| Age | Commit message (Collapse) | Author |
|---|
|
Tests update.
* ps/ref-tests-update-more:
t6301: write invalid object ID via `test-tool ref-store`
t5551: stop writing packed-refs directly
t5401: speed up creation of many branches
t4013: simplify magic parsing and drop "failure"
t3310: stop checking for reference existence via `test -f`
t1417: make `reflog --updateref` tests backend agnostic
t1410: use test-tool to create empty reflog
t1401: stop treating FETCH_HEAD as real reference
t1400: split up generic reflog tests from the reffile-specific ones
t0410: mark tests to require the reffiles backend
|
|
Update ref-related tests.
* ps/ref-tests-update:
t: mark several tests that assume the files backend with REFFILES
t7900: assert the absence of refs via git-for-each-ref(1)
t7300: assert exact states of repo
t4207: delete replace references via git-update-ref(1)
t1450: convert tests to remove worktrees via git-worktree(1)
t: convert tests to not access reflog via the filesystem
t: convert tests to not access symrefs via the filesystem
t: convert tests to not write references via the filesystem
t: allow skipping expected object ID in `ref-store update-ref`
|
|
We have a bunch of tests in t1400 that check whether we correctly read
reflog entries. These tests create the reflog by manually writing to the
respective loose file, which makes them specific to the files backend.
But while some of them do indeed exercise very specific edge cases in
the reffiles backend, most of the tests exercise generic functionality
that should be common to all backends.
Unfortunately, we can't easily adapt all of the tests to work with all
backends. Instead, split out the reffile-specific tests from the ones
that should work with all backends and refactor the generic ones to not
write to the on-disk files directly anymore.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add the REFFILES prerequisite to several tests that assume we're using
the files backend. There are various reasons why we cannot easily
convert those tests to be backend-independent, where the most common
one is that we have no way to write corrupt references into the refdb
via our tooling. We may at a later point in time grow the tooling to
make this possible, but for now we just mark these tests as requiring
the files backend.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some of our tests reach directly into the filesystem in order to both
read or modify the reflog, which will break once we have a second
reference backend in our codebase that stores reflogs differently.
Refactor these tests to either use git-reflog(1) or the ref-store test
helper. Note that the refactoring to use git-reflog(1) also requires us
to adapt our expectations in some cases where we previously verified the
exact on-disk log entries. This seems like an acceptable tradeoff though
to ensure that different backends have the same user-visible behaviour
as any user would typically use git-reflog(1) anyway to access the logs.
Any backend-specific verification of the written on-disk format should
be implemented in a separate, backend-specific test.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some of our tests access symbolic references via the filesystem
directly. While this works with the current files reference backend, it
this will break once we have a second reference backend in our codebase.
Refactor these tests to instead use git-symbolic-ref(1) or our
`ref-store` test tool. The latter is required in some cases where safety
checks of git-symbolic-ref(1) would otherwise reject writing a symbolic
reference.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some of our tests manually create, update or delete references by
writing the respective new values into the filesystem directly. While
this works with the current files reference backend, this will break
once we have a second reference backend implementation in our codebase.
Refactor these tests to instead use git-update-ref(1) or our `ref-store`
test tool. The latter is required in some cases where safety checks of
git-update-ref(1) would otherwise reject a reference update.
While at it, refactor some of the tests to schedule the cleanup command
via `test_when_finished` before modifying the repository.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
They are equivalents and the former still exists, so as long as the
only change this commit makes are to rewrite test_i18ngrep to
test_grep, there won't be any new bug, even if there still are
callers of test_i18ngrep remaining in the tree, or when merged to
other topics that add new uses of test_i18ngrep.
This patch was produced more or less with
git grep -l -e 'test_i18ngrep ' 't/t[0-9][0-9][0-9][0-9]-*.sh' |
xargs perl -p -i -e 's/test_i18ngrep /test_grep /'
and a good way to sanity check the result yourself is to run the
above in a checkout of c4603c1c (test framework: further deprecate
test_i18ngrep, 2023-10-31) and compare the resulting working tree
contents with the result of applying this patch to the same commit.
