diff options
Diffstat (limited to 'Projects/P-NUCLEO-WB55.Nucleo/Applications/Zigbee/Zigbee_PollControl_Server_SED/STM32_WPAN/App/app_zigbee.c')
-rw-r--r-- | Projects/P-NUCLEO-WB55.Nucleo/Applications/Zigbee/Zigbee_PollControl_Server_SED/STM32_WPAN/App/app_zigbee.c | 746 |
1 files changed, 746 insertions, 0 deletions
diff --git a/Projects/P-NUCLEO-WB55.Nucleo/Applications/Zigbee/Zigbee_PollControl_Server_SED/STM32_WPAN/App/app_zigbee.c b/Projects/P-NUCLEO-WB55.Nucleo/Applications/Zigbee/Zigbee_PollControl_Server_SED/STM32_WPAN/App/app_zigbee.c new file mode 100644 index 000000000..fe5a886b9 --- /dev/null +++ b/Projects/P-NUCLEO-WB55.Nucleo/Applications/Zigbee/Zigbee_PollControl_Server_SED/STM32_WPAN/App/app_zigbee.c @@ -0,0 +1,746 @@ +/** + ****************************************************************************** + * File Name : App/app_zigbee.c + * Description : Zigbee Application. + ****************************************************************************** + * @attention + * + * <h2><center>© Copyright (c) 2019 STMicroelectronics. + * All rights reserved.</center></h2> + * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "app_common.h" +#include "app_entry.h" +#include "dbg_trace.h" +#include "app_zigbee.h" +#include "zigbee_interface.h" +#include "shci.h" +#include "stm_logging.h" +#include "app_conf.h" +#include "stm32wbxx_core_interface_def.h" +#include "zigbee_types.h" +#include "stm32_seq.h" + +#include <assert.h> +#include "zcl/zcl.h" +#include "zcl/zcl.poll.control.h" + +/* Private defines -----------------------------------------------------------*/ +#define APP_ZIGBEE_STARTUP_FAIL_DELAY 500U +#define SW1_ENDPOINT 17 +#define CHANNEL 19 +#define HW_TS_SERVER_1MS_NB_TICKS (1*1000/CFG_TS_TICK_VAL) /* 1ms */ +#define SED_SLEEP_TIME_30S 1 /* SED base sleep unit is 30s */ + +/* Poll Control specific defines ---------------------------------------------*/ +/* Poll Control time related attribute values are in 1/4 of a second */ +/* Convert milliseconds to quarter seconds, and vice versa */ +#define POLL_CONVERT_MS_TO_QS(ms) (ms / 250U) +#define POLL_CONVERT_QS_TO_MS(qs) (qs * 250U) +#define CHECKIN_INTERVAL (4*10) /* 10s */ +#define LONG_POLL_INTERVAL (4*5) /* 5s */ + +/* external definition */ +enum ZbStatusCodeT ZbStartupWait(struct ZigBeeT *zb, struct ZbStartupT *config); + +/* Private function prototypes -----------------------------------------------*/ +static void APP_ZIGBEE_StackLayersInit(void); +static void APP_ZIGBEE_ConfigEndpoints(void); +static void APP_ZIGBEE_NwkForm(void); +static void APP_ZIGBEE_App_Init(void); +static void APP_ZIGBEE_SW1_Process(void); + +static void APP_ZIGBEE_PollControl_Server_Init(void); +static void APP_ZIGBEE_PollControl_Server_ShowAttr(void); +static void APP_ZIGBEE_PollControl_Server_FillingBindingTable(void); +static void APP_ZIGBEE_PollControl_Server_CheckinRsp_cb(struct ZbZclClusterT *clusterPtr, struct zcl_poll_checkin_rsp_t *rsp_info, + struct ZbZclAddrInfoT *srcInfo, void *arg); +static void APP_ZIGBEE_PollControl_FastPoll_End(void); + +static void APP_ZIGBEE_TraceError(const char *pMess, uint32_t ErrCode); +static void APP_ZIGBEE_CheckWirelessFirmwareInfo(void); + +static void Wait_Getting_Ack_From_M0(void); +static void Receive_Ack_From_M0(void); +static void Receive_Notification_From_M0(void); + +/* Private variables -----------------------------------------------*/ +static TL_CmdPacket_t *p_ZIGBEE_otcmdbuffer; +static TL_EvtPacket_t *p_ZIGBEE_notif_M0_to_M4; +static TL_EvtPacket_t *p_ZIGBEE_request_M0_to_M4; +static __IO uint32_t CptReceiveNotifyFromM0 = 0; +static __IO uint32_t CptReceiveRequestFromM0 = 0; + +PLACE_IN_SECTION("MB_MEM1") ALIGN(4) static TL_ZIGBEE_Config_t ZigbeeConfigBuffer; +PLACE_IN_SECTION("MB_MEM2") ALIGN(4) static TL_CmdPacket_t ZigbeeOtCmdBuffer; +PLACE_IN_SECTION("MB_MEM2") ALIGN(4) static uint8_t ZigbeeNotifRspEvtBuffer[sizeof(TL_PacketHeader_t) + TL_EVT_HDR_SIZE + 255U]; +PLACE_IN_SECTION("MB_MEM2") ALIGN(4) static uint8_t