diff options
Diffstat (limited to 'Projects/P-NUCLEO-WB55.Nucleo/Applications/Zigbee/Zigbee_MeterId_Client_Router/readme.txt')
-rw-r--r-- | Projects/P-NUCLEO-WB55.Nucleo/Applications/Zigbee/Zigbee_MeterId_Client_Router/readme.txt | 144 |
1 files changed, 144 insertions, 0 deletions
diff --git a/Projects/P-NUCLEO-WB55.Nucleo/Applications/Zigbee/Zigbee_MeterId_Client_Router/readme.txt b/Projects/P-NUCLEO-WB55.Nucleo/Applications/Zigbee/Zigbee_MeterId_Client_Router/readme.txt new file mode 100644 index 000000000..be44243d8 --- /dev/null +++ b/Projects/P-NUCLEO-WB55.Nucleo/Applications/Zigbee/Zigbee_MeterId_Client_Router/readme.txt @@ -0,0 +1,144 @@ +/** + @page Zigbee_MeterId_Client_Router application + + @verbatim + ****************************************************************************** + * @file Zigbee/Zigbee_MeterId_Client_Router/readme.txt + * @author MCD Application Team + * @brief Description of the Zigbee Meter Identification Cluster application as a client + * using a centralized network. + ****************************************************************************** + * + * Copyright (c) 2019 STMicroelectronics. All rights reserved. + * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + @endverbatim + +@par Application Description + +How to use Meter Identification cluster as a client on a centralized Zigbee network. + +The purpose of this application is to show how to create a Zigbee centralized network, and +how to communicate from one node to another one using the Meter Identification cluster. Once the Zigbee mesh +network is created, the user can send requests from the client to the server through push buttons SW1 and SW2. + +For this application it is requested to have: + +- 1 STM32WB55xx (Nucleo or USB dongle) board loaded with: + - wireless coprocessor : stm32wb5x_Zigbee_FFD_fw.bin + - application : Zigbee_MeterId_Server_Coord + +- 1 or more STM32WB55xx board loaded with: + - wireless coprocessor : stm32wb5x_Zigbee_FFD_fw.bin + - application : Zigbee_MeterId_Client_Router + + +Demo use case : + +This demo shows how to use Meter Identification cluster. +The Meter Identification Server set up its read-only attributes (read-only attributes local write allowed). +The Meter Identification Client can remotely read them by requesting a remote read. + +Two read-only attributes are used : +- the Company Name (ZCL string) +- the Meter Type ID (16-bit integer) + + + Device 1 Device 2 + + +--------+ +--------+ + | | | | + | Client | -->| Server | + | | ZbZclAttrStringWriteShort(ZCL_METER_ID_ATTR_COMPANY_NAME) | | | + | | ---| | + | | | | + | | -->| | + | | ZbZclAttrStringWriteShort(ZCL_METER_ID_ATTR_METER_TYPE_ID) | | | + | | ---| | + | | | | + | | ZbZclReadReq(ZCL_METER_ID_ATTR_COMPANY_NAME) | | + PushB SW1=>| | -------------------------------------------------------------------> | | + | | <------------------------------------------------------------------- | | + | | | | + | | ZbZclReadReq(ZCL_METER_ID_ATTR_METER_TYPE_ID) | | + PushB SW2=>| | -------------------------------------------------------------------> | | + | | <------------------------------------------------------------------- | | + | | | | + +--------+ +--------+ + +To setup the application : + + a) Open the project, build it and load your generated application on your STM32WB devices. + + To run the application : + + a) Start the first board. It must be the coordinator of the Zigbee network so in this demo application it is + the device running Zigbee_MeterId_Server_Coord application (Device2 in the above diagram). + Wait for the Blue LED (LED1) ON. + Start the second board. This board is configured as Zigbee router and will be attached to the network created + by the coordinator. Do the same for the other boards if applicable. + + b) At this stage, the Zigbee network is automatically created and BLUE LED (LED1) is ON on all devices. + it is now possible to remotely read Meter Identification server attributes on the client by pressing on + the SW1/SW2 push button. + + Note: when LED1, LED2 and LED3 are toggling it is indicating an error has occurred on application. + +@par Hardware and Software environment + + - This example runs on STM32WB55xx devices. + + - For the Zigbee_MeterId_Server_Coord application, a STM32WB55xx USB dongle can be used. + + - This example has been tested with an STMicroelectronics STM32WB55RG_Nucleo + board and can be easily tailored to any other supported device + and development board. + + - On STM32WB55RG_Nucleo, the jumpers must be configured as described + in this section. Starting from the top left position up to the bottom + right position, the jumpers on the Board must be set as follows: + + CN11: GND [OFF] + JP4: VDDRF [ON] + JP6: VC0 [ON] + JP2: +3V3 [ON] + JP1: USB_STL [ON] All others [OFF] + CN12: GND [OFF] + CN7: <All> [OFF] + JP3: VDD_MCU [ON] + JP5: GND [OFF] All others [ON] + CN10: <All> [OFF] + + +@par How to use it ? + +=> Loading of the stm32wb5x_Zigbee_FFD_fw.bin binary + + This application requests having the stm32wb5x_Zigbee_FFD_fw.bin binary flashed on the Wireless Coprocessor. + If it is not the case, you need to use STM32CubeProgrammer to load the appropriate binary. + All available binaries are located under /Projects/STM32_Copro_Wireless_Binaries directory. + Refer to UM2237 to learn how to use/install STM32CubeProgrammer. + Refer to /Projects/STM32_Copro_Wireless_Binaries/ReleaseNote.html for the detailed procedure to change the + Wireless Coprocessor binary. + +=> Getting traces + To get the traces you need to connect your Board to the Hyperterminal (through the STLink Virtual COM Port). + The UART must be configured as follows: + + - BaudRate = 115200 baud + - Word Length = 8 Bits + - Stop Bit = 1 bit + - Parity = none + - Flow control = none + +=> Running the application + + Refer to the Application description at the beginning of this readme.txt + + * <h3><center>© COPYRIGHT STMicroelectronics</center></h3> + |