Welcome to mirror list, hosted at ThFree Co, Russian Federation.

github.com/ClusterM/famicom-dumper-writer.git - Unnamed repository; edit this file 'description' to name the repository.
summaryrefslogtreecommitdiff
path: root/STM32_bootloader/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h
diff options
context:
space:
mode:
Diffstat (limited to 'STM32_bootloader/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h')
-rw-r--r--STM32_bootloader/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h388
1 files changed, 0 insertions, 388 deletions
diff --git a/STM32_bootloader/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h b/STM32_bootloader/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h
deleted file mode 100644
index 2b1b4ed..0000000
--- a/STM32_bootloader/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h
+++ /dev/null
@@ -1,388 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f1xx_hal_pwr.h
- * @author MCD Application Team
- * @brief Header file of PWR HAL module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F1xx_HAL_PWR_H
-#define __STM32F1xx_HAL_PWR_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f1xx_hal_def.h"
-
-/** @addtogroup STM32F1xx_HAL_Driver
- * @{
- */
-
-/** @addtogroup PWR
- * @{
- */
-
-/* Exported types ------------------------------------------------------------*/
-
-/** @defgroup PWR_Exported_Types PWR Exported Types
- * @{
- */
-
-/**
- * @brief PWR PVD configuration structure definition
- */
-typedef struct
-{
- uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level.
- This parameter can be a value of @ref PWR_PVD_detection_level */
-
- uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins.
- This parameter can be a value of @ref PWR_PVD_Mode */
-}PWR_PVDTypeDef;
-
-
-/**
- * @}
- */
-
-
-/* Internal constants --------------------------------------------------------*/
-
-/** @addtogroup PWR_Private_Constants
- * @{
- */
-
-#define PWR_EXTI_LINE_PVD ((uint32_t)0x00010000) /*!< External interrupt line 16 Connected to the PVD EXTI Line */
-
-/**
- * @}
- */
-
-
-/* Exported constants --------------------------------------------------------*/
-
-/** @defgroup PWR_Exported_Constants PWR Exported Constants
- * @{
- */
-
-/** @defgroup PWR_PVD_detection_level PWR PVD detection level
- * @{
- */
-#define PWR_PVDLEVEL_0 PWR_CR_PLS_2V2
-#define PWR_PVDLEVEL_1 PWR_CR_PLS_2V3
-#define PWR_PVDLEVEL_2 PWR_CR_PLS_2V4
-#define PWR_PVDLEVEL_3 PWR_CR_PLS_2V5
-#define PWR_PVDLEVEL_4 PWR_CR_PLS_2V6
-#define PWR_PVDLEVEL_5 PWR_CR_PLS_2V7
-#define PWR_PVDLEVEL_6 PWR_CR_PLS_2V8
-#define PWR_PVDLEVEL_7 PWR_CR_PLS_2V9
-
-/**
- * @}
- */
-
-/** @defgroup PWR_PVD_Mode PWR PVD Mode
- * @{
- */
-#define PWR_PVD_MODE_NORMAL 0x00000000U /*!< basic mode is used */
-#define PWR_PVD_MODE_IT_RISING 0x00010001U /*!< External Interrupt Mode with Rising edge trigger detection */
-#define PWR_PVD_MODE_IT_FALLING 0x00010002U /*!< External Interrupt Mode with Falling edge trigger detection */
-#define PWR_PVD_MODE_IT_RISING_FALLING 0x00010003U /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
-#define PWR_PVD_MODE_EVENT_RISING 0x00020001U /*!< Event Mode with Rising edge trigger detection */
-#define PWR_PVD_MODE_EVENT_FALLING 0x00020002U /*!< Event Mode with Falling edge trigger detection */
-#define PWR_PVD_MODE_EVENT_RISING_FALLING 0x00020003U /*!< Event Mode with Rising/Falling edge trigger detection */
-
-/**
- * @}
- */
-
-
-/** @defgroup PWR_WakeUp_Pins PWR WakeUp Pins
- * @{
- */
-
-#define PWR_WAKEUP_PIN1 PWR_CSR_EWUP
-
-/**
- * @}
- */
-
-/** @defgroup PWR_Regulator_state_in_SLEEP_STOP_mode PWR Regulator state in SLEEP/STOP mode
- * @{
- */
-#define PWR_MAINREGULATOR_ON 0x00000000U
-#define PWR_LOWPOWERREGULATOR_ON PWR_CR_LPDS
-
-/**
- * @}
- */
-
-/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry
- * @{
- */
-#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01)
-#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02)
-
-/**
- * @}
- */
-
-/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry
- * @{
- */
-#define PWR_STOPENTRY_WFI ((uint8_t)0x01)
-#define PWR_STOPENTRY_WFE ((uint8_t)0x02)
-
-/**
- * @}
- */
-
-/** @defgroup PWR_Flag PWR Flag
- * @{
- */
-#define PWR_FLAG_WU PWR_CSR_WUF
-#define PWR_FLAG_SB PWR_CSR_SBF
-#define PWR_FLAG_PVDO PWR_CSR_PVDO
-
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Exported macro ------------------------------------------------------------*/
-/** @defgroup PWR_Exported_Macros PWR Exported Macros
- * @{
- */
-
-/** @brief Check PWR flag is set or not.
