1 files changed, 0 insertions, 123 deletions
diff --git a/firmware/targets/f7/Src/rtc.c b/firmware/targets/f7/Src/rtc.c
deleted file mode 100644
index 8487c1e0..00000000
--- a/firmware/targets/f7/Src/rtc.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    rtc.c
-  * @brief   This file provides code for the configuration
-  *          of the RTC instances.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-
-/* Includes ------------------------------------------------------------------*/
-#include "rtc.h"
-
-/* USER CODE BEGIN 0 */
-
-/* USER CODE END 0 */
-
-RTC_HandleTypeDef hrtc;
-
-/* RTC init function */
-void MX_RTC_Init(void)
-{
-  RTC_TimeTypeDef sTime = {0};
-  RTC_DateTypeDef sDate = {0};
-
-  /** Initialize RTC Only
-  */
-  hrtc.Instance = RTC;
-  hrtc.Init.HourFormat = RTC_HOURFORMAT_24;
-  hrtc.Init.AsynchPrediv = 127;
-  hrtc.Init.SynchPrediv = 255;
-  hrtc.Init.OutPut = RTC_OUTPUT_DISABLE;
-  hrtc.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
-  hrtc.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
-  hrtc.Init.OutPutRemap = RTC_OUTPUT_REMAP_NONE;
-  if (HAL_RTC_Init(&hrtc) != HAL_OK)
-  {
-    Error_Handler();
-  }
-
-  /* USER CODE BEGIN Check_RTC_BKUP */
-  return;
-  /* USER CODE END Check_RTC_BKUP */
-
-  /** Initialize RTC and set the Time and Date
-  */
-  sTime.Hours = 0x0;
-  sTime.Minutes = 0x0;
-  sTime.Seconds = 0x0;
-  sTime.SubSeconds = 0x0;
-  sTime.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
-  sTime.StoreOperation = RTC_STOREOPERATION_RESET;
-  if (HAL_RTC_SetTime(&hrtc, &sTime, RTC_FORMAT_BCD) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  sDate.WeekDay = RTC_WEEKDAY_MONDAY;
-  sDate.Month = RTC_MONTH_JANUARY;
-  sDate.Date = 0x1;
-  sDate.Year = 0x0;
-
-  if (HAL_RTC_SetDate(&hrtc, &sDate, RTC_FORMAT_BCD) != HAL_OK)
-  {
-    Error_Handler();
-  }
-
-}
-
-void HAL_RTC_MspInit(RTC_HandleTypeDef* rtcHandle)
-{
-
-  if(rtcHandle->Instance==RTC)
-  {
-  /* USER CODE BEGIN RTC_MspInit 0 */
-
-  /* USER CODE END RTC_MspInit 0 */
-    /* RTC clock enable */
-    __HAL_RCC_RTC_ENABLE();
-    __HAL_RCC_RTCAPB_CLK_ENABLE();
-
-    /* RTC interrupt Init */
-    HAL_NVIC_SetPriority(TAMP_STAMP_LSECSS_IRQn, 5, 0);
-    HAL_NVIC_EnableIRQ(TAMP_STAMP_LSECSS_IRQn);
-  /* USER CODE BEGIN RTC_MspInit 1 */
-
-  /* USER CODE END RTC_MspInit 1 */
-  }
-}
-
-void HAL_RTC_MspDeInit(RTC_HandleTypeDef* rtcHandle)
-{
-
-  if(rtcHandle->Instance==RTC)
-  {
-  /* USER CODE BEGIN RTC_MspDeInit 0 */
-
-  /* USER CODE END RTC_MspDeInit 0 */
-    /* Peripheral clock disable */
-    __HAL_RCC_RTC_DISABLE();
-    __HAL_RCC_RTCAPB_CLK_DISABLE();
-
-    /* RTC interrupt Deinit */
-    HAL_NVIC_DisableIRQ(TAMP_STAMP_LSECSS_IRQn);
-  /* USER CODE BEGIN RTC_MspDeInit 1 */
-
-  /* USER CODE END RTC_MspDeInit 1 */
-  }
-}
-
-/* USER CODE BEGIN 1 */
-
-/* USER CODE END 1 */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/