| Age | Commit message (Collapse) | Author |
|---|
|
They are equivalents and the former still exists, so as long as the
only change this commit makes are to rewrite test_i18ngrep to
test_grep, there won't be any new bug, even if there still are
callers of test_i18ngrep remaining in the tree, or when merged to
other topics that add new uses of test_i18ngrep.
This patch was produced more or less with
git grep -l -e 'test_i18ngrep ' 't/t[0-9][0-9][0-9][0-9]-*.sh' |
xargs perl -p -i -e 's/test_i18ngrep /test_grep /'
and a good way to sanity check the result yourself is to run the
above in a checkout of c4603c1c (test framework: further deprecate
test_i18ngrep, 2023-10-31) and compare the resulting working tree
contents with the result of applying this patch to the same commit.
You'll see that test_i18ngrep in a few t/lib-*.sh files corrected,
in addition to the manual reproduction.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some tests still use the old format with four spaces indentation.
Standardize the tests to the new format with tab indentation.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the verify_mergeheads() helper the check the exit code of "git
rev-parse".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If a merge failed and we are leaving conflicts in the working directory
for the user to resolve, we should not attempt to apply any autostash.
Further, if we fail to apply the autostash (because either the merge
failed, or the user requested --no-commit), then we should instruct the
user how to apply it later.
Add a testcase verifying we have corrected this behavior.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Failures within `for` and `while` loops can go unnoticed if not detected
and signaled manually since the loop itself does not abort when a
contained command fails, nor will a failure necessarily be detected when
the loop finishes since the loop returns the exit code of the last
command it ran on the final iteration, which may not be the command
which failed. Therefore, detect and signal failures manually within
loops using the idiom `|| return 1` (or `|| exit 1` within subshells).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove untracked files that are unwanted after they are done being used.
While the set of cases in this patch is certainly far from
comprehensive, it was motivated by some work to see what the fallout
would be if we were to make the removal of untracked files as a side
effect of other commands into an error. Some cases were a bit more
involved than the testcase changes included in this patch, but the ones
included here represent the simple cases. While this patch is not that
important since we are not changing the behavior of those other commands
into an error in the near term, I thought these changes were useful
anyway as an explicit documentation of the intent that these untracked
files are no longer useful.
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Acked-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 'git merge' learned '--autostash' in a03b55530a (merge: teach
--autostash option, 2020-04-07), 'cmd_merge', once it is determined that
we have to create a merge commit, calls 'create_autostash' if
'--autostash' is given.
As explained in a03b55530a, and made more abvious by the tests added in
that commit, the autostash is then applied if the merge succeeds, either
directly or by committing (after conflict resolution or if '--no-commit'
was given), or if the merge is aborted with 'git merge --abort'. In some
other cases, like the user calling 'git reset --merge' or 'git merge
--quit', the autostash is not applied, but saved in the stash list.
However, there exists a scenario that creates an autostash but does not
apply nor save it to the stash list: if the chosen merge strategy
completely fails to handle the merge, i.e. 'try_merge_strategy' returns
2.
Apply the autostash in that case also. An easy way to test that is to
try to merge more than two commits but explicitely ask for the 'recursive'
merge strategy.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 'git merge' learned '--autostash' in a03b55530a (merge: teach
--autostash option, 2020-04-07), 'cmd_merge', in the fast-forward case,
calls 'create_autostash' before calling 'checkout_fast_forward' if
'--autostash' is given.
However, if 'checkout_fast_forward' fails, the autostash is not applied
to the working tree, nor saved in the stash list, since the code simply
calls 'goto done'.
Be more helpful to the user by applying the autostash in that case.
An easy way to test a failing fast-forward is when we are merging a
branch that has a tracked file that conflicts with an untracked file in
the working tree.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As a follow-up to d162b25f956 (tests: remove support for
GIT_TEST_GETTEXT_POISON, 2021-01-20) remove most uses of test_i18ncmp
via a simple s/test_i18ncmp/test_cmp/g search-replacement.
