| Age | Commit message (Collapse) | Author |
|---|
|
Remove unused header "#include".
* en/header-cleanup:
treewide: remove unnecessary includes in source files
treewide: add direct includes currently only pulled in transitively
trace2/tr2_tls.h: remove unnecessary include
submodule-config.h: remove unnecessary include
pkt-line.h: remove unnecessary include
line-log.h: remove unnecessary include
http.h: remove unnecessary include
fsmonitor--daemon.h: remove unnecessary includes
blame.h: remove unnecessary includes
archive.h: remove unnecessary include
treewide: remove unnecessary includes in source files
treewide: remove unnecessary includes from header files
|
|
Each of these were checked with
gcc -E -I. ${SOURCE_FILE} | grep ${HEADER_FILE}
to ensure that removing the direct inclusion of the header actually
resulted in that header no longer being included at all (i.e. that
no other header pulled it in transitively).
...except for a few cases where we verified that although the header
was brought in transitively, nothing from it was directly used in
that source file. These cases were:
* builtin/credential-cache.c
* builtin/pull.c
* builtin/send-pack.c
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git $cmd --end-of-options --rev -- --path" for some $cmd failed
to interpret "--rev" as a rev, and "--path" as a path. This was
fixed for many programs like "reset" and "checkout".
* jk/end-of-options:
parse-options: decouple "--end-of-options" and "--"
|
|
When we added generic end-of-options support in 51b4594b40
(parse-options: allow --end-of-options as a synonym for "--",
2019-08-06), we made them true synonyms. They both stop option parsing,
and they are both returned in the resulting argv if the KEEP_DASHDASH
flag is used.
The hope was that this would work for all callers:
- most generic callers would not pass KEEP_DASHDASH, and so would just
do the right thing (stop parsing there) without needing to know
anything more.
- callers with KEEP_DASHDASH were generally going to rely on
setup_revisions(), which knew to handle --end-of-options specially
But that turned out miss quite a few cases that pass KEEP_DASHDASH but
do their own manual parsing. For example, "git reset", "git checkout",
and so on want pass KEEP_DASHDASH so they can support:
git reset $revs -- $paths
but of course aren't going to actually do a traversal, so they don't
call setup_revisions(). And those cases currently get confused by
--end-of-options being left in place, like:
$ git reset --end-of-options HEAD
fatal: option '--end-of-options' must come before non-option arguments
We could teach each of these callers to handle the leftover option
explicitly. But let's try to be a bit more clever and see if we can
solve it centrally in parse-options.c.
The bogus assumption here is that KEEP_DASHDASH tells us the caller
wants to see --end-of-options in the result. But really, the callers
which need to know that --end-of-options was reached are those that may
potentially parse more options from argv. In other words, those that
pass the KEEP_UNKNOWN_OPT flag.
If such a caller is aware of --end-of-options (e.g., because they call
setup_revisions() with the result), then this will continue to do the
right thing, treating anything after --end-of-options as a non-option.
And if the caller is not aware of --end-of-options, they are better off
keeping it intact, because either:
1. They are just passing the options along to somebody else anyway, in
which case that somebody would need to know about the
--end-of-options marker.
2. They are going to parse the remainder themselves, at which point
choking on --end-of-options is much better than having it silently
removed. The point is to avoid option injection from untrusted
command line arguments, and bailing is better than quietly treating
the untrusted argument as an option.
This fixes bugs with --end-of-options across several commands, but I've
focused on two in particular here:
- t7102 confirms that "git reset --end-of-options --foo" now works.
This checks two things. One, that we no longer barf on
"--end-of-options" itself (which previously we did, even if the rev
was something vanilla like "HEAD" instead of "--foo"). And two, that
we correctly treat "--foo" as a revision rather than an option.
This fix applies to any other cases which pass KEEP_DASHDASH but not
KEEP_UNKNOWN_OPT, like "git checkout", "git check-attr", "git grep",
etc, which would previously choke on "--end-of-options".
- t9350 shows the opposite case: fast-export passed KEEP_UNKNOWN_OPT
but not KEEP_DASHDASH, but then passed the result on to
setup_revisions(). So it never saw --end-of-options, and would
erroneously parse "fast-export --end-of-options --foo" as having a
"--foo" option. This is now fixed.
Note that this does shut the door for callers which want to know if we
hit end-of-options, but don't otherwise need to keep unknown opts. The
obvious thing here is feeding it to the DWIM verify_filename()
machinery. And indeed, this is a problem even for commands which do
understand --end-of-options already. For example, without this patch,
you get:
$ git log --end-of-options --foo
fatal: option '--foo' must come before non-option arguments
because we refuse to accept "--foo" as a filename (because it starts
with a dash) even though we could know that we saw end-of-options. The
verify_filename() function simply doesn't accept this extra information.
So that is the status quo, and this patch doubles down further on that.
Commands like "git reset" have the same problem, but they won't even
know that parse-options saw --end-of-options! So even if we fixed
verify_filename(), they wouldn't have anything to pass to it.