You'll see that test_i18ngrep in a few t/lib-*.sh files corrected,
in addition to the manual reproduction.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In t1400-update-ref.sh test 'transaction can create and delete' creates
files "expect" and "actual", but doesn't compare them. Similarly, test
'transaction cannot restart ongoing transaction' redirects output of
"git update-ref" to file "actual", but doesn't check its contents with
any assertions.
Assert output of "git update-ref" in tests to improve test coverage in
t1400-update-ref.sh.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Broken &&-chains in the test scripts have been corrected.
* es/test-chain-lint:
t6000-t9999: detect and signal failure within loop
t5000-t5999: detect and signal failure within loop
t4000-t4999: detect and signal failure within loop
t0000-t3999: detect and signal failure within loop
tests: simplify by dropping unnecessary `for` loops
tests: apply modern idiom for exiting loop upon failure
tests: apply modern idiom for signaling test failure
tests: fix broken &&-chains in `{...}` groups
tests: fix broken &&-chains in `$(...)` command substitutions
tests: fix broken &&-chains in compound statements
tests: use test_write_lines() to generate line-oriented output
tests: simplify construction of large blocks of text
t9107: use shell parameter expansion to avoid breaking &&-chain
t6300: make `%(raw:size) --shell` test more robust
t5516: drop unnecessary subshell and command invocation
t4202: clarify intent by creating expected content less cleverly
t1020: avoid aborting entire test script when one test fails
t1010: fix unnoticed failure on Windows
t/lib-pager: use sane_unset() to avoid breaking &&-chain
|
|
Many tests that used to need GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
mechanism to force "git" to use 'master' as the default name for
the initial branch no longer need it; the use of the mechanism from
them have been removed.
* js/test-initial-branch-override-cleanup:
tests: set GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME only when needed
|
|
Failures within `for` and `while` loops can go unnoticed if not detected
and signaled manually since the loop itself does not abort when a
contained command fails, nor will a failure necessarily be detected when
the loop finishes since the loop returns the exit code of the last
command it ran on the final iteration, which may not be the command
which failed. Therefore, detect and signal failures manually within
loops using the idiom `|| return 1` (or `|| exit 1` within subshells).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A couple of test scripts have actually been adapted to accommodate for a
configurable default branch name, but they still overrode it via the
`GIT_TEST_*` variable. Let's drop that override where possible.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have some tests that read from files in .git/logs/ hierarchy
when checking if correct reflog entries are created, but that is
too specific to the files backend. Other backends like reftable
may not store its reflog entries in such a "one line per entry"
format.
Update for-each-reflog-ent test helper to produce output that
is identical to lines in a reflog file files backend uses.
That way, (1) the current tests can be updated to use the test
helper to read the reflog entries instead of (parts of) reflog
files, and perform the same inspection for correctness, and (2)
when the ref backend is swapped to another backend, the updated
test can be used as-is to check the correctness.
Adapt t1400 to use the for-each-reflog-ent test helper.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
t1400.190 sometimes fails or even hangs because of the way it uses
fifos. Our goal is to interactively read and write lines from
update-ref, so we have two fifos, in and out. We open a descriptor
connected to "in" and redirect output to that, so that update-ref does
not see EOF as it would if we opened and closed it for each "echo" call.
But we don't do the same for the output. This leads to a race where our
"read response <out" has not yet opened the fifo, but update-ref tries
to write to it and gets SIGPIPE. This can result in the test failing, or
worse, hanging as we wait forever for somebody to write to the pipe.
This is the same proble we fixed in 4783e7ea83 (t0008: avoid SIGPIPE
race condition on fifo, 2013-07-12), and we can fix it the same way, by
opening a second long-running descriptor.
