diff options
Diffstat (limited to 'firmware/targets/f7/cube/Inc/stm32wbxx_hal_conf.h')
| -rw-r--r-- | firmware/targets/f7/cube/Inc/stm32wbxx_hal_conf.h | 171 |
1 files changed, 86 insertions, 85 deletions
diff --git a/firmware/targets/f7/cube/Inc/stm32wbxx_hal_conf.h b/firmware/targets/f7/cube/Inc/stm32wbxx_hal_conf.h index 6b1d2553..e151d81b 100644 --- a/firmware/targets/f7/cube/Inc/stm32wbxx_hal_conf.h +++ b/firmware/targets/f7/cube/Inc/stm32wbxx_hal_conf.h @@ -22,7 +22,7 @@ #define __STM32WBxx_HAL_CONF_H #ifdef __cplusplus - extern "C" { +extern "C" { #endif /* Exported types ------------------------------------------------------------*/ @@ -66,26 +66,26 @@ #define HAL_PWR_MODULE_ENABLED #define HAL_RCC_MODULE_ENABLED -#define USE_HAL_ADC_REGISTER_CALLBACKS 0u -#define USE_HAL_COMP_REGISTER_CALLBACKS 0u -#define USE_HAL_CRYP_REGISTER_CALLBACKS 0u -#define USE_HAL_I2C_REGISTER_CALLBACKS 0u -#define USE_HAL_IRDA_REGISTER_CALLBACKS 0u -#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0u -#define USE_HAL_PCD_REGISTER_CALLBACKS 0u -#define USE_HAL_PKA_REGISTER_CALLBACKS 0u -#define USE_HAL_QSPI_REGISTER_CALLBACKS 0u -#define USE_HAL_RNG_REGISTER_CALLBACKS 0u -#define USE_HAL_RTC_REGISTER_CALLBACKS 0u -#define USE_HAL_SAI_REGISTER_CALLBACKS 0u +#define USE_HAL_ADC_REGISTER_CALLBACKS 0u +#define USE_HAL_COMP_REGISTER_CALLBACKS 0u +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0u +#define USE_HAL_I2C_REGISTER_CALLBACKS 0u +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0u +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0u +#define USE_HAL_PCD_REGISTER_CALLBACKS 0u +#define USE_HAL_PKA_REGISTER_CALLBACKS 0u +#define USE_HAL_QSPI_REGISTER_CALLBACKS 0u +#define USE_HAL_RNG_REGISTER_CALLBACKS 0u +#define USE_HAL_RTC_REGISTER_CALLBACKS 0u +#define USE_HAL_SAI_REGISTER_CALLBACKS 0u #define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0u -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0u -#define USE_HAL_SPI_REGISTER_CALLBACKS 0u -#define USE_HAL_TIM_REGISTER_CALLBACKS 0u -#define USE_HAL_TSC_REGISTER_CALLBACKS 0u -#define USE_HAL_UART_REGISTER_CALLBACKS 0u -#define USE_HAL_USART_REGISTER_CALLBACKS 0u -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0u +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0u +#define USE_HAL_SPI_REGISTER_CALLBACKS 0u +#define USE_HAL_TIM_REGISTER_CALLBACKS 0u +#define USE_HAL_TSC_REGISTER_CALLBACKS 0u +#define USE_HAL_UART_REGISTER_CALLBACKS 0u +#define USE_HAL_USART_REGISTER_CALLBACKS 0u +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0u /* ########################## Oscillator Values adaptation ####################*/ /** @@ -93,20 +93,20 @@ * This value is used by the RCC HAL module to compute the system frequency * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) -#define HSE_VALUE 32000000U /*!< Value of the External oscillator in Hz */ +#if !defined(HSE_VALUE) +#define HSE_VALUE 32000000U /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT ((uint32_t)100) /*!