diff options
Diffstat (limited to 'Projects/P-NUCLEO-WB55.Nucleo/Applications/BLE/BLE_RfWithFlash/Core/Src/app_entry.c')
-rw-r--r-- | Projects/P-NUCLEO-WB55.Nucleo/Applications/BLE/BLE_RfWithFlash/Core/Src/app_entry.c | 309 |
1 files changed, 309 insertions, 0 deletions
diff --git a/Projects/P-NUCLEO-WB55.Nucleo/Applications/BLE/BLE_RfWithFlash/Core/Src/app_entry.c b/Projects/P-NUCLEO-WB55.Nucleo/Applications/BLE/BLE_RfWithFlash/Core/Src/app_entry.c new file mode 100644 index 000000000..a70641314 --- /dev/null +++ b/Projects/P-NUCLEO-WB55.Nucleo/Applications/BLE/BLE_RfWithFlash/Core/Src/app_entry.c @@ -0,0 +1,309 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file app_entry.c + * @author MCD Application Team + * @brief Entry point of the Application + ****************************************************************************** + * @attention + * + * <h2><center>© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "app_common.h" +#include "main.h" +#include "app_entry.h" +#include "app_ble.h" +#include "ble.h" +#include "tl.h" +#include "stm32_seq.h" +#include "shci_tl.h" +#include "stm32_lpm.h" +#include "app_debug.h" + +/* Private includes -----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +extern RTC_HandleTypeDef hrtc; +/* USER CODE BEGIN PTD */ + +/* USER CODE END PTD */ + +/* Private defines -----------------------------------------------------------*/ +#define POOL_SIZE (CFG_TLBLE_EVT_QUEUE_LENGTH*4U*DIVC(( sizeof(TL_PacketHeader_t) + TL_BLE_EVENT_FRAME_SIZE ), 4U)) + +/* USER CODE BEGIN PD */ + +/* USER CODE END PD */ + +/* Private macros ------------------------------------------------------------*/ +/* USER CODE BEGIN PM */ + +/* USER CODE END PM */ + +/* Private variables ---------------------------------------------------------*/ +PLACE_IN_SECTION("MB_MEM2") ALIGN(4) static uint8_t EvtPool[POOL_SIZE]; +PLACE_IN_SECTION("MB_MEM2") ALIGN(4) static TL_CmdPacket_t SystemCmdBuffer; +PLACE_IN_SECTION("MB_MEM2") ALIGN(4) static uint8_t SystemSpareEvtBuffer[sizeof(TL_PacketHeader_t) + TL_EVT_HDR_SIZE + 255U]; +PLACE_IN_SECTION("MB_MEM2") ALIGN(4) static uint8_t BleSpareEvtBuffer[sizeof(TL_PacketHeader_t) + TL_EVT_HDR_SIZE + 255]; + +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private functions prototypes-----------------------------------------------*/ +static void SystemPower_Config( void ); +static void appe_Tl_Init( void ); +static void APPE_SysStatusNot( SHCI_TL_CmdStatus_t status ); +static void APPE_SysUserEvtRx( void * pPayload ); + +#if (CFG_HW_LPUART1_ENABLED == 1) +extern void MX_LPUART1_UART_Init(void); +#endif +#if (CFG_HW_USART1_ENABLED == 1) +extern void MX_USART1_UART_Init(void); +#endif + +/* USER CODE BEGIN PFP */ +static void Led_Init( void ); +static void Button_Init( void ); +/* USER CODE END PFP */ + +/* Functions Definition ------------------------------------------------------*/ +void APPE_Init( void ) +{ + SystemPower_Config(); /**< Configure the system Power Mode */ + + HW_TS_Init(hw_ts_InitMode_Full, &hrtc); /**< Initialize the TimerServer */ + +/* USER CODE BEGIN APPE_Init_1 */ + APPD_Init(); + + /** + * The Standby mode should not be entered before the initialization is over + * The default state of the Low Power Manager is to allow the Standby Mode so an request is needed here + */ + UTIL_LPM_SetOffMode(1 << CFG_LPM_APP, UTIL_LPM_DISABLE); + + Led_Init(); + + Button_Init(); +/* USER CODE END APPE_Init_1 */ + appe_Tl_Init(); /* Initialize all transport layers */ + + /** + * From now, the application is waiting for the ready event ( VS_HCI_C2_Ready ) + * received on the system channel before starting the Stack + * This system event is received with APPE_SysUserEvtRx() + */ +/* USER CODE BEGIN APPE_Init_2 */ + +/* USER CODE END APPE_Init_2 */ + return; +} +/* USER CODE BEGIN FD */ + +/* USER CODE END FD */ + +/************************************************************* + * + * LOCAL FUNCTIONS + * + *************************************************************/ + +/** + * @brief Configure the system for power