diff options
Diffstat (limited to 'Projects/P-NUCLEO-WB55.Nucleo/Applications/BLE/BLE_MeshLightingProvisioner/STM32_WPAN/app/mesh_cfg_usr.h.ref')
| -rw-r--r-- | Projects/P-NUCLEO-WB55.Nucleo/Applications/BLE/BLE_MeshLightingProvisioner/STM32_WPAN/app/mesh_cfg_usr.h.ref | 607 |
1 files changed, 607 insertions, 0 deletions
diff --git a/Projects/P-NUCLEO-WB55.Nucleo/Applications/BLE/BLE_MeshLightingProvisioner/STM32_WPAN/app/mesh_cfg_usr.h.ref b/Projects/P-NUCLEO-WB55.Nucleo/Applications/BLE/BLE_MeshLightingProvisioner/STM32_WPAN/app/mesh_cfg_usr.h.ref new file mode 100644 index 000000000..2590ee1a5 --- /dev/null +++ b/Projects/P-NUCLEO-WB55.Nucleo/Applications/BLE/BLE_MeshLightingProvisioner/STM32_WPAN/app/mesh_cfg_usr.h.ref @@ -0,0 +1,607 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file mesh_cfg_usr.h + * @author BLE Mesh Team + * @brief Header file for mesh_usr_cfg.c + ****************************************************************************** + * @attention + * + * <h2><center>© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __MESH_CFG_USR_H +#define __MESH_CFG_USR_H + +/* Includes ------------------------------------------------------------------*/ +#include "ble_mesh.h" + +/* Exported macro ------------------------------------------------------------*/ + +/* +* Different features supported by BLE-Mesh. Uncomment according to application. +* Low power feature enabled node do not support other features. +* Do not define any other feature if Low Power feature is defined +*/ +#define ENABLE_RELAY_FEATURE +#define ENABLE_PROXY_FEATURE +#define ENABLE_FRIEND_FEATURE +//#define ENABLE_PROVISIONER_FEATURE +#define DYNAMIC_PROVISIONER + +/* Macros Used for user defined serial print data for models. +Either use 0 to disable or 1 to enable +@ TF_GENERIC is responsible for the Generic model traces. +@ TF_LIGHT is responsible for the Light model traces. +@ TF_SENSOR is responsible for the Sensor model traces. +@ TF_VENDOR is responsible for the vendor model traces. +@ TF_NEIGHBOUR is responsible for the neighbour function traces. +@ TF_PROVISION is responsible for the Provision related function traces. +@ TF_LPN_FRND is responsible for the Low power nodef function traces. +@ TF_ELEMENTS is responsible for the element selection function traces. +@ TF_ADDRESS is responsible for the address of element traces. +@ TF_HANDLER is responsible for the interrupt file traces. +@ TF_INIT is responsible for the main function traces. +@ TF_MISC is responsible for the other type traces. + +*/ +#define TF_GENERIC 1 +#define TF_LIGHT 1 +#define TF_LIGHT_LC 1 +#define TF_SENSOR 1 +#define TF_VENDOR 1 +#define TF_COMMON 1 +#define TF_VENDOR_COMMAND 1 +#define TF_NEIGHBOUR 0 +#define TF_LPN_FRND 1 +#define TF_ELEMENTS 0 +#define TF_ADDRESS 0 +#define TF_PROVISION 1 +#define TF_HANDLER 0 +#define TF_INIT 1 +#define TF_MISC 1 +#define TF_MEMORY 0 +#define TF_SERIAL_CTRL 1 +#define TF_BEACON 0 +#define TF_GENERIC_CLIENT 1 +#define TF_LIGHT_CLIENT 1 +#define TF_CONFIG_CLIENT 1 +#define TF_LIGHT_CLIENT 1 + +/******************************************************************************* +*** Following section helps to select right configuration of Models *********** +*******************************************************************************/ +/******* Define the following Macros to enable the usage of the Models ******/ + +/* Define the following Macros to enable the usage of the Server