diff options
Diffstat (limited to 'Projects/P-NUCLEO-WB55.Nucleo/Applications/Zigbee/Zigbee_OnOff_Router/STM32_WPAN/App/app_zigbee.c')
-rw-r--r-- | Projects/P-NUCLEO-WB55.Nucleo/Applications/Zigbee/Zigbee_OnOff_Router/STM32_WPAN/App/app_zigbee.c | 317 |
1 files changed, 317 insertions, 0 deletions
diff --git a/Projects/P-NUCLEO-WB55.Nucleo/Applications/Zigbee/Zigbee_OnOff_Router/STM32_WPAN/App/app_zigbee.c b/Projects/P-NUCLEO-WB55.Nucleo/Applications/Zigbee/Zigbee_OnOff_Router/STM32_WPAN/App/app_zigbee.c new file mode 100644 index 000000000..a7ca65f04 --- /dev/null +++ b/Projects/P-NUCLEO-WB55.Nucleo/Applications/Zigbee/Zigbee_OnOff_Router/STM32_WPAN/App/app_zigbee.c @@ -0,0 +1,317 @@ +/** + ****************************************************************************** + * File Name : App/app_zigbee.c + * Description : Zigbee Application. + ****************************************************************************** + * @attention + * + * <h2><center>© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "app_common.h" +#include "app_entry.h" +#include "dbg_trace.h" +#include "app_zigbee.h" +#include "zigbee_interface.h" +#include "shci.h" +#include "stm_logging.h" +#include "app_conf.h" +#include "stm32wbxx_core_interface_def.h" +#include "zigbee_types.h" +#include "stm32_seq.h" + +/* Private defines -----------------------------------------------------------*/ + +/* Private function prototypes -----------------------------------------------*/ +void APP_ZIGBEE_Demo(void); + +static void APP_ZIGBEE_TraceError(const char *pMess, uint32_t ErrCode); +static void APP_ZIGBEE_CheckWirelessFirmwareInfo(void); + +static void Wait_Getting_Ack_From_M0(void); +static void Receive_Ack_From_M0(void); +static void Receive_Notification_From_M0(void); + +/* Private variables -----------------------------------------------*/ +static TL_CmdPacket_t *p_ZIGBEE_otcmdbuffer; +static TL_EvtPacket_t *p_ZIGBEE_notif_M0_to_M4; +static __IO uint32_t CptReceiveMsgFromM0 = 0; + +PLACE_IN_SECTION("MB_MEM1") ALIGN(4) static TL_ZIGBEE_Config_t ZigbeeConfigBuffer; +PLACE_IN_SECTION("MB_MEM2") ALIGN(4) static TL_CmdPacket_t ZigbeeOtCmdBuffer; +PLACE_IN_SECTION("MB_MEM2") ALIGN(4) static uint8_t ZigbeeNotifRspEvtBuffer[sizeof(TL_PacketHeader_t) + TL_EVT_HDR_SIZE + 255U]; +PLACE_IN_SECTION("MB_MEM2") ALIGN(4) static uint8_t ZigbeeNotifLoggingBuffer[sizeof(TL_PacketHeader_t) + TL_EVT_HDR_SIZE + 255U]; + +/* Functions Definition ------------------------------------------------------*/ + +void APP_ZIGBEE_Init(void) +{ + SHCI_CmdStatus_t ZigbeeInitStatus; + + APP_DBG("APP_ZIGBEE_Init"); + + /* Check the compatibility with the Coprocessor Wireless Firmware loaded */ + APP_ZIGBEE_CheckWirelessFirmwareInfo(); + + /* Register cmdbuffer */ + APP_ZIGBEE_RegisterCmdBuffer(&ZigbeeOtCmdBuffer); + + /* Init config buffer and call TL_ZIGBEE_Init */ + APP_ZIGBEE_TL_INIT(); + + ZigbeeInitStatus = SHCI_C2_ZIGBEE_Init(); + /* Prevent unused argument(s) compilation warning */ + UNUSED(ZigbeeInitStatus); + + /* Register task */ + /* Create the different tasks */ + UTIL_SEQ_RegTask(1U << (uint32_t)CFG_TASK_MSG_FROM_M0_TO_M4, UTIL_SEQ_RFU,APP_ZIGBEE_ProcessMsgM0ToM4); + + /* Create the zigbee demo task */ + UTIL_SEQ_RegTask(1U << CFG_TASK_ZIGBEE_APP, UTIL_SEQ_RFU,APP_ZIGBEE_Demo); + /* run the task */ + UTIL_SEQ_SetTask(1U << CFG_TASK_ZIGBEE_APP, CFG_SCH_PRIO_0); +} /* APP_ZIGBEE_Init */ + +/** + * @brief