optimization + * + * @note This API configures the system to be ready for low power mode + * + * @param None + * @retval None + */ +static void SystemPower_Config( void ) +{ + + /** + * Select HSI as system clock source after Wake Up from Stop mode + */ + LL_RCC_SetClkAfterWakeFromStop(LL_RCC_STOP_WAKEUPCLOCK_HSI); + + /* Initialize low power manager */ + UTIL_LPM_Init( ); + +#if (CFG_USB_INTERFACE_ENABLE != 0) + /** + * Enable USB power + */ + HAL_PWREx_EnableVddUSB(); +#endif + + return; +} + +static void appe_Tl_Init( void ) +{ + TL_MM_Config_t tl_mm_config; + SHCI_TL_HciInitConf_t SHci_Tl_Init_Conf; + /**< Reference table initialization */ + TL_Init(); + + /**< System channel initialization */ + UTIL_SEQ_RegTask( 1<< CFG_TASK_SYSTEM_HCI_ASYNCH_EVT_ID, UTIL_SEQ_RFU, shci_user_evt_proc ); + SHci_Tl_Init_Conf.p_cmdbuffer = (uint8_t*)&SystemCmdBuffer; + SHci_Tl_Init_Conf.StatusNotCallBack = APPE_SysStatusNot; + shci_init(APPE_SysUserEvtRx, (void*) &SHci_Tl_Init_Conf); + + /**< Memory Manager channel initialization */ + tl_mm_config.p_BleSpareEvtBuffer = BleSpareEvtBuffer; + tl_mm_config.p_SystemSpareEvtBuffer = SystemSpareEvtBuffer; + tl_mm_config.p_AsynchEvtPool = EvtPool; + tl_mm_config.AsynchEvtPoolSize = POOL_SIZE; + TL_MM_Init( &tl_mm_config ); + + TL_Enable(); + + return; +} + +static void APPE_SysStatusNot( SHCI_TL_CmdStatus_t status ) +{ + UNUSED(status); + return; +} + +/** + * The type of the payload for a system user event is tSHCI_UserEvtRxParam + * When the system event is both : + * - a ready event (subevtcode = SHCI_SUB_EVT_CODE_READY) + * - reported by the FUS (sysevt_ready_rsp == RSS_FW_RUNNING) + * The buffer shall not be released + * ( eg ((tSHCI_UserEvtRxParam*)pPayload)->status shall be set to SHCI_TL_UserEventFlow_Disable ) + * When the status is not filled, the buffer is released by default + */ +static void APPE_SysUserEvtRx( void * pPayload ) +{ + UNUSED(pPayload); + /* Traces channel initialization */ + APPD_EnableCPU2( ); + + APP_BLE_Init( ); + UTIL_LPM_SetOffMode(1U << CFG_LPM_APP, UTIL_LPM_ENABLE); + return; +} + +/* USER CODE BEGIN FD_LOCAL_FUNCTIONS */ +static void Led_Init( void ) +{ +#if (CFG_LED_SUPPORTED == 1) + /** + * Leds Initialization + */ + + BSP_LED_Init(LED_BLUE); + BSP_LED_Init(LED_GREEN); + BSP_LED_Init(LED_RED); + + BSP_LED_On(LED_GREEN); +#endif + + return; +} + +static void Button_Init( void ) +{ +#if (CFG_BUTTON_SUPPORTED == 1) + /** + * Button Initialization + */ + + BSP_PB_Init(BUTTON_SW1, BUTTON_MODE_EXTI); + BSP_PB_Init(BUTTON_SW2, BUTTON_MODE_EXTI); + BSP_PB_Init(BUTTON_SW3, BUTTON_MODE_EXTI); +#endif + + return; +} +/* USER CODE END FD_LOCAL_FUNCTIONS */ + +/************************************************************* + * + * WRAP FUNCTIONS + * + *************************************************************/ + +void UTIL_SEQ_Idle( void ) +{ +#if ( CFG_LPM_SUPPORTED == 1) + UTIL_LPM_EnterLowPower( ); +#endif + return; +} + +/** + * @brief This function is called by the scheduler each time an event + * is pending. + * + * @param evt_waited_bm : Event pending. + * @retval None + */ +void UTIL_SEQ_EvtIdle( UTIL_SEQ_bm_t task_id_bm, UTIL_SEQ_bm_t evt_waited_bm ) +{ + UTIL_SEQ_Run( UTIL_SEQ_DEFAULT ); +} + +void shci_notify_asynch_evt(void* pdata) +{ + UTIL_SEQ_SetTask( 1<<CFG_TASK_SYSTEM_HCI_ASYNCH_EVT_ID, CFG_SCH_PRIO_0); + return; +} + +void shci_cmd_resp_release(uint32_t flag) +{ + UTIL_SEQ_SetEvt( 1<< CFG_IDLEEVT_SYSTEM_HCI_CMD_EVT_RSP_ID ); + return; +} + +void shci_cmd_resp_wait(uint32_t timeout) +{ + UTIL_SEQ_WaitEvt( 1<< CFG_IDLEEVT_SYSTEM_HCI_CMD_EVT_RSP_ID ); + return; +} + +/* USER CODE BEGIN FD_WRAP_FUNCTIONS */ +void HAL_GPIO_EXTI_Callback( uint16_t GPIO_Pin ) +{ + switch (GPIO_Pin) + { + case BUTTON_SW1_PIN: + APP_BLE_Key_Button1_Action(); + break; + + case BUTTON_SW2_PIN: + APP_BLE_Key_Button2_Action(); + break; + + case BUTTON_SW3_PIN: + APP_BLE_Key_Button3_Action(); + break; + + default: + break; + + } + return; +} +/* USER CODE END FD_WRAP_FUNCTIONS */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |