diff options
Diffstat (limited to 'Projects/NUCLEO-WB35CE/Examples_LL/PWR/PWR_EnterStandbyMode/Inc/main.h')
-rw-r--r-- | Projects/NUCLEO-WB35CE/Examples_LL/PWR/PWR_EnterStandbyMode/Inc/main.h | 124 |
1 files changed, 124 insertions, 0 deletions
diff --git a/Projects/NUCLEO-WB35CE/Examples_LL/PWR/PWR_EnterStandbyMode/Inc/main.h b/Projects/NUCLEO-WB35CE/Examples_LL/PWR/PWR_EnterStandbyMode/Inc/main.h new file mode 100644 index 000000000..ad999b884 --- /dev/null +++ b/Projects/NUCLEO-WB35CE/Examples_LL/PWR/PWR_EnterStandbyMode/Inc/main.h @@ -0,0 +1,124 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file Examples_LL/PWR/PWR_EnterStandbyMode/Inc/main.h + * @author MCD Application Team + * @brief Header for main.c module + ****************************************************************************** + * @attention + * + * <h2><center>© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __MAIN_H +#define __MAIN_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wbxx_ll_crs.h" +#include "stm32wbxx_ll_rcc.h" +#include "stm32wbxx_ll_bus.h" +#include "stm32wbxx_ll_system.h" +#include "stm32wbxx_ll_exti.h" +#include "stm32wbxx_ll_cortex.h" +#include "stm32wbxx_ll_utils.h" +#include "stm32wbxx_ll_pwr.h" +#include "stm32wbxx_ll_dma.h" +#include "stm32wbxx_ll_gpio.h" + +#if defined(USE_FULL_ASSERT) +#include "stm32_assert.h" +#endif /* USE_FULL_ASSERT */ + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ + +/* USER CODE END ET */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ + + +/** + * @brief Toggle periods for various blinking modes + */ + +#define LED_BLINK_FAST 200 +#define LED_BLINK_SLOW 500 +#define LED_BLINK_ERROR 1000 + + +/** + * @brief Key push-button + */ +#define USER_BUTTON_PIN LL_GPIO_PIN_0 +#define USER_BUTTON_GPIO_PORT GPIOA +#define USER_BUTTON_GPIO_CLK_ENABLE() LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOA); +#define USER_BUTTON_EXTI_LINE LL_EXTI_LINE_0 +#define USER_BUTTON_EXTI_IRQn EXTI0_IRQn +#define USER_BUTTON_EXTI_LINE_ENABLE() LL_EXTI_EnableIT_0_31(USER_BUTTON_EXTI_LINE) +#define USER_BUTTON_EXTI_FALLING_TRIG_ENABLE() LL_EXTI_EnableFallingTrig_0_31(USER_BUTTON_EXTI_LINE) +#define USER_BUTTON_EXTI_RISING_TRIG_ENABLE() LL_EXTI_EnableRisingTrig_0_31(USER_BUTTON_EXTI_LINE) +#define USER_BUTTON_SYSCFG_SET_EXTI() LL_SYSCFG_SetEXTISource(LL_SYSCFG_EXTI_PORTA, LL_SYSCFG_EXTI_LINE0); +#define USER_BUTTON_IRQHANDLER EXTI0_IRQHandler + +/* USER CODE END EC */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ + +/* USER CODE END EM */ + +/* Exported functions prototypes ---------------------------------------------*/ +void Error_Handler(void); + +/* USER CODE BEGIN EFP */ +/* IRQ Handler treatment. User BUTTON handler treatment */ +void UserButton_Callback(void); + +/* USER CODE END EFP */ + +/* Private defines -----------------------------------------------------------*/ +#define LED2_Pin LL_GPIO_PIN_0 +#define LED2_GPIO_Port GPIOB +#ifndef NVIC_PRIORITYGROUP_0 +#define NVIC_PRIORITYGROUP_0 ((uint32_t)0x00000007) /*!< 0 bit for pre-emption priority, + 4 bits for subpriority */ +#define NVIC_PRIORITYGROUP_1 ((uint32_t)0x00000006) /*!< 1 bit for pre-emption priority, + 3 bits for subpriority */ +#define NVIC_PRIORITYGROUP_2 ((uint32_t)0x00000005) /*!< 2 bits for pre-emption priority, + 2 bits for subpriority */ +#define NVIC_PRIORITYGROUP_3 ((uint32_t)0x00000004) /*!< 3 bits for pre-emption priority, + 1 bit for subpriority */ +#define NVIC_PRIORITYGROUP_4 ((uint32_t)0x00000003) /*!< 4 bits for pre-emption priority, + 0 bit for subpriority */ +#endif +/* USER CODE BEGIN Private defines */ + +/* USER CODE END Private defines */ + +#ifdef __cplusplus +} +#endif + +#endif /* __MAIN_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |