1 files changed, 0 insertions, 310 deletions
diff --git a/Projects/P-NUCLEO-WB55.Nucleo/Applications/BLE_LLD/BLE_LLD_Pressbutton/STM32_WPAN/App/ble_lld_private.h b/Projects/P-NUCLEO-WB55.Nucleo/Applications/BLE_LLD/BLE_LLD_Pressbutton/STM32_WPAN/App/ble_lld_private.h
deleted file mode 100644
index e2173dd70..000000000
--- a/Projects/P-NUCLEO-WB55.Nucleo/Applications/BLE_LLD/BLE_LLD_Pressbutton/STM32_WPAN/App/ble_lld_private.h
+++ /dev/null
@@ -1,310 +0,0 @@
-/**
- ******************************************************************************
-  * File Name          : app_ble_lld_private.h
-  * Description        : Header for BLE LLD communication with M0.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
- */
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef BLE_LLD_PRIVATE_H
-#define BLE_LLD_PRIVATE_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-
-/* Private includes ----------------------------------------------------------*/
-
-/* Exported types ------------------------------------------------------------*/
-
-/* Exported constants --------------------------------------------------------*/
-
-/* External variables --------------------------------------------------------*/
-
-/* Exported macros ------------------------------------------------------------*/
-
-/* Exported functions ------------------------------------------------------- */
-
-/* ---------------------------------------------------------------------------*/
-/* ------------------------------- BLE LLD -----------------------------------*/
-/* ---------------------------------------------------------------------------*/
-
-/* max payload length(255) + header (2) (257 bytes) aligned on 32-bit (65 word = 260 bytes) */
-#define RADIO_PKT_RX_BUF_SIZE       260 
-#define RADIO_PKT_TX_BUF_SIZE       260 
-
-/* Commands to M0 */
-typedef enum
-{
-  HAL_BLE_LLD_UNUSED_CMDCODE = 0,
-  HAL_BLE_LLD_INIT_CMDCODE ,
-  HAL_BLE_LLD_SETNETWORKID_CMDCODE,
-  HAL_BLE_LLD_SENDPACKET_CMDCODE,
-  HAL_BLE_LLD_SENDPACKETWITHACK_CMDCODE,
-  HAL_BLE_LLD_RECEIVEPACKET_CMDCODE,
-  HAL_BLE_LLD_RECEIVEPACKETWITHACK_CMDCODE,
-  BLE_LLD_GETSTATUS_CMDCODE,
-  BLE_LLD_SETCHANNELMAP_CMDCODE,
-  BLE_LLD_SETCHANNEL_CMDCODE,
-  BLE_LLD_SETTXATTRIBUTES_CMDCODE,
-  BLE_LLD_SETBACKTOBACKTIME_CMDCODE,
-  BLE_LLD_SETTXPOWER_CMDCODE,
-  BLE_LLD_SETTX_RX_PHY_CMDCODE,
-  BLE_LLD_STOPACTIVITY_CMDCODE,
-  BLE_LLD_SETENCRYPTIONCOUNT_CMDCODE,
-  BLE_LLD_SETENCRYPTIONATTRIBUTES_CMDCODE,
-  BLE_LLD_SETENCRYPTFLAGS_CMDCODE,
-  BLE_LLD_ENCRYPTPLAINDATA_CMDCODE,
-  BLE_LLD_STARTTONE_CMDCODE,
-  BLE_LLD_STOPTONE_CMDCODE,
-  BLE_LLD_SETRESERVEDAREA_CMDCODE,
-  BLE_LLD_MAKEACTIONPACKETPENDING_CMDCODE,
-  BLE_LLD_INIT_CMDCODE,
-} BLE_LLD_Code_t;
-
-/* dataRoutine and condRoutine struct */
-typedef PACKED_STRUCT
-{
-  uint8_t condCase;
-  uint8_t dataCase;
-} setCase_t;
-
-/* Structure for Buffer */
-typedef PACKED_STRUCT
-{
-  uint8_t txBuffer[RADIO_PKT_TX_BUF_SIZE]; /* __I */ /*txBuffer + Encrypt*/
-  uint8_t rxBuffer[RADIO_PKT_RX_BUF_SIZE]; /* __O */ /*rxBuffer + radioPacketNb=rxBuffer[257] */
-} buffer_BLE_LLD_t;
-
-/* Generic structure for messages to M0, mostly used as a size reference.
