| Age | Commit message (Collapse) | Author |
|---|
|
Introduce a --annotate-stdin that is functionally equivalent of --stdin.
--stdin does not behave as --stdin in other subcommands, such as
pack-objects whereby it takes one argument per line. Since --stdin can
be a confusing and misleading name, rename it to --annotate-stdin.
This change adds a warning to --stdin warning that it will be removed in
the future.
Signed-off-by: "John Cai" <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Carefully excluding t6300, which sees independent development elsewhere
at the time of writing, we use `main` as the default branch name in
t6[0-3]*. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t6[0-3]*.sh &&
git checkout HEAD -- t6300\*)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In addition to the manual adjustment to let the `linux-gcc` CI job run
the test suite with `master` and then with `main`, this patch makes sure
that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts
that currently rely on the initial branch name being `master by default.
To determine which test scripts to mark up, the first step was to
force-set the default branch name to `master` in
- all test scripts that contain the keyword `master`,
- t4211, which expects `t/t4211/history.export` with a hard-coded ref to
initialize the default branch,
- t5560 because it sources `t/t556x_common` which uses `master`,
- t8002 and t8012 because both source `t/annotate-tests.sh` which also
uses `master`)
This trick was performed by this command:
$ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' $(git grep -l master t/t[0-9]*.sh) \
t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh
After that, careful, manual inspection revealed that some of the test
scripts containing the needle `master` do not actually rely on a
specific default branch name: either they mention `master` only in a
comment, or they initialize that branch specificially, or they do not
actually refer to the current default branch. Therefore, the
aforementioned modification was undone in those test scripts thusly:
$ git checkout HEAD -- \
t/t0027-auto-crlf.sh t/t0060-path-utils.sh \
t/t1011-read-tree-sparse-checkout.sh \
t/t1305-config-include.sh t/t1309-early-config.sh \
t/t1402-check-ref-format.sh t/t1450-fsck.sh \
t/t2024-checkout-dwim.sh \
t/t2106-update-index-assume-unchanged.sh \
t/t3040-subprojects-basic.sh t/t3301-notes.sh \
t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \
t/t3436-rebase-more-options.sh \
t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \
t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \
t/t5511-refspec.sh t/t5526-fetch-submodules.sh \
t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \
t/t5548-push-porcelain.sh \
t/t5552-skipping-fetch-negotiator.sh \
t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \
t/t5614-clone-submodules-shallow.sh \
t/t7508-status.sh t/t7606-merge-custom.sh \
t/t9302-fast-import-unpack-limit.sh
We excluded one set of test scripts in these commands, though: the range
of `git p4` tests. The reason? `git p4` stores the (foreign) remote
branch in the branch called `p4/master`, which is obviously not the
default branch. Manual analysis revealed that only five of these tests
actually require a specific default branch name to pass; They were
modified thusly:
$ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' t/t980[0167]*.sh t/t9811*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Switch all uses of $_x40 to $OID_REGEX so that they work correctly with
larger hashes. This commit was created by using the following sed
command to modify all files in the t directory except t/test-lib.sh:
sed -i 's/\$_x40/$OID_REGEX/g'
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some tests call test_cmp, and if it fails show the actual
output generated. This is mostly pointless, as test_cmp will
already show a diff between the expected and actual output.
It also fools --chain-lint by putting an "||" in the middle
of the chain, so we'd rather not use this construct.
Note that these cases actually show a pre-processed version
of the data, rather than exactly what test_cmp would show.
However, test_cmp's output is generally good for pointing
the user in the right direction, and they can then dig in
the trash directory themselves if they want to see more
details.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These are tests which are missing a link in their &&-chain,
but during a setup phase. We may fail to notice failure in
commands that build the test environment, but these are
typically not expected to fail at all (but it's still good
to double-check that our test environment is what we
expect).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously, the default history treated bottom commits the same as any
other UNINTERESTING commit, which could force it down side branches.
Consider the following history:
*A--*B---D--*F * marks !TREESAME parent paths
\ /*
`-C-'
When requesting "B..F", B is UNINTERESTING but TREESAME to D. C is
!UNINTERESTING.
So default following would go from D into the irrelevant side branch C
to A, rather than to B. Note also that if there had been an extra
!UNINTERESTING commit B1 between B and D, it wouldn't have gone down C.
Change the default following to test relevant_commit() instead of
!UNINTERESTING, so it can proceed straight from D to B, thus finishing
the traversal of that path.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When using --parents or --children, get_commit_action() previously showed
all merges, even if TREESAME to both parents.
This was intended to tie together the topology of the rewritten parents,
but it was excessive - in fact we only need to show merges that have two
or more relevant parents. Merges at the boundary do not necessarily need
to be shown.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the BOTTOM flag to define relevance for pruning. Relevant commits
are those that are !UNINTERESTING or BOTTOM, and this allows us to
identify irrelevant side branches (UNINTERESTING && !BOTTOM).
If a merge has relevant parents, and it is TREESAME to them, then do not
let irrelevant parents cause the merge to be treated as !TREESAME.
When considering simplification, don't always include all merges -
merges with exactly one relevant parent can be simplified, if TREESAME
according to the above rule.
These two changes greatly increase simplification in limited, pruned
revision lists.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When simplifying an odd merge, such as one that used "-s ours", we may
find ourselves TREESAME to apparently redundant parents. Prevent
simplify_merges() from removing every TREESAME parent; if this would
happen reinstate the first TREESAME parent - the one that the default
log would have followed.
This avoids producing a totally disjoint history from the default log
when the default log is a better explanation of the end result, and aids
visualisation of odd merges.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
History simplification previously always treated merges as TREESAME
if they were TREESAME to any parent.
While this was consistent with the default behaviour, this could be
extremely unhelpful when searching detailed history, and could not be
overridden. For example, if a merge had ignored a change, as if by "-s
ours", then:
git log -m -p --full-history -Schange file
would successfully locate "change"'s addition but would not locate the
merge that resolved against it.
Futher, simplify_merges could drop the actual parent that a commit
was TREESAME to, leaving it as a normal commit marked TREESAME that
isn't actually TREESAME to its remaining parent.
Now redefine a commit's TREESAME flag to be true only if a commit is
TREESAME to _all_ of its parents. This doesn't affect either the default
simplify_history behaviour (because partially TREESAME merges are turned
into normal commits), or full-history with parent rewriting (because all
merges are output). But it does affect other modes. The clearest
difference is that --full-history will show more merges - sufficient to
ensure that -m -p --full-history log searches can really explain every
change to the file, including those changes' ultimate fate in merges.
Also modify simplify_merges to recalculate TREESAME after removing
a parent. This is achieved by storing per-parent TREESAME flags on the
initial scan, so the combined flag can be easily recomputed.
This fixes some t6111 failures, but creates a couple of new ones -
we are now showing some merges that don't need to be shown.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some side branching and odd merging to illustrate various flaws in
revision list scans, particularly when limiting the list.
Many expected failures, which will be gone by the end of the "history
traversal refinements" series.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
