1 files changed, 44 insertions, 0 deletions
diff --git a/Библиотеки/FastLED-master/examples/Multiple/MirroringSample/MirroringSample.ino b/Библиотеки/FastLED-master/examples/Multiple/MirroringSample/MirroringSample.ino
new file mode 100644
index 0000000..39d748b
--- /dev/null
+++ b/Библиотеки/FastLED-master/examples/Multiple/MirroringSample/MirroringSample.ino
@@ -0,0 +1,44 @@
+// MirroringSample - see https://github.com/FastLED/FastLED/wiki/Multiple-Controller-Examples for more info on
+// using multiple controllers.  In this example, we're going to set up four NEOPIXEL strips on four
+// different pins, and show the same thing on all four of them, a simple bouncing dot/cyclon type pattern
+
+#include "FastLED.h"
+
+#define NUM_LEDS_PER_STRIP 60
+CRGB leds[NUM_LEDS_PER_STRIP];
+
+// For mirroring strips, all the "special" stuff happens just in setup.  We
+// just addLeds multiple times, once for each strip
+void setup() {
+  // tell FastLED there's 60 NEOPIXEL leds on pin 4
+  FastLED.addLeds<NEOPIXEL, 4>(leds, NUM_LEDS_PER_STRIP);
+
+  // tell FastLED there's 60 NEOPIXEL leds on pin 5
+  FastLED.addLeds<NEOPIXEL, 5>(leds, NUM_LEDS_PER_STRIP);
+
+  // tell FastLED there's 60 NEOPIXEL leds on pin 6
+  FastLED.addLeds<NEOPIXEL, 6>(leds, NUM_LEDS_PER_STRIP);
+
+  // tell FastLED there's 60 NEOPIXEL leds on pin 7
+  FastLED.addLeds<NEOPIXEL, 7>(leds, NUM_LEDS_PER_STRIP);
+}
+
+void loop() {
+  for(int i = 0; i < NUM_LEDS_PER_STRIP; i++) {
+    // set our current dot to red
+    leds[i] = CRGB::Red;
+    FastLED.show();
+    // clear our current dot before we move on
+    leds[i] = CRGB::Black;
+    delay(100);
+  }
+
+  for(int i = NUM_LEDS_PER_STRIP-1; i >= 0; i--) {
+    // set our current dot to red
+    leds[i] = CRGB::Red;
+    FastLED.show();
+    // clear our current dot before we move on
+    leds[i] = CRGB::Black;
+    delay(100);
+  }
+}