Before this patch, running:
./t1400-update-ref.sh --run=1,190 --stress
failed or hung within a few dozen iterations. After it, I ran it for
several hundred without problems.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When executing git-update-ref(1) with the `--stdin` flag, then the user
can queue updates and, since e48cf33b61 (update-ref: implement
interactive transaction handling, 2020-04-02), interactively drive the
transaction's state via a set of transactional verbs. This interactivity
is somewhat broken though: while the caller can use these verbs to drive
the transaction's state, the status messages which confirm that a verb
has been processed is not flushed. The caller may thus be left hanging
waiting for the acknowledgement.
Fix the bug by flushing stdout after writing the status update. Add a
test which catches this bug.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When deleting a packed ref via 'update-ref -d', a lockfile is made in
the directory that would contain the loose copy of that ref, creating
any directories in the ref's path that do not exist. When the
transaction completes, the lockfile is deleted, but any empty parent
directories made when creating the lockfile are left in place. These
empty directories are not removed by 'pack-refs' or other housekeeping
tasks and will accumulate over time.
When deleting a loose ref, we remove all empty parent directories at the
end of the transaction.
This commit applies the parent directory cleanup logic used when
deleting loose refs to packed refs as well.
Signed-off-by: Will Chandler <wfc@wfchandler.org>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As a follow-up to d162b25f956 (tests: remove support for
GIT_TEST_GETTEXT_POISON, 2021-01-20) remove most uses of test_i18ncmp
via a simple s/test_i18ncmp/test_cmp/g search-replacement.
I'm leaving t6300-for-each-ref.sh out due to a conflict with in-flight
changes between "master" and "seen", as well as the prerequisite
itself due to other changes between "master" and "next/seen" which add
new test_i18ncmp uses.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Prepare tests not to be affected by the name of the default branch
"git init" creates.
* js/default-branch-name-tests-final-stretch: (28 commits)
tests: drop prereq `PREPARE_FOR_MAIN_BRANCH` where no longer needed
t99*: adjust the references to the default branch name "main"
tests(git-p4): transition to the default branch name `main`
t9[5-7]*: adjust the references to the default branch name "main"
t9[0-4]*: adjust the references to the default branch name "main"
t8*: adjust the references to the default branch name "main"
t7[5-9]*: adjust the references to the default branch name "main"
t7[0-4]*: adjust the references to the default branch name "main"
t6[4-9]*: adjust the references to the default branch name "main"
t64*: preemptively adjust alignment to prepare for `master` -> `main`
t6[0-3]*: adjust the references to the default branch name "main"
t5[6-9]*: adjust the references to the default branch name "main"
t55[4-9]*: adjust the references to the default branch name "main"
t55[23]*: adjust the references to the default branch name "main"
t551*: adjust the references to the default branch name "main"
t550*: adjust the references to the default branch name "main"
t5503: prepare aligned comment for replacing `master` with `main`
t5[0-4]*: adjust the references to the default branch name "main"
t5323: prepare centered comment for `master` -> `main`
t4*: adjust the references to the default branch name "main"
...
|
|
In 3224b0f0bb7 (t1400: prepare for `main` being default branch name,
2020-10-23), we prepared t1400 for a time when the default initial
branch name would be `main`.
However, there is no need to wait that long: let's adjust the test
script to stop relying on a specific initial branch name by setting it
explicitly. This allows us to drop the `PREPARE_FOR_MAIN_BRANCH` prereq
from two test cases.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We introduced the `PREPARE_FOR_MAIN_BRANCH` prereq for the sole purpose
of allowing us to perform the non-trivial adjustments regarding the
`master` -> `main` rename before the automatable ones.
Now that the transition is almost complete, we can stop using it in most
instances. The only two exceptions are t5526 and t9902: at the time of
writing, there are other patches in flight that touch these test
scripts, therefore their transition to `main` is postponed to a later
date.
