| Age | Commit message (Collapse) | Author |
|---|
|
Introduce a new extension "refstorage" so that we can mark a
repository that uses a non-default ref backend, like reftable.
* ps/refstorage-extension:
t9500: write "extensions.refstorage" into config
builtin/clone: introduce `--ref-format=` value flag
builtin/init: introduce `--ref-format=` value flag
builtin/rev-parse: introduce `--show-ref-format` flag
t: introduce GIT_TEST_DEFAULT_REF_FORMAT envvar
setup: introduce GIT_DEFAULT_REF_FORMAT envvar
setup: introduce "extensions.refStorage" extension
setup: set repository's formats on init
setup: start tracking ref storage format
refs: refactor logic to look up storage backends
worktree: skip reading HEAD when repairing worktrees
t: introduce DEFAULT_REPO_FORMAT prereq
|
|
"git status" is taught to show both the branch being bisected and
being rebased when both are in effect at the same time.
* rj/status-bisect-while-rebase:
status: fix branch shown when not only bisecting
|
|
When calling `git init --separate-git-dir=<new-path>` on a preexisting
repository, we move the Git directory of that repository to the new path
specified by the user. If there are worktrees present in the repository,
we need to repair the worktrees so that their gitlinks point to the new
location of the repository.
This repair logic will load repositories via `get_worktrees()`, which
will enumerate up and initialize all worktrees. Part of initialization
is logic that we resolve their respective worktree HEADs, even though
that information may not actually be needed in the end by all callers.
Although not a problem presently with the file-based reference backend,
it will become a problem with the upcoming reftable backend. In the
context of git-init(1) we do not have a fully-initialized repository set
up via `setup_git_directory()` or friends. Consequently, we do not know
about the repository format when `repair_worktrees()` is called, and
properly setting up all parts of the repositroy in `init_db()` before we
try to repair worktrees is not an easy task. With the introduction of
the reftable backend, we would ultimately try to look up the worktree
HEADs before we have figured out the reference format, which does not
work.
We do not require the worktree HEADs at all to repair worktrees. So
let's fix this issue by skipping over the step that reads them.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 83c750acde (wt-status.*: better advice for git status added,
2012-06-05), git-status received new informative messages to describe
the ongoing work in a worktree.
These messages were enhanced in 0722c805d6 (status: show the branch name
if possible in in-progress info, 2013-02-03), to show, if possible, the
branch where the operation was initiated.
Since then, we show incorrect information when several operations are in
progress and one of them is bisect:
$ git checkout -b foo
$ GIT_SEQUENCE_EDITOR='echo break >' git rebase -i HEAD~
$ git checkout -b bar
$ git bisect start
$ git status
...
You are currently editing a commit while rebasing branch 'bar' on '...'.
You are currently bisecting, started from branch 'bar'.
...
Note that we erroneously say "while rebasing branch 'bar'" when we
should be referring to "foo".
This must have gone unnoticed for so long because it must be unusual to
start a bisection while another operation is in progress. And even less
usual to involve different branches.
It caught my attention reviewing a leak introduced in 8b87cfd000
(wt-status: move strbuf into read_and_strip_branch(), 2013-03-16).
A simple change to deal with this situation can be to record in struct
wt_status_state, the branch where the bisect starts separately from the
branch related to other operations.
Let's do it and so we'll be able to display correct information and
we'll avoid the leak as well.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The noop repair callback unsurprisingly does not look at any of its
parameters. Mark them as unused to silence -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Further shuffling of declarations across header files to streamline
file dependencies.
* cw/compat-util-header-cleanup:
git-compat-util: move alloc macros to git-compat-util.h
treewide: remove unnecessary includes for wrapper.h
kwset: move translation table from ctype
sane-ctype.h: create header for sane-ctype macros
git-compat-util: move wrapper.c funcs to its header
git-compat-util: move strbuf.c funcs to its header
|
|
Reduce reliance on a global state in the config reading API.
