Version 1.12

Enhancements
=========
Added support for RTD temperature sensors
When cancelling a print, if cancel.g exists then run it instead of
turning heaters off
Improved file upload speed over the web interface
Chamber heater is now exempted from timeout
Pressure advance now reduces maximum extruder jerk setting by a smaller
amount when the extruder steps/mm is high
The Duet no longer reports itself as an Arduino Due and has its own
Windows driver
Added experimental "maximum average printing acceleration" feature
Try to improve speed of getting file information in Print Monitor

Bug fixes
======
Simulation mode was not working properly
External driver support code sometimes failed to enable the associated
drives
Fixed potential overflow if a user attempted to use non-existent driver
9 on a Duet 0.6
M408 status requests were not handled when in simulation mode
Removed hard coded PATH in project

2 files changed, 86 insertions, 0 deletions

diff --git a/Driver/duet.inf b/Driver/duet.inf
new file mode 100644
index 00000000..2c323630
--- /dev/null
+++ b/Driver/duet.inf
@@ -0,0 +1,86 @@
+; Windows 2000, XP, Vista, 7 and 8 (x32 and x64) setup file for Duet 3D printer control electronics
+; Copyright (c) 2000-2013 ATMEL, Inc.
+
+[Version] 
+Signature   = "$Windows NT$" 
+Class       = Ports 
+ClassGuid   = {4D36E978-E325-11CE-BFC1-08002BE10318} 
+
+Provider    = %Provider% 
+CatalogFile = duetinf.cat
+DriverVer   = 05/01/2016,1.12.0.0 
+
+;----------------------------------------------------------
+; Targets
+;----------------------------------------------------------
+[Manufacturer] 
+%Provider%=DeviceList, NTAMD64, NT 
+
+[DeviceList] 
+%DUET%=DriverInstall, USB\VID_03EB&PID_2404 
+
+[DeviceList.NTAMD64]
+%DUET%=DriverInstall.NTamd64, USB\VID_03EB&PID_2404 
+
+[DeviceList.NT]
+%DUET%=DriverInstall.NT, USB\VID_03EB&PID_2404 
+
+;------------------------------------------------------------
+; Windows XP, Vista, Windows 7, Windows 8, Windows 10 - 32bit
+;------------------------------------------------------------
+[DestinationDirs] 
+DefaultDestDir=12 
+FakeModemCopyFileSection=12 
+
+[DriverInstall.NT] 
+include=mdmcpq.inf
+CopyFiles=FakeModemCopyFileSection
+AddReg=DriverInstall.NT.AddReg 
+
+[DriverInstall.NT.AddReg]
+HKR,,DevLoader,,*ntkern 
+HKR,,NTMPDriver,,usbser.sys 
+HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider" 
+
+[DriverInstall.NT.Services] 
+AddService = usbser, 0x00000002, DriverService.NT 
+
+[DriverService.NT] 
+DisplayName = %Serial.SvcDesc% 
+ServiceType = 1 ; SERVICE_KERNEL_DRIVER 
+StartType = 3 ; SERVICE_DEMAND_START 
+ErrorControl = 1 ; SERVICE_ERROR_NORMAL 
+ServiceBinary = %12%\usbser.sys 
+LoadOrderGroup = Base 
+
+;------------------------------------------------------------
+; Windows XP, Vista, Windows 7, Windows 8, Windows 10 - 64bit
+;------------------------------------------------------------
+[DriverInstall.NTamd64]
+include=mdmcpq.inf
+CopyFiles=FakeModemCopyFileSection
+AddReg=DriverInstall.NTamd64.AddReg
+
+[DriverInstall.NTamd64.AddReg]
+HKR,,DevLoader,,*ntkern
+HKR,,NTMPDriver,,usbser.sys
+HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
+
+[DriverInstall.NTamd64.Services]
+AddService=usbser, 0x00000002, DriverService.NTamd64
+
+[DriverService.NTamd64]
+DisplayName=%Serial.SvcDesc%
+ServiceType=1
+StartType=3
+ErrorControl=1
+ServiceBinary=%12%\usbser.sys
+
+;----------------------------------------------------------
+; String
+;----------------------------------------------------------
+[Strings] 
+Provider = "Duet 3D printer electronics driver" 
+DUET = "Duet 3D printer control electronics"
+Serial.SvcDesc = "USB Serial emulation driver" 
+
diff --git a/Driver/duetinf.cat b/Driver/duetinf.cat
new file mode 100644
index 00000000..387ff227
--- /dev/null
+++ b/Driver/duetinf.cat