I'm leaving t6300-for-each-ref.sh out due to a conflict with in-flight
changes between "master" and "seen", as well as the prerequisite
itself due to other changes between "master" and "next/seen" which add
new test_i18ncmp uses.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Excluding t7817, which is added in an unrelated patch series at the time
of writing, this adjusts t7[5-9]*. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t7[5-9]*.sh)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In addition to the manual adjustment to let the `linux-gcc` CI job run
the test suite with `master` and then with `main`, this patch makes sure
that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts
that currently rely on the initial branch name being `master by default.
To determine which test scripts to mark up, the first step was to
force-set the default branch name to `master` in
- all test scripts that contain the keyword `master`,
- t4211, which expects `t/t4211/history.export` with a hard-coded ref to
initialize the default branch,
- t5560 because it sources `t/t556x_common` which uses `master`,
- t8002 and t8012 because both source `t/annotate-tests.sh` which also
uses `master`)
This trick was performed by this command:
$ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' $(git grep -l master t/t[0-9]*.sh) \
t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh
After that, careful, manual inspection revealed that some of the test
scripts containing the needle `master` do not actually rely on a
specific default branch name: either they mention `master` only in a
comment, or they initialize that branch specificially, or they do not
actually refer to the current default branch. Therefore, the
aforementioned modification was undone in those test scripts thusly:
$ git checkout HEAD -- \
t/t0027-auto-crlf.sh t/t0060-path-utils.sh \
t/t1011-read-tree-sparse-checkout.sh \
t/t1305-config-include.sh t/t1309-early-config.sh \
t/t1402-check-ref-format.sh t/t1450-fsck.sh \
t/t2024-checkout-dwim.sh \
t/t2106-update-index-assume-unchanged.sh \
t/t3040-subprojects-basic.sh t/t3301-notes.sh \
t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \
t/t3436-rebase-more-options.sh \
t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \
t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \
t/t5511-refspec.sh t/t5526-fetch-submodules.sh \
t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \
t/t5548-push-porcelain.sh \
t/t5552-skipping-fetch-negotiator.sh \
t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \
t/t5614-clone-submodules-shallow.sh \
t/t7508-status.sh t/t7606-merge-custom.sh \
t/t9302-fast-import-unpack-limit.sh
We excluded one set of test scripts in these commands, though: the range
of `git p4` tests. The reason? `git p4` stores the (foreign) remote
branch in the branch called `p4/master`, which is obviously not the
default branch. Manual analysis revealed that only five of these tests
actually require a specific default branch name to pass; They were
modified thusly:
$ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' t/t980[0167]*.sh t/t9811*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the test scripts, the recommended style is, e.g.:
test_expect_success 'name' '
do-something somehow &&
do-some-more testing
'
When using this style, any single quote in the multi-line test section
is actually closing the lone single quotes that surround it.
It can be a non-issue in practice:
test_expect_success 'sed a little' '
sed -e 's/hi/lo/' in >out # "ok": no whitespace in s/hi/lo/
'
Or it can be a bug in the test, e.g., because variable interpolation
happens before the test even begins executing:
v=abc
test_expect_success 'variable interpolation' '
v=def &&
echo '"$v"' # abc
'
Change several such in-test single quotes to use double quotes instead
or, in a few cases, drop them altogether. These were identified using
some crude grepping. We're not fixing any test bugs here, but we're
hopefully making these tests slightly easier to grok and to maintain.
There are legitimate use cases for closing a quote and opening a new
one, e.g., both '\'' and '"'"' can be used to produce a literal single
quote. I'm not touching any of those here.
In t9401, tuck the redirecting ">" to the filename while we're touching
those lines.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit 489947cee5095b168cbac111ff7bd1eadbbd90dd, which
stopped treating merges into the 'master' branch as special when
preparing the default merge message. As the goal was not to have
any single branch designated as special, it solved it by leaving the
"into <branchname>" at the end of the title of the default merge
message for any and all branches. An obvious and easy alternative
to treat everybody equally could have been to remove it for every
branch, but that involves loss of information.