ZigbeeNotifRequestBuffer[sizeof(TL_PacketHeader_t) + TL_EVT_HDR_SIZE + 255U]; + +struct zigbee_app_info { + bool has_init; + struct ZigBeeT *zb; + enum ZbStatusCodeT join_status; + uint32_t join_delay; + + struct ZbZclClusterT *pollcontrol_server; +}; +static struct zigbee_app_info zigbee_app_info; + +static struct ZbZclPollControlServerCallbackT ZbZclPollControlServerCallbacks = { + .checkin_rsp = APP_ZIGBEE_PollControl_Server_CheckinRsp_cb, +}; + +static uint8_t TS_ID1; + +/* Functions Definition ------------------------------------------------------*/ + +/** + * @brief Poll Control client Checkin response callback + * @param clusterPtr: ZCL cluster pointer + * @param rsp_info: Checkin response + * @param srcInfo: sender address info + * @param arg: passed arguments + * @retval None + */ +static void APP_ZIGBEE_PollControl_Server_CheckinRsp_cb(struct ZbZclClusterT *clusterPtr, struct zcl_poll_checkin_rsp_t *rsp_info, + struct ZbZclAddrInfoT *srcInfo, void *arg){ + + /* Check response status */ + if(rsp_info->status != ZCL_STATUS_SUCCESS){ + APP_DBG("Error, checkin request no successfully handled by Poll Control client."); + return; + } + + APP_DBG("[POLL CONTROL] Checkin response recieved."); + + if(rsp_info->start_fast_poll){ + APP_DBG("[POLL CONTROL] Fast Poll enabled for %d seconds.\n", rsp_info->fast_poll_timeout/4); + BSP_LED_On(LED_GREEN); + APP_DBG("GREEN LED ON\n"); + HW_TS_Start(TS_ID1, POLL_CONVERT_QS_TO_MS(rsp_info->fast_poll_timeout)*HW_TS_SERVER_1MS_NB_TICKS); + } else { + APP_DBG("[POLL CONTROL] Continue with Long Poll.\n"); + } +} + +/** + * @brief Show Poll Control server local attributes + * @param None + * @retval None + */ +static void APP_ZIGBEE_PollControl_Server_ShowAttr(void){ + enum ZclStatusCodeT status; + uint32_t checkin_interval, long_interval; + uint16_t short_interval, fast_timeout; + + APP_DBG("[POLL CONTROL] Server attributes."); + + /* Get local ZCL_POLL_CHECK_IN_INTERVAL attributes value */ + checkin_interval = (uint32_t)ZbZclAttrIntegerRead(zigbee_app_info.pollcontrol_server, + ZCL_POLL_CHECK_IN_INTERVAL, NULL, &status); + if (status != ZCL_STATUS_SUCCESS){ + APP_DBG("Error reading local attribute."); + } else { + APP_DBG("[POLL CONTROL] Checkin interval: %ds", checkin_interval/4); + } + + /* Get local ZCL_POLL_LONG_POLL_INTERVAL attributes value */ + long_interval = (uint32_t)ZbZclAttrIntegerRead(zigbee_app_info.pollcontrol_server, + ZCL_POLL_LONG_POLL_INTERVAL, NULL, &status); + if (status != ZCL_STATUS_SUCCESS){ + APP_DBG("Error reading local attribute."); + } else { + APP_DBG("[POLL CONTROL] Long poll interval: %ds", long_interval/4); + } + + /* Get local ZCL_POLL_SHORT_POLL_INTERVAL attributes value */ + short_interval = (uint16_t)ZbZclAttrIntegerRead(zigbee_app_info.pollcontrol_server, + ZCL_POLL_SHORT_POLL_INTERVAL, NULL, &status); + if (status != ZCL_STATUS_SUCCESS){ + APP_DBG("Error reading local attribute."); + } else { + APP_DBG("[POLL CONTROL] Short poll interval: %ds", short_interval/4); + } + + /* Get local ZCL_POLL_FAST_POLL_TIMEOUT attributes value */ + fast_timeout = (uint16_t)ZbZclAttrIntegerRead(zigbee_app_info.pollcontrol_server, + ZCL_POLL_FAST_POLL_TIMEOUT, NULL, &status); + if (status != ZCL_STATUS_SUCCESS){ + APP_DBG("Error reading local attribute."); + } else { + APP_DBG("[POLL CONTROL] Fast poll timeout: %ds\n", fast_timeout/4); + } +} + +/** + * @brief Adding coordinator (with Poll Control Cluster) in device binding table + * @param None + * @retval None + */ +static void APP_ZIGBEE_PollControl_Server_FillingBindingTable(void){ + ZbApsmeBindReqT bindreq; + ZbApsmeBindConfT bindconf; + uint64_t ext_addr; + + APP_DBG("[POLL CONTROL] Adding Poll Control client in the binding table."); + + /* Get the extended addr of the Poll Control client (the coordinator) */ + ext_addr = ZbNwkAddrLookupExt(zigbee_app_info.zb, 0x0); + + /* Filling binding request */ + memset(&bindreq, 0, sizeof(bindreq)); + memset(&bindconf, 0, sizeof(bindconf)); + bindreq.srcExtAddr = ZbExtendedAddress(zigbee_app