diff options
Diffstat (limited to 'Projects/NUCLEO-WB35CE/Demonstrations/Adafruit_LCD_1_8_SD_Joystick/FATFS/Target/ffconf.h')
| -rw-r--r-- | Projects/NUCLEO-WB35CE/Demonstrations/Adafruit_LCD_1_8_SD_Joystick/FATFS/Target/ffconf.h | 268 |
1 files changed, 268 insertions, 0 deletions
diff --git a/Projects/NUCLEO-WB35CE/Demonstrations/Adafruit_LCD_1_8_SD_Joystick/FATFS/Target/ffconf.h b/Projects/NUCLEO-WB35CE/Demonstrations/Adafruit_LCD_1_8_SD_Joystick/FATFS/Target/ffconf.h new file mode 100644 index 000000000..24f266d6a --- /dev/null +++ b/Projects/NUCLEO-WB35CE/Demonstrations/Adafruit_LCD_1_8_SD_Joystick/FATFS/Target/ffconf.h @@ -0,0 +1,268 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * FatFs - Generic FAT file system module R0.12c (C)ChaN, 2017 + ****************************************************************************** + * @attention + * + * <h2><center>© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +#ifndef _FFCONF +#define _FFCONF 68300 /* Revision ID */ + +/*-----------------------------------------------------------------------------/ +/ Additional user header to be used +/-----------------------------------------------------------------------------*/ +#include "main.h" +#include "stm32wbxx_hal.h" + +/*-----------------------------------------------------------------------------/ +/ Function Configurations +/-----------------------------------------------------------------------------*/ + +#define _FS_READONLY 0 /* 0:Read/Write or 1:Read only */ +/* This option switches read-only configuration. (0:Read/Write or 1:Read-only) +/ Read-only configuration removes writing API functions, f_write(), f_sync(), +/ f_unlink(), f_mkdir(), f_chmod(), f_rename(), f_truncate(), f_getfree() +/ and optional writing functions as well. */ + +#define _FS_MINIMIZE 0 /* 0 to 3 */ +/* This option defines minimization level to remove some basic API functions. +/ +/ 0: All basic functions are enabled. +/ 1: f_stat(), f_getfree(), f_unlink(), f_mkdir(), f_truncate() and f_rename() +/ are removed. +/ 2: f_opendir(), f_readdir() and f_closedir() are removed in addition to 1. +/ 3: f_lseek() function is removed in addition to 2. */ + +#define _USE_STRFUNC 0 /* 0:Disable or 1-2:Enable */ +/* This option switches string functions, f_gets(), f_putc(), f_puts() and +/ f_printf(). +/ +/ 0: Disable string functions. +/ 1: Enable without LF-CRLF conversion. +/ 2: Enable with LF-CRLF conversion. */ + +#define _USE_FIND 1 +/* This option switches filtered directory read functions, f_findfirst() and +/ f_findnext(). (0:Disable, 1:Enable 2:Enable with matching altname[] too) */ + +#define _USE_MKFS 1 +/* This option switches f_mkfs() function. (0:Disable or 1:Enable) */ + +#define _USE_FASTSEEK 1 +/* This option switches fast seek feature. (0:Disable or 1:Enable) */ + +#define _USE_EXPAND 0 +/* This option switches f_expand function. (0:Disable or 1:Enable) */ + +#define _USE_CHMOD 0 +/* This option switches attribute manipulation functions, f_chmod() and f_utime(). +/ (0:Disable or 1:Enable) Also _FS_READONLY needs to be 0 to enable this option. */ + +#define _USE_LABEL 0 +/* This option switches volume label functions, f_getlabel() and f_setlabel(). +/ (0:Disable or 1:Enable) */ + +#define _USE_FORWARD 0 +/* This option switches f_forward() function. (0:Disable or 1:Enable) */ + +/*-----------------------------------------------------------------------------/ +/ Locale and Namespace Configurations +/-----------------------------------------------------------------------------*/ + +#define _CODE_PAGE 850 +/* This option specifies the OEM code page to be used on the target system. +/ Incorrect setting of the code page can cause a file open failure. +/ +/ 1 - ASCII (No extended character. Non-LFN cfg. only) +/ 437 - U.S. +/ 720 - Arabic +/ 737 - Greek +/ 771 - KBL +/ 775 - Baltic +/ 850 - Latin 1 +/ 852 - Latin 2 +/ 855 - Cyrillic +/ 857 - Turkish +/ 860 - Portuguese +/ 861 - Icelandic +/ 862 - Hebrew +/ 863 - Canadian French +/ 864 - Arabic +/ 865 - Nordic +/ 866 - Russian +/ 869 - Greek 2 +/ 932 - Japanese (DBCS) +/ 936 - Simplified Chinese (DBCS) +/ 949 - Korean (DBCS) +/ 950 - Traditional Chinese (DBCS) +*/ + +#define _USE_LFN 3 /* 0 to 3 */ +#define _MAX_LFN 255 /* Maximum LFN length to handle (12 to 255) */ +/* The _USE_LFN switches the support of long file name (LFN). +/ +/ 0: Disable support of LFN. _MAX_LFN has no effect. +/ 1: Enable LFN with static working buffer on the BSS. Always NOT thread-safe. +/ 2: Enable LFN with dynamic working buffer on the STACK. +/ 3: Enable LFN with dynamic working buffer on the HEAP. +/ +/ To enable the LFN, Unicode handling functions (option/unicode.c) must be added +/ to the project. The working buffer occupies (_MAX_LFN + 1) * 2 bytes and +/ additional 608 bytes at exFAT enabled. _MAX_LFN can be in range from 12 to 255. +/ It should be set 255 to support full featured LFN operations. +/ When use stack for the working buffer, take care on stack overflow. When use heap +/ memory for the working buffer, memory management functions, ff_memalloc() and +/ ff_memfree(), must be added to the project. */ + +#define _LFN_UNICODE 0 /* 0:ANSI/OEM or 1:Unicode */ +/* This option switches character encoding on the API. (0:ANSI/OEM or 1:UTF-16) +/ To use Unicode string for the path name, enable LFN and set _LFN_UNICODE = 1. +/ This option also affects behavior of string I/O functions. */ + +#define _STRF_ENCODE 3 +/* When _LFN_UNICODE == 1, this option selects the character encoding ON THE FILE to +/ be read/written via string I/O functions, f_gets(), f_putc(), f_puts and f_printf(). +/ +/ 0: ANSI/OEM +/ 1: UTF-16LE +/ 2: UTF-16BE +/ 3: UTF-8 +/ +/ This option has no effect when _LFN_UNICODE == 0. */ + +#define _FS_RPATH 0 /* 0 to 2 */ +/* This option configures support of relative path. +/ +/ 0: Disable relative path and remove related functions. +/ 1: Enable relative path. f_chdir() and f_chdrive() are available. +/ 2: f_getcwd() function is available in addition to 1. +*/ + +/*---------------------------------------------------------------------------/ +/ Drive/Volume Configurations +/----------------------------------------------------------------------------*/ + +#define _VOLUMES 2 +/* Number of volumes (logical drives) to be used. */ + +/* USER CODE BEGIN Volumes */ +#define _STR_VOLUME_ID 0 /* 0:Use only 0-9 for drive ID, 1:Use strings for drive ID */ +#define _VOLUME_STRS "RAM","NAND","CF","SD1","SD2","USB1","USB2","USB3" +/* _STR_VOLUME_ID switches string support of volume ID. +/ When _STR_VOLUME_ID is set to 1, also pre-defined strings can be used as drive +/ number in the path name. _VOLUME_STRS defines the drive ID strings for each +/ logical drives. Number of items must be equal to _VOLUMES. Valid characters for +/ the drive ID strings are: A-Z and 0-9. */ +/* USER CODE END Volumes */ + +#define _MULTI_PARTITION 0 /* 0:Single partition, 1:Multiple partition */ +/* This option switches support of multi-partition on a physical drive. +/ By default (0), each logical drive number is bound to the same physical drive +/ number and only an FAT volume found on the physical drive will be mounted. +/ When multi-partition is enabled (1), each logical drive number can be bound to +/ arbitrary physical drive and partition listed in the VolToPart[]. Also f_fdisk() +/ funciton will be available. */ +#define _MIN_SS 512 /* 512, 1024, 2048 or 4096 */ +#define _MAX_SS 512 /* 512, 1024, 2048 or 4096 */ +/* These options configure the range of sector size to be supported. (512, 1024, +/ 2048 or 4096) Always set both 512 for most systems, all type of memory cards and +/ harddisk. But a larger value may be required for on-board flash memory and some +/ type of optical media. When _MAX_SS is larger than _MIN_SS, FatFs is configured +/ to variable sector size and GET_SECTOR_SIZE command must be implemented to the +/ disk_ioctl() function. */ + +#define _USE_TRIM 0 +/* This option switches support of ATA-TRIM. (0:Disable or 1:Enable) +/ To enable Trim function, also CTRL_TRIM