| Age | Commit message (Collapse) | Author |
|---|
|
Assorted changes around pseudoref handling.
* ps/pseudo-refs:
bisect: consistently write BISECT_EXPECTED_REV via the refdb
refs: complete list of special refs
refs: propagate errno when reading special refs fails
wt-status: read HEAD and ORIG_HEAD via the refdb
|
|
"git status" is taught to show both the branch being bisected and
being rebased when both are in effect at the same time.
* rj/status-bisect-while-rebase:
status: fix branch shown when not only bisecting
|
|
We read both the HEAD and ORIG_HEAD references directly from the
filesystem in order to figure out whether we're currently splitting a
commit. If both of the following are true:
- HEAD points to the same object as "rebase-merge/amend".
- ORIG_HEAD points to the same object as "rebase-merge/orig-head".
Then we are currently splitting commits.
The current code only works by chance because we only have a single
reference backend implementation. Refactor it to instead read both refs
via the refdb layer so that we'll also be compatible with alternate
reference backends.
There are some subtleties involved here:
- We pass `RESOLVE_REF_READING` so that a missing ref will cause
`read_ref_full()` to return an error.
- We pass `RESOLVE_REF_NO_RECURSE` so that we do not try to resolve
symrefs. The old code didn't resolve symrefs either, and we only
ever write object IDs into the refs in "rebase-merge/".
- In the same spirit we verify that successfully-read refs are not
symbolic refs.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 83c750acde (wt-status.*: better advice for git status added,
2012-06-05), git-status received new informative messages to describe
the ongoing work in a worktree.
These messages were enhanced in 0722c805d6 (status: show the branch name
if possible in in-progress info, 2013-02-03), to show, if possible, the
branch where the operation was initiated.
Since then, we show incorrect information when several operations are in
progress and one of them is bisect:
$ git checkout -b foo
$ GIT_SEQUENCE_EDITOR='echo break >' git rebase -i HEAD~
$ git checkout -b bar
$ git bisect start
$ git status
...
You are currently editing a commit while rebasing branch 'bar' on '...'.
You are currently bisecting, started from branch 'bar'.
...
Note that we erroneously say "while rebasing branch 'bar'" when we
should be referring to "foo".
This must have gone unnoticed for so long because it must be unusual to
start a bisection while another operation is in progress. And even less
usual to involve different branches.
It caught my attention reviewing a leak introduced in 8b87cfd000
(wt-status: move strbuf into read_and_strip_branch(), 2013-03-16).
A simple change to deal with this situation can be to record in struct
wt_status_state, the branch where the bisect starts separately from the
branch related to other operations.
Let's do it and so we'll be able to display correct information and
we'll avoid the leak as well.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We now limit depth of the tree objects and maximum length of
pathnames recorded in tree objects.
* jk/tree-name-and-depth-limit:
lower core.maxTreeDepth default to 2048
tree-diff: respect max_allowed_tree_depth
list-objects: respect max_allowed_tree_depth
read_tree(): respect max_allowed_tree_depth
traverse_trees(): respect max_allowed_tree_depth
add core.maxTreeDepth config
fsck: detect very large tree pathnames
tree-walk: rename "error" variable
tree-walk: drop MAX_TRAVERSE_TREES macro
tree-walk: reduce stack size for recursive functions
|
|
"git diff --no-such-option" and other corner cases around the exit
status of the "diff" command has been corrected.
* jk/diff-result-code-cleanup:
diff: drop useless "status" parameter from diff_result_code()
diff: drop useless return values in git-diff helpers
diff: drop useless return from run_diff_{files,index} functions
diff: die when failing to read index in git-diff builtin
diff: show usage for unknown builtin_diff_files() options
diff-files: avoid negative exit value
diff: spell DIFF_INDEX_CACHED out when calling run_diff_index()
|
|
The read_tree() function reads trees recursively (via its read_tree_at()
helper). This can cause it to run out of stack space on very deep trees.
Let's teach it about the new core.maxTreeDepth option.
