("stream_loose_object()") in later commit to resolve
this issue.
Before introducing that streaming function, do some refactoring on
"write_loose_object()" to reuse code for both versions.
Rewrite "write_loose_object()" as follows:
1. Figure out a path for the (temp) object file. This step is only
used in "write_loose_object()".
2. Move common steps for starting to write loose objects into a new
function "start_loose_object_common()".
3. Compress data.
4. Move common steps for ending zlib stream into a new function
"end_loose_object_common()".
5. Close fd and finalize the object file.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Han Xin <chiyutianyi@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename .env_array member to .env in the child_process structure.
* ab/env-array:
run-command API users: use "env" not "env_array" in comments & names
run-command API: rename "env_array" to "env"
|
|
A mechanism to pack unreachable objects into a "cruft pack",
instead of ejecting them into loose form to be reclaimed later, has
been introduced.
* tb/cruft-packs:
sha1-file.c: don't freshen cruft packs
builtin/gc.c: conditionally avoid pruning objects via loose
builtin/repack.c: add cruft packs to MIDX during geometric repack
builtin/repack.c: use named flags for existing_packs
builtin/repack.c: allow configuring cruft pack generation
builtin/repack.c: support generating a cruft pack
builtin/pack-objects.c: --cruft with expiration
reachable: report precise timestamps from objects in cruft packs
reachable: add options to add_unseen_recent_objects_to_traversal
builtin/pack-objects.c: --cruft without expiration
builtin/pack-objects.c: return from create_object_entry()
t/helper: add 'pack-mtimes' test-tool
pack-mtimes: support writing pack .mtimes files
chunk-format.h: extract oid_version()
pack-write: pass 'struct packing_data' to 'stage_tmp_packfiles'
pack-mtimes: support reading .mtimes files
Documentation/technical: add cruft-packs.txt
|
|
Coding style fix.
* ds/object-file-unpack-loose-header-fix:
object-file: convert 'switch' back to 'if'
|