- * @param __FLAG__: specifies the flag to check.
- * This parameter can be one of the following values:
- * @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event
- * was received from the WKUP pin or from the RTC alarm
- * An additional wakeup event is detected if the WKUP pin is enabled
- * (by setting the EWUP bit) when the WKUP pin level is already high.
- * @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was
- * resumed from StandBy mode.
- * @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled
- * by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode
- * For this reason, this bit is equal to 0 after Standby or reset
- * until the PVDE bit is set.
- * @retval The new state of __FLAG__ (TRUE or FALSE).
- */
-#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
-
-/** @brief Clear the PWR's pending flags.
- * @param __FLAG__: specifies the flag to clear.
- * This parameter can be one of the following values:
- * @arg PWR_FLAG_WU: Wake Up flag
- * @arg PWR_FLAG_SB: StandBy flag
- */
-#define __HAL_PWR_CLEAR_FLAG(__FLAG__) SET_BIT(PWR->CR, ((__FLAG__) << 2))
-
-/**
- * @brief Enable interrupt on PVD Exti Line 16.
- * @retval None.
- */
-#define __HAL_PWR_PVD_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR, PWR_EXTI_LINE_PVD)
-
-/**
- * @brief Disable interrupt on PVD Exti Line 16.
- * @retval None.
- */
-#define __HAL_PWR_PVD_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR, PWR_EXTI_LINE_PVD)
-
-/**
- * @brief Enable event on PVD Exti Line 16.
- * @retval None.
- */
-#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR, PWR_EXTI_LINE_PVD)
-
-/**
- * @brief Disable event on PVD Exti Line 16.
- * @retval None.
- */
-#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR, PWR_EXTI_LINE_PVD)
-
-
-/**
- * @brief PVD EXTI line configuration: set falling edge trigger.
- * @retval None.
- */
-#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
-
-
-/**
- * @brief Disable the PVD Extended Interrupt Falling Trigger.
- * @retval None.
- */
-#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
-
-
-/**
- * @brief PVD EXTI line configuration: set rising edge trigger.
- * @retval None.
- */
-#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
-
-/**
- * @brief Disable the PVD Extended Interrupt Rising Trigger.
- * This parameter can be:
- * @retval None.
- */
-#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
-
-/**
- * @brief PVD EXTI line configuration: set rising & falling edge trigger.
- * @retval None.
- */
-#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
-
-/**
- * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger.
- * This parameter can be:
- * @retval None.
- */
-#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();
-
-
-
-/**
- * @brief Check whether the specified PVD EXTI interrupt flag is set or not.
- * @retval EXTI PVD Line Status.
- */
-#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD))
-
-/**
- * @brief Clear the PVD EXTI flag.
- * @retval None.
- */
-#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD))
-
-/**
- * @brief Generate a Software interrupt on selected EXTI line.
- * @retval None.
- */
-#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER, PWR_EXTI_LINE_PVD)
-/**
- * @}
- */
-
-/* Private macro -------------------------------------------------------------*/
-/** @defgroup PWR_Private_Macros PWR Private Macros
- * @{
- */
-#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \
- ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \
- ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \
- ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7))
-
-
-#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \
- ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \
- ((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \
- ((MODE) == PWR_PVD_MODE_NORMAL))
-
-#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1))
-
-#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
- ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
-
-#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE))
-
-#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE))
-
-/**
- * @}
- */
-
-
-
-/* Exported functions --------------------------------------------------------*/
-
-/** @addtogroup PWR_Exported_Functions PWR Exported Functions
- * @{
- */
-
-/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
- * @{
- */
-
-/* Initialization and de-initialization functions *******************************/
-void HAL_PWR_DeInit(void);
-void HAL_PWR_EnableBkUpAccess(void);
-void HAL_PWR_DisableBkUpAccess(void);
-
-/**
- * @}
- */
-
-/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions
- * @{
- */
-
-/* Peripheral Control functions ************************************************/
-void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD);
-/* #define HAL_PWR_ConfigPVD 12*/
-void HAL_PWR_EnablePVD(void);
-void HAL_PWR_DisablePVD(void);
-
-/* WakeUp pins configuration functions ****************************************/
-void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx);
-void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);
-
-/* Low Power modes configuration functions ************************************/
-void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
-void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
-void HAL_PWR_EnterSTANDBYMode(void);
-
-void HAL_PWR_EnableSleepOnExit(void);
-void HAL_PWR_DisableSleepOnExit(void);
-void HAL_PWR_EnableSEVOnPend(void);
-void HAL_PWR_DisableSEVOnPend(void);
-
-
-
-void HAL_PWR_PVD_IRQHandler(void);
-void HAL_PWR_PVDCallback(void);
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-
-#endif /* __STM32F1xx_HAL_PWR_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-27 18:53:41 +0300