Trace the error or the warning reported. + * @param ErrId : + * @param ErrCode + * @retval None + */ +void APP_ZIGBEE_Error(uint32_t ErrId, uint32_t ErrCode) +{ + switch (ErrId) { + default: + APP_ZIGBEE_TraceError("ERROR Unknown ", 0); + break; + } +} /* APP_ZIGBEE_Error */ + +/************************************************************* + * + * LOCAL FUNCTIONS + * + *************************************************************/ + +/** + * @brief Warn the user that an error has occurred.In this case, + * the LEDs on the Board will start blinking. + * + * @param pMess : Message associated to the error. + * @param ErrCode: Error code associated to the module (Zigbee or other module if any) + * @retval None + */ +static void APP_ZIGBEE_TraceError(const char *pMess, uint32_t ErrCode) +{ + APP_DBG("**** Fatal error = %s (Err = %d)", pMess, ErrCode); + while (1U == 1U) { + BSP_LED_Toggle(LED1); + HAL_Delay(500U); + BSP_LED_Toggle(LED2); + HAL_Delay(500U); + BSP_LED_Toggle(LED3); + HAL_Delay(500U); + } +} /* APP_ZIGBEE_TraceError */ + +/** + * @brief Check if the Coprocessor Wireless Firmware loaded supports Zigbee + * and display associated informations + * @param None + * @retval None + */ +static void APP_ZIGBEE_CheckWirelessFirmwareInfo(void) +{ + WirelessFwInfo_t wireless_info_instance; + WirelessFwInfo_t *p_wireless_info = &wireless_info_instance; + + if (SHCI_GetWirelessFwInfo(p_wireless_info) != SHCI_Success) { + APP_ZIGBEE_Error((uint32_t)ERR_ZIGBEE_CHECK_WIRELESS, (uint32_t)ERR_INTERFACE_FATAL); + } + else { + APP_DBG("**********************************************************"); + APP_DBG("WIRELESS COPROCESSOR FW:"); + /* Print version */ + APP_DBG("VERSION ID = %d.%d.%d", p_wireless_info->VersionMajor, p_wireless_info->VersionMinor, p_wireless_info->VersionSub); + + switch (p_wireless_info->StackType) { + case INFO_STACK_TYPE_ZIGBEE: + APP_DBG("FW Type : Zigbee stack"); + break; + default: + /* No Zigbee device supported ! */ + APP_ZIGBEE_Error((uint32_t)ERR_ZIGBEE_CHECK_WIRELESS, (uint32_t)ERR_INTERFACE_FATAL); + break; + } + APP_DBG("**********************************************************"); + } +} /* APP_ZIGBEE_CheckWirelessFirmwareInfo */ + +/************************************************************* + * + * WRAP FUNCTIONS + * + *************************************************************/ + +void APP_ZIGBEE_RegisterCmdBuffer(TL_CmdPacket_t *p_buffer) +{ + p_ZIGBEE_otcmdbuffer = p_buffer; +} /* APP_ZIGBEE_RegisterCmdBuffer */ + +Zigbee_Cmd_Request_t * ZIGBEE_Get_OTCmdPayloadBuffer(void) +{ + return (Zigbee_Cmd_Request_t *)p_ZIGBEE_otcmdbuffer->cmdserial.cmd.payload; +} /* ZIGBEE_Get_OTCmdPayloadBuffer */ + +Zigbee_Cmd_Request_t * ZIGBEE_Get_OTCmdRspPayloadBuffer(void) +{ + return (Zigbee_Cmd_Request_t *)((TL_EvtPacket_t *)p_ZIGBEE_otcmdbuffer)->evtserial.evt.payload; +} /* ZIGBEE_Get_OTCmdRspPayloadBuffer */ + +Zigbee_Cmd_Request_t * ZIGBEE_Get_NotificationPayloadBuffer(void) +{ + return (Zigbee_Cmd_Request_t *)(p_ZIGBEE_notif_M0_to_M4)->evtserial.evt.payload; +} /* ZIGBEE_Get_NotificationPayloadBuffer */ + +/** + * @brief This function is used to transfer the commands from the M4 to the M0. + * + * @param None + * @return None + */ +void ZIGBEE_CmdTransfer(void) +{ + Zigbee_Cmd_Request_t *cmd_req = (Zigbee_Cmd_Request_t *)p_ZIGBEE_otcmdbuffer->cmdserial.cmd.payload; + + /* Zigbee OT command cmdcode range 0x280 .. 