But in practice I don't think this is a big deal. If you are being
careful enough to use --end-of-options, then you should also be using
"--" to disambiguate and avoid the DWIM behavior in the first place. In
other words, doing:
git log --end-of-options --this-is-a-rev -- --this-is-a-path
works correctly, and will continue to do so. And likewise, with this
patch now:
git reset --end-of-options --this-is-a-rev -- --this-is-a-path
will work, as well.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Continue the work of 12909b6b8a (i18n: turn "options are incompatible"
into "cannot be used together", 2022-01-05) and a699367bb8 (i18n:
factorize more 'incompatible options' messages, 2022-01-31) to use the
same parameterized error message for reporting incompatible command line
options. This reduces the number of strings to translate and makes the
UI slightly more consistent.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Only a single PARSE_OPT_CMDMODE option can be specified for the same
variable at the same time. This is enforced by get_value(), but the
error messages are imprecise in three ways:
1. If a non-PARSE_OPT_CMDMODE option changes the value variable of a
PARSE_OPT_CMDMODE option then an ominously vague message is shown:
$ t/helper/test-tool parse-options --set23 --mode1
error: option `mode1' : incompatible with something else
Worse: If the order of options is reversed then no error is reported at
all:
$ t/helper/test-tool parse-options --mode1 --set23
boolean: 0
integer: 23
magnitude: 0
timestamp: 0
string: (not set)
abbrev: 7
verbose: -1
quiet: 0
dry run: no
file: (not set)
Fortunately this can currently only happen in the test helper; actual
Git commands don't share the same variable for the value of options with
and without the flag PARSE_OPT_CMDMODE.
2. If there are multiple options with the same value (synonyms), then
the one that is defined first is shown rather than the one actually
given on the command line, which is confusing:
$ git am --resolved --quit
error: option `quit' is incompatible with --continue
3. Arguments of PARSE_OPT_CMDMODE options are not handled by the
parse-option machinery. This is left to the callback function. We
currently only have a single affected option, --show-current-patch of
git am. Errors for it can show an argument that was not actually given
on the command line:
$ git am --show-current-patch --show-current-patch=diff
error: options '--show-current-patch=diff' and '--show-current-patch=raw' cannot be used together
The options --show-current-patch and --show-current-patch=raw are
synonyms, but the error accuses the user of input they did not actually
made. Or it can awkwardly print a NULL pointer:
$ git am --show-current-patch=diff --show-current-patch
error: options '--show-current-patch=(null)' and '--show-current-patch=diff' cannot be used together
The reasons for these shortcomings is that the current code checks
incompatibility only when encountering a PARSE_OPT_CMDMODE option at the
command line, and that it searches the previous incompatible option by
value.
Fix the first two points by checking all PARSE_OPT_CMDMODE variables
after parsing each option and by storing all relevant details if their
value changed. Do that whether or not the changing options has the flag
PARSE_OPT_CMDMODE set. Report an incompatibility only if two options
change the variable to different values and at least one of them is a
PARSE_OPT_CMDMODE option. This changes the output of the first three
examples above to:
$ t/helper/test-tool parse-options --set23 --mode1
error: --mode1 is incompatible with --set23
$ t/helper/test-tool parse-options --mode1 --set23
error: --set23 is incompatible with --mode1
$ git am --resolved --quit
error: --quit is incompatible with --resolved
Store the argument of PARSE_OPT_CMDMODE options of type OPTION_CALLBACK
as well to allow taking over the responsibility for compatibility
checking from the callback function. The next patch will use this
capability to fix the messages for git am --show-current-patch.
Use a linked list for storing the PARSE_OPT_CMDMODE variables. This
somewhat outdated data structure is simple and suffices, as the number
of elements per command is currently only zero or one. We do support
multiple different command modes variables per command, but I don't
expect that we'd ever use a significant number of them. Once we do we
can switch to a hashmap.
Since we no longer need to search the conflicting option, the all_opts
parameter of get_value() is no longer used. Remove it.
Extend the tests to check for both conflicting option names, but don't
insist on a particular order.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The files config.{h,c} contain functions that have to do with parsing,
but not config.
In order to further reduce all-in-one headers, separate out functions in
config.c that do not operate on config into its own file, parse.h,
and update the include directives in the .c files that need only such
functions accordingly.
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
1b68387e02 (builtin/receive-pack.c: use parse_options API, 2016-03-02)
added the options --stateless-rpc, --advertise-refs and
--reject-thin-pack-for-testing with a NULL `help` string; 03831ef7b5
(difftool: implement the functionality in the builtin, 2017-01-19)
similarly added the "helpless" option --prompt. Presumably this was
done because all four options are hidden and self-explanatory.
They cause a NULL pointer dereference when using the option --help-all
with their respective tool, though. Handle such options gracefully
instead by turning the NULL pointer into an empty string at the top of
the loop, always printing a newline at the end and passing through the
separating newlines from the help text.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git cmd -h" learned to signal which options can be negated by
listing such options like "--[no-]opt".
