| Age | Commit message (Collapse) | Author |
|---|
|
Add a "test_hook" wrapper similar to the existing "test_config"
wrapper added in d960c47a881 (test-lib: add helper functions for
config, 2011-08-17).
This wrapper:
- Will clean up the hook with "test_when_finished", unless --setup is
provided.
- Will error if we clobber a hook, unless --clobber is provided.
- Takes a name like "update" instead of ".git/hooks/update".
- Accepts -C <dir>, like "test_config" and "test_commit".
By using a wrapper we'll be able to easily change all the hook-related
code that assumes that the template-created ".git/hooks" directory is
created by "init", "clone" etc. once another topic follows-up and
changes the test suite to stop creating trash directories using those
templates.
In addition this will make it easy to have the hooks configured using
the "configuration-based hooks" topic, once we get around to
integrating that. I.e. we'll be able to run the tests in a mode where
we sometimes create a .git/hooks/<name>, and other times create a
script in another location, and point the relevant configuration
snippet to it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove various redundant or obsolete code from the test_create_repo()
function, and split up its use in test-lib.sh from what tests need
from it.
This leave us with a pass-through wrapper for "git init" in
test-lib-functions.sh, in test-lib.sh we have the same, except for
needing to redirect stdout/stderr, and emitting an error ourselves if
it fails. We don't need to error() ourselves when test_create_repo()
is invoked, as the invocation will be a part of a test's "&&"-chain.
Everything below this paragraph is a detailed summary of the history
of test_create_repo() explaining why it's safe to remove the various
things it was doing:
1. "mkdir -p" isn't needed because "git init" itself will create
leading directories if needed.
2. Since we're now a simple wrapper for "git init" we don't need to
check that we have only one argument. If someone wants to run
"test_create_repo --bare x" that's OK.
3. We won't ever hit that "Cannot setup test environment"
error.
Checking the test environment sanity when doing "git init" dates
back to eea420693be (t0000: catch trivial pilot errors.,
2005-12-10) and 2ccd2027b01 (trivial: check, if t/trash directory
was successfully created, 2006-01-05).
We can also see it in another form a bit later in my own
0d314ce834d (test-lib: use subshell instead of cd $new && .. && cd
$old, 2010-08-30).
But since 2006f0adaee (t/test-lib: make sure Git has already been
built, 2012-09-17) we already check if we have a built git
earlier.
The one thing this was testing after that 2012 change was that
we'd just built "git", but not "git-init", but since
3af4c7156c4 (tests: respect GIT_TEST_INSTALLED when initializing
repositories, 2018-11-12) we invoke "git", not "git-init".
So all of that's been checked already, and we don't need to
re-check it here.
4. We don't need to move .git/hooks out of the way.
That dates back to c09a69a83e3 (Disable hooks during tests.,
2005-10-16), since then hooks became disabled by default in
f98f8cbac01 (Ship sample hooks with .sample suffix, 2008-06-24).
So the hooks were already disabled by default, but as can be seen
from "mkdir .git/hooks" changes various tests needed to re-setup
that directory. Now they no longer do.
This makes us implicitly depend on the default hooks being
disabled, which is a good thing. If and when we'd have any
on-by-default hooks (I see no reason we ever would) we'd want to
see the subtle and not so subtle ways that would break the test
suite.
5. We don't need to "cd" to the "$repo" directory at all anymore.
In the code being removed here we both "cd"'d to the repository
before calling "init", and did so in a subshell.
It's not important to do either, so both of those can be
removed. We cd'd because this code grew from test-lib.sh code
where we'd have done so already, see eedf8f97e58 (Abstract
test_create_repo out for use in tests., 2006-02-17), and later
"cd"'d inside a subshell since 0d314ce834d to avoid having to keep
track of an "old pwd" variable to cd back after the setup.
Being in the repository directory made moving the hooks around
easier (we wouldn't have to fully qualify the path). Since we're
not moving the hooks per #4 above we don't need to "cd" for that
reason either.
6. We can drop the --template argument and instead rely on the
GIT_TEMPLATE_DIR set to the same path earlier in test-lib.sh. See
8683a45d669 (Introduce GIT_TEMPLATE_DIR, 2006-12-19)
7. We only needed that ">&3 2>&4" redirection when invoked from
test-lib.sh.
We could still invoke test_create_repo() there, but as the
invocation is now trivial and we don't have a good reason to use
test_create_repo() elsewhere let's call "git init" there
ourselves.
8. We didn't need to resolve "git" as
"${GIT_TEST_INSTALLED:-$GIT_EXEC_PATH}/git$X" in test_create_repo(),
even for the use of test-lib.sh
PATH is already set up in test-lib.sh to start with
GIT_TEST_INSTALLED and/or GIT_EXEC_PATH before
test_create_repo() (now "git init") is called.. So we can simply
run "git" and rely on the PATH lookup choosing the right
executable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We `cat` files, but don't inspect or grab the contents in any way.
Unlike in an earlier commit, there is no reason to suspect that these
files could be missing, so `cat`-ing them is just wasted effort.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When bf1a11f0a1 (sideband: highlight keywords in remote sideband output,
2018-08-07) was introduced, it was carefully considered which strings
would be highlighted. However 59a255aef0 (sideband: do not read beyond
the end of input, 2018-08-18) brought in a regression that the original
did not test for. A line containing only the keyword and nothing else
("SUCCESS") should still be colored.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The caller of maybe_colorize_sideband() gives a counted buffer
<src, n>, but the callee checked src[] as if it were a NUL terminated
buffer. If src[] had all isspace() bytes in it, we would have made
n negative, and then
(1) made number of strncasecmp() calls to see if the remaining
bytes in src[] matched keywords, reading beyond the end of the
array (this actually happens even if n does not go negative),
and/or
(2) called strbuf_add() with negative count, most likely triggering
the "you want to use way too much memory" error due to unsigned
integer overflow.
Fix both issues by making sure we do not go beyond &src[n].
In the longer term we may want to accept size_t as parameter for
clarity (even though we know that a sideband message we are painting
typically would fit on a line on a terminal and int is sufficient).
Write it down as a NEEDSWORK comment.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The colorization is controlled with the config setting "color.remote".
Supported keywords are "error", "warning", "hint" and "success". They
are highlighted if they appear at the start of the line, which is
common in error messages, eg.
ERROR: commit is missing Change-Id
The Git push process itself prints lots of non-actionable messages
(eg. bandwidth statistics, object counters for different phases of the
process). This obscures actionable error messages that servers may
send back. Highlighting keywords in the sideband draws more attention
to those messages.
The background for this change is that Gerrit does server-side
processing to create or update code reviews, and actionable error
messages (eg. missing Change-Id) must be communicated back to the user
during the push. User research has shown that new users have trouble
seeing these messages.
The highlighting is done on the client rather than server side, so
servers don't have to grow capabilities to understand terminal escape
codes and terminal state. It also consistent with the current state
where Git is control of the local display (eg. prefixing messages with
"remote: ").
The highlighting can be configured using color.remote.<KEYWORD>
configuration settings. Since the keys are matched case insensitively,
we match the keywords case insensitively too.
Finally, this solution is backwards compatible: many servers already
prefix their messages with "error", and they will benefit from this
change without requiring a server update. By contrast, a server-side
solution would likely require plumbing the TERM variable through the
git protocol, so it would require changes to both server and client.
Helped-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
