1 files changed, 156 insertions, 0 deletions
diff --git a/Projects/NUCLEO-WB35CE/Examples/ADC/ADC_SingleConversion_TriggerSW_IT/Src/stm32wbxx_hal_msp.c b/Projects/NUCLEO-WB35CE/Examples/ADC/ADC_SingleConversion_TriggerSW_IT/Src/stm32wbxx_hal_msp.c
new file mode 100644
index 000000000..f8f532304
--- /dev/null
+++ b/Projects/NUCLEO-WB35CE/Examples/ADC/ADC_SingleConversion_TriggerSW_IT/Src/stm32wbxx_hal_msp.c
@@ -0,0 +1,156 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    Examples/ADC/ADC_SingleConversion_TriggerSW_IT/Src/stm32wbxx_hal_msp.c
+  * @author  MCD Application Team
+  * @brief   HAL MSP module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics. 
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the 
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN TD */
+
+/* USER CODE END TD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN Define */
+ 
+/* USER CODE END Define */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN Macro */
+
+/* USER CODE END Macro */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* External functions --------------------------------------------------------*/
+/* USER CODE BEGIN ExternalFunctions */
+
+/* USER CODE END ExternalFunctions */
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+/**
+  * Initializes the Global MSP.
+  */
+void HAL_MspInit(void)
+{
+  /* USER CODE BEGIN MspInit 0 */
+
+  /* USER CODE END MspInit 0 */
+
+  /* System interrupt init*/
+
+  /* USER CODE BEGIN MspInit 1 */
+
+  /* USER CODE END MspInit 1 */
+}
+
+/* USER CODE BEGIN 1 */
+
+/**
+  * @brief ADC MSP initialization
+  *        This function configures the hardware resources used in this example:
+  *          - Enable clock of ADC peripheral
+  *          - Configure the GPIO associated to the peripheral channels
+  *          - Configure the DMA associated to the peripheral
+  *          - Configure the NVIC associated to the peripheral interruptions
+  * @param hadc: ADC handle pointer
+  * @retval None
+  */
+void HAL_ADC_MspInit(ADC_HandleTypeDef *hadc)
+{
+  GPIO_InitTypeDef          GPIO_InitStruct;
+  
+  /*##-1- Enable peripherals and GPIO Clocks #################################*/
+  /* Enable clock of GPIO associated to the peripheral channels */
+  ADCx_CHANNELa_GPIO_CLK_ENABLE();
+  
+  /* Enable clock of ADCx peripheral (core clock) */
+  ADCx_CLK_ENABLE();
+  
+  /* Note: In case of usage of asynchronous clock for ADC, with ADC setting   */
+  /*       "AdcHandle.Init.ClockPrescaler = ADC_CLOCK_ASYNC_DIVx",            */
+  /*       the clock source has to be enabled at RCC top level using function */
+  /*       "HAL_RCCEx_PeriphCLKConfig()" or macro "__HAL_RCC_ADC_CONFIG()"    */
+  /*       (refer to comments in driver file header).                         */
+
+  /*##-2- Configure peripheral GPIO ##########################################*/
+  /* Configure GPIO pin of the selected ADC channel */
+  GPIO_InitStruct.Pin = ADCx_CHANNELa_PIN;
+  GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  HAL_GPIO_Init(ADCx_CHANNELa_GPIO_PORT, &GPIO_InitStruct);
+  
+  /*##-4- Configure the NVIC #################################################*/
+  /* NVIC configuration for ADC interrupt */
+  /* Priority: high-priority */
+  HAL_NVIC_SetPriority(ADCx_IRQn, 0, 0);
+  HAL_NVIC_EnableIRQ(ADCx_IRQn);
+}
+
+/**
+  * @brief ADC MSP de-initialization
+  *        This function frees the hardware resources used in this example:
+  *          - Disable clock of ADC peripheral
+  *          - Revert GPIO associated to the peripheral channels to their default state
+  *          - Revert DMA associated to the peripheral to its default state
+  *          - Revert NVIC associated to the peripheral interruptions to its default state
+  * @param hadc: ADC handle pointer
+  * @retval None
+  */
+void HAL_ADC_MspDeInit(ADC_HandleTypeDef *hadc)
+{
+  /*##-1- Reset peripherals ##################################################*/
+  ADCx_FORCE_RESET();
+  ADCx_RELEASE_RESET();
+
+  /*##-2- Disable peripherals and GPIO Clocks ################################*/
+  /* De-initialize GPIO pin of the selected ADC channel */
+  HAL_GPIO_DeInit(ADCx_CHANNELa_GPIO_PORT, ADCx_CHANNELa_PIN);
+
+  /*##-3- Disable the DMA ####################################################*/
+  /* De-Initialize the DMA associated to the peripheral */
+  if(hadc->DMA_Handle != NULL)
+  {
+    HAL_DMA_DeInit(hadc->DMA_Handle);
+  }
+
+  /*##-4- Disable the NVIC ###################################################*/
+  /* Disable the NVIC configuration for ADC interrupt */
+  HAL_NVIC_DisableIRQ(ADCx_IRQn);
+  
+}
+
+
+/* USER CODE END 1 */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/