* gc/config-context:
config: pass source to config_parser_event_fn_t
config: add kvi.path, use it to evaluate includes
config.c: remove config_reader from configsets
config: pass kvi to die_bad_number()
trace2: plumb config kvi
config.c: pass ctx with CLI config
config: pass ctx with config files
config.c: pass ctx in configsets
config: add ctx arg to config_fn_t
urlmatch.h: use config_fn_t type
config: inline git_color_default_config
|
|
alloc_nr, ALLOC_GROW, and ALLOC_GROW_BY are commonly used macros for
dynamic array allocation. Moving these macros to git-compat-util.h with
the other alloc macros focuses alloc.[ch] to allocation for Git objects
and additionally allows us to remove inclusions to alloc.h from files
that solely used the above macros.
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Plumb "struct key_value_info" through all code paths that end in
die_bad_number(), which lets us remove the helper functions that read
analogous values from "struct config_reader". As a result, nothing reads
config_reader.config_kvi any more, so remove that too.
In config.c, this requires changing the signature of
git_configset_get_value() to 'return' "kvi" in an out parameter so that
git_configset_get_<type>() can pass it to git_config_<type>(). Only
numeric types will use "kvi", so for non-numeric types (e.g.
git_configset_get_string()), pass NULL to indicate that the out
parameter isn't needed.
Outside of config.c, config callbacks now need to pass "ctx->kvi" to any
of the git_config_<type>() functions that parse a config string into a
number type. Included is a .cocci patch to make that refactor.
The only exceptional case is builtin/config.c, where git_config_<type>()
is called outside of a config callback (namely, on user-provided input),
so config source information has never been available. In this case,
die_bad_number() defaults to a generic, but perfectly descriptive
message. Let's provide a safe, non-NULL for "kvi" anyway, but make sure
not to change the message.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This also made it clear that several .c files that depended upon path.h
were missing a #include for it; add the missing includes while at it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move 'repository_format_worktree_config' out of the global scope and into
the 'repository' struct. This change is similar to how
'repository_format_partial_clone' was moved in ebaf3bcf1ae (repository: move
global r_f_p_c to repo struct, 2021-06-17), adding it to the 'repository'
struct and updating 'setup.c' & 'repository.c' functions to assign the value
appropriately.
The primary goal of this change is to be able to load the worktree config of
a submodule depending on whether that submodule - not its superproject - has
'extensions.worktreeConfig' enabled. To ensure 'do_git_config_sequence()'
has access to the newly repo-scoped configuration, add a 'struct repository'
argument to 'do_git_config_sequence()' and pass it the 'repo' value from
'config_with_options()'.
Finally, add/update tests in 't3007-ls-files-recurse-submodules.sh' to
verify 'extensions.worktreeConfig' is read an used independently by
superprojects and submodules.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By moving several declarations to setup.h, the previous patch made it
possible to remove the include of cache.h in several source files. Do
so.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is another step towards letting us remove the include of cache.h in
strbuf.c. It does mean that we also need to add includes of abspath.h
in a number of C files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Ever since a64215b6cd ("object.h: stop depending on cache.h; make
cache.h depend on object.h", 2023-02-24), we have a few headers that
could have replaced their include of cache.h with an include of
object.h. Make that change now.
Some C files had to start including cache.h after this change (or some
smaller header it had brought in), because the C files were depending
on things from cache.h but were only formerly implicitly getting
cache.h through one of these headers being modified in this patch.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A few subcommands have been taught to stop users from working on a
branch that is being used in another worktree linked to the same
repository.
* rj/avoid-switching-to-already-used-branch:
switch: reject if the branch is already checked out elsewhere (test)
rebase: refuse to switch to a branch already checked out elsewhere (test)
branch: fix die_if_checked_out() when ignore_current_worktree
worktree: introduce is_shared_symref()
|
|
In 8d9fdd7 (worktree.c: check whether branch is rebased in another
worktree, 2016-04-22) die_if_checked_out() learned a new option
ignore_current_worktree, to modify the operation from "die() if the
branch is checked out in any worktree" to "die() if the branch is
checked out in any worktree other than the current one".
Unfortunately we implemented it by checking the flag is_current in the
worktree that find_shared_symref() returns.
