diff options
Diffstat (limited to 'STM32_bootloader/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h')
| -rw-r--r-- | STM32_bootloader/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h | 420 |
1 files changed, 210 insertions, 210 deletions
diff --git a/STM32_bootloader/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h b/STM32_bootloader/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h index 155c017..6ff1109 100644 --- a/STM32_bootloader/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h +++ b/STM32_bootloader/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h @@ -1,210 +1,210 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal_def.h - * @author MCD Application Team - * @brief This file contains HAL common defines, enumeration, macros and - * structures definitions. - ****************************************************************************** - * @attention - * - * <h2><center>© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.</center></h2> - * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F1xx_HAL_DEF -#define __STM32F1xx_HAL_DEF - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx.h" -#include "Legacy/stm32_hal_legacy.h" -#include <stddef.h> - -/* Exported types ------------------------------------------------------------*/ - -/** - * @brief HAL Status structures definition - */ -typedef enum -{ - HAL_OK = 0x00U, - HAL_ERROR = 0x01U, - HAL_BUSY = 0x02U, - HAL_TIMEOUT = 0x03U -} HAL_StatusTypeDef; - -/** - * @brief HAL Lock structures definition - */ -typedef enum -{ - HAL_UNLOCKED = 0x00U, - HAL_LOCKED = 0x01U -} HAL_LockTypeDef; - -/* Exported macro ------------------------------------------------------------*/ -#define HAL_MAX_DELAY 0xFFFFFFFFU - -#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) != 0U) -#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == 0U) - -#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \ - do{ \ - (__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \ - (__DMA_HANDLE__).Parent = (__HANDLE__); \ - } while(0U) - -#define UNUSED(X) (void)X /* To avoid gcc/g++ warnings */ - -/** @brief Reset the Handle's State field. - * @param __HANDLE__ specifies the Peripheral Handle. - * @note This macro can be used for the following purpose: - * - When the Handle is declared as local variable; before passing it as parameter - * to HAL_PPP_Init() for the first time, it is mandatory to use this macro - * to set to 0 the Handle's "State" field. - * Otherwise, "State" field may have any random value and the first time the function - * HAL_PPP_Init() is called, the low level hardware initialization will be missed - * (i.e. HAL_PPP_MspInit() will not be executed). - * - When there is a need to reconfigure the low level hardware: instead of calling - * HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init(). - * In this later function, when the Handle's "State" field is set to 0, it will execute the function - * HAL_PPP_MspInit() which will reconfigure the low level hardware. - * @retval None - */ -#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0U) - -#if (USE_RTOS == 1U) -/* Reserved for future use */ -#error "USE_RTOS should be 0 in the current HAL release" -#else -#define __HAL_LOCK(__HANDLE__) \ - do{ \ - if((__HANDLE__)->Lock == HAL_LOCKED) \ - { \ - return HAL_BUSY; \ - } \ - else \ - { \ - (__HANDLE__)->Lock = HAL_LOCKED; \ - } \ - }while (0U) - -#define __HAL_UNLOCK(__HANDLE__) \ - do{ \ - (__HANDLE__)->Lock = HAL_UNLOCKED; \ - }while (0U) -#endif /* USE_RTOS */ - -#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */ -#ifndef __weak -#define __weak __attribute__((weak)) -#endif -#ifndef __packed -#define __packed __attribute__((packed)) -#endif -#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */ -#ifndef __weak -#define __weak __attribute__((weak)) -#endif /* __weak */ -#ifndef __packed -#define __packed __attribute__((__packed__)) -#endif /* __packed */ -#endif /* __GNUC__ */ - - -/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */ -#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */ -#ifndef __ALIGN_BEGIN -#define __ALIGN_BEGIN -#endif -#ifndef __ALIGN_END -#define __ALIGN_END __attribute__ ((aligned (4))) -#endif -#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */ -#ifndef __ALIGN_END -#define __ALIGN_END __attribute__ ((aligned (4))) -#endif /* __ALIGN_END */ -#ifndef __ALIGN_BEGIN -#define __ALIGN_BEGIN -#endif /* __ALIGN_BEGIN */ -#else -#ifndef __ALIGN_END -#define __ALIGN_END -#endif /* __ALIGN_END */ -#ifndef __ALIGN_BEGIN -#if defined (__CC_ARM) /* ARM Compiler V5*/ -#define __ALIGN_BEGIN __align(4) -#elif defined (__ICCARM__) /* IAR Compiler */ -#define __ALIGN_BEGIN -#endif /* __CC_ARM */ -#endif /* __ALIGN_BEGIN */ -#endif /* __GNUC__ */ - - -/** - * @brief __RAM_FUNC definition - */ -#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) -/* ARM Compiler V4/V5 and V6 - -------------------------- - RAM functions are defined using the toolchain options. - Functions that are executed in RAM should reside in a separate source module. - Using the 'Options for File' dialog you can simply change the 'Code / Const' - area of a module to a memory space in physical RAM. - Available memory areas are declared in the 'Target' tab of the 'Options for Target' - dialog. -*/ -#define __RAM_FUNC - -#elif defined ( __ICCARM__ ) -/* ICCARM Compiler - --------------- - RAM functions are defined using a specific toolchain keyword "__ramfunc". -*/ -#define __RAM_FUNC __ramfunc - -#elif defined ( __GNUC__ ) -/* GNU Compiler - ------------ - RAM functions are defined using a specific toolchain attribute - "__attribute__((section(".RamFunc")))". -*/ -#define __RAM_FUNC __attribute__((section(".RamFunc"))) - -#endif - -/** - * @brief __NOINLINE definition - */ -#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) || defined ( __GNUC__ ) -/* ARM V4/V5 and V6 & GNU Compiler - ------------------------------- -*/ -#define __NOINLINE __attribute__ ( (noinline) ) - -#elif defined ( __ICCARM__ ) -/* ICCARM Compiler - --------------- -*/ -#define __NOINLINE _Pragma("optimize = no_inline") - -#endif - -#ifdef __cplusplus -} -#endif - -#endif /* ___STM32F1xx_HAL_DEF */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ +/**
+ ******************************************************************************
+ * @file stm32f1xx_hal_def.h
+ * @author MCD Application Team
+ * @brief This file contains HAL common defines, enumeration, macros and
+ * structures definitions.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2017 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_HAL_DEF
+#define __STM32F1xx_HAL_DEF
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx.h"
+#include "Legacy/stm32_hal_legacy.h"
+#include <stddef.h>
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief HAL Status structures definition
+ */
+typedef enum
+{
+ HAL_OK = 0x00U,
+ HAL_ERROR = 0x01U,
+ HAL_BUSY = 0x02U,
+ HAL_TIMEOUT = 0x03U
+} HAL_StatusTypeDef;
+
+/**
+ * @brief HAL Lock structures definition
+ */
+typedef enum
+{
+ HAL_UNLOCKED = 0x00U,
+ HAL_LOCKED = 0x01U
+} HAL_LockTypeDef;
+
+/* Exported macro ------------------------------------------------------------*/
+#define HAL_MAX_DELAY 0xFFFFFFFFU
+
+#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) != 0U)
+#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == 0U)
+
+#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \
+ do{ \
+ (__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \
+ (__DMA_HANDLE__).Parent = (__HANDLE__); \
+ } while(0U)
+
+#define UNUSED(X) (void)X /* To avoid gcc/g++ warnings */
+
+/** @brief Reset the Handle's State field.
+ * @param __HANDLE__ specifies the Peripheral Handle.
+ * @note This macro can be used for the following purpose:
+ * - When the Handle is declared as local variable; before passing it as parameter
+ * to HAL_PPP_Init() for the first time, it is mandatory to use this macro
+ * to set to 0 the Handle's "State" field.
+ * Otherwise, "State" field may have any random value and the first time the function
+ * HAL_PPP_Init() is called, the low level hardware initialization will be missed
+ * (i.e. HAL_PPP_MspInit() will not be executed).