< Time out for HSE start up, in ms */ +#if !defined(HSE_STARTUP_TIMEOUT) +#define HSE_STARTUP_TIMEOUT ((uint32_t)100) /*!< Time out for HSE start up, in ms */ #endif /* HSE_STARTUP_TIMEOUT */ /** * @brief Internal Multiple Speed oscillator (MSI) default value. * This value is the default MSI range value after Reset. */ -#if !defined (MSI_VALUE) - #define MSI_VALUE ((uint32_t)4000000) /*!< Value of the Internal oscillator in Hz*/ +#if !defined(MSI_VALUE) +#define MSI_VALUE ((uint32_t)4000000) /*!< Value of the Internal oscillator in Hz*/ #endif /* MSI_VALUE */ /** @@ -114,24 +114,24 @@ * This value is used by the RCC HAL module to compute the system frequency * (when HSI is used as system clock source, directly or through the PLL). */ -#if !defined (HSI_VALUE) -#define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz*/ +#if !defined(HSI_VALUE) +#define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz*/ #endif /* HSI_VALUE */ /** * @brief Internal Low Speed oscillator (LSI1) value. */ -#if !defined (LSI1_VALUE) - #define LSI1_VALUE ((uint32_t)32000) /*!< LSI1 Typical Value in Hz*/ -#endif /* LSI1_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz +#if !defined(LSI1_VALUE) +#define LSI1_VALUE ((uint32_t)32000) /*!< LSI1 Typical Value in Hz*/ +#endif /* LSI1_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature.*/ /** * @brief Internal Low Speed oscillator (LSI2) value. */ -#if !defined (LSI2_VALUE) - #define LSI2_VALUE ((uint32_t)32000) /*!< LSI2 Typical Value in Hz*/ -#endif /* LSI2_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz +#if !defined(LSI2_VALUE) +#define LSI2_VALUE ((uint32_t)32000) /*!< LSI2 Typical Value in Hz*/ +#endif /* LSI2_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature.*/ @@ -139,20 +139,20 @@ * @brief External Low Speed oscillator (LSE) value. * This value is used by the UART, RTC HAL module to compute the system frequency */ -#if !defined (LSE_VALUE) -#define LSE_VALUE 32768U /*!< Value of the External oscillator in Hz*/ +#if !defined(LSE_VALUE) +#define LSE_VALUE 32768U /*!< Value of the External oscillator in Hz*/ #endif /* LSE_VALUE */ /** * @brief Internal Multiple Speed oscillator (HSI48) default value. * This value is the default HSI48 range value after Reset. */ -#if !defined (HSI48_VALUE) - #define HSI48_VALUE ((uint32_t)48000000) /*!< Value of the Internal oscillator in Hz*/ +#if !defined(HSI48_VALUE) +#define HSI48_VALUE ((uint32_t)48000000) /*!< Value of the Internal oscillator in Hz*/ #endif /* HSI48_VALUE */ -#if !defined (LSE_STARTUP_TIMEOUT) -#define LSE_STARTUP_TIMEOUT 1000U /*!< Time out for LSE start up, in ms */ +#if !defined(LSE_STARTUP_TIMEOUT) +#define LSE_STARTUP_TIMEOUT 1000U /*!< Time out for LSE start up, in ms */ #endif /* HSE_STARTUP_TIMEOUT */ /** @@ -160,8 +160,9 @@ * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source * frequency. */ -#if !defined (EXTERNAL_SAI1_CLOCK_VALUE) - #define EXTERNAL_SAI1_CLOCK_VALUE ((uint32_t)2097000) /*!< Value of the SAI1 External clock source in Hz*/ +#if !defined(EXTERNAL_SAI1_CLOCK_VALUE) +#define EXTERNAL_SAI1_CLOCK_VALUE \ + ((uint32_t)2097000) /*!