diff options
Diffstat (limited to 'Библиотеки/FastLED-master/lib8tion.cpp')
| -rw-r--r-- | Библиотеки/FastLED-master/lib8tion.cpp | 251 |
1 files changed, 251 insertions, 0 deletions
diff --git a/Библиотеки/FastLED-master/lib8tion.cpp b/Библиотеки/FastLED-master/lib8tion.cpp new file mode 100644 index 0000000..1306e5c --- /dev/null +++ b/Библиотеки/FastLED-master/lib8tion.cpp @@ -0,0 +1,251 @@ +#define FASTLED_INTERNAL +#include <stdint.h> +#include "FastLED.h" + +FASTLED_NAMESPACE_BEGIN + +#define RAND16_SEED 1337 +uint16_t rand16seed = RAND16_SEED; + + +// memset8, memcpy8, memmove8: +// optimized avr replacements for the standard "C" library +// routines memset, memcpy, and memmove. +// +// There are two techniques that make these routines +// faster than the standard avr-libc routines. +// First, the loops are unrolled 2X, meaning that +// the average loop overhead is cut in half. +// And second, the compare-and-branch at the bottom +// of each loop decrements the low byte of the +// counter, and if the carry is clear, it branches +// back up immediately. Only if the low byte math +// causes carry do we bother to decrement the high +// byte and check that result for carry as well. +// Results for a 100-byte buffer are 20-40% faster +// than standard avr-libc, at a cost of a few extra +// bytes of code. + +#if defined(__AVR__) +extern "C" { +//__attribute__ ((noinline)) +void * memset8 ( void * ptr, uint8_t val, uint16_t num ) +{ + asm volatile( + " movw r26, %[ptr] \n\t" + " sbrs %A[num], 0 \n\t" + " rjmp Lseteven_%= \n\t" + " rjmp Lsetodd_%= \n\t" + "Lsetloop_%=: \n\t" + " st X+, %[val] \n\t" + "Lsetodd_%=: \n\t" + " st X+, %[val] \n\t" + "Lseteven_%=: \n\t" + " subi %A[num], 2 \n\t" + " brcc Lsetloop_%= \n\t" + " sbci %B[num], 0 \n\t" + " brcc Lsetloop_%= \n\t" + : [num] "+r" (num) + : [ptr] "r" (ptr), + [val] "r" (val) + : "memory" + ); + return ptr; +} + + + +//__attribute__ ((noinline)) +void * memcpy8 ( void * dst, const void* src, uint16_t num ) +{ + asm volatile( + " movw r30, %[src] \n\t" + " movw r26, %[dst] \n\t" + " sbrs %A[num], 0 \n\t" + " rjmp Lcpyeven_%= \n\t" + " rjmp Lcpyodd_%= \n\t" + "Lcpyloop_%=: \n\t" + " ld __tmp_reg__, Z+ \n\t" + " st X+, __tmp_reg__ \n\t" + "Lcpyodd_%=: \n\t" + " ld __tmp_reg__, Z+ \n\t" + " st X+, __tmp_reg__ \n\t" + "Lcpyeven_%=: \n\t" + " subi %A[num], 2 \n\t" + " brcc Lcpyloop_%= \n\t" + " sbci %B[num], 0 \n\t" + " brcc Lcpyloop_%= \n\t" + : [num] "+r" (num) + : [src] "r" (src), + [dst] "r" (dst) + : "memory" + ); + return dst; +} + +//__attribute__ ((noinline)) +void * memmove8 ( void * dst, const void* src, uint16_t num ) +{ + if( src > dst) { + // if src > dst then we can use the forward-stepping memcpy8 + return memcpy8( dst, src, num); + } else { + // if src < dst then we have to step backward: + dst = (char*)dst + num; + src = (char*)src + num; + asm volatile( + " movw r30, %[src] \n\t" + " movw r26, %[dst] \n\t" + " sbrs %A[num], 0 \n\t" + " rjmp Lmoveven_%= \n\t" + " rjmp Lmovodd_%= \n\t" + "Lmovloop_%=: \n\t" + " ld __tmp_reg__, -Z \n\t" + " st -X, __tmp_reg__ \n\t" + "Lmovodd_%=: \n\t" + " ld __tmp_reg__, -Z \n\t" + " st -X, __tmp_reg__ \n\t" + "Lmoveven_%=: \n\t" + " subi %A[num], 2 \n\t" + " brcc Lmovloop_%= \n\t" + " sbci %B[num], 0 \n\t" + " brcc Lmovloop_%= \n\t" + : [num] "+r" (num) + : [src] "r" (src), + [dst] "r" (dst) + : "memory" + ); + return dst; + } +} + + +} /* end extern "C" */ + +#endif /* AVR */ + + + + +#if 0 +// TEST / VERIFICATION CODE ONLY BELOW THIS POINT +#include <Arduino.h> +#include "lib8tion.h" + +void test1abs( int8_t i) +{ + Serial.print("abs("); Serial.print(i); Serial.print(") = "); + int8_t j = abs8(i); + Serial.print(j); Serial.println(" "); +} + +void testabs() +{ + delay(5000); + for( int8_t q = -128; q != 127; q++) { + test1abs(q); + } + for(;;){}; +} + + +void testmul8() +{ + delay(5000); + byte r, c; + + Serial.println("mul8:"); + for( r = 0; r <= 20; r += 1) { + Serial.print(r); Serial.print(" : "); + for( c = 0; c <= 20; c += 1) { + byte t; + t = mul8( r, c); + Serial.print(t); Serial.print(' '); + } + Serial.println(' '); + } + Serial.println("done."); + for(;;){}; +} + + +void testscale8() +{ + delay(5000); + byte r, c; + + Serial.println("scale8:"); + for( r = 0; r <= 240; r += 10) { + Serial.print(r); Serial.print(" : "); + for( c = 0; c <= 240; c += 10) { + byte t; + t = scale8( r, c); + Serial.print(t); Serial.print(' '); + } + Serial.println(' '); + } + + Serial.println(' '); + Serial.println("scale8_video:"); + + for( r = 0; r <= 100; r += 4) { + Serial.print(r); Serial.print(" : "); + for( c = 0; c <= 100; c += 4) { + byte t; + t = scale8_video( r, c); + Serial.print(t); Serial.print(' '); + } + Serial.println(' '); + } + + Serial.println("done."); + for(;;){}; +} + + + +void testqadd8() +{ + delay(5000); + byte r, c; + for( r = 0; r <= 240; r += 10) { + Serial.print(r); Serial.print(" : "); + for( c = 0; c <= 240; c += 10) { + byte t; + t = qadd8( r, c); + Serial.print(t); Serial.print(' '); + } + Serial.println(' '); + } + Serial.println("done."); + for(;;){}; +} + +void testnscale8x3() +{ + delay(5000); + byte r, g, b, sc; + for( byte z = 0; z < 10; z++) { + r = random8(); g = random8(); b = random8(); sc = random8(); + + Serial.print("nscale8x3_video( "); + Serial.print(r); Serial.print(", "); + Serial.print(g); Serial.print(", "); + Serial.print(b); Serial.print(", "); + Serial.print(sc); Serial.print(") = [ "); + + nscale8x3_video( r, g, b, sc); + + Serial.print(r); Serial.print(", "); + Serial.print(g); Serial.print(", "); + Serial.print(b); Serial.print("]"); + + Serial.println(' '); + } + Serial.println("done."); + for(;;){}; +} + +#endif + +FASTLED_NAMESPACE_END |