We'll introduce a new mechanism to let end-users specify merges into
which branches would omit the "into <branchname>" from the title of
the default merge message, and make the mechanism, when unconfigured,
treat the traditional 'master' special again, so all the changes to
the tests we made earlier will become unnecessary, as these tests
will be run without configuring the said new mechanism.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the context of many projects renaming their primary branch names away
from `master`, Git wants to stop treating the `master` branch specially.
Let's start with `git fmt-merge-msg`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In rebase, one can pass the `--autostash` option to cause the worktree
to be automatically stashed before continuing with the rebase. This
option is missing in merge, however.
Implement the `--autostash` option and corresponding `merge.autoStash`
option in merge which stashes before merging and then pops after.
This option is useful when a developer has some local changes on a topic
branch but they realize that their work depends on another branch.
Previously, they had to run something like
git fetch ...
git stash push
git merge FETCH_HEAD
git stash pop
but now, that is reduced to
git fetch ...
git merge --autostash FETCH_HEAD
When an autostash is generated, it is automatically reapplied to the
worktree only in three explicit situations:
1. An incomplete merge is commit using `git commit`.
2. A merge completes successfully.
3. A merge is aborted using `git merge --abort`.
In all other situations where the merge state is removed using
remove_merge_branch_state() such as aborting a merge via
`git reset --hard`, the autostash is saved into the stash reflog
instead keeping the worktree clean.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Suggested-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In t7600, we were rewriting `printf '%s\n' ...` to create files from
parameters, one per line. However, we already have a function that wraps
this for us: test_write_lines(). Rewrite these instances to use that
function instead of open coding it.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git merge --squash" is designed to update the working tree and the
index without creating the commit, and this cannot be countermanded
by adding the "--commit" option; the command now refuses to work
when both options are given.
* vv/merge-squash-with-explicit-commit:
merge: refuse --commit with --squash
|
|
Improve the code to show args with potential typo that cannot be
interpreted as a commit-ish.
* jk/help-unknown-ref-fix:
help_unknown_ref(): check for refname ambiguity
help_unknown_ref(): duplicate collected refnames
|
|
"git merge" learned "--quit" option that cleans up the in-progress
merge while leaving the working tree and the index still in a mess.
* nd/merge-quit:
merge: add --quit
merge: remove drop_save() in favor of remove_merge_branch_state()
|
|
Convert option_commit to tristate, representing the states of
'default/untouched', 'enabled-by-cli', 'disabled-by-cli'. With this in
place, check whether option_commit was enabled by cli when squashing a
merge. If so, error out, as this is not supported.
Previously, when --squash was supplied, 'option_commit' was silently
dropped. This could have been surprising to a user who tried to override
the no-commit behavior of squash using --commit explicitly.
Add a note to the --squash option for git-merge to clarify the
incompatibility, and add a test case to t7600-merge.sh
Cc: Junio C Hamano <gitster@pobox.com>
Cc: Rafael Ascensão <rafa.almas@gmail.com>
Cc: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Vishal Verma <vishal@stellar.sh>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This allows to cancel the current merge without resetting worktree/index,
which is what --abort is for. Like other --quit(s), this is often used
when you forgot that you're in the middle of a merge and already
switched away, doing different things. By the time you've realized, you
can't even continue the merge anymore.
This also makes all in-progress commands, am, merge, rebase, revert and
cherry-pick, take all three --abort, --continue and --quit (bisect has a
different UI).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the user asks to merge "foo" and we suggest "origin/foo" instead,
we do so by simply chopping off "refs/remotes/" from the front of the
suggested ref. This is usually fine, but it's possible that the
resulting name is ambiguous (e.g., you have "refs/heads/origin/foo",
too).
Let's use shorten_unambiguous_ref() to do this the right way, which
should usually yield the same "origin/foo", but "remotes/origin/foo" if
necessary.