* rs/parse-options-negation-help:
parse-options: simplify usage_padding()
parse-options: no --[no-]no-...
parse-options: factor out usage_indent() and usage_padding()
parse-options: show negatability of options in short help
t1502: test option negation
t1502: move optionspec help output to a file
t1502, docs: disallow --no-help
subtree: disallow --no-{help,quiet,debug,branch,message}
|
|
An option of type OPTION_SET_INT can be defined to set its variable to
zero. It's negated variant will do the same, though, which is
confusing. Several such options were fixed by disabling negation,
changing the value to set or using a different option type:
991c552916 (ls-tree: fix --no-full-name, 2023-07-18)
e12cb98e1e (branch: reject "--no-all" and "--no-remotes" early, 2023-07-18)
68cbb20e73 (show-branch: reject --[no-](topo|date)-order, 2023-07-19)
3821eb6c3d (reset: reject --no-(mixed|soft|hard|merge|keep) option, 2023-07-19)
36f76d2a25 (pack-objects: fix --no-quiet, 2023-07-21)
3a5f308741 (pack-objects: fix --no-keep-true-parents, 2023-07-21)
c95ae3ff9c (describe: fix --no-exact-match, 2023-07-21)
d089a06421 (bundle: use OPT_PASSTHRU_ARGV, 2023-07-29)
Check for such options that allow negation in parse_options_check() and
report them to find future cases quicker.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
c512643e67 (short help: allow a gap smaller than USAGE_GAP, 2023-07-18)
effectively did away with the two-space gap between options and their
description; one space is enough now. Incorporate USAGE_GAP into
USAGE_OPTS_WIDTH, merge the two cases with enough space on the line and
incorporate the newline into the format for the remaining case. The
output remains the same.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Avoid showing an optional "no-" for options that already start with a
"no-" in the short help, as that double negation is confusing. Document
the opposite variant on its own line with a generated help text instead,
unless it's defined and documented explicitly already.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Extract functions for printing spaces before and after options. We'll
need them in the next commit.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a "[no-]" prefix to options without the flag PARSE_OPT_NONEG to
document the fact that you can negate them.
This looks a bit strange for options that already start with "no-", e.g.
for the option --no-name of git show-branch:
--[no-]no-name suppress naming strings
You can actually use --no-no-name as an alias of --name, so the short
help is not wrong. If we strip off any of the "no-"s, we lose either
the ability to see if the remaining one belongs to the documented
variant or to see if it can be negated.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The parse-options API responds to "git cmd -h" by listing the option
flag (padded to the USAGE_OPTS_WIDTH column), followed by USAGE_GAP
(set to 2) whitespaces, followed by the help text. If the flags
part does not fit within the USAGE_OPTS_WIDTH, the help text is given
on its own line. Imagine that "@" below depicts the USAGE_OPTS_WIDTH'th
column, and "#" are for the usage help text, the output may look
like this:
@@@@@@@@@@@@@ ########################################
-f description of the flag '-f' comes here
--short=<num> description of the flag '--short'
--very-long-option=<number>
description of the flag '--very-long-option'
This is all good and nice in principle, but it becomes awkward when
the flags part is just one column over the limit and forces a line
break. See the description of the "--almost" option below:
@@@@@@@@@@@@@ ########################################
-f description of the flag '-f' comes here
--short=<num> description of the flag '--short'
--almost=<num>
description of the flag '--almost'
--very-long-option=<number>
description of the flag '--very-long-option'
If we allow shrinking the gap to a single whitespace only in such a
case, we would instead get:
@@@@@@@@@@@@@ ########################################
-f description of the flag '-f' comes here
--short=<num> description of the flag '--short'
--almost=<num> description of the flag '--almost'
--very-long-option=<number>
description of the flag '--very-long-option'
and the boundary between the flags and their descriptions does not
become any harder to see, while saving precious vertical screen real
estate.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "-h" triggers the short-help in a command that implements its
option parsing using the parse-options API, the option help text is
shown with a single fprintf() as a long line. When the text is
multi-line, the second and subsequent lines are not left padded,
that breaks the alignment across options.
Borrowing the idea from the advice API where its hint strings are
shown with (localized) "hint:" prefix, let's internally split the
(localized) help text into lines, and showing the first line, pad
the remaining lines to align.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The last several commits were geared at replacing the include of cache.h
in strbuf.c with an include of git-compat-util.h. Unfortunately, I had
to drop a patch moving some functions from cache.h to object-name.h, due
to excessive conflicts with other in-flight topics.
However, even without that patch, the series of patches so far allows us
to modify a number of C files to replace an include of cache.h with
git-compat-util.h. Do that to reduce our dependencies.
(If we could have kept our object-name.h patch in this series, it would
have also let us reduce the includes in checkout.c and fmt-merge-msg.c
in addition to strbuf.c).
Just to ensure that nothing else was bringing in cache.h, all of the
affected files have been checked to ensure that
gcc -E -I. $SOURCE_FILE | grep '"cache.h"'
found no hits and that
make DEVELOPER=1 ${OBJECT_FILE_FOR_SOURCE_FILE}
successfully compiles without warnings.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is another step towards letting us remove the include of cache.h in
strbuf.c. It does mean that we also need to add includes of abspath.h
in a number of C files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git bundle" learned that "-" is a common way to say that the input
comes from the standard input and/or the output goes to the
standard output. It used to work only for output and only from the
root level of the working tree.