< Value of the SAI1 External clock source in Hz*/ #endif /* EXTERNAL_SAI1_CLOCK_VALUE */ /* Tip: To avoid modifying this file each time you need to use different HSE, @@ -172,12 +173,12 @@ * @brief This is the HAL system configuration section */ -#define VDD_VALUE 3300U /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY 15U /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U -#define INSTRUCTION_CACHE_ENABLE 1U -#define DATA_CACHE_ENABLE 1U +#define VDD_VALUE 3300U /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY 15U /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define INSTRUCTION_CACHE_ENABLE 1U +#define DATA_CACHE_ENABLE 1U /* ########################## Assert Selection ############################## */ /** @@ -193,142 +194,142 @@ * Deactivated: CRC code cleaned from driver */ -#define USE_SPI_CRC 0U +#define USE_SPI_CRC 0U /* Includes ------------------------------------------------------------------*/ /** * @brief Include module's header file */ #ifdef HAL_DMA_MODULE_ENABLED - #include "stm32wbxx_hal_dma.h" +#include "stm32wbxx_hal_dma.h" #endif /* HAL_DMA_MODULE_ENABLED */ #ifdef HAL_ADC_MODULE_ENABLED - #include "stm32wbxx_hal_adc.h" +#include "stm32wbxx_hal_adc.h" #endif /* HAL_ADC_MODULE_ENABLED */ #ifdef HAL_COMP_MODULE_ENABLED - #include "stm32wbxx_hal_comp.h" +#include "stm32wbxx_hal_comp.h" #endif /* HAL_COMP_MODULE_ENABLED */ #ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32wbxx_hal_cortex.h" +#include "stm32wbxx_hal_cortex.h" #endif /* HAL_CORTEX_MODULE_ENABLED */ #ifdef HAL_CRC_MODULE_ENABLED - #include "stm32wbxx_hal_crc.h" +#include "stm32wbxx_hal_crc.h" #endif /* HAL_CRC_MODULE_ENABLED */ #ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32wbxx_hal_cryp.h" +#include "stm32wbxx_hal_cryp.h" #endif /* HAL_CRYP_MODULE_ENABLED */ #ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32wbxx_hal_exti.h" +#include "stm32wbxx_hal_exti.h" #endif /* HAL_EXTI_MODULE_ENABLED */ #ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32wbxx_hal_flash.h" +#include "stm32wbxx_hal_flash.h" #endif /* HAL_FLASH_MODULE_ENABLED */ #ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32wbxx_hal_gpio.h" +#include "stm32wbxx_hal_gpio.h" #endif /* HAL_GPIO_MODULE_ENABLED */ #ifdef HAL_HSEM_MODULE_ENABLED - #include "stm32wbxx_hal_hsem.h" +#include "stm32wbxx_hal_hsem.h" #endif /* HAL_HSEM_MODULE_ENABLED */ #ifdef HAL_I2C_MODULE_ENABLED - #include "stm32wbxx_hal_i2c.h" +#include "stm32wbxx_hal_i2c.h" #endif /* HAL_I2C_MODULE_ENABLED */ #ifdef HAL_IPCC_MODULE_ENABLED - #include "stm32wbxx_hal_ipcc.h" +#include "stm32wbxx_hal_ipcc.h" #endif /* HAL_IPCC_MODULE_ENABLED */ #ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32wbxx_hal_irda.h" +#include "stm32wbxx_hal_irda.h" #endif /* HAL_IRDA_MODULE_ENABLED */ #ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32wbxx_hal_iwdg.h" +#include "stm32wbxx_hal_iwdg.h" #endif /* HAL_IWDG_MODULE_ENABLED */ #ifdef HAL_LCD_MODULE_ENABLED - #include "stm32wbxx_hal_lcd.h" +#include "stm32wbxx_hal_lcd.h" #endif /* HAL_LCD_MODULE_ENABLED */ #ifdef HAL_LPTIM_MODULE_ENABLED - #include "stm32wbxx_hal_lptim.h" +#include "stm32wbxx_hal_lptim.h" #endif /* HAL_LPTIM_MODULE_ENABLED */ #ifdef HAL_PCD_MODULE_ENABLED - #include "stm32wbxx_hal_pcd.h" +#include "stm32wbxx_hal_pcd.h" #endif /* HAL_PCD_MODULE_ENABLED */ #ifdef HAL_PKA_MODULE_ENABLED - #include "stm32wbxx_hal_pka.h" +#include "stm32wbxx_hal_pka.h" #endif /* HAL_PKA_MODULE_ENABLED */ #ifdef HAL_PWR_MODULE_ENABLED - #include "stm32wbxx_hal_pwr.h" +#include "stm32wbxx_hal_pwr.h" #endif /* HAL_PWR_MODULE_ENABLED */ #ifdef HAL_QSPI_MODULE_ENABLED - #include "stm32wbxx_hal_qspi.h" +#include "stm32wbxx_hal_qspi.h" #endif /* HAL_QSPI_MODULE_ENABLED */ #ifdef HAL_RCC_MODULE_ENABLED - #include "stm32wbxx_hal_rcc.h" +#include "stm32wbxx_hal_rcc.h" #endif /* HAL_RCC_MODULE_ENABLED */ #ifdef HAL_RNG_MODULE_ENABLED - #include "stm32wbxx_hal_rng.h" +#include "stm32wbxx_hal_rng.h" #endif /* HAL_RNG_MODULE_ENABLED */ #ifdef HAL_RTC_MODULE_ENABLED - #include "stm32wbxx_hal_rtc.h" +#include "stm32wbxx_hal_rtc.h" #endif /* HAL_RTC_MODULE_ENABLED */ #ifdef HAL_SAI_MODULE_ENABLED - #include "stm32wbxx_hal_sai.h" +#include "stm32wbxx_hal_sai.h" #endif /* HAL_SAI_MODULE_ENABLED */ #ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32wbxx_hal_smartcard.h" +#include "stm32wbxx_hal_smartcard.h" #endif /* HAL_SMARTCARD_MODULE_ENABLED */ #ifdef HAL_SMBUS_MODULE_ENABLED - #include "stm32wbxx_hal_smbus.h" +#include "stm32wbxx_hal_smbus.h" #endif /* HAL_SMBUS_MODULE_ENABLED */ #ifdef HAL_SPI_MODULE_ENABLED - #include "stm32wbxx_hal_spi.h" +#include "stm32wbxx_hal_spi.h" #endif /* HAL_SPI_MODULE_ENABLED */ #ifdef HAL_TIM_MODULE_ENABLED - #include "stm32wbxx_hal_tim.h" +#include "stm32wbxx_hal_tim.h" #endif /* HAL_TIM_MODULE_ENABLED */ #ifdef HAL_TSC_MODULE_ENABLED - #include "stm32wbxx_hal_tsc.h" +#include "stm32wbxx_hal_tsc.h" #endif /* HAL_TSC_MODULE_ENABLED */ #ifdef HAL_UART_MODULE_ENABLED - #include "stm32wbxx_hal_uart.h" +#include "stm32wbxx_hal_uart.h" #endif /* HAL_UART_MODULE_ENABLED */ #ifdef HAL_USART_MODULE_ENABLED - #include "stm32wbxx_hal_usart.h" +#include "stm32wbxx_hal_usart.h" #endif /* HAL_USART_MODULE_ENABLED */ #ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32wbxx_hal_wwdg.h" +#include "stm32wbxx_hal_wwdg.h" #endif /* HAL_WWDG_MODULE_ENABLED */ /* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT +#ifdef USE_FULL_ASSERT /** * @brief The assert_param macro is used for function's parameters check. * @param expr If expr is false, it calls assert_failed function @@ -337,11 +338,11 @@ * If expr is true, it returns no value. * @retval None */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t*)__FILE__, __LINE__)) /* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); +void assert_failed(uint8_t* file, uint32_t line); #else - #define assert_param(expr) ((void)0U) +#define assert_param(expr) ((void)0U) #endif /* USE_FULL_ASSERT */ #ifdef __cplusplus |