command should be implemented to the +/ disk_ioctl() function. */ + +#define _FS_NOFSINFO 0 /* 0,1,2 or 3 */ +/* If you need to know correct free space on the FAT32 volume, set bit 0 of this +/ option, and f_getfree() function at first time after volume mount will force +/ a full FAT scan. Bit 1 controls the use of last allocated cluster number. +/ +/ bit0=0: Use free cluster count in the FSINFO if available. +/ bit0=1: Do not trust free cluster count in the FSINFO. +/ bit1=0: Use last allocated cluster number in the FSINFO if available. +/ bit1=1: Do not trust last allocated cluster number in the FSINFO. +*/ + +/*---------------------------------------------------------------------------/ +/ System Configurations +/----------------------------------------------------------------------------*/ + +#define _FS_TINY 0 /* 0:Normal or 1:Tiny */ +/* This option switches tiny buffer configuration. (0:Normal or 1:Tiny) +/ At the tiny configuration, size of file object (FIL) is reduced _MAX_SS bytes. +/ Instead of private sector buffer eliminated from the file object, common sector +/ buffer in the file system object (FATFS) is used for the file data transfer. */ + +#define _FS_EXFAT 0 +/* This option switches support of exFAT file system. (0:Disable or 1:Enable) +/ When enable exFAT, also LFN needs to be enabled. (_USE_LFN >= 1) +/ Note that enabling exFAT discards C89 compatibility. */ + +#define _FS_NORTC 0 +#define _NORTC_MON 6 +#define _NORTC_MDAY 4 +#define _NORTC_YEAR 2015 +/* The option _FS_NORTC switches timestamp functiton. If the system does not have +/ any RTC function or valid timestamp is not needed, set _FS_NORTC = 1 to disable +/ the timestamp function. All objects modified by FatFs will have a fixed timestamp +/ defined by _NORTC_MON, _NORTC_MDAY and _NORTC_YEAR in local time. +/ To enable timestamp function (_FS_NORTC = 0), get_fattime() function need to be +/ added to the project to get current time form real-time clock. _NORTC_MON, +/ _NORTC_MDAY and _NORTC_YEAR have no effect. +/ These options have no effect at read-only configuration (_FS_READONLY = 1). */ + +#define _FS_LOCK 12 /* 0:Disable or >=1:Enable */ +/* The option _FS_LOCK switches file lock function to control duplicated file open +/ and illegal operation to open objects. This option must be 0 when _FS_READONLY +/ is 1. +/ +/ 0: Disable file lock function. To avoid volume corruption, application program +/ should avoid illegal open, remove and rename to the open objects. +/ >0: Enable file lock function. The value defines how many files/sub-directories +/ can be opened simultaneously under file lock control. Note that the file +/ lock control is independent of re-entrancy. */ + +#define _FS_REENTRANT 0 /* 0:Disable or 1:Enable */ +#define _FS_TIMEOUT 1000 /* Timeout period in unit of time ticks */ +#define _SYNC_t NULL +/* The option _FS_REENTRANT switches the re-entrancy (thread safe) of the FatFs +/ module itself. Note that regardless of this option, file access to different +/ volume is always re-entrant and volume control functions, f_mount(), f_mkfs() +/ and f_fdisk() function, are always not re-entrant. Only file/directory access +/ to the same volume is under control of this function. +/ +/ 0: Disable re-entrancy. _FS_TIMEOUT and _SYNC_t have no effect. +/ 1: Enable re-entrancy. Also user provided synchronization handlers, +/ ff_req_grant(), ff_rel_grant(), ff_del_syncobj() and ff_cre_syncobj() +/ function, must be added to the project. Samples are available in +/ option/syscall.c. +/ +/ The _FS_TIMEOUT defines timeout period in unit of time tick. +/ The _SYNC_t defines O/S dependent sync object type. e.g. HANDLE, ID, OS_EVENT*, +/ SemaphoreHandle_t and etc.. A header file for O/S definitions needs to be +/ included somewhere in the scope of ff.h. */ + +/* define the ff_malloc ff_free macros as standard malloc free */ +#if !defined(ff_malloc) && !defined(ff_free) +#include <stdlib.h> +#define ff_malloc malloc +#define ff_free free +#endif + +#endif /* _FFCONF */ |