* jk/bundle-use-dash-for-stdfiles:
parse-options: use prefix_filename_except_for_dash() helper
parse-options: consistently allocate memory in fix_filename()
bundle: don't blindly apply prefix_filename() to "-"
bundle: document handling of "-" as stdin
bundle: let "-" mean stdin for reading operations
|
|
Since our fix_filename()'s only remaining special case is handling "-",
we can use the newly-minted helper function that handles this already.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When handling OPT_FILENAME(), we have to stick the "prefix" (if any) in
front of the filename to make up for the fact that Git has chdir()'d to
the top of the repository. We can do this with prefix_filename(), but
there are a few special cases we handle ourselves.
Unfortunately the memory allocation is inconsistent here; if we do make
it to prefix_filename(), we'll allocate a string which the caller must
free to avoid a leak. But if we hit our special cases, we'll return the
string as-is, and a caller which tries to free it will crash. So there's
no way to win.
Let's consistently allocate, so that callers can do the right thing.
There are now three cases to care about in the function (and hence a
three-armed if/else):
1. we got a NULL input (and should leave it as NULL, though arguably
this is the sign of a bug; let's keep the status quo for now and we
can pick at that scab later)
2. we hit a special case that means we leave the name intact; we
should duplicate the string. This includes our special "-"
matching. Prior to this patch, it also included empty prefixes and
absolute filenames. But we can observe that prefix_filename()
already handles these, so we don't need to detect them.
3. everything else goes to prefix_filename()
I've dropped the "const" from the "char **file" parameter to indicate
that we're allocating, though in practice it's not really important.
This is all being shuffled through a void pointer via opt->value before
it hits code which ever looks at the string. And it's even a bit weird,
because we are really taking _in_ a const string and using the same
out-parameter for a non-const string. A better function signature would
be:
static char *fix_filename(const char *prefix, const char *file);
but that would mean the caller dereferences the double-pointer (and the
NULL check is currently handled inside this function). So I took the
path of least-change here.
Note that we have to fix several callers in this commit, too, or we'll
break the leak-checking tests. These are "new" leaks in the sense that
they are now triggered by the test suite, but these spots have always
been leaky when Git is run in a subdirectory of the repository. I fixed
all of the cases that trigger with GIT_TEST_PASSING_SANITIZE_LEAK. There
may be others in scripts that have other leaks, but we can fix them
later along with those other leaks (and again, you _couldn't_ fix them
before this patch, so this is the necessary first step).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a semantic patch for replace ALLOC_ARRAY+COPY_ARRAY with DUP_ARRAY
to reduce code duplication and apply its results.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Several Git commands have subcommands to implement mutually exclusive
"operation modes", and they usually parse their subcommand argument
with a bunch of if-else if statements.
Teach parse-options to handle subcommands as well, which will result
in shorter and simpler code with consistent error handling and error
messages on unknown or missing subcommand, and it will also make
possible for our Bash completion script to handle subcommands
programmatically.
The approach is guided by the following observations:
- Most subcommands [1] are implemented in dedicated functions, and
most of those functions [2] either have a signature matching the
'int cmd_foo(int argc, const char **argc, const char *prefix)'
signature of builtin commands or can be trivially converted to
that signature, because they miss only that last prefix parameter
or have no parameters at all.
- Subcommand arguments only have long form, and they have no double
dash prefix, no negated form, and no description, and they don't
take any arguments, and can't be abbreviated.
- There must be exactly one subcommand among the arguments, or zero
if the command has a default operation mode.
- All arguments following the subcommand are considered to be
arguments of the subcommand, and, conversely, arguments meant for
the subcommand may not preceed the subcommand.
So in the end subcommand declaration and parsing would look something
like this:
parse_opt_subcommand_fn *fn = NULL;
struct option builtin_commit_graph_options[] = {
OPT_STRING(0, "object-dir", &opts.obj_dir, N_("dir"),
N_("the object directory to store the graph")),
OPT_SUBCOMMAND("verify", &fn, graph_verify),
OPT_SUBCOMMAND("write", &fn, graph_write),
OPT_END(),
};
argc = parse_options(argc, argv, prefix, options,
builtin_commit_graph_usage, 0);
return fn(argc, argv, prefix);
Here each OPT_SUBCOMMAND specifies the name of the subcommand and the
function implementing it, and the address of the same 'fn' subcommand
function pointer. parse_options() then processes the arguments until
it finds the first argument matching one of the subcommands, sets 'fn'
to the function associated with that subcommand, and returns, leaving
the rest of the arguments unprocessed. If none of the listed
subcommands is found among the arguments, parse_options() will show
usage and abort.
If a command has a default operation mode, 'fn' should be initialized
to the function implementing that mode, and parse_options() should be
invoked with the PARSE_OPT_SUBCOMMAND_OPTIONAL flag. In this case
parse_options() won't error out when not finding any subcommands, but
will return leaving 'fn' unchanged. Note that if that default
operation mode has any --options, then the PARSE_OPT_KEEP_UNKNOWN_OPT
flag is necessary as well (otherwise parse_options() would error out
upon seeing the unknown option meant to the default operation mode).