Generic Models */ +#define ENABLE_GENERIC_MODEL_SERVER_ONOFF +#define ENABLE_GENERIC_MODEL_SERVER_LEVEL +//#define ENABLE_GENERIC_MODEL_SERVER_POWER_ONOFF +//#define ENABLE_GENERIC_MODEL_SERVER_POWER_ONOFF_SETUP +//#define ENABLE_GENERIC_MODEL_SERVER_DEFAULT_TRANSITION_TIME + +/* The Following Models are not available in this version, will be developed in + next version. +*/ +/* +#define ENABLE_GENERIC_MODEL_SERVER_POWER_LEVEL +#define ENABLE_GENERIC_MODEL_SERVER_POWER_LEVEL_SETUP +#define ENABLE_GENERIC_MODEL_SERVER_BATTERY +#define ENABLE_GENERIC_MODEL_SERVER_LOCATION +#define ENABLE_GENERIC_MODEL_SERVER_LOCATION_SETUP +#define ENABLE_GENERIC_MODEL_SERVER_ADMIN_PROPERTY +#define ENABLE_GENERIC_MODEL_SERVER_MANUFACTURER_PROPERTY +#define ENABLE_GENERIC_MODEL_SERVER_USER_PROPERTY +#define ENABLE_GENERIC_MODEL_SERVER_CLIENT_PROPERTY + +*/ + +/******************************************************************************/ +/******* Define the following Macros to enable the usage of the Light Models */ +/******************************************************************************/ + +#define ENABLE_LIGHT_MODEL_SERVER_LIGHTNESS +#define ENABLE_LIGHT_MODEL_SERVER_LIGHTNESS_SETUP +//#define ENABLE_LIGHT_MODEL_SERVER_CTL +//#define ENABLE_LIGHT_MODEL_SERVER_CTL_SETUP +//#define ENABLE_LIGHT_MODEL_SERVER_CTL_TEMPERATURE +//#define ENABLE_LIGHT_MODEL_SERVER_HSL +//#define ENABLE_LIGHT_MODEL_SERVER_HSL_SETUP +//#define ENABLE_LIGHT_MODEL_SERVER_HSL_HUE +//#define ENABLE_LIGHT_MODEL_SERVER_HSL_SATURATION + +/* + The following Models are managed in different file light_lc.c in middleware +*/ +//#define ENABLE_LIGHT_MODEL_SERVER_LC +//#define ENABLE_LIGHT_MODEL_SERVER_LC_SETUP + +/******************************************************************************/ +/* Define the following Macros to enable the usage of the Sensor Models */ +/******************************************************************************/ + +#define ENABLE_SENSOR_MODEL_SERVER +#define ENABLE_SENSOR_MODEL_SERVER_SETUP + +/******************************************************************************/ +/* Define the following Macros to enable the usage of the time and scene Models */ +/******************************************************************************/ + +//#define ENABLE_TIME_MODEL_SERVER +//#define ENABLE_TIME_MODEL_SERVER_SETUP +//#define ENABLE_SCENE_MODEL_SERVER +//#define ENABLE_SCENE_MODEL_SERVER_SETUP + +/* + The Following Models are not available in this version +*/ +//#define ENABLE_LIGHT_MODEL_SERVER_XYL +//#define ENABLE_LIGHT_MODEL_SERVER_XYL_SETUP + +/******* Define the following Macros to enable the vendor model ******/ +#define ENABLE_VENDOR_MODEL_SERVER +#define GENERIC_SERVER_MODEL_PUBLISH + +/* Define the following Macros to enable the usage of the Client Generic Models */ +#define ENABLE_GENERIC_MODEL_CLIENT_ONOFF +#define ENABLE_GENERIC_MODEL_CLIENT_LEVEL +#define ENABLE_LIGHT_MODEL_CLIENT_LIGHTNESS +#define ENABLE_CONFIG_MODEL_CLIENT + +/******************************************************************************/ +/* +Define the Macro for enabling/disabling the Publishing with Generic on off +or by Vendor Model. +@ define Macro for Vendor Publishing +@ Undefine or comment Macro for Generic On Off Publishing +*/ +//#define VENDOR_CLIENT_MODEL_PUBLISH +#define GENERIC_CLIENT_MODEL_PUBLISH +#define LIGHT_CLIENT_MODEL_PUBLISH + +#if defined (ENABLE_GENERIC_MODEL_CLIENT_ONOFF) \ + || defined (ENABLE_GENERIC_MODEL_CLIENT_LEVEL) + + #define ENABLE_GENERIC_MODEL_CLIENT +#endif + +#if defined (ENABLE_LIGHT_MODEL_CLIENT_LIGHTNESS) + + #define ENABLE_LIGHT_MODEL_CLIENT +#endif + +/******************************************************************************/ +/* +Define the Macros for Enabling/disabling the binding of data between the Generic +and Light model. +@ define the Macro for enabling the binding +@ Undefine or comment the macro for disabling the binding. +*/ +/******************************************************************************/ +#define ENABLE_MODEL_BINDING + +/* Define the macros for the numbers of sensor present.*/ +#define NUMBER_OF_SENSOR 2 +//#define ENABLE_OCCUPANCY_SENSOR +/* +Macro is responsible for enabling and desabling the sensor publication. +Comment this macro to disable the publication +*/ +//#define ENABLE_SENSOR_PUBLICATION + +/******************************************************************************/ + + +/* Maximum Time period value of PWM */ +#define PWM_TIME_PERIOD 31990U + +/******************************************************************************/ +/***** MACROS for POWER ON-OFF CYCLE BASED UNPROVISIONING *********************/ +/******************************************************************************/ + +/* +Define the following Macro to check the Power-OnOff Cycles +5 Continous cycles of OnOff with Ontime <2 sec will cause unprovisioning +*/ +//#define ENABLE_UNPROVISIONING_BY_POWER_ONOFF_CYCLE + +#define POWER_ON_OFF_CYCLES_FOR_UNPROVISIONING 5 +#define MASK_BITS_FOR_POWER_ON_OFF_CYCLES (0xFFFFFFFF << POWER_ON_OFF_CYCLES_FOR_UNPROVISIONING) + /* 0xFFFFFFE0 */ +#define ON_TIME_IN_SECONDS_FOR_POWER_CYCLING 2 +#define BLINK_TIMES_FOR_FACTORY_RESET 5 + +/* +Define the following Macro to save Generic and Light Model states in NVM +This may result into excessive flash erase operations, this should be avoided to ensure flash longevity +*/ +#define ENABLE_SAVE_MODEL_STATE_NVM + +/* Only one Macro will be enable at one time */ +//#define SAVE_MODEL_STATE_FOR_ALL_MESSAGES +#define SAVE_MODEL_STATE_POWER_FAILURE_DETECTION + +/* +Define the following Macro to save the nodes data in provisioner in NVM +This may result into excessive flash erase operations, this should be avoided to ensure flash longevity +*/ +#define SAVE_EMBD_PROVISION_DATA 1 +/* Macros defined for the number of bytes saved, number of bytes dedicated for ganeric + model and light model. +*/ +#define APP_NVM_GENERIC_MODEL_SIZE 16U +#define APP_NVM_LIGHT_MODEL_SIZE 16U +#define APP_NVM_MODEL_SIZE 40U + +/*Macros are defined for the selection of the number of led and type of lighting + used for the application. +*if board has one led, uncomment USER_BOARD_1LED +*if board has cool warm leds, uncomment USER_BOARD_COOL_WHITE_LED +*if board has RGB leds, uncomment USER_BOARD_RGB_LED +*if board has RGB leds as well as cool warm leds, uncomment USER_BOARD_COOL_WHITE_LED + and USER_BOARD_RGB_LED +*/ +/* comment ENABLE_GENERIC_MODEL_SERVER_DEFAULT_TRANSITION_TIME when using + USER_BOARD_COOL_WHITE_LED ,USER_BOARD_RGB_LED + Default transition is provided only for one led. +*/ +#define USER_BOARD_1LED +//#define USER_BOARD_COOL_WHITE_LED +//#define USER_BOARD_RGB_LED + +/* Note: Please use Full Library configuration in project options to use the full + configuration of the C/C++ runtime library for printf and scanf functionality */ + +/* Enables the