diff options
Diffstat (limited to 'Projects/NUCLEO-WB35CE/Examples_LL/UTILS/UTILS_ReadDeviceInfo/readme.txt')
-rw-r--r-- | Projects/NUCLEO-WB35CE/Examples_LL/UTILS/UTILS_ReadDeviceInfo/readme.txt | 60 |
1 files changed, 60 insertions, 0 deletions
diff --git a/Projects/NUCLEO-WB35CE/Examples_LL/UTILS/UTILS_ReadDeviceInfo/readme.txt b/Projects/NUCLEO-WB35CE/Examples_LL/UTILS/UTILS_ReadDeviceInfo/readme.txt new file mode 100644 index 000000000..d076cbb23 --- /dev/null +++ b/Projects/NUCLEO-WB35CE/Examples_LL/UTILS/UTILS_ReadDeviceInfo/readme.txt @@ -0,0 +1,60 @@ +/** + @page UTILS_ReadDeviceInfo UTILS example + + @verbatim + ****************************************************************************** + * @file Examples_LL/UTILS/UTILS_ReadDeviceInfo/readme.txt + * @author MCD Application Team + * @brief Description of the UTILS example. + ****************************************************************************** + * + * Copyright (c) 2019 STMicroelectronics. All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + @endverbatim + +@par Example Description + +This example reads the UID, Device ID and Revision ID and saves +them into a global information buffer. + +Then UID, Device ID and Revision ID will be saved in following global variables: +- aShowDeviceID: Device identifier +- aShowRevisionID: Revision identifier (This field indicates the revision of the device. + For example, it is read as 0x1000 for Revision 1.0) +- aShowCoordinate: X and Y coordinates on the wafer expressed in BCD format +- aShowWaferNumber: WAF_NUM[7:0], Wafer number (8-bit unsigned number) +- aShowLotNumber: LOT_NUM[55:0], Lot number (ASCII encoded) + +@par Directory contents + + - UTILS/UTILS_ReadDeviceInfo/Inc/stm32wbxx_it.h Interrupt handlers header file + - UTILS/UTILS_ReadDeviceInfo/Inc/main.h Header for main.c module + - UTILS/UTILS_ReadDeviceInfo/Inc/stm32_assert.h Template file to include assert_failed function + - UTILS/UTILS_ReadDeviceInfo/Src/stm32wbxx_it.c Interrupt handlers + - UTILS/UTILS_ReadDeviceInfo/Src/main.c Main program + - UTILS/UTILS_ReadDeviceInfo/Src/system_stm32wbxx.c STM32WBxx system source file + + +@par Hardware and Software environment + + - This example runs on STM32WB35CEUx devices. + + - This example has been tested with NUCLEO-WB35CE board and can be + easily tailored to any other supported device and development board. + + +@par How to use it ? + +In order to make the program work, you must do the following : + - Open your preferred toolchain + - Rebuild all files and load your image into target memory + - Run the example + + * <h3><center>© COPYRIGHT STMicroelectronics</center></h3> + */ |