Note that in this situation there may be other options (e.g., we could
suggest "heads/origin/foo" as well). I'll leave that up for debate; the
focus here is just to avoid giving advice that does not actually do what
we expect.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "git merge" sees an unknown refname, we iterate through the refs to
try to suggest some possible alternates. We do so with for_each_ref(),
and in the callback we add some of the refnames we get to a
string_list that is declared with NODUP, directly adding a pointer into
the refname string our callback received.
But the for_each_ref() machinery does not promise that the refname
string will remain valid, and as a result we may print garbage memory.
The code in question dates back to its inception in e56181060e (help:
add help_unknown_ref(), 2013-05-04). But back then, the refname strings
generally did remain stable, at least immediately after the
for_each_ref() call. Later, in d1cf15516f (packed_ref_iterator_begin():
iterate using `mmapped_ref_iterator`, 2017-09-25), we started
consistently re-using a separate buffer for packed refs.
The fix is simple: duplicate the strings we intend to collect. We
already call string_list_clear(), so the memory is correctly freed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This fixes a bug where the scissors line is placed after the Conflicts:
section, in the case where a merge conflict occurs and
commit.cleanup = scissors.
Next, if commit.cleanup = scissors is specified, don't produce a
scissors line in commit if one already exists in the MERGE_MSG file.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Clean up the 'merge --squash c3 with c7' test by removing some
unnecessary braces and removing a pipe.
Also, generally cleanup style by unindenting a here-doc, removing stray
spaces after a redirection operator and allowing sed to open its own
input instead of redirecting input from the shell.
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using 'test_must_be_empty' is shorter and more idiomatic than
>empty &&
test_cmp empty out
as it saves the creation of an empty file. Furthermore, sometimes the
expected empty file doesn't have such a descriptive name like 'empty',
and its creation is far away from the place where it's finally used
for comparison (e.g. in 't7600-merge.sh', where two expected empty
files are created in the 'setup' test, but are used only about 500
lines later).
These cases were found by instrumenting 'test_cmp' to error out the
test script when it's used to compare empty files, and then converted
manually.
Note that even after this patch there still remain a lot of cases
where we use 'test_cmp' to check empty files:
- Sometimes the expected output is not hard-coded in the test, but
'test_cmp' is used to ensure that two similar git commands produce
the same output, and that output happens to be empty, e.g. the
test 'submodule update --merge - ignores --merge for new
submodules' in 't7406-submodule-update.sh'.
- Repetitive common tasks, including preparing the expected results
and running 'test_cmp', are often extracted into a helper
function, and some of this helper's callsites expect no output.
- For the same reason as above, the whole 'test_expect_success'
block is within a helper function, e.g. in 't3070-wildmatch.sh'.
- Or 'test_cmp' is invoked in a loop, e.g. the test 'cvs update
(-p)' in 't9400-git-cvsserver-server.sh'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Long time ago at fab47d05 ("merge: force edit and no-ff mode when
merging a tag object", 2011-11-07), "git merge" was made to always
create a merge commit when merging a tag, even when the side branch
being merged is a descendant of the current branch.
This default is good for merges made by upstream maintainers to
integrate work signed by downstream contributors, but will leave
pointless no-ff merges when downstream contributors pull a newer
release tag to make their long-running topic branches catch up with
the upstream. When there is no local work left on the topic, such a
merge should simply fast-forward to the commit pointed at by the
release tag.
Update the default (again) for "git merge" that merges a tag object
to (1) --no-ff (i.e. create a merge commit even when side branch
fast forwards) if the tag being merged is not at its expected place
in refs/tags/ hierarchy and (2) --ff (i.e. allow fast-forward update
when able) otherwise.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix the argument order for test_cmp. When given the expected
result first the diff shows the actual output with '+' and the
expectation with '-', which is the convention for our tests.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the `git merge` process is killed while waiting for the editor to
finish, the merge state is lost but the prepared merge msg and tree is kept.
So, a subsequent `git commit` creates a squashed merge even when the
user asked for proper merge commit originally.
Demonstrate the problem with a test crafted after the in t7502. The test
requires EXECKEEPSPID (thus does not run under MINGW).