This patch is the result of this command:
sed -i 's/PREPARE_FOR_MAIN_BRANCH[ ,]//' t/t[0-9]*.sh &&
git checkout HEAD -- t/t5526\* t/t9902\*
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Carefully excluding t1309, which sees independent development elsewhere
at the time of writing, we transition above-mentioned tests to the
default branch name `main`. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -e 's/naster/nain/g' -- t[01]*.sh &&
git checkout HEAD -- t1309\*)
Note that t5533 contains a variation of the name `master` (`naster`)
that we rename here, too.
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In addition to the manual adjustment to let the `linux-gcc` CI job run
the test suite with `master` and then with `main`, this patch makes sure
that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts
that currently rely on the initial branch name being `master by default.
To determine which test scripts to mark up, the first step was to
force-set the default branch name to `master` in
- all test scripts that contain the keyword `master`,
- t4211, which expects `t/t4211/history.export` with a hard-coded ref to
initialize the default branch,
- t5560 because it sources `t/t556x_common` which uses `master`,
- t8002 and t8012 because both source `t/annotate-tests.sh` which also
uses `master`)
This trick was performed by this command:
$ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' $(git grep -l master t/t[0-9]*.sh) \
t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh
After that, careful, manual inspection revealed that some of the test
scripts containing the needle `master` do not actually rely on a
specific default branch name: either they mention `master` only in a
comment, or they initialize that branch specificially, or they do not
actually refer to the current default branch. Therefore, the
aforementioned modification was undone in those test scripts thusly:
$ git checkout HEAD -- \
t/t0027-auto-crlf.sh t/t0060-path-utils.sh \
t/t1011-read-tree-sparse-checkout.sh \
t/t1305-config-include.sh t/t1309-early-config.sh \
t/t1402-check-ref-format.sh t/t1450-fsck.sh \
t/t2024-checkout-dwim.sh \
t/t2106-update-index-assume-unchanged.sh \
t/t3040-subprojects-basic.sh t/t3301-notes.sh \
t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \
t/t3436-rebase-more-options.sh \
t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \
t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \
t/t5511-refspec.sh t/t5526-fetch-submodules.sh \
t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \
t/t5548-push-porcelain.sh \
t/t5552-skipping-fetch-negotiator.sh \
t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \
t/t5614-clone-submodules-shallow.sh \
t/t7508-status.sh t/t7606-merge-custom.sh \
t/t9302-fast-import-unpack-limit.sh
We excluded one set of test scripts in these commands, though: the range
of `git p4` tests. The reason? `git p4` stores the (foreign) remote
branch in the branch called `p4/master`, which is obviously not the
default branch. Manual analysis revealed that only five of these tests
actually require a specific default branch name to pass; They were
modified thusly:
$ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' t/t980[0167]*.sh t/t9811*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is currently possible to write multiple "start" commands into
git-update-ref(1) for a single session, but none of them except for the
first one actually have any effect.
Using such nested "start"s may eventually have a sensible effect. One
may imagine that it restarts the current transaction, effectively
emptying it and creating a new one. It may also allow for creation of
nested transactions. But currently, none of these are implemented.
Silently ignoring this misuse is making it hard to iterate in the future
if "start" is ever going to have meaningful semantics in such a context.
This commit thus makes sure to error out in case we see such use.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While git-update-ref has recently grown commands which allow interactive
control of transactions in e48cf33b61 (update-ref: implement interactive
transaction handling, 2020-04-02), it is not yet possible to create
multiple transactions in a single session. To do so, one currently still
needs to invoke the executable multiple times.
This commit addresses this shortcoming by allowing the "start" command
to create a new transaction if the current transaction has already been
either committed or aborted.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The testcase t1400 exercises the git-update-ref(1) utility. To do so,
many tests directly read and write references via the filesystem,
assuming that we always use loose and/or packed references. While this
is true now, it'll change with the introduction of the reftable backend.