When the same branch is checked out in several worktrees simultaneously,
find_shared_symref() will return the first matching worktree in the list
composed by get_worktrees(). If one of the worktrees with the checked
out branch is the current worktree, find_shared_symref() may or may not
return it, depending on the order in the list.
Instead of find_shared_symref(), let's do the search using use the
recently introduced API is_shared_symref(), and consider
ignore_current_worktree when necessary.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a new function, is_shared_symref(), which contains the heart of
find_shared_symref(). Refactor find_shared_symref() to use the new
function is_shared_symref().
Soon, we will use is_shared_symref() to search for symref beyond
the first worktree that matches.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This allows us to replace includes of cache.h with includes of the much
smaller alloc.h in many places. It does mean that we also need to add
includes of alloc.h in a number of C files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The logic to handle worktree refs (worktrees/NAME/REF and
main-worktree/REF) existed in two places:
* ref_type() in refs.c
* parse_worktree_ref() in worktree.c
Collapse this logic together in one function parse_worktree_ref():
this avoids having to cross-check the result of parse_worktree_ref()
and ref_type().
Introduce enum ref_worktree_type, which is slightly different from
enum ref_type. The latter is a misleading name (one would think that
'ref_type' would have the symref option).
Instead, enum ref_worktree_type only makes explicit how a refname
relates to a worktree. From this point of view, HEAD and
refs/bisect/abc are the same: they specify the current worktree
implicitly.
The files-backend must avoid packing refs/bisect/* and friends into
packed-refs, so expose is_per_worktree_ref() separately.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce and apply coccinelle rule to discourage an explicit
comparison between a pointer and NULL, and applies the clean-up to
the maintenance track.
* ep/maint-equals-null-cocci:
tree-wide: apply equals-null.cocci
tree-wide: apply equals-null.cocci
contrib/coccinnelle: add equals-null.cocci
|
|
* ep/maint-equals-null-cocci:
tree-wide: apply equals-null.cocci
contrib/coccinnelle: add equals-null.cocci
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git sparse-checkout" wants to work with per-worktree configuration,
but did not work well in a worktree attached to a bare repository.
* ds/sparse-checkout-requires-per-worktree-config:
config: make git_configset_get_string_tmp() private
worktree: copy sparse-checkout patterns and config on add
sparse-checkout: set worktree-config correctly
config: add repo_config_set_worktree_gently()
worktree: create init_worktree_config()
Documentation: add extensions.worktreeConfig details
|
|
Upgrading a repository to use extensions.worktreeConfig is non-trivial.
There are several steps involved, including moving some config settings
from the common config file to the main worktree's config.worktree file.
The previous change updated the documentation with all of these details.
Commands such as 'git sparse-checkout set' upgrade the repository to use
extensions.worktreeConfig without following these steps, causing some
user pain in some special cases.
Create a helper method, init_worktree_config(), that will be used in a
later change to fix this behavior within 'git sparse-checkout set'. The
method is carefully documented in worktree.h.
Note that we do _not_ upgrade the repository format version to 1 during
this process. The worktree config extension must be considered by Git
and third-party tools even if core.repositoryFormatVersion is 0 for
historical reasons documented in 11664196ac ("Revert
"check_repository_format_gently(): refuse extensions for old
repositories"", 2020-07-15). This is a special case for this extension,
and newer extensions (such as extensions.objectFormat) still need to
upgrade the repository format version.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the now-unused "failure_errno" parameter from the
refs_resolve_ref_unsafe() signature. In my recent 96f6623ada0 (Merge
branch 'ab/refs-errno-cleanup', 2021-11-29) series we made all of its
callers explicitly request the errno via an output parameter.
As that series shows all but one caller ended up passing in a
boilerplate "ignore_errno", since they only cared about whether the
return value was NULL or not, i.e. if the ref could be resolved.
There was one small issue with that series fixed with a follow-up in
31e39123695 (Merge branch 'ab/refs-errno-cleanup', 2022-01-14) a small
bug in that series was fixed.