Save the merge state earlier (in the non-squash case) so that it does
not get lost. This makes the test pass.
Reported-by: hIpPy <hippy2981@gmail.com>
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Like '--continue', the '--abort' option doesn't make any sense with
other options or arguments to 'git merge' so ensure that none are
present.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach 'git merge' the --continue option which allows 'continuing' a
merge by completing it. The traditional way of completing a merge after
resolving conflicts is to use 'git commit'. Now with commands like 'git
rebase' and 'git cherry-pick' having a '--continue' option adding such
an option to 'git merge' presents a consistent UI.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git merge FETCH_HEAD" dereferenced NULL pointer when merging
nothing into an unborn history (which is arguably unusual usage,
which perhaps was the reason why nobody noticed it).
* jv/merge-nothing-into-void:
merge: fix NULL pointer dereference when merging nothing into void
|
|
When "git merge --squash" stopped due to conflict, the concluding
"git commit" failed to read in the SQUASH_MSG that shows the log
messages from all the squashed commits.
* ss/commit-squash-msg:
commit: do not lose SQUASH_MSG contents
|
|
When we are on an unborn branch and merging only one foreign parent,
we allow "git merge" to fast-forward to that foreign parent commit.
This codepath incorrectly attempted to dereference the list of
parents that the merge is going to record even when the list is
empty. It must refuse to operate instead when there is no parent.
All other codepaths make sure the list is not empty before they
dereference it, and are safe.
Reported-by: Jose Ivan B. Vilarouca Filho
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When concluding a conflicted "git merge --squash", the command
failed to read SQUASH_MSG that was prepared by "git merge", and
showed only the "# Conflicts:" list of conflicted paths.
Place the contents from SQUASH_MSG at the beginning, just like we
show the commit log skeleton first when concluding a normal merge,
and then show the "# Conflicts:" list, to help the user write the
log message for the resulting commit.
Test by Junio C Hamano <gitster@pobox.com>.
Signed-off-by: Sven Strickroth <sven@cs-ware.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git merge-file" tried to signal how many conflicts it found, which
obviously would not work well when there are too many of them.
* jk/merge-file-exit-code:
merge-file: clamp exit code to maximum 127
|
|
Git-merge-file is documented to return one of three exit
codes:
- zero means the merge was successful
- a negative number means an error occurred
- a positive number indicates the number of conflicts
Unfortunately, this all gets stuffed into an 8-bit return
code. Which means that if you have 256 conflicts, this wraps
to zero, and the merge appears to succeed (and commits a
blob full of conflict-marker cruft!).
This patch clamps the return value to a maximum of 127,
which we should be able to safely represent everywhere. This
also leaves 128-255 for other values. Shells (and some parts
of git) will typically represent signal death as 128 plus
the signal number. And negative values are typically coerced
to an 8-bit unsigned value (so "return -1" ends up as 255).
Technically negative returns have the same problem (e.g.,
"-256" wraps back to 0), but this is not a problem in
practice, as the only negative value we use is "-1".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These are tests which are missing a link in their &&-chain,
but during a setup phase. We may fail to notice failure in
commands that build the test environment, but these are
typically not expected to fail at all (but it's still good
to double-check that our test environment is what we
expect).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When git show -s is called for merge commit it prints extra newline
after any merge commit. This differs from output for commits with one
parent. Fix it by more thorough checking that diff output is disabled.
The code in question exists since commit 3969cf7db1. The additional
newline is really needed for cases when patch is requested, test
t4013-diff-various.sh contains cases which can demonstrate behavior when
the condition is restricted further.
Tests:
Added merge commit to 'set up a bit of history' case in t7007-show.sh to
cover the fix.
Existing tests are updated to demonstrate the new behaviour. Earlier,
the tests that used "git show -s --pretty=format:%s", even though
"--pretty=format:%s" calls for item separator semantics and does not ask
for the terminating newline after the last item, expected the output to
end with such a newline. They were relying on the buggy behaviour. Use
of "--format=%s", which is equivalent to "--pretty=tformat:%s" that asks
for a terminating newline after each item, is a more realistic way to
use the command.