Convert those tests to use git-update-ref(1) and git-show-ref(1) where
possible. Furthermore, two tests are converted to not delete HEAD
anymore, as this results in a broken repository. They've instead been
updated to create a non-mandatory symbolic reference and delete that
one instead.
Some tests remain which exercise behaviour with broken references, which
cannot currently be converted to use regular git tooling.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In addition to the trivial search-and-replace, there are three
non-trivial adjustments necessary.
Mark the respective test cases with the transitional prereq and make
those non-trivial adjustments early, to make this change easier to
review.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Further preliminary change to refs API.
* hn/reftable-prep-part-2:
Make HEAD a PSEUDOREF rather than PER_WORKTREE.
Modify pseudo refs through ref backend storage
t1400: use git rev-parse for testing PSEUDOREF existence
|
|
In the test scripts, the recommended style is, e.g.:
test_expect_success 'name' '
do-something somehow &&
do-some-more testing
'
When using this style, any single quote in the multi-line test section
is actually closing the lone single quotes that surround it.
It can be a non-issue in practice:
test_expect_success 'sed a little' '
sed -e 's/hi/lo/' in >out # "ok": no whitespace in s/hi/lo/
'
Or it can be a bug in the test, e.g., because variable interpolation
happens before the test even begins executing:
v=abc
test_expect_success 'variable interpolation' '
v=def &&
echo '"$v"' # abc
'
Change several such in-test single quotes to use double quotes instead
or, in a few cases, drop them altogether. These were identified using
some crude grepping. We're not fixing any test bugs here, but we're
hopefully making these tests slightly easier to grok and to maintain.
There are legitimate use cases for closing a quote and opening a new
one, e.g., both '\'' and '"'"' can be used to produce a literal single
quote. I'm not touching any of those here.
In t9401, tuck the redirecting ">" to the filename while we're touching
those lines.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous behavior was introduced in commit 74ec19d4be
("pseudorefs: create and use pseudoref update and delete functions",
Jul 31, 2015), with the justification "alternate ref backends still
need to store pseudorefs in GIT_DIR".
Refs such as REBASE_HEAD are read through the ref backend. This can
only work consistently if they are written through the ref backend as
well. Tooling that works directly on files under .git should be
updated to use git commands to read refs instead.
The following behaviors change:
* Updates to pseudorefs (eg. ORIG_HEAD) with
core.logAllRefUpdates=always will create reflogs for the pseudoref.
* non-HEAD pseudoref symrefs are also dereferenced on deletion. Update
t1405 accordingly.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This will allow these tests to run with alternative ref backends
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reading and writing .git/refs/* assumes that refs are stored in the 'files'
ref backend.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The commit-graph code exhausted file descriptors easily when it
does not have to.
* tb/commit-graph-fd-exhaustion-fix:
commit-graph: close descriptors after mmap
commit-graph.c: gracefully handle file descriptor exhaustion
t/test-lib.sh: make ULIMIT_FILE_DESCRIPTORS available to tests
commit-graph.c: don't use discarded graph_name in error
|
|
In t1400 the prerequisite 'ULIMIT_FILE_DESCRIPTORS' is defined and used
to effectively guard the helper function 'run_with_limited_open_files'
from being used on systems that do not satisfy this prerequisite.