After those two there was one caller left in sequencer.c that used the
"failure_errno', but as of the preceding commit it uses a boilerplate
"ignore_errno" instead.
This leaves the public refs API without any use of "failure_errno" at
all. We could still do with a bit of cleanup and generalization
between refs.c and refs/files-backend.c before the "reftable"
integration lands, but that's all internal to the reference code
itself.
So let's remove this output parameter. Not only isn't it used now, but
it's unlikely that we'll want it again in the future. We'd like to
slowly move the refs API to a more file-backend independent way of
communicating error codes, having it use a "failure_errno" was only
the first step in that direction. If this or any other function needs
to communicate what specifically is wrong with the requested "refname"
it'll be better to have the function set some output enum of
well-defined error states than piggy-backend on "errno".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Storing the worktrees list in a static variable meant that
find_shared_symref() had to rebuild the list on each call (which is
inefficient when the call site is in a loop), and also that each call
invalidated the pointer returned by the previous call (which is
confusing).
Instead, make it the caller’s responsibility to pass in the worktrees
list and manage its lifetime.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename the transitory refs_werrres_ref_unsafe() function to
refs_resolve_ref_unsafe(), now that all callers of the old function
have learned to pass in a "failure_errno" parameter.
The coccinelle semantic patch added in the preceding commit works, but
I couldn't figure out how to get spatch(1) to re-flow these argument
lists (and sometimes make lines way too long), so this rename was done
with:
perl -pi -e 's/refs_werrres_ref_unsafe/refs_resolve_ref_unsafe/g' \
$(git grep -l refs_werrres_ref_unsafe -- '*.c')
But after that "make contrib/coccinelle/refs.cocci.patch" comes up
empty, so the result would have been the same. Let's remove that
transitory semantic patch file, we won't need to retain it for any
other in-flight changes, refs_werrres_ref_unsafe() only existed within
this patch series.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are only handful of callers of find_shared_symref(), none of
whom care about errno, so let's migrate to the non-errno-propagating
version of refs_resolve_ref_unsafe() and explicitly ignore errno here.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The static add_head_info() function is only used indirectly by callers
of get_worktrees(), none of whom care about errno, and even if they
did having the faked-up one from refs_resolve_ref_unsafe() would only
confuse them if they used die_errno() et al. So let's explicitly
ignore it here.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the refs_read_ref_full() wrapper in favor of migrating various
refs.c API users to the underlying refs_werrres_ref_unsafe() function.
A careful reading of these callers shows that the callers of this
function did not care about "errno", by moving away from the
refs_resolve_ref_unsafe() wrapper we can be sure that nothing relies
on it anymore.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add missing __attribute__((format)) function attributes to various
"static" functions that take printf arguments.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many places in the code were doing
while ((d = readdir(dir)) != NULL) {
if (is_dot_or_dotdot(d->d_name))
continue;
...process d...
}
Introduce a readdir_skip_dot_and_dotdot() helper to make that a one-liner:
while ((d = readdir_skip_dot_and_dotdot(dir)) != NULL) {
...process d...
}
This helper particularly simplifies checks for empty directories.
Also use this helper in read_cached_dir() so that our statistics are
consistent across platforms. (In other words, read_cached_dir() should
have been using is_dot_or_dotdot() and skipping such entries, but did
not and left it to treat_path() to detect and mark such entries as
path_none.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add and apply a semantic patch for converting code that open-codes
CALLOC_ARRAY to use it instead. It shortens the code and infers the
element size automatically.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
worktree_lock_reason() aborts with an assertion failure when called on
the main worktree since locking the main worktree is nonsensical. Not
only is this behavior undocumented, thus callers might not even be aware
that the call could potentially crash the program, but it also forces
clients to be extra careful:
if (!is_main_worktree(wt) && worktree_locked_reason(...))
...
Since we know that locking makes no sense in the context of the main
worktree, we can simply return false for the main worktree, thus making
client code less complex by eliminating the need for the callers to have
inside knowledge about the implementation:
if (worktree_lock_reason(...))
...