-   Only returnValue is used.
-   A specialized structure (param_hal_BLE_xxx_t or param_BLE_LLD_xxx_t) should
-   be used for actual messages. */
-typedef PACKED_STRUCT
-{
-  uint8_t padding1[24];
-  uint8_t returnValue;
-  uint8_t padding2[5];
-  setCase_t padding3;
-  buffer_BLE_LLD_t padding4;
-} param_BLE_LLD_t;
-
-/** Parameters for command HAL_BLE_SETNETWORKID_CMDCODE */
-typedef PACKED_STRUCT
-{
-  uint32_t padding1[2];
-  uint32_t id;
-} param_BLE_LLD_network_t;
-
-/** Parameters for commands HAL_BLE_SENDPACKET_CMDCODE and
- *  HAL_BLE_LLD_SENDPACKETWITHACK_CMDCODE */
-typedef PACKED_STRUCT
-{
-  uint32_t wakeupTime;
-  uint32_t receiveTimeout;
-  uint32_t packetNumber;
-  uint8_t padding1[13];
-  uint8_t channel;
-  uint8_t padding2;
-  uint8_t packetStopRx;
-  uint8_t padding3[2];
-  setCase_t setCase;
-  buffer_BLE_LLD_t txrxBuffer;
-} param_BLE_LLD_send_t;
-
-/** Parameters for commands HAL_BLE_RECEIVEPACKET_CMDCODE and
- * HAL_BLE_LLD_RECEIVEPACKETWITHACK_CMDCODE */
-typedef PACKED_STRUCT
-{
-  uint32_t wakeupTime;
-  uint32_t receiveTimeout;
-  uint32_t packetNumber;
-  uint8_t padding1[14];
-  uint8_t channel;
-  uint8_t packetStopRx;
-  uint8_t padding2[2];
-  setCase_t setCase;
-  buffer_BLE_LLD_t txrxBuffer;
-} param_BLE_LLD_receive_t;
-
-/** Parameters for command BLE_LLD_GETSTATUS_CMDCODE */
-typedef PACKED_STRUCT
-{
-  uint32_t padding1[2];
-  uint32_t time;
-} param_BLE_LLD_status_t;
-
-/** Parameters for command BLE_LLD_SETENCRYPTIONCOUNT_CMDCODE */
-typedef PACKED_STRUCT
-{
-  uint8_t padding1[27];
-  uint8_t stateMachineNo;
-  uint8_t padding2[2];
-  setCase_t padding3;
-  uint8_t countTx[5];
-  uint8_t countRcv[5];
-} param_BLE_LLD_cryptCount_t;
-
-/** Parameters for command BLE_LLD_SETENCRYPTIONATTRIBUTES_CMDCODE */
-typedef PACKED_STRUCT
-{
-  uint8_t padding1[27];
-  uint8_t stateMachineNo;
-  uint8_t padding2[2];
-  setCase_t padding3;
-  uint8_t encIv[AES_IV_SIZE];
-  uint8_t encKey[AES_KEY_SIZE];
-} param_BLE_LLD_cryptAttr_t;
-
-/** Parameters for command BLE_LLD_SETENCRYPTFLAGS_CMDCODE */
-typedef PACKED_STRUCT
-{
-  uint8_t padding1[25];
-  uint8_t encFlagTx;
-  uint8_t encFlagRx;
-  uint8_t StateMachineNo;
-} param_BLE_LLD_cryptFlags_t;
-
-/** Parameters for command BLE_LLD_ENCRYPTPLAINDATA_CMDCODE */
-typedef PACKED_STRUCT
-{
-  uint8_t padding1[30];
-  setCase_t padding2;
-  uint8_t key[AES_KEY_SIZE];
-  uint8_t padding3[112];
-  uint8_t plainData[AES_BLOCK_SIZE];
-  uint8_t padding[116];
-  uint8_t cypherData[AES_BLOCK_SIZE];
-} param_BLE_LLD_crypt_t;
-
-/** Parameters for command BLE_LLD_STARTTONE_CMDCODE */
-typedef PACKED_STRUCT
-{
-  uint8_t padding1[25];