+ * - When there is a need to reconfigure the low level hardware: instead of calling
+ * HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init().
+ * In this later function, when the Handle's "State" field is set to 0, it will execute the function
+ * HAL_PPP_MspInit() which will reconfigure the low level hardware.
+ * @retval None
+ */
+#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0U)
+
+#if (USE_RTOS == 1U)
+/* Reserved for future use */
+#error "USE_RTOS should be 0 in the current HAL release"
+#else
+#define __HAL_LOCK(__HANDLE__) \
+ do{ \
+ if((__HANDLE__)->Lock == HAL_LOCKED) \
+ { \
+ return HAL_BUSY; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Lock = HAL_LOCKED; \
+ } \
+ }while (0U)
+
+#define __HAL_UNLOCK(__HANDLE__) \
+ do{ \
+ (__HANDLE__)->Lock = HAL_UNLOCKED; \
+ }while (0U)
+#endif /* USE_RTOS */
+
+#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */
+#ifndef __weak
+#define __weak __attribute__((weak))
+#endif
+#ifndef __packed
+#define __packed __attribute__((packed))
+#endif
+#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
+#ifndef __weak
+#define __weak __attribute__((weak))
+#endif /* __weak */
+#ifndef __packed
+#define __packed __attribute__((__packed__))
+#endif /* __packed */
+#endif /* __GNUC__ */
+
+
+/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */
+#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */
+#ifndef __ALIGN_BEGIN
+#define __ALIGN_BEGIN
+#endif
+#ifndef __ALIGN_END
+#define __ALIGN_END __attribute__ ((aligned (4)))
+#endif
+#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
+#ifndef __ALIGN_END
+#define __ALIGN_END __attribute__ ((aligned (4)))
+#endif /* __ALIGN_END */
+#ifndef __ALIGN_BEGIN
+#define __ALIGN_BEGIN
+#endif /* __ALIGN_BEGIN */
+#else
+#ifndef __ALIGN_END
+#define __ALIGN_END
+#endif /* __ALIGN_END */
+#ifndef __ALIGN_BEGIN
+#if defined (__CC_ARM) /* ARM Compiler V5*/
+#define __ALIGN_BEGIN __align(4)
+#elif defined (__ICCARM__) /* IAR Compiler */
+#define __ALIGN_BEGIN
+#endif /* __CC_ARM */
+#endif /* __ALIGN_BEGIN */
+#endif /* __GNUC__ */
+
+
+/**
+ * @brief __RAM_FUNC definition
+ */
+#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050))
+/* ARM Compiler V4/V5 and V6
+ --------------------------
+ RAM functions are defined using the toolchain options.
+ Functions that are executed in RAM should reside in a separate source module.
+ Using the 'Options for File' dialog you can simply change the 'Code / Const'
+ area of a module to a memory space in physical RAM.
+ Available memory areas are declared in the 'Target' tab of the 'Options for Target'
+ dialog.
+*/
+#define __RAM_FUNC
+
+#elif defined ( __ICCARM__ )
+/* ICCARM Compiler
+ ---------------
+ RAM functions are defined using a specific toolchain keyword "__ramfunc".
+*/
+#define __RAM_FUNC __ramfunc
+
+#elif defined ( __GNUC__ )
+/* GNU Compiler
+ ------------
+ RAM functions are defined using a specific toolchain attribute
+ "__attribute__((section(".RamFunc")))".
+*/
+#define __RAM_FUNC __attribute__((section(".RamFunc")))
+
+#endif
+
+/**
+ * @brief __NOINLINE definition
+ */
+#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) || defined ( __GNUC__ )
+/* ARM V4/V5 and V6 & GNU Compiler
+ -------------------------------
+*/
+#define __NOINLINE __attribute__ ( (noinline) )
+
+#elif defined ( __ICCARM__ )
+/* ICCARM Compiler
+ ---------------
+*/
+#define __NOINLINE _Pragma("optimize = no_inline")
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ___STM32F1xx_HAL_DEF */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|