serial interface using Uart */ +#define ENABLE_SERIAL_INTERFACE 1 +#define ENABLE_UT 1 +#define ENABLE_SERIAL_CONTROL 1 +#define ENABLE_APPLI_TEST 0 +#define ENABLE_SERIAL_PRVN 1 + +/******************************************************************************* +*** Following section helps to configure the Application of Mesh *********** +*******************************************************************************/ + +#define APPLICATION_NUMBER_OF_ELEMENTS 3 +#define APPLICATION_SIG_MODELS_MAX_COUNT 20 +#define APPLICATION_VENDOR_MODELS_MAX_COUNT 2 + + +/* Contains a 16-bit company identifier assigned by the Bluetooth SIG +(the list is available @ https://www.bluetooth.com/specifications/assigned-numbers/company-identifiers ) +For STMicroelectronics : it is 0x0030 */ +#define COMPANY_ID 0x0030 + +/* Contains a 16-bit vendor-assigned product identifier */ +#define PRODUCT_ID 0x0002 + +/* Contains a 16-bit vendor-assigned product version ID */ +#define PRODUCT_VERSION_ID 0x010A + +#define MAX_APPLICATION_PACKET_SIZE 160 + +#define TPT_SEGMENT_COUNT (((MAX_APPLICATION_PACKET_SIZE)/12)+2) + +/******************************************************************************* +********** MAC Address Configuration ******************************************* +*******************************************************************************/ + +/* +* Define to enable external MAC handling, +* DONT change the Values 0x01, 0x02, 0x03 +* SELECT ONLY One of the Option +*/ +//#define GENERATE_STATIC_RANDOM_MAC 0x01 +//#define EXTERNAL_MAC_ADDR_MGMT 0x02 +#define INTERNAL_UNIQUE_NUMBER_MAC 0x03 + +/* Declare this value as 0x01 if the External Address is PUBLIC Address */ +/* For example like this: #define EXTERNAL_MAC_IS_PUBLIC_ADDR 0x1 */ +/* Else, by default, the external address will be treated as RANDOM */ +#define EXTERNAL_MAC_IS_PUBLIC_ADDR 0x0 + +/******************************************************************************/ + + +/******************************************************************************* +****** Following section helps to select right configuration of node *********** +*******************************************************************************/ +/* +* Minimum gap between successive transmissions +* varies from 10 to 65535 +*/ +#define TR_GAP_BETWEEN_TRANSMISSION 50U + + +/* +* Different provision bearer supported by BLE-Mesh. Define according to application. +* Atleast one of PB-ADV and PB-GATT should be defined +*/ +#define ENABLE_PB_ADV +#define ENABLE_PB_GATT +//#define ENABLE_PUB_KEY_TYPE_OOB +//#define ENABLE_AUTH_TYPE_STATIC_OOB +//#define ENABLE_AUTH_TYPE_OUTPUT_OOB +//#define ENABLE_AUTH_TYPE_INPUT_OOB + +/* Static OOB Configurations */ +#ifdef ENABLE_AUTH_TYPE_STATIC_OOB +#define STATIC_OOB_SIZE 16U +#else +#define STATIC_OOB_SIZE 0U +#endif +/* Output OOB Configurations */ +#ifdef ENABLE_AUTH_TYPE_OUTPUT_OOB +#define OUTPUT_OOB_SIZE 1U +#define OUTPUT_OOB_ACTION OUTPUT_OOB_ACTION_BIT_BLINK +#else +#define OUTPUT_OOB_SIZE 0U +#define OUTPUT_OOB_ACTION OUTPUT_OOB_ACTION_BIT_BLINK +#endif + +/* Input OOB Configurations */ +#ifdef ENABLE_AUTH_TYPE_INPUT_OOB +#define INPUT_OOB_SIZE 1U +#define INPUT_OOB_ACTION INPUT_OOB_ACTION_BIT_PUSH +#else +#define INPUT_OOB_SIZE 0U +#define INPUT_OOB_ACTION INPUT_OOB_ACTION_BIT_PUSH +#endif + +#if defined (ENABLE_PROVISIONER_FEATURE) || defined(DYNAMIC_PROVISIONER) + #define PROVISIONER_ROOT_ADDR_DEFAULT 0x0001 + #define PRVN_ELEMENTS_PER_NODE_MAX 0x0003 + + /* Enables the UUID saving per Node - Currenly Not Supported */ + #define ENABLE_SAVE_UUID_PER_NODE 0 + +/* Enables the Elements per Node info saving - Currenly Not Supported */ + /* #if (ELEMENTS_PER_NODE_MAX > 1) + #define ENABLE_SAVE_ELEMENTS_PER_NODE 1 + #endif + */ +#endif + + +/* +* Friend node receive window size is 50 ms +*/ + +/* +* Friend node subscription list size is 4 +*/ + +/* +* Friend node message queue is 16 +*/ + +/* +* Number of Low power nodes that can be associated with Friend node +* varies from 1 to 10 +*/ +#define FN_NO_OF_LPNS 6U + +/* +* For prioritizing friendship offer with good RSSI link +* varies from 0 to 3 +* Ref @Mesh_v1.0 +* 0 -> 1 +* 1 -> 1.5 +* 2 -> 2 +* 3 -> 2.5 +*/ +#define LPN_RSSI_FACTOR_LEVEL 1U + +/* +* For prioritizing friendship offer with good receive window factor +* varies from 0 to 3 +* Ref @Mesh_v1.0 +* 0 -> 1 +* 1 -> 1.5 +* 2 -> 2 +* 3 -> 2.5 +*/ +#define LPN_RECIVE_WINDOW_FACTOR_LEVEL 1U + +/* +* Minimum packets queue size required by Low Power node +* varies from 1 to 7 +* Ref @Mesh_v1.0 +* 1 -> 2 +* 2 -> 4 +* 3 -> 8 +* 4 -> 16 +* 5 -> 32 +* 6 -> 64 +* 7 -> 128 +*/ +#define LPN_MINIMUM_QUEUE_SIZE_LOG 2U + +/* +* (unit ms) +* varies from 0x0A to 0xFF +* Ref @Mesh_v1.0 +* 0x0A -> 10ms +* 0xFF -> 255ms +*/ +#define LPN_RECEIVE_DELAY 150U + +/* +* Poll timeout value after which friendship cease to exist (unit 100ms) +* varies from 0x00000A to 0x34BBFF +* Ref @Mesh_v1.0 +* 0x00000A -> 1 second +* 0x34BBFF -> 96 hours +*/ +#define LPN_POLL_TIMEOUT 2000U + +/* +* Maximum receive window size acceptable to low power node (unit ms) +* varies from 0x0A to 0xFF +* Ref @Mesh_v1.0 +* 0x0A -> 10ms +* 0xFF -> 255ms +*/ +#define LPN_RECEIVE_WINDOW_SIZE 255U/*55U*/ + +/* +* Minimum friend's subscription list size capability required by lpn +* varies from 1 to 5 +* Ref @Mesh_v1.0 +*/ +#define LPN_SUBSCR_LIST_SIZE 2U + +/* +* Frequency at which low power node would send friend request (unit 100ms) +* varies from 0 to 255 +* 100 -> 10s +*/ +#define LPN_FRIEND_REQUEST_FREQUENCY 50U + +/* +* Frequency at which low power node would poll friend node (unit 100ms) +* should be less than poll timeout +* 100 -> 10s +*/ +#define LPN_FRIEND_POLL_FREQUENCY 25U + +/* +* Minimum RSSI required by low power node +* should be less than equal to -60 +*/ +#define LPN_MINIMUM_RSSI -100 + +/* +* Retries to be made by lpn before termination of friendship +* varies from 2 to 10 +*/ +#define LPN_NO_OF_RETRIES 10U + +/* +* Maximum address list size buffer in Friend Subscription List Add Message is 10 +*/ + + +/* +* Enable or disable neighbor table +* if defined -> enabled +* If MAC address of neighbor changes it appears as new neighbor +* Neighbor table update can be triggered (configurable) in following cases +* On receiving Unprovisioned device beacon +* On receiving Secure network beacon +* On receiving Mesh message +* Message with any TTL +* Message with TTL = 0 +* if not defined -> disabled +*/ +#define ENABLE_NEIGHBOR_TABLE + +/* +* Size of neighbor table +*/ +#define NEIGHBOR_COUNT 5U + +/* +* (unit s) +* Duration (wrt appear or last refresh) for which neighbor exists in neighbor table +*/ +#define NEIGHBOR_ALIVE_TIME 20U + +/* +* Enable/disable neighbor table update with unprovisioned device beacon +* 0: Disable neighbor table update with unprovisioned device beacon +* 1: Enable neighbor table update with