diff options
Diffstat (limited to 'STM32_bootloader/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c')
| -rw-r--r-- | STM32_bootloader/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c | 244 |
1 files changed, 0 insertions, 244 deletions
diff --git a/STM32_bootloader/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c b/STM32_bootloader/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c deleted file mode 100644 index 234b52c..0000000 --- a/STM32_bootloader/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c +++ /dev/null @@ -1,244 +0,0 @@ -/**
- ******************************************************************************
- * @file stm32f1xx_hal_pcd_ex.c
- * @author MCD Application Team
- * @brief PCD Extended HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the USB Peripheral Controller:
- * + Extended features functions
- *
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f1xx_hal.h"
-
-/** @addtogroup STM32F1xx_HAL_Driver
- * @{
- */
-
-/** @defgroup PCDEx PCDEx
- * @brief PCD Extended HAL module driver
- * @{
- */
-
-#ifdef HAL_PCD_MODULE_ENABLED
-
-#if defined (USB) || defined (USB_OTG_FS)
-/* Private types -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private constants ---------------------------------------------------------*/
-/* Private macros ------------------------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-/* Exported functions --------------------------------------------------------*/
-
-/** @defgroup PCDEx_Exported_Functions PCDEx Exported Functions
- * @{
- */
-
-/** @defgroup PCDEx_Exported_Functions_Group1 Peripheral Control functions
- * @brief PCDEx control functions
- *
-@verbatim
- ===============================================================================
- ##### Extended features functions #####
- ===============================================================================
- [..] This section provides functions allowing to:
- (+) Update FIFO configuration
-
-@endverbatim
- * @{
- */
-#if defined (USB_OTG_FS)
-/**
- * @brief Set Tx FIFO
- * @param hpcd PCD handle
- * @param fifo The number of Tx fifo
- * @param size Fifo size
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size)
-{
- uint8_t i;
- uint32_t Tx_Offset;
-
- /* TXn min size = 16 words. (n : Transmit FIFO index)
- When a TxFIFO is not used, the Configuration should be as follows:
- case 1 : n > m and Txn is not used (n,m : Transmit FIFO indexes)
- --> Txm can use the space allocated for Txn.
- case2 : n < m and Txn is not used (n,m : Transmit FIFO indexes)
- --> Txn should be configured with the minimum space of 16 words
- The FIFO is used optimally when used TxFIFOs are allocated in the top
- of the FIFO.Ex: use EP1 and EP2 as IN instead of EP1 and EP3 as IN ones.
- When DMA is used 3n * FIFO locations should be reserved for internal DMA registers */
-
- Tx_Offset = hpcd->Instance->GRXFSIZ;
-
- if (fifo == 0U)
- {
- hpcd->Instance->DIEPTXF0_HNPTXFSIZ = ((uint32_t)size << 16) | Tx_Offset;
- }
- else
- {
- Tx_Offset += (hpcd->Instance->DIEPTXF0_HNPTXFSIZ) >> 16;
- for (i = 0U; i < (fifo - 1U); i++)
- {
- Tx_Offset += (hpcd->Instance->DIEPTXF[i] >> 16);
- }
-
- /* Multiply Tx_Size by 2 to get higher performance */
- hpcd->Instance->DIEPTXF[fifo - 1U] = ((uint32_t)size << 16) | Tx_Offset;
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Set Rx FIFO
- * @param hpcd PCD handle
- * @param size Size of Rx fifo
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size)
-{
- hpcd->Instance->GRXFSIZ = size;
-
- return HAL_OK;
-}
-#endif /* defined (USB_OTG_FS) */
-#if defined (USB)
-/**
- * @brief Configure PMA for EP
- * @param hpcd Device instance
- * @param ep_addr endpoint address
- * @param ep_kind endpoint Kind
- * USB_SNG_BUF: Single Buffer used
- * USB_DBL_BUF: Double Buffer used
- * @param pmaadress: EP address in The PMA: In case of single buffer endpoint
- * this parameter is 16-bit value providing the address
- * in PMA allocated to endpoint.
- * In case of double buffer endpoint this parameter
- * is a 32-bit value providing the endpoint buffer 0 address
- * in the LSB part of 32-bit value and endpoint buffer 1 address
- * in the MSB part of 32-bit value.
- * @retval HAL status
- */
-
-HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd, uint16_t ep_addr,
- uint16_t ep_kind, uint32_t pmaadress)
-{
- PCD_EPTypeDef *ep;
-
- /* initialize ep structure*/
- if ((0x80U & ep_addr) == 0x80U)
- {
- ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK];
- }
- else
- {
- ep = &hpcd->OUT_ep[ep_addr];
- }
-
- /* Here we check if the endpoint is single or double Buffer*/
- if (ep_kind == PCD_SNG_BUF)
- {
- /* Single Buffer */
- ep->doublebuffer = 0U;
- /* Configure the PMA */
- ep->pmaadress = (uint16_t)pmaadress;
- }
- else /* USB_DBL_BUF */
- {
- /* Double Buffer Endpoint */
- ep->doublebuffer = 1U;
- /* Configure the PMA */
- ep->pmaaddr0 = (uint16_t)(pmaadress & 0xFFFFU);
- ep->pmaaddr1 = (uint16_t)((pmaadress & 0xFFFF0000U) >> 16);
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Software Device Connection,
- * this function is not required by USB OTG FS peripheral, it is used
- * only by USB Device FS peripheral.
- * @param hpcd PCD handle
- * @param state connection state (0 : disconnected / 1: connected)
- * @retval None
- */
-__weak void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(hpcd);
- UNUSED(state);
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_PCDEx_SetConnectionState could be implemented in the user file
- */
-}
-#endif /* defined (USB) */
-
-/**
- * @brief Send LPM message to user layer callback.
- * @param hpcd PCD handle
- * @param msg LPM message
- * @retval HAL status
- */
-__weak void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(hpcd);
- UNUSED(msg);
-
- /* NOTE : This function should not be modified, when the callback is needed,
- the HAL_PCDEx_LPM_Callback could be implemented in the user file
- */
-}
-
-/**
- * @brief Send BatteryCharging message to user layer callback.
- * @param hpcd PCD handle
- * @param msg LPM message
- * @retval HAL status
- */
-__weak void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(hpcd);
- UNUSED(msg);
-
- /* NOTE : This function should not be modified, when the callback is needed,
- the HAL_PCDEx_BCD_Callback could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-#endif /* defined (USB) || defined (USB_OTG_FS) */
-#endif /* HAL_PCD_MODULE_ENABLED */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|