Some thoughts about the implementation:
- The same pointer to 'fn' must be specified as 'value' for each
OPT_SUBCOMMAND, because there can be only one set of mutually
exclusive subcommands; parse_options() will BUG() otherwise.
There are other ways to tell parse_options() where to put the
function associated with the subcommand given on the command line,
but I didn't like them:
- Change parse_options()'s signature by adding a pointer to
subcommand function to be set to the function associated with
the given subcommand, affecting all callsites, even those that
don't have subcommands.
- Introduce a specific parse_options_and_subcommand() variant
with that extra funcion parameter.
- I decided against automatically calling the subcommand function
from within parse_options(), because:
- There are commands that have to perform additional actions
after option parsing but before calling the function
implementing the specified subcommand.
- The return code of the subcommand is usually the return code
of the git command, but preserving the return code of the
automatically called subcommand function would have made the
API awkward.
- Also add a OPT_SUBCOMMAND_F() variant to allow specifying an
option flag: we have two subcommands that are purposefully
excluded from completion ('git remote rm' and 'git stash save'),
so they'll have to be specified with the PARSE_OPT_NOCOMPLETE
flag.
- Some of the 'parse_opt_flags' don't make sense with subcommands,
and using them is probably just an oversight or misunderstanding.
Therefore parse_options() will BUG() when invoked with any of the
following flags while the options array contains at least one
OPT_SUBCOMMAND:
- PARSE_OPT_KEEP_DASHDASH: parse_options() stops parsing
arguments when encountering a "--" argument, so it doesn't
make sense to expect and keep one before a subcommand, because
it would prevent the parsing of the subcommand.
However, this flag is allowed in combination with the
PARSE_OPT_SUBCOMMAND_OPTIONAL flag, because the double dash
might be meaningful for the command's default operation mode,
e.g. to disambiguate refs and pathspecs.
- PARSE_OPT_STOP_AT_NON_OPTION: As its name suggests, this flag
tells parse_options() to stop as soon as it encouners a
non-option argument, but subcommands are by definition not
options... so how could they be parsed, then?!
- PARSE_OPT_KEEP_UNKNOWN: This flag can be used to collect any
unknown --options and then pass them to a different command or
subsystem. Surely if a command has subcommands, then this
functionality should rather be delegated to one of those
subcommands, and not performed by the command itself.
However, this flag is allowed in combination with the
PARSE_OPT_SUBCOMMAND_OPTIONAL flag, making possible to pass
--options to the default operation mode.
- If the command with subcommands has a default operation mode, then
all arguments to the command must preceed the arguments of the
subcommand.
AFAICT we don't have any commands where this makes a difference,
because in those commands either only the command accepts any
arguments ('notes' and 'remote'), or only the default subcommand
('reflog' and 'stash'), but never both.
- The 'argv' array passed to subcommand functions currently starts
with the name of the subcommand. Keep this behavior. AFAICT no
subcommand functions depend on the actual content of 'argv[0]',
but the parse_options() call handling their options expects that
the options start at argv[1].
- To support handling subcommands programmatically in our Bash
completion script, 'git cmd --git-completion-helper' will now list
both subcommands and regular --options, if any. This means that
the completion script will have to separate subcommands (i.e.
words without a double dash prefix) from --options on its own, but
that's rather easy to do, and it's not much work either, because
the number of subcommands a command might have is rather low, and
those commands accept only a single --option or none at all. An
alternative would be to introduce a separate option that lists
only subcommands, but then the completion script would need not
one but two git invocations and command substitutions for commands
with subcommands.
Note that this change doesn't affect the behavior of our Bash
completion script, because when completing the --option of a
command with subcommands, e.g. for 'git notes --<TAB>', then all
subcommands will be filtered out anyway, as none of them will
match the word to be completed starting with that double dash
prefix.
[1] Except 'git rerere', because many of its subcommands are
implemented in the bodies of the if-else if statements parsing the
command's subcommand argument.
[2] Except 'credential', 'credential-store' and 'fsmonitor--daemon',
because some of the functions implementing their subcommands take
special parameters.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The output of 'git <cmd> --git-completion-helper' always starts with a
space, e.g.:
$ git config --git-completion-helper
--global --system --local [...]
This doesn't matter for the completion script, because field splitting
discards that space anyway.
However, later patches in this series will teach parse-options to
handle subcommands, and subcommands will be included in the completion
helper output as well. This will make the loop printing options (and
subcommands) a tad more complex, so I wanted to test the result. The
test would have to account for the presence of that leading space,
which bugged my OCD, so let's get rid of it.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The description of 'PARSE_OPT_KEEP_UNKNOWN' starts with "Keep unknown
arguments instead of erroring out". This is a bit misleading, as this
flag only applies to unknown --options, while non-option arguments are
kept even without this flag.