In the test 'merge log messages' the expected data is changed, because
it was explicitly listing the extra newline. Also the msg.nologff and
msg.nolognoff expected files are replaced by one msg.nolog, because they
were diffing because of the bug, and now there should be no difference.
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Spotted by Ram, confirmed by Miklos.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These three options mean "favor fast-forwarding when possible,
without creating an unnecessary merge", "never fast-forward and
always create a merge commit even when the commit being merged is a
strict descendant", and "we do not want to create any merge commit;
update only when the merged commit is a strict descendant".
They are "pick one out of these three possibilities" options, and
correspond to "merge.ff" configuration that is tri-state (yes, no
and only).
However, the implementation did not follow the usual convention for
the command line options (later one wins, and command line overrides
what is in the configuration).
Fix this by consolidating two variables (fast_forward_only and
allow_fast_forward) used in the implementation into one enum that
can take one of the three possible values.
Signed-off-by: Miklos Vajna <vmiklos@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* vl/typofix:
random typofixes (committed missing a 't', successful missing an 's')
|
|
Signed-off-by: Veres Lajos <vlajos@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Tests are modified to assume default configuration at entry,
and to reset the modified configuration variables at the end.
Test 'merge log message' was relying on the presence of option `--no-ff`
in the configuration. With the option, git show -s --pretty=format:%b HEAD
produces an empty line and without the option, it produces an empty file.
The test is modified to check with and without `--no-ff` option.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the i18n-specific test functions in test scripts for parseopt tests.
This issue was was introduced in v1.7.10.1-488-g54e6d:
54e6d i18n: parseopt: lookup help and argument translations when showing usage
and been broken under GETTEXT_POISON=YesPlease since.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the user explicitly asked us not to, don't launch an editor.
But do everything else the same way as the "edit" case, i.e. leave the
comment with verification result in the log template and record the
mergesig in the resulting merge commit for later inspection.
Based on initiail analysis by Jonathan Nieder.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Starting at release v1.7.9, if you ask to merge a signed tag, "git merge"
always creates a merge commit, even when the tag points at a commit that
happens to be a descendant of your current commit.
Unfortunately, this interacts rather badly for people who use --ff-only to
make sure that their branch is free of local developments. It used to be
possible to say:
$ git checkout -b frotz v1.7.9~30
$ git merge --ff-only v1.7.9
and expect that the resulting tip of frotz branch matches v1.7.9^0 (aka
the commit tagged as v1.7.9), but this fails with the updated Git with:
fatal: Not possible to fast-forward, aborting.
because a merge that merges v1.7.9 tag to v1.7.9~30 cannot be created by
fast forwarding.
We could teach users that now they have to do
$ git merge --ff-only v1.7.9^0
but it is far more pleasant for users if we DWIMmed this ourselves.
When an integrator pulls in a topic from a lieutenant via a signed tag,
even when the work done by the lieutenant happens to fast-forward, the
integrator wants to have a merge record, so the integrator will not be
asking for --ff-only when running "git pull" in such a case. Therefore,
this change should not regress the support for the use case v1.7.9 wanted
to add.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Otherwise, "git commit" wouldn't have a way to tell that we were in the
middle of merging an annotated or signed tag, not a plain commit, after
"git merge" stops to ask the user to resolve conflicts.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This also updates the autogenerated merge title message from "merge commit X"
to "merge tag X", and its effect can be seen in the changes to the test suite.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Implemented internally instead of as "git merge --no-commit && git commit"
so that "merge --edit" is otherwise consistent (hooks, etc) with "merge".
Note: the edit message does not include the status information that one
gets with "commit --status" and it is cleaned up after editing like one
gets with "commit --cleanup=default". A later patch could add the status
information if desired.
Note: previously we were not calling stripspace() after running the
prepare-commit-msg hook. Now we are, stripping comments and
leading/trailing whitespace lines if --edit is given, otherwise only
stripping leading/trailing whitespace lines if not given --edit.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