The easiest way to demonstrate this is via "ls-tree -r", which the test
covers. Note that I needed a tree depth of ~30k to trigger a segfault on
my Linux system, not the 4100 used by our "big" test in t6700. However,
that test still tells us what we want: that the default 4096 limit is
enough to prevent segfaults on all platforms. We could bump it, but that
increases the cost of the test setup for little gain.
As an interesting side-note: when I originally wrote this patch about 4
years ago, I needed a depth of ~50k to segfault. But porting it forward,
the number is much lower. Seemingly little things like cf0983213c (hash:
add an algo member to struct object_id, 2021-04-26) take it from 32,722
to 29,080.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The use of API for consistency between two calls to
require_clean_work_tree() from the sequencer code has been cleaned
up.
* ob/sequencer-empty-hint-fix:
sequencer: rectify empty hint in call of require_clean_work_tree()
|
|
The canonical way to represent "no error hint" is making it NULL, which
shortcuts the error() call altogether. This fixes the output by removing
the line which said just "error:", which would appear when the worktree
is dirtied while editing the initial rebase todo file. This was
introduced by 97e1873 (rebase -i: rewrite complete_action() in C,
2018-08-28), which did a somewhat inaccurate conversion from shell.
To avoid that such bugs re-appear, test for the condition in
require_clean_work_tree().
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many programs use diff_result_code() to get a user-visible program exit
code from a diff result (e.g., checking opts.found_changes if
--exit-code was requested).
This function also takes a "status" parameter, which seems at first
glance that it could be used to propagate an error encountered when
computing the diff. But it doesn't work that way:
- negative values are passed through as-is, but are not appropriate as
program exit codes
- when --exit-code or --check is in effect, we _ignore_ the passed-in
status completely. So a failed diff which did not have a chance to
set opts.found_changes would erroneously report "success, no
changes" instead of propagating the error.
After recent cleanups, neither of these bugs is possible to trigger, as
every caller just passes in "0". So rather than fixing them, we can
simply drop the useless parameter instead.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Neither of these functions ever returns a value other than zero.
Instead, they expect unrecoverable errors to exit immediately, and
things like "--exit-code" are stored inside the diff_options struct to
be handled later via diff_result_code().
Some callers do check the return values, but many don't bother. Let's
drop the useless return values, which are misleading callers about how
the functions work. This could be seen as a step in the wrong direction,
as we might want to eventually "lib-ify" these to more cleanly return
errors up the stack, in which case we'd have to add the return values
back in. But there are some benefits to doing this now:
1. In the current code, somebody could accidentally add a "return -1"
to one of the functions, which would be erroneously ignored by many
callers. By removing the return code, the compiler can notice the
mismatch and force the developer to decide what to do.
Obviously the other option here is that we could start consistently
checking the error code in every caller. But it would be dead code,
and we wouldn't get any compile-time help in catching new cases.
2. It communicates the situation to callers, who may want to choose a
different function. These functions are really thin wrappers for
doing git-diff-files and git-diff-index within the process. But
callers who care about recovering from an error here are probably
better off using the underlying library functions, many of
which do return errors.
If somebody eventually wants to teach these functions to propagate
errors, they'll have to switch back to returning a value, effectively
reverting this patch. But at least then they will be starting with a
level playing field: they know that they will need to inspect each
caller to see how it should handle the error.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many callers of run_diff_index() passed literal "1" for the option
flag word, which should better be spelled out as DIFF_INDEX_CACHED
for readablity. Everybody else passes "0" that can stay as-is.
The other bit in the option flag word is DIFF_INDEX_MERGE_BASE, but
curiously there is only one caller that can pass it, which is "git
diff-index --merge-base" itself---no internal callers uses the
feature.
A bit tricky call to the function is in builtin/submodule--helper.c
where the .cached member in a private struct is set/reset as a plain
Boolean flag, which happens to be "1" and happens to match the value
of DIFF_INDEX_CACHED.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Help newbies by suggesting that there are cases where force-pushing
is a valid and sensible thing to update a branch at a remote
repository, rather than reconciling with merge/rebase.