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add worktree_prune_reason() to allow a caller to discover whether a
worktree is prunable and the reason that it is, much like
worktree_lock_reason() indicates whether a worktree is locked and the
reason for the lock. As with worktree_lock_reason(), retrieve the
prunable reason lazily and cache it in the `worktree` structure.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As part of teaching "git worktree list" to annotate worktree that is a
candidate for pruning, let's move should_prune_worktree() from
builtin/worktree.c to worktree.c in order to make part of the worktree
public API.
should_prune_worktree() knows how to select the given worktree for
pruning based on an expiration date, however the expiration value is
stored in a static file-scope variable and it is not local to the
function. In order to move the function, teach should_prune_worktree()
to take the expiration date as an argument and document the new
parameter that is not immediately obvious.
Also, change the function comment to clearly state that the worktree's
path is returned in `wtpath` argument.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`git worktree repair` knows how to repair the two-way links between the
repository and a worktree as long as a link in one or the other
direction is sound. For instance, if a linked worktree is moved (without
using `git worktree move`), repair is possible because the worktree
still knows the location of the repository even though the repository no
longer knows where the worktree is. Similarly, if the repository is
moved, repair is possible since the repository still knows the locations
of the worktrees even though the worktrees no longer know where the
repository is.
However, if both the repository and the worktrees are moved, then links
are severed in both directions, and no repair is possible. This is the
case even when the new worktree locations are specified as arguments to
`git worktree repair`. The reason for this limitation is twofold. First,
when `repair` consults the worktree's gitfile (/path/to/worktree/.git)
to determine the corresponding <repo>/worktrees/<id>/gitdir file to fix,
<repo> is the old path to the repository, thus it is unable to fix the
`gitdir` file at its new location since it doesn't know where it is.
Second, when `repair` consults <repo>/worktrees/<id>/gitdir to find the
location of the worktree's gitfile (/path/to/worktree/.git), the path
recorded in `gitdir` is the old location of the worktree's gitfile, thus
it is unable to repair the gitfile since it doesn't know where it is.
Fix these shortcomings by teaching `repair` to attempt to infer the new
location of the <repo>/worktrees/<id>/gitdir file when the location
recorded in the worktree's gitfile has become stale but the file is
otherwise well-formed. The inference is intentionally simple-minded.
For each worktree path specified as an argument, `git worktree repair`
manually reads the ".git" gitfile at that location and, if it is
well-formed, extracts the <id>. It then searches for a corresponding
<id> in <repo>/worktrees/ and, if found, concludes that there is a
reasonable match and updates <repo>/worktrees/<id>/gitdir to point at
the specified worktree path. In order for <repo> to be known, `git
worktree repair` must be run in the main worktree or bare repository.
`git worktree repair` first attempts to repair each incoming
/path/to/worktree/.git gitfile to point at the repository, and then
attempts to repair outgoing <repo>/worktrees/<id>/gitdir files to point
at the worktrees. This sequence was chosen arbitrarily when originally
implemented since the order of fixes is immaterial as long as one side
of the two-way link between the repository and a worktree is sound.
However, for this new repair technique to work, the order must be
reversed. This is because the new inference mechanism, when it is
successful, allows the outgoing <repo>/worktrees/<id>/gitdir file to be
repaired, thus fixing one side of the two-way link. Once that side is
fixed, the other side can be fixed by the existing repair mechanism,
hence the order of repairs is now significant.
Two safeguards are employed to avoid hijacking a worktree from a
different repository if the user accidentally specifies a foreign
worktree as an argument. The first, as described above, is that it
requires an <id> match between the repository and the worktree. That
itself is not foolproof for preventing hijack, so the second safeguard
is that the inference will only kick in if the worktree's
/path/to/worktree/.git gitfile does not point at a repository.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* ma/worktree-cleanups:
worktree: use skip_prefix to parse target
worktree: rename copy-pasted variable
worktree: update renamed variable in comment
worktree: inline `worktree_ref()` into its only caller
wt-status: introduce wt_status_state_free_buffers()
wt-status: print to s->fp, not stdout
wt-status: replace sha1 mentions with oid
|
|
Instead of checking for "refs/heads/" using `starts_with()`, then
skipping past "refs/heads/" using `strlen()`, just use `skip_prefix()`.