Update the description to clarify this, and rename the flag to
PARSE_OPTIONS_KEEP_UNKNOWN_OPT to make this obvious just by looking at
the flag name.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the assertions added in bf3ff338a25 (parse-options: stop
abusing 'callback' for lowlevel callbacks, 2019-01-27) to use optbug()
instead of BUG(). At this point we're looping over individual options,
so if we encounter any issues we'd like to report the offending option.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we run into bugs in parse-options.c usage it's good to be able to
note all the issues we ran into before dying. This use-case is why we
have the optbug() function introduced in 1e5ce570ca3 (parse-options:
clearer reporting of API misuse, 2010-12-02)
Let's change this code to use the new bug() API introduced in the
preceding commit, which cuts down on the verbosity of
parse_options_check().
There are existing uses of BUG() in adjacent code that should have
been using optbug() that aren't being changed here. That'll be done in
a subsequent commit. This only changes the optbug() callers.
Since this will invoke BUG() the previous exit(128) code will be
changed, but in this case that's what we want, i.e. to have
encountering a BUG() return the specific "BUG" exit code.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Unify more messages to help l10n.
* ja/i18n-common-messages:
i18n: fix some misformated placeholders in command synopsis
i18n: remove from i18n strings that do not hold translatable parts
i18n: factorize "invalid value" messages
i18n: factorize more 'incompatible options' messages
|
|
Assorted updates to "git cat-file", especially "-h".
* ab/cat-file:
cat-file: s/_/-/ in typo'd usage_msg_optf() message
cat-file: don't whitespace-pad "(...)" in SYNOPSIS and usage output
cat-file: use GET_OID_ONLY_TO_DIE in --(textconv|filters)
object-name.c: don't have GET_OID_ONLY_TO_DIE imply *_QUIETLY
cat-file: correct and improve usage information
cat-file: fix remaining usage bugs
cat-file: make --batch-all-objects a CMDMODE
cat-file: move "usage" variable to cmd_cat_file()
cat-file docs: fix SYNOPSIS and "-h" output
parse-options API: add a usage_msg_optf()
cat-file tests: test messaging on bad objects/paths
cat-file tests: test bad usage
|
|
Find more incompatible options to factorize.
When more than two options are mutually exclusive, print the ones
which are actually on the command line.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up to hide vreportf() from public API.
* ab/usage-die-message:
config API: use get_error_routine(), not vreportf()
usage.c + gc: add and use a die_message_errno()
gc: return from cmd_gc(), don't call exit()
usage.c API users: use die_message() for error() + exit 128
usage.c API users: use die_message() for "fatal :" + exit 128
usage.c: add a die_message() routine
|
|
Add a usage_msg_optf() as a shorthand for the sort of
usage_msg_opt(xstrfmt(...)) used in builtin/stash.c. I'll make more
use of this function in builtin/cat-file.c shortly.
The disconnect between the "..." and "fmt" is a bit unusual, but it
works just fine and this keeps it consistent with usage_msg_opt(),
i.e. a caller of it can be moved to usage_msg_optf() and not have to
have its arguments re-arranged.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the type of an internal function to return an enum (instead
of int) and replace -2 that was used to signal an error with -1.
* ab/parse-options-cleanup:
parse-options.c: use "enum parse_opt_result" for parse_nodash_opt()
|
|
Change code that printed its own "fatal: " message and exited with a
status code of 128 to use the die_message() function added in a
preceding commit.
This change also demonstrates why the return value of
die_message_routine() needed to be that of "report_fn". We have
callers such as the run-command.c::child_err_spew() which would like
to replace its error routine with the return value of
"get_die_message_routine()".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the parse_nodash_opt() function to use "enum
parse_opt_result". In 352e761388b (parse-options.[ch]: consistently
use "enum parse_opt_result", 2021-10-08) its only caller
parse_options_step() started using that return type, and the
get_value() which will be called and return from it uses the same
enum.
Let's do the same here so that this function always returns an "enum
parse_opt_result" value.
We could go for either PARSE_OPT_HELP (-2) or PARSE_OPT_ERROR (-1)
here. The reason we ended up with "-2" is that in code added in
07fe54db3cd (parse-opt: do not print errors on unknown options, return
"-2" instead., 2008-06-23) we used that value in a meaningful way.
Then in 51a9949eda7 (parseopt: add PARSE_OPT_NODASH, 2009-05-07) the
use of "-2" was seemingly copy/pasted from parse_long_opt(), which was
the function immediately above the parse_nodash_opt() function added
in that commit.
Since we only care about whether the return value here is non-zero
let's use the more generic PARSE_OPT_ERROR.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Last minute fix to the update already in 'master'.
* ab/parse-options-cleanup:
parse-options.[ch]: revert use of "enum" for parse_options()
|
|
Revert the parse_options() prototype change in my recent
352e761388b (parse-options.[ch]: consistently use "enum
parse_opt_result", 2021-10-08) was incorrect. The parse_options()
function returns the number of argc elements that haven't been
processed, not "enum parse_opt_result".
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Random changes to parse-options implementation.
* ab/parse-options-cleanup:
parse-options: change OPT_{SHORT,UNSET} to an enum
parse-options tests: test optname() output
parse-options.[ch]: make opt{bug,name}() "static"
commit-graph: stop using optname()
parse-options.c: move optname() earlier in the file
parse-options.h: make the "flags" in "struct option" an enum
parse-options.c: use exhaustive "case" arms for "enum parse_opt_result"
parse-options.[ch]: consistently use "enum parse_opt_result"
parse-options.[ch]: consistently use "enum parse_opt_flags"
parse-options.h: move PARSE_OPT_SHELL_EVAL between enums
|
|
When "git cmd -h" shows more than one line of usage text (e.g.
the cmd subcommand may take sub-sub-command), parse-options API
learned to align these lines, even across i18n/l10n.
* ab/align-parse-options-help:
parse-options: properly align continued usage output
git rev-parse --parseopt tests: add more usagestr tests
send-pack: properly use parse_options() API for usage string
parse-options API users: align usage output in C-strings
|
|
Change the comparisons against OPT_SHORT and OPT_UNSET to an enum
which keeps track of how a given option got parsed. The case of "0"
was an implicit OPT_LONG, so let's add an explicit label for it.
Due to the xor in 0f1930c5875 (parse-options: allow positivation of
options starting, with no-, 2012-02-25) the code already relied on
this being set back to 0. To avoid refactoring the logic involved in
that let's just start the enum at "0" instead of the usual "1<<0" (1),
but BUG() out if we don't have one of our expected flags.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change these two functions to "static", the last user of "optname()"
outside of parse-options.c itself went away in the preceding commit,
for the reasons noted in 9440b831ad5 (parse-options: replace
opterror() with optname(), 2018-11-10) we shouldn't be adding any more
users of it.
The "optbug()" function was never used outside of parse-options.c, but
was made non-static in 1f275b7c4ca (parse-options: export opterr,
optbug, 2011-08-11). I think the only external user of optname() was
the commit-graph.c caller added in 09e0327f57 (builtin/commit-graph.c:
introduce '--max-new-filters=<n>', 2020-09-18).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preparation for making "optname" a static function move it above
its first user in parse-options.c.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the "default" case in parse_options() that handles the return
value of parse_options_step() to simply have a "case" arm for
PARSE_OPT_UNKNOWN, instead of leaving it to a comment. This means the
compiler can warn us about any missing case arms.
This adjusts code added in ff43ec3e2d2 (parse-opt: create
parse_options_step., 2008-06-23), given its age it may pre-date the
existence (or widespread use) of this coding style, which we've since
adopted more widely.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the "enum parse_opt_result" instead of an "int flags" as the
return value of the applicable functions in parse-options.c.
This will help catch future bugs, such as the missing "case" arms in
the two existing users of the API in "blame.c" and "shortlog.c". A
third caller in 309be813c9b (update-index: migrate to parse-options
API, 2010-12-01) was already checking for these.
As can be seen when trying to sort through the deluge of warnings
produced when compiling this with CC=g++ (mostly unrelated to this
change) we're not consistently using "enum parse_opt_result" even now,
i.e. we'll return error() and "return 0;". See f41179f16ba
(parse-options: avoid magic return codes, 2019-01-27) for a commit
which started changing some of that.
I'm not doing any more of that exhaustive migration here, and it's
probably not worthwhile past the point of being able to check "enum
parse_opt_result" in switch().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the "enum parse_opt_flags" instead of an "int flags" as arguments
to the various functions in parse-options.c.
Even though this is an enum bitfield there's there's a benefit to
doing this when it comes to the wider C ecosystem. E.g. the GNU
debugger (gdb) will helpfully detect and print out meaningful enum
labels in this case. Here's the output before and after when breaking
in "parse_options()" after invoking "git stash show":
Before:
(gdb) p flags
$1 = 9
After:
(gdb) p flags
$1 = (PARSE_OPT_KEEP_DASHDASH | PARSE_OPT_KEEP_UNKNOWN)
Of course as noted in[1] there's a limit to this smartness,
i.e. manually setting it with unrelated enum labels won't be
caught. There are some third-party extensions to do more exhaustive
checking[2], perhaps we'll be able to make use of them sooner than
later.
We've also got prior art using this pattern in the codebase. See
e.g. "enum bloom_filter_computed" added in 312cff52074 (bloom: split
'get_bloom_filter()' in two, 2020-09-16) and the "permitted" enum
added in ce910287e72 (add -p: fix checking of user input, 2020-08-17).
1. https://lore.kernel.org/git/87mtnvvj3c.fsf@evledraar.gmail.com/
2. https://github.com/sinelaw/elfs-clang-plugins/blob/master/enums_conversion/README.md
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some commands such as "git stash" emit continued options output with
e.g. "git stash -h", because usage_with_options_internal() prefixes
with its own whitespace the resulting output wasn't properly
aligned. Let's account for the added whitespace, which properly aligns
the output.
The "git stash" command has usage output with a N_() translation that
legitimately stretches across multiple lines;
N_("git stash [push [-p|--patch] [-k|--[no-]keep-index] [-q|--quiet]\n"
" [-u|--include-untracked] [-a|--all] [-m|--message <message>]\n"
[...]