* ah/advise-force-pushing:
push: don't imply that integration is always required before pushing
remote: don't imply that integration is always required before pushing
wt-status: don't show divergence advice when committing
|
|
When the user is in the middle of making a commit, they are not yet at
the point where they are ready to think about integrating their local
branch with the corresponding remote branch or force-pushing over the
remote branch. Don't include advice on how to deal with divergent
branches in the commit template, to avoid giving the impression that the
divergence needs to be dealt with immediately. Similar advice will be
printed when it is most relevant, that is, if the user does try to push
without first reconciling the two branches.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
During a cherry-pick or revert session that works on multiple
commits, "git status" did not give correct information, which has
been corrected.
* jk/cherry-pick-revert-status:
fix cherry-pick/revert status when doing multiple commits
|
|
Move functions that are not about pure string manipulation out of
strbuf.[ch]
* cw/strbuf-cleanup:
strbuf: remove global variable
path: move related function to path
object-name: move related functions to object-name
credential-store: move related functions to credential-store file
abspath: move related functions to abspath
strbuf: clarify dependency
strbuf: clarify API boundary
|
|
The status report for an in-progress cherry-pick does not show the
current commit if the cherry-pick happens as part of a series of
multiple commits:
$ git cherry-pick <commit1> <commit2>
< one of the cherry-picks fails to merge clean >
Cherry-pick currently in progress.
(run "git cherry-pick --continue" to continue)
(use "git cherry-pick --skip" to skip this patch)
(use "git cherry-pick --abort" to cancel the cherry-pick operation)
$ git status
On branch <branch>
Your branch is ahead of '<upstream>' by 1 commit.
(use "git push" to publish your local commits)
Cherry-pick currently in progress.
(run "git cherry-pick --continue" to continue)
(use "git cherry-pick --skip" to skip this patch)
(use "git cherry-pick --abort" to cancel the cherry-pick operation)
The show_cherry_pick_in_progress() function prints "Cherry-pick
currently in progress". That function does have a more verbose print
based on whether the cherry_pick_head_oid is null or not. If it is not
null, then a more helpful message including which commit is actually
being picked is displayed.
The introduction of the "Cherry-pick currently in progress" message
comes from 4a72486de97b ("fix cherry-pick/revert status after commit",
2019-04-17). This commit modified wt_status_get_state() in order to
detect that a cherry-pick was in progress even if the user has used `git
commit` in the middle of the sequence.
The check used to detect this is the call to sequencer_get_last_command.
If the sequencer indicates that the lass command was a REPLAY_PICK, then
the state->cherry_pick_in_progress is set to 1 and the
cherry_pick_head_oid is initialized to the null_oid. Similar behavior is
done for the case of REPLAY_REVERT.
It happens that this call of sequencer_get_last_command will always
report the action even if the user hasn't interrupted anything. Thus,
during a range of cherry-picks or reverts, the cherry_pick_head_oid and
revert_head_oid will always be overwritten and initialized to the null
oid.
This results in status always displaying the terse message which does
not include commit information.
Fix this by adding an additional check so that we do not re-initialize
the cherry_pick_head_oid or revert_head_oid if we have already set the
cherry_pick_in_progress or revert_in_progress bits. This ensures that
git status will display the more helpful information when its available.
Add a test case covering this behavior.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This also made it clear that several .c files depended upon various
things that oidset included, but had omitted the direct #include for
those headers. Add those now.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This also made it clear that several .c files that depended upon path.h
were missing a #include for it; add the missing includes while at it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since this header showed up in some places besides just #include
statements, update/clean-up/remove those other places as well.
Note that compat/fsmonitor/fsm-path-utils-darwin.c previously got
away with violating the rule that all files must start with an include
of git-compat-util.h (or a short-list of alternate headers that happen
to include it first). This change exposed the violation and caused it
to stop building correctly; fix it by having it include
git-compat-util.h first, as per policy.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For the functions defined in read-cache.c, move their declarations from
cache.h to a new header, read-cache-ll.h. Also move some related inline
functions from cache.h to read-cache.h. The purpose of the
read-cache-ll.h/read-cache.h split is that about 70% of the sites don't
need the inline functions and the extra headers they include.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As a library that only interacts with other primitives, strbuf should
not utilize the comment_line_char global variable within its
functions. Therefore, add an additional parameter for functions that use
comment_line_char and refactor callers to pass it in instead.
strbuf_stripspace() removes the skip_comments boolean and checks if
comment_line_char is a non-NUL character to determine whether to skip
comments or not.