unprovisioned device beacon +*/ +#define NEIGHBOR_UNPRVND_DEV_BEACON_NTU 1U + +/* +* Enable/disable neighbor table update with secure network beacon +* 0: Disable neighbor table update with secure network beacon +* 1: Enable neighbor table update with secure network beacon +*/ +#define NEIGHBOR_SECURE_NET_BEACON_NTU 0U + +/* +* Enable/disable neighbor table update with TTL 0 message +* 0: Disable neighbor table update messages +* 1: Enable neighbor table update with messages with 0 TTL +* 2: Enable neighbor table update with messages with any TTL +*/ +#define NEIGHBOR_MSG_TTLX_NTU 0U + +/******************************************************************************* +*** Following section helps to configure the LEDs of Application of Mesh *********** +*******************************************************************************/ + +#if defined USE_STM32WBXX_NUCLEO || defined USE_STM32WBXX_USB_DONGLE + #define SINGLE_LED PWM4 + #define COOL_LED PWM0 + #define WARM_LED PWM1 + #define RED_LED PWM2 + #define GREEN_LED PWM3 + #define BLUE_LED PWM4 +#endif + +/* Following Macro helps to know if the Fixed functions are needed or not + DO NOT change or add any space at the end of the file */ +#if defined (ENABLE_GENERIC_MODEL_SERVER_ONOFF) \ + || defined (ENABLE_GENERIC_MODEL_SERVER_LEVEL) \ + || defined (ENABLE_GENERIC_MODEL_SERVER_POWER_ONOFF) \ + || defined (ENABLE_GENERIC_MODEL_SERVER_POWER_ONOFF_SETUP) \ + || defined (ENABLE_GENERIC_MODEL_SERVER_DEFAULT_TRANSITION_TIME) \ + || defined (ENABLE_GENERIC_MODEL_SERVER_POWER_LEVEL) \ + || defined (ENABLE_GENERIC_MODEL_SERVER_POWER_LEVEL_SETUP) \ + || defined (ENABLE_GENERIC_MODEL_SERVER_BATTERY) \ + || defined (ENABLE_GENERIC_MODEL_SERVER_LOCATION) \ + || defined (ENABLE_GENERIC_MODEL_SERVER_LOCATION_SETUP) \ + || defined (ENABLE_GENERIC_MODEL_SERVER_ADMIN_PROPERTY) \ + || defined (ENABLE_GENERIC_MODEL_SERVER_MANUFACTURER_PROPERTY) \ + || defined (ENABLE_GENERIC_MODEL_SERVER_USER_PROPERTY) \ + || defined (ENABLE_GENERIC_MODEL_SERVER_CLIENT_PROPERTY) + #define ENABLE_GENERIC_MODEL_SERVER + #define GENERIC_SERVER_MODEL_ADD_CONFIGURATION + +#endif + + +/* Following Macro helps to know if the Fixed functions are needed or not + DO NOT change or add any space at the end of the file */ +#if defined(ENABLE_LIGHT_MODEL_SERVER_LIGHTNESS) \ + || defined(ENABLE_LIGHT_MODEL_SERVER_LIGHTNESS_SETUP) \ + || defined(ENABLE_LIGHT_MODEL_SERVER_CTL) \ + || defined(ENABLE_LIGHT_MODEL_SERVER_CTL_SETUP) \ + || defined(ENABLE_LIGHT_MODEL_SERVER_CTL_TEMPERATURE) \ + || defined(ENABLE_LIGHT_MODEL_SERVER_HSL) \ + || defined(ENABLE_LIGHT_MODEL_SERVER_HSL_SETUP) \ + || defined(ENABLE_LIGHT_MODEL_SERVER_HSL_HUE) \ + || defined(ENABLE_LIGHT_MODEL_SERVER_HSL_SATURATION) \ + || defined(ENABLE_LIGHT_MODEL_SERVER_LC) \ + || defined(ENABLE_LIGHT_MODEL_SERVER_LC_SETUP) \ + || defined(ENABLE_LIGHT_MODEL_SERVER_XYL) \ + || defined(ENABLE_LIGHT_MODEL_SERVER_XYL_SETUP) + #define ENABLE_LIGHT_MODEL_SERVER + #define LIGHT_SERVER_MODEL_ADD_CONFIGURATION +#endif + +#if defined(ENABLE_TIME_MODEL_SERVER) \ + || defined(ENABLE_TIME_MODEL_SERVER_SETUP)\ + || defined(ENABLE_SCENE_MODEL_SERVER)\ + || defined(ENABLE_SCENE_MODEL_SERVER_SETUP) + #define ENABLE_TIME_SCENE_MODEL_SERVER +#endif + + +/* Exported variables -------------------------------------------------------*/ +/* Exported Functions Prototypes ---------------------------------------------*/ + +#endif /* __MESH_CFG_USR_H */ |