We'd like to have that output aligned with the length of the initial
"git stash " output, but since usage_with_options_internal() adds its
own whitespace prefixing we fell short, before this change we'd emit:
$ git stash -h
usage: git stash list [<options>]
or: git stash show [<options>] [<stash>]
[...]
or: git stash [push [-p|--patch] [-k|--[no-]keep-index] [-q|--quiet]
[-u|--include-untracked] [-a|--all] [-m|--message <message>]
[...]
Now we'll properly emit aligned output. I.e. the last four lines
above will instead be (a whitespace-only change to the above):
[...]
or: git stash [push [-p|--patch] [-k|--[no-]keep-index] [-q|--quiet]
[-u|--include-untracked] [-a|--all] [-m|--message <message>]
[...]
We could also go for an approach where we have the caller support no
padding of their own, i.e. (same as the first example, except for the
padding on the second line):
N_("git stash [push [-p|--patch] [-k|--[no-]keep-index] [-q|--quiet]\n"
"[-u|--include-untracked] [-a|--all] [-m|--message <message>]\n"
[...]
But to do that we'll need to find the length of "git stash". We can
discover that from the "cmd" in the "struct cmd_struct", but there
might be cases with sub-commands or "git" itself taking arguments that
would make that non-trivial.
Even if it were I still think this approach is better, because this way
we'll get the same legible alignment in the C code. The fact that
usage_with_options_internal() is adding its own prefix padding is an
implementation detail that callers shouldn't need to worry about.
Implementation notes:
We could skip the string_list_split() with a strchr(str, '\n') check,
but we'd then need to duplicate our state machine for strings that do
and don't contain a "\n". It's simpler to just always split into a
"struct string_list", even though the common case is that that "struct
string_list" will contain only one element. This is not
performance-sensitive code.
This change is relatively more complex since I've accounted for making
it future-proof for RTL translation support. Later in
usage_with_options_internal() we have some existing padding code
dating back to d7a38c54a6c (parse-options: be able to generate usages
automatically, 2007-10-15) which isn't RTL-safe, but that code would
be easy to fix. Let's not introduce new RTL translation problems here.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As was noted in 1a85b49b87a (parse-options: make OPT_ARGUMENT() more
useful, 2019-03-14) there's only ever been one user of the
OPT_ARGUMENT(), that user was added in 20de316e334 (difftool: allow
running outside Git worktrees with --no-index, 2019-03-14).
The OPT_ARGUMENT() feature itself was added way back in
580d5bffdea (parse-options: new option type to treat an option-like
parameter as an argument., 2008-03-02), but as discussed in
1a85b49b87a wasn't used until 20de316e334 in 2019.
Now that the preceding commit has migrated this code over to using
"struct strvec" to manage the "args" member of a "struct
child_process", we can just use that directly instead of relying on
OPT_ARGUMENT.
This has a minor change in behavior in that if we'll pass --no-index
we'll now always pass it as the first argument, before we'd pass it in
whatever position the caller did. Preserving this was the real value
of OPT_ARGUMENT(), but as it turns out we didn't need that either. We
can always inject it as the first argument, the other end will parse
it just the same.
Note that we cannot remove the "out" and "cpidx" members of "struct
parse_opt_ctx_t" added in 580d5bffdea, while they were introduced with
OPT_ARGUMENT() we since used them for other things.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 'OPT_ALIAS' was created in 5c387428f1 (parse-options: don't emit
"ambiguous option" for aliases, 2019-04-29), 'git clone
--git-completion-helper', which is used by the Bash completion script to
list options accepted by clone (via '__gitcomp_builtin'), lists both
'--recurse-submodules' and its alias '--recursive', which was not the
case before since '--recursive' had the PARSE_OPT_HIDDEN flag set, and
options with this flag are skipped by 'parse-options.c::show_gitcomp',
which implements 'git <cmd> --git-completion-helper'.
This means that typing 'git clone --recurs<TAB>' will yield both
'--recurse-submodules' and '--recursive', which is not ideal since both
do the same thing, and so the completion should directly complete the
canonical option.
At the point where 'show_gitcomp' is called in 'parse_options_step',
'preprocess_options' was already called in 'parse_options', so any
aliases are now copies of the original options with a modified help text
indicating they are aliases.
Helpfully, since 64cc539fd2 (parse-options: don't leak alias help
messages, 2021-03-21) these copies have the PARSE_OPT_FROM_ALIAS flag
set, so check that flag early in 'show_gitcomp' and do not print them,
unless the user explicitely requested that *all* completion be shown (by
setting 'GIT_COMPLETION_SHOW_ALL'). After all, if we want to encourage
the use of '--recurse-submodules' over '--recursive', we'd better just
suggest the former.
The only other options alias is 'log' and friends' '--mailmap', which is
an alias for '--use-mailmap', but the Bash completion helpers for these
commands do not use '__gitcomp_builtin', and thus are unnaffected by
this change.
Test the new behaviour in t9902-completion.sh. As a side effect, this
also tests the correct behaviour of GIT_COMPLETION_SHOW_ALL, which was
not tested before. Note that since '__gitcomp_builtin' caches the
options it shows, we need to re-source the completion script to clear
that cache for the second test.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