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Dozens of files made use of advice functions, without explicitly
including advice.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
advice.h if they are using it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Dozens of files made use of trace and trace2 functions, without
explicitly including trace.h or trace2.h. This made it more difficult
to find which files could remove a dependence on cache.h. Make C files
explicitly include trace.h or trace2.h if they are using them.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
en/header-split-cache-h
* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
|
|
As can easily be seen from grepping in our sources, we had these uses
of "the_repository" in various library code in cases where the
function in question was already getting a "struct repository *"
argument. Let's use that argument instead.
Out of these changes only the changes to "cache-tree.c",
"commit-reach.c", "shallow.c" and "upload-pack.c" would have cleanly
applied before the migration away from the "repo_*()" wrapper macros
in the preceding commits.
The rest aren't new, as we'd previously implicitly refer to
"the_repository", but it's now more obvious that we were doing the
wrong thing all along, and should have used the parameter instead.
The change to change "get_index_format_default(the_repository)" in
"read-cache.c" to use the "r" variable instead should arguably have
been part of [1], or in the subsequent cleanup in [2]. Let's do it
here, as can be seen from the initial code in [3] it's not important
that we use "the_repository" there, but would prefer to always use the
current repository.
This change excludes the "the_repository" use in "upload-pack.c"'s
upload_pack_advertise(), as the in-flight [4] makes that change.
1. ee1f0c242ef (read-cache: add index.skipHash config option,
2023-01-06)
2. 6269f8eaad0 (treewide: always have a valid "index_state.repo"
member, 2023-01-17)
3. 7211b9e7534 (repo-settings: consolidate some config settings,
2019-08-13)
4. <Y/hbUsGPVNAxTdmS@coredump.intra.peff.net>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Apply the part of "the_repository.pending.cocci" pertaining to
"refs.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Apply the part of "the_repository.pending.cocci" pertaining to
"cache.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is one step towards making strbuf.c not depend upon cache.h.
Additional steps will follow in subsequent commits.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up around unused function parameters.
* jk/unused-post-2.39:
userdiff: mark unused parameter in internal callback
list-objects-filter: mark unused parameters in virtual functions
diff: mark unused parameters in callbacks
xdiff: mark unused parameter in xdl_call_hunk_func()
xdiff: drop unused parameter in def_ff()
ws: drop unused parameter from ws_blank_line()
list-objects: drop process_gitlink() function
blob: drop unused parts of parse_blob_buffer()
ls-refs: use repository parameter to iterate refs
|
|
The diff code provides a format_callback interface, but not every
callback needs each parameter (e.g., the "opt" and "data" parameters are
frequently left unused). Likewise for the output_prefix callback, the
low-level change/add_remove interfaces, the callbacks used by
xdi_diff(), etc.
Mark unused arguments in the callback implementations to quiet
-Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`git status` can be slow when there are a large number of
untracked files and directories since Git must search the entire
worktree to enumerate them. When it is too slow, Git prints
advice with the elapsed search time and a suggestion to disable
the search using the `-uno` option. This suggestion also carries
a warning that might scare off some users.
However, these days, `-uno` isn't the only option. Git can reduce
the time taken to enumerate untracked files by caching results from
previous `git status` invocations, when the `core.untrackedCache`
and `core.fsmonitor` features are enabled.
Update the `git status` man page to explain these configuration
options, and update the advice to provide more detail about the
current configuration and to refer to the updated documentation.
Signed-off-by: Rudy Rigot <rudy.rigot@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As reported in [1] the "UNUSED(var)" macro introduced in
2174b8c75de (Merge branch 'jk/unused-annotation' into next,
2022-08-24) breaks coccinelle's parsing of our sources in files where
it occurs.