0x3DF = 352 */ + p_ZIGBEE_otcmdbuffer->cmdserial.cmd.cmdcode = 0x280U; + /* Size = otCmdBuffer->Size (Number of OT cmd arguments : 1 arg = 32bits so multiply by 4 to get size in bytes) + * + ID (4 bytes) + Size (4 bytes) */ + p_ZIGBEE_otcmdbuffer->cmdserial.cmd.plen = 8U + (cmd_req->Size * 4U); + + TL_ZIGBEE_SendAppliCmdToM0(); + + /* Wait completion of cmd */ + Wait_Getting_Ack_From_M0(); +} /* ZIGBEE_CmdTransfer */ + +/** + * @brief This function is called when the M0+ acknoledge the fact that it has received a Cmd + * + * + * @param Otbuffer : a pointer to TL_EvtPacket_t + * @return None + */ +void TL_ZIGBEE_CmdEvtReceived(TL_EvtPacket_t *Otbuffer) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(Otbuffer); + + Receive_Ack_From_M0(); +} /* TL_ZIGBEE_CmdEvtReceived */ + +/** + * @brief This function is called when notification from M0+ is received. + * + * @param Notbuffer : a pointer to TL_EvtPacket_t + * @return None + */ +void TL_ZIGBEE_NotReceived(TL_EvtPacket_t *Notbuffer) +{ + p_ZIGBEE_notif_M0_to_M4 = Notbuffer; + + Receive_Notification_From_M0(); +} /* TL_ZIGBEE_NotReceived */ + +/** + * @brief This function is called before sending any ot command to the M0 + * core. The purpose of this function is to be able to check if + * there are no notifications coming from the M0 core which are + * pending before sending a new ot command. + * @param None + * @retval None + */ +void Pre_ZigbeeCmdProcessing(void) +{ + UTIL_SEQ_WaitEvt(EVENT_SYNCHRO_BYPASS_IDLE); +} /* Pre_ZigbeeCmdProcessing */ + +/** + * @brief This function waits for getting an acknowledgment from the M0. + * + * @param None + * @retval None + */ +static void Wait_Getting_Ack_From_M0(void) +{ + UTIL_SEQ_WaitEvt(EVENT_ACK_FROM_M0_EVT); +} /* Wait_Getting_Ack_From_M0 */ + +/** + * @brief Receive an acknowledgment from the M0+ core. + * Each command send by the M4 to the M0 are acknowledged. + * This function is called under interrupt. + * @param None + * @retval None + */ +static void Receive_Ack_From_M0(void) +{ + UTIL_SEQ_SetEvt(EVENT_ACK_FROM_M0_EVT); +} /* Receive_Ack_From_M0 */ + +/** + * @brief Receive a notification from the M0+ through the IPCC. + * This function is called under interrupt. + * @param None + * @retval None + */ +static void Receive_Notification_From_M0(void) +{ + CptReceiveMsgFromM0++; + UTIL_SEQ_SetTask(1U << CFG_TASK_MSG_FROM_M0_TO_M4, CFG_SCH_PRIO_0); +} /* Receive_Notification_From_M0 */ + +/** + * @brief Perform initialization of TL for Zigbee. + * @param None + * @retval None + */ +void APP_ZIGBEE_TL_INIT(void) +{ + ZigbeeConfigBuffer.p_ZigbeeOtCmdRspBuffer = (uint8_t *)&ZigbeeOtCmdBuffer; + ZigbeeConfigBuffer.p_ZigbeeNotAckBuffer = (uint8_t *)ZigbeeNotifRspEvtBuffer; + ZigbeeConfigBuffer.p_ZigbeeLoggingBuffer = (uint8_t *)ZigbeeNotifLoggingBuffer; + TL_ZIGBEE_Init(&ZigbeeConfigBuffer); +} /* APP_ZIGBEE_TL_INIT */ + +/** + * @brief Process the messages coming from the M0. + * @param None + * @retval None + */ +void APP_ZIGBEE_ProcessMsgM0ToM4(void) +{ + if (CptReceiveMsgFromM0 != 0) { + /* If CptReceiveMsgFromM0 is > 1. it means that we did not serve all the events from the radio */ + if (CptReceiveMsgFromM0 > 1U) { + APP_ZIGBEE_Error(ERR_REC_MULTI_MSG_FROM_M0, 0); + } + else { + Zigbee_CallBackProcessing(); + } + /* Reset counter */ + CptReceiveMsgFromM0 = 0; + } +} /* APP_ZIGBEE_ProcessMsgM0ToM4 */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |