Adding block controllers for arm k20/sam clockless chips

1 files changed, 31 insertions, 12 deletions

diff --git a/examples/Cylon/Cylon.ino b/examples/Cylon/Cylon.ino
index dfb6ed78..ea102095 100644
--- a/examples/Cylon/Cylon.ino
+++ b/examples/Cylon/Cylon.ino
@@ -1,7 +1,7 @@
 #include "FastLED.h"
 
 // How many leds in your strip?
-#define NUM_LEDS 40
+#define NUM_LEDS 64 
 
 // For led chips like Neopixels, which have a data line, ground, and power, you just
 // need to define DATA_PIN.  For led chipsets that are SPI based (four wires - data, clock,
@@ -10,34 +10,53 @@
 #define CLOCK_PIN 13
 
 // Define the array of leds
-CRGB leds[NUM_LEDS];
+CRGB leds[(NUM_LEDS * 16)+1];
 
 void setup() { 
-	FastLED.addLeds<NEOPIXEL,DATA_PIN>(leds, NUM_LEDS);
+	Serial.begin(19200);
+	delay(3000);
+	Serial.println("resetting");
+	delay(500); Serial.print(".");
+	delay(500); Serial.print(".");
+	delay(500); Serial.print(".");
+	delay(500); Serial.print(".");
+	delay(500); Serial.print(".");
+	delay(500); Serial.print(".");
+	delay(500); Serial.print(".");
+	delay(500); Serial.print(".");
+	LEDS.addLeds<WS2811_PORTC,24>(leds, NUM_LEDS); // .setDither(DISABLE_DITHER);
+	// LEDS.addLeds<NEOPIXEL,33>(leds,NUM_LEDS);
+	Serial.println("Entering loopx");
 }
 
+void fadeall() { for(int i = 0; i < NUM_LEDS*16; i++) { leds[i].nscale8(250); } }
+
 void loop() { 
+	uint8_t hue = 0;
+	// Serial.print("x");
 	// First slide the led in one direction
-	for(int i = 0; i < NUM_LEDS; i++) {
+	for(int i = 0; i < NUM_LEDS*5; i++) {
 		// Set the i'th led to red 
-		leds[i] = CRGB::Red;
+		leds[i] = CHSV(hue++, 255, 255);
 		// Show the leds
-		FastLED.show();
+		FastLED.show(); 
 		// now that we've shown the leds, reset the i'th led to black
-		leds[i] = CRGB::Black;
+		// leds[i] = CRGB::Black;
+		fadeall();
 		// Wait a little bit before we loop around and do it again
-		delay(30);
+		delay(10);
 	}
 
 	// Now go in the other direction.  
-	for(int i = NUM_LEDS-1; i >= 0; i--) {
+	for(int i = (NUM_LEDS*5)-1; i >= 0; i--) {
 		// Set the i'th led to red 
-		leds[i] = CRGB::Red;
+		leds[i] = CHSV(hue++, 255, 255);
 		// Show the leds
 		FastLED.show();
 		// now that we've shown the leds, reset the i'th led to black
-		leds[i] = CRGB::Black;
+		// leds[i] = CRGB::Black;
+		fadeall();
 		// Wait a little bit before we loop around and do it again
-		delay(30);
+		delay(10);
 	}
 }