Let's instead partially go with the approach suggested in [2] of
making this not take an argument. As noted in [1] "coccinelle" will
ignore such tokens in argument lists that it doesn't know about, and
it's less of a surprise to syntax highlighters.
This undoes the "help us notice when a parameter marked as unused is
actually use" part of 9b240347543 (git-compat-util: add UNUSED macro,
2022-08-19), a subsequent commit will further tweak the macro to
implement a replacement for that functionality.
1. https://lore.kernel.org/git/220825.86ilmg4mil.gmgdl@evledraar.gmail.com/
2. https://lore.kernel.org/git/220819.868rnk54ju.gmgdl@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Functions used with for_each_reflog_ent() need to conform to a
particular interface, but not every function needs all of the
parameters. Mark the unused ones to make -Wunused-parameter happy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename .env_array member to .env in the child_process structure.
* ab/env-array:
run-command API users: use "env" not "env_array" in comments & names
run-command API: rename "env_array" to "env"
|
|
Start following-up on the rename mentioned in c7c4bdeccf3 (run-command
API: remove "env" member, always use "env_array", 2021-11-25) of
"env_array" to "env".
The "env_array" name was picked in 19a583dc39e (run-command: add
env_array, an optional argv_array for env, 2014-10-19) because "env"
was taken. Let's not forever keep the oddity of "*_array" for this
"struct strvec", but not for its "args" sibling.
This commit is almost entirely made with a coccinelle rule[1]. The
only manual change here is in run-command.h to rename the struct
member itself and to change "env_array" to "env" in the
CHILD_PROCESS_INIT initializer.
The rest of this is all a result of applying [1]:
* make contrib/coccinelle/run_command.cocci.patch
* patch -p1 <contrib/coccinelle/run_command.cocci.patch
* git add -u
1. cat contrib/coccinelle/run_command.pending.cocci
@@
struct child_process E;
@@
- E.env_array
+ E.env
@@
struct child_process *E;
@@
- E->env_array
+ E->env
I've avoided changing any comments and derived variable names here,
that will all be done in the next commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a TODO comment indicating that we should release "diffopt" in
release_revisions(). In a preceding commit we started releasing the
"pruning" member of the same type, but handling "diffopt" will require
us to untangle the "no_free" conditions I added in e900d494dcf (diff:
add an API for deferred freeing, 2021-02-11).
Let's leave a TODO comment to that effect, and so that we don't forget
refactor code that was changed to use release_revisions() in earlier
commits to stop using the "diffopt" member after a call to
release_revisions(). This works currently, but would become a logic
error as soon as we started freeing "diffopt". Doing that change now
doesn't harm anything, and future-proofs us against a later change to
release_revisions().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Extend the the release_revisions() function so that it frees the
"prune_data" in the "struct rev_info". This means that any code that
calls "release_revisions()" already can get rid of adjacent calls to
clear_pathspec().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use release_revisions() for users of "struct rev_list" that reach into
the "struct rev_info" and clear the "prune_data" already.
In a subsequent commit we'll teach release_revisions() to clear this
itself, but in the meantime let's invoke release_revisions() here to
clear anything else we may have missed, and for reasons of having
consistent boilerplate.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a release_revisions() to various users of "struct rev_list" in
those straightforward cases where we only need to add the
release_revisions() call to the end of a block, and don't need to
e.g. refactor anything to use a "goto cleanup" pattern.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The users of the revision.[ch] API's "struct rev_info" are a major
source of memory leaks in the test suite under SANITIZE=leak, which in
turn adds a lot of noise when trying to mark up tests with
"TEST_PASSES_SANITIZE_LEAK=true".
The users of that API are largely one-shot, e.g. "git rev-list" or
"git log", or the "git checkout" and "git stash" being modified here
For these callers freeing the memory is arguably a waste of time, but
in many cases they've actually been trying to free the memory, and
just doing that in a buggy manner.
Let's provide a release_revisions() function for these users, and
start migrating them over per the plan outlined in [1]. Right now this
only handles the "pending" member of the struct, but more will be
added in subsequent commits.