In the subsequent patch, we will introduce another test outside of t1400
that would benefit from using this prerequisite. So, move it to
'test-lib.sh' instead so that it can be used by multiple tests.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The git-update-ref(1) command can only handle queueing transactions
right now via its "--stdin" parameter, but there is no way for users to
handle the transaction itself in a more explicit way. E.g. in a
replicated scenario, one may imagine a coordinator that spawns
git-update-ref(1) for multiple repositories and only if all agree that
an update is possible will the coordinator send a commit. Such a
transactional session could look like
> start
< start: ok
> update refs/heads/master $OLD $NEW
> prepare
< prepare: ok
# All nodes have returned "ok"
> commit
< commit: ok
or
> start
< start: ok
> create refs/heads/master $OLD $NEW
> prepare
< fatal: cannot lock ref 'refs/heads/master': reference already exists
# On all other nodes:
> abort
< abort: ok
In order to allow for such transactional sessions, this commit
introduces four new commands for git-update-ref(1), which matches those
we have internally already with the exception of "start":
- start: start a new transaction
- prepare: prepare the transaction, that is try to lock all
references and verify their current value matches the
expected one
- commit: explicitly commit a session, that is update references to
match their new expected state
- abort: abort a session and roll back all changes
By design, git-update-ref(1) will commit as soon as standard input is
being closed. While fine in a non-transactional world, it is definitely
unexpected in a transactional world. Because of this, as soon as any of
the new transactional commands is used, the default will change to
aborting without an explicit "commit". To avoid a race between queueing
updates and the first "prepare" that starts a transaction, the "start"
command has been added to start an explicit transaction.
Add some tests to exercise this new functionality.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are several error messages in get_oid() and its children that are
clearly intended for humans, but aren't marked for translation. E.g.:
$ git show :1:foo
fatal: Path 'foo' is in the index, but not at stage 1.
Did you mean ':0:foo'?
Let's mark these for translation. While we're at it, let's switch the
style to be more like our usual error messages: start with a lowercase
letter and omit a period at the end of the line.
This does mean that multi-line messages like the one above don't have
any punctuation between the two sentences. I solved that by adding a
"hint" marker like we'd see from advise(). So the result is:
$ git show :1:foo
fatal: path 'foo' is in the index, but not at stage 1
hint: Did you mean ':0:foo'?
A few tests had to be switched to test_i18ngrep and test_i18ncmp. Since
we were touching them anyway, I also simplified the ones using i18ngrep
a bit for readability.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using the shell "test" here is inflexible, because we can't easily swap
it out for an i18n-aware version like we can with test_cmp and
test_i18ncmp. And it's not even saving us any processes, since we have
to use "cat" to get the output. So let's switch to using test_cmp, which
has the added bonus that it will produce better output if there's a
failure.
Note that not all of the changed outputs here are candidates for
translation, but I've converted all of them for consistency and to
benefit from the better output.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test cleanup.
* rs/test-cleanup:
t7811: don't create unused file
t9300: don't create unused file
test: use test_must_be_empty F instead of test_cmp empty F
test: use test_must_be_empty F instead of test -z $(cat F)
t1400: use test_must_be_empty
t1410: use test_line_count
t1512: use test_line_count
|
|
Use test_must_be_empty instead of reading the file and comparing its
contents to an empty string. That's more efficient, as the function
only needs built-in meta-data only check in the usual case, and provides
nicer debug output otherwise.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Without this, you cannot use `--run=<...>` to skip that part, and a run
with `--run=0` (which is a common way to determine the test case number
corresponding to a given test case title).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test fix.
* ma/t1400-undebug-test:
t1400: drop debug `echo` to actually execute `test`
|
|
Various tests have been updated to make it easier to swap the
hash function used for object identification.
* bc/hash-independent-tests:
t5318: use test_oid for HASH_LEN
t1407: make hash size independent
t1406: make hash-size independent
t1405: make hash size independent
t1400: switch hard-coded object ID to variable
t1006: make hash size independent
t0064: make hash size independent
t0002: abstract away SHA-1 specific constants
t0000: update tests for SHA-256
t0000: use hash translation table
t: add test functions to translate hash-related values
|
|
Instead of running `test "foo" = "$(bar)"`, we prefix the whole thing
with `echo`. Comparing to nearby tests makes it clear that this is just
debug leftover. This line has actually been modified four times since it
was introduced in e52290428b (General ref log reading improvements.,
2006-05-19) and the `echo` has always survived. Let's finally drop it.
This script could need some more cleanups. This is just an immediate fix
so that we actually test what we intend to.