In `is_worktree_being_rebased()`, we can adjust the indentation while
we're here and lose a pair of parentheses which isn't needed and which
might even make the reader wonder what they're missing and why that
grouping is there.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As the commit message of 04a3dfb8b5 ("worktree.c: check whether branch
is bisected in another worktree", 2016-04-22) indicates, the function
`is_worktree_being_bisected()` is based on the older function
`is_worktree_being_rebased()`. This heritage can also be seen in the
name of the variable where we store our return value: It was never
adapted while copy-editing and remains as `found_rebase`.
Rename the variable to make clear that we're looking for a bisect(ion),
nothing else.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The comment above `add_head_info()` mentions "head_sha1", but it was
renamed to "head_oid" in 0f05154c70 ("worktree: convert struct worktree
to object_id", 2017-10-15). Update the comment.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have `strbuf_worktree_ref()`, which works on a strbuf, and a wrapper
for it, `worktree_ref()` which returns a string. We even make this
wrapper available through worktree.h. But it only has a single caller,
sitting right next to it in worktree.c.
Just inline the wrapper into its only caller. This means the caller can
quite naturally reuse a single strbuf. We currently achieve something
similar by having a static strbuf in the wrapper.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we have a `struct wt_status_state`, we manually free its `branch`,
`onto` and `detached_from`, or sometimes just one or two of them.
Provide a function `wt_status_state_free_buffers()` which does the
freeing.
The callers are still aware of these fields, e.g., they check whether
`branch` was populated or not. But this way, they don't need to know
about *all* of them, and if `struct wt_status_state` gets more fields,
they will not need to learn to free them.
Users of `struct wt_status` (which contains a `wt_status_state`) already
have `wt_status_collect_free_buffers()` (corresponding to
`wt_status_collect()`) which we can also teach to use this new helper.
Finally, note that we're currently leaving dangling pointers behind.
Some callers work on a stack-allocated struct, where this is obviously
ok. But for the users of `run_status()` in builtin/commit.c, there are
ample opportunities for someone to mistakenly use those dangling
pointers. We seem to be ok for now, but it's a use-after-free waiting to
happen. Let's leave NULL-pointers behind instead.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The .git/worktrees/<id>/gitdir file points at the location of a linked
worktree's .git file. Its content must be of the form
/path/to/worktree/.git (from which the location of the worktree itself
can be derived by stripping the "/.git" suffix). If the gitdir file is
deleted or becomes corrupted or outdated, then Git will be unable to
find the linked worktree. An easy way for the gitdir file to become
outdated is for the user to move the worktree manually (without using
"git worktree move"). Although it is possible to manually update the
gitdir file to reflect the new linked worktree location, doing so
requires a level of knowledge about worktree internals beyond what a
user should be expected to know offhand.
Therefore, teach "git worktree repair" how to repair broken or outdated
.git/worktrees/<id>/gitdir files automatically. (For this to work, the
command must either be invoked from within the worktree whose gitdir
file requires repair, or from within the main or any linked worktree by
providing the path of the broken worktree as an argument to "git
worktree repair".)
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The .git file in a linked worktree is a "gitfile" which points back to
the .git/worktrees/<id> entry in the main worktree or bare repository.
If a worktree's .git file is deleted or becomes corrupted or outdated,
then the linked worktree won't know how to find the repository or any of
its own administrative files (such as 'index', 'HEAD', etc.). An easy
way for the .git file to become outdated is for the user to move the
main worktree or bare repository. Although it is possible to manually
update each linked worktree's .git file to reflect the new repository
location, doing so requires a level of knowledge about worktree
internals beyond what a user should be expected to know offhand.
Therefore, teach "git worktree repair" how to repair broken or outdated
worktree .git files automatically. (For this to work, the command must
be invoked from within the main worktree or bare repository, or from
within a worktree which has not become disconnected from the repository
-- such as one which was created after the repository was moved.)
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