Even though we only clear the "pending" member now, let's not leave a
trap in code like the pre-image of index_differs_from(), where we'd
start doing the wrong thing as soon as the release_revisions() learned
to clear its "diffopt". I.e. we need to call release_revisions() after
we've inspected any state in "struct rev_info".
This leaves in place e.g. clear_pathspec(&rev.prune_data) in
stash_working_tree() in builtin/stash.c, subsequent commits will teach
release_revisions() to free "prune_data" and other members that in
some cases are individually cleared by users of "struct rev_info" by
reaching into its members. Those subsequent commits will remove the
relevant calls to e.g. clear_pathspec().
We avoid amending code in index_differs_from() in diff-lib.c as well
as wt_status_collect_changes_index(), has_unstaged_changes() and
has_uncommitted_changes() in wt-status.c in a way that assumes that we
are already clearing the "diffopt" member. That will be handled in a
subsequent commit.
1. https://lore.kernel.org/git/87a6k8daeu.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Count string_list items in size_t, not "unsigned int".
* ab/string-list-count-in-size-t:
string-list API: change "nr" and "alloc" to "size_t"
gettext API users: don't explicitly cast ngettext()'s "n"
|
|
Change the "nr" and "alloc" members of "struct string_list" to use
"size_t" instead of "nr". On some platforms the size of an "unsigned
int" will be smaller than a "size_t", e.g. a 32 bit unsigned v.s. 64
bit unsigned. As "struct string_list" is a generic API we use in a lot
of places this might cause overflows.
As one example: code in "refs.c" keeps track of the number of refs
with a "size_t", and auxiliary code in builtin/remote.c in
get_ref_states() appends those to a "struct string_list".
While we're at it split the "nr" and "alloc" in string-list.h across
two lines, which is the case for most such struct member
declarations (e.g. in "strbuf.h" and "strvec.h").
Changing e.g. "int i" to "size_t i" in run_and_feed_hook() isn't
strictly necessary, and there are a lot more cases where we'll use a
local "int", "unsigned int" etc. variable derived from the "nr" in the
"struct string_list". But in that case as well as
add_wrapped_shortlog_msg() in builtin/shortlog.c we need to adjust the
printf format referring to "nr" anyway, so let's also change the other
variables referring to it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Enable the 'recursive' diff option for the diff executed as part of 'git
status'. Without the 'recursive' enabled, 'git status' reports index
changes incorrectly when the following conditions were met:
* sparse index is enabled
* there is a difference between the index and HEAD in a file inside a
*subdirectory* of a sparse directory
* the sparse directory index entry is *not* expanded in-core
Because it is not recursive by default, the diff in 'git status' reports
changes only at the level of files and directories that are immediate
children of a sparse directory, rather than recursing into directories with
changes to identify the modified file(s). As a result, 'git status' reports
the immediate subdirectory itself as "modified".
Example:
$ git init
$ mkdir -p sparse/sub
$ echo test >sparse/sub/foo
$ git add .
$ git commit -m "commit 1"
$ echo somethingelse >sparse/sub/foo
$ git add .
$ git commit -a -m "commit 2"
$ git sparse-checkout set --cone --sparse-index 'sparse'
$ git reset --soft HEAD~1
$ git status
On branch master
You are in a sparse checkout.
Changes to be committed:
(use "git restore --staged <file>..." to unstage)
modified: sparse/sub
Enabling the 'recursive' diff option in 'wt_status_collect_changes_index'
corrects this issue by allowing the diff to recurse into subdirectories of
sparse directories to find modified files. Given the same repository setup
as the example above, the corrected result of `git status` is:
$ git status
On branch master
You are in a sparse checkout.
Changes to be committed:
(use "git restore --staged <file>..." to unstage)
modified: sparse/sub/foo
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git am" learns "--empty=(stop|drop|keep)" option to tweak what is
done to a piece of e-mail without a patch in it.
* xw/am-empty:
am: support --allow-empty to record specific empty patches
am: support --empty=<option> to handle empty patches
doc: git-format-patch: describe the option --always
|