All other hits for `git grep "\<echo test " -- t/` seem fine. They want
to create some input or expected output data.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Switch a hard-coded all-zeros object ID to use a variable instead.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If passed both --no-deref and --stdin, update-ref would error out with a
general usage message that did not at all suggest these options were
incompatible. The manpage for update-ref did suggest through its
synopsis line that --no-deref and --stdin were incompatible, but it sadly
also incorrectly suggested that -d and --no-deref were incompatible. So
the help around the --no-deref option is buggy in a few ways.
The --stdin option did provide a different mechanism for avoiding
dereferencing symbolic-refs: adding a line reading
option no-deref
before every other directive in the input. (Technically, if the user
wants to do the extra work of first determining which refs they want to
update or delete are symbolic, then they only need to put the extra
"option no-deref" lines before the updates of those refs. But in some
cases, that's more work than just adding the "option no-deref" before
every other directive.)
It's easier to allow the user to just pass --no-deref along with --stdin
in order to tell update-ref that the user doesn't want any symbolic ref
to be dereferenced. It also makes the update-ref documentation simpler.
Implement that, and update the documentation to match.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many messages will be marked for translation in the following
commits. This commit updates some of them to be more consistent and
reduce diff noise in those commits. Changes are
- keep the first letter of die(), error() and warning() in lowercase
- no full stop in die(), error() or warning() if it's single sentence
messages
- indentation
- some messages are turned to BUG(), or prefixed with "BUG:" and will
not be marked for i18n
- some messages are improved to give more information
- some messages are broken down by sentence to be i18n friendly
(on the same token, combine multiple warning() into one big string)
- the trailing \n is converted to printf_ln if possible, or deleted
if not redundant
- errno_errno() is used instead of explicit strerror()
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many tests hardcode the raw object names, which would change once
we migrate away from SHA-1. While some of them must test against
exact object names, most of them do not have to use hardcoded
constants in the test. The latter kind of tests have been updated
to test the moral equivalent of the original without hardcoding the
actual object names.
* bc/hash-independent-tests: (28 commits)
t5300: abstract away SHA-1-specific constants
t4208: abstract away SHA-1-specific constants
t4045: abstract away SHA-1-specific constants
t4042: abstract away SHA-1-specific constants
t4205: sort log output in a hash-independent way
t/lib-diff-alternative: abstract away SHA-1-specific constants
t4030: abstract away SHA-1-specific constants
t4029: abstract away SHA-1-specific constants
t4029: fix test indentation
t4022: abstract away SHA-1-specific constants
t4020: abstract away SHA-1-specific constants
t4014: abstract away SHA-1-specific constants
t4008: abstract away SHA-1-specific constants
t4007: abstract away SHA-1-specific constants
t3905: abstract away SHA-1-specific constants
t3702: abstract away SHA-1-specific constants
t3103: abstract away SHA-1-specific constants
t2203: abstract away SHA-1-specific constants
t: skip pack tests if not using SHA-1
t4044: skip test if not using SHA-1
...
|
|
Switch all uses of $_z40 to $ZERO_OID so that they work correctly with
larger hashes. This commit was created by using the following sed
command to modify all files in the t directory except t/test-lib.sh:
sed -i 's/\$_z40/$ZERO_OID/g'
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
According to the documentation, it is possible to "specify 40 '0' or an
empty string as <oldvalue> to make sure that the ref you are creating
does not exist." But in the code for pseudorefs, we do not implement
this, as demonstrated by the failing tests added in the previous commit.
If we fail to read the old ref, we immediately die. But a failure to
read would actually be a good thing if we have been given the zero oid.
With the zero oid, allow -- and even require -- the ref-reading to fail.
This implements the "make sure that the ref ... does not exist" part of
the documentation and fixes both failing tests from the previous commit.
Since we have a `strbuf err` for collecting errors, let's use it and
signal an error to the caller instead of dying hard.
Reported-by: Rafael Ascensão <rafa.almas@gmail.com>
Helped-by: Rafael Ascensão <rafa.almas@gmail.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