-  uint8_t channel;
-  uint8_t padding2;
-  uint8_t power;
-} param_BLE_LLD_toneStart_t;
-
-/** Parameters for command BLE_LLD_SETCHANNELMAP_CMDCODE */
-typedef PACKED_STRUCT
-{
-  uint8_t padding1[27];
-  uint8_t stateMachineNo;
-  uint8_t padding2[2];
-  setCase_t padding3;
-  uint8_t map[CHAN_MAP_SIZE];
-} param_BLE_LLD_chanMap_t;
-
-/** Parameters for command BLE_LLD_SETCHANNEL_CMDCODE */
-typedef PACKED_STRUCT
-{
-  uint8_t padding1[25];
-  uint8_t channel;
-  uint8_t channelInc;
-  uint8_t stateMachineNo;
-} param_BLE_LLD_chan_t;
-
-/** Parameters for command BLE_LLD_SETTXATTRIBUTES_CMDCODE */
-typedef PACKED_STRUCT
-{
-  uint32_t crcInit;
-  uint32_t sca;
-  uint32_t networkId;
-  uint8_t padding1[15];
-  uint8_t stateMachineNo;
-} param_BLE_LLD_txAttr_t;
-
-/** Parameters for command BLE_LLD_SETBACKTOBACKTIME_CMDCODE */
-typedef PACKED_STRUCT
-{
-  uint32_t backToBackTime;
-} param_BLE_LLD_b2b_t;
-
-/** Parameters for command BLE_LLD_SETTXPOWER_CMDCODE */
-typedef PACKED_STRUCT
-{
-  uint8_t padding1[27];
-  uint8_t power;
-} param_BLE_LLD_power_t;
-
-/** Parameters for command BLE_LLD_SETTX_RX_PHY_CMDCODE */
-typedef PACKED_STRUCT
-{
-  uint8_t padding1[25];
-  uint8_t txPhy;
-  uint8_t rxPhy;
-  uint8_t stateMachineNo;
-} param_BLE_LLD_phy_t;
-
-/** Parameters for command BLE_LLD_SETRESERVEDAREA_CMDCODE */
-typedef PACKED_STRUCT
-{
-  uint32_t wakeupTime;
-  uint32_t receiveWindowLength;
-  uint8_t padding1[17];
-  uint8_t nextTrue;
-  uint8_t nextFalse;
-  uint8_t stateMachineNo;
-  uint8_t actionTag;
-  uint8_t actionPacketNb;
-  setCase_t setCase;
-  buffer_BLE_LLD_t txrxBuffer;
-} param_BLE_LLD_reserved_t;
-
-/** Parameters for command BLE_LLD_MAKEACTIONPACKETPENDING_CMDCODE */
-typedef PACKED_STRUCT
-{
-  uint32_t padding1[2];
-  uint32_t packetNumber;
-  uint8_t padding2[15];
-  uint8_t packetStopRx;
-  uint8_t padding3;
-  uint8_t actionPacketNb;
-} param_BLE_LLD_mkPending_t;
-
-/** Parameters for command BLE_LLD_INIT_CMDCODE */
-typedef PACKED_STRUCT
-{
-  uint32_t startupTime;
-  uint8_t padding1[24];
-  uint8_t lowSpeedOsc;
-  uint8_t whitening;
-  setCase_t padding2;
-  buffer_BLE_LLD_t txrxBuffer;
-} param_BLE_LLD_init_t;
-
-/** Parameters for replies */
-typedef PACKED_STRUCT
-{
-  uint8_t padding1[12];
-  uint32_t status;
-  uint32_t timestampReceive;
-  uint32_t rssi;
-  uint8_t padding2[6];
-  setCase_t padding3;
-  buffer_BLE_LLD_t txrxBuffer;
-} param_BLE_LLD_m0Reply_t;
-
-/** Command to M0 */
-typedef PACKED_STRUCT
-{
-  uint8_t id;
-  param_BLE_LLD_t *params;
-} bleCmd_t;
-
-#endif /* BLE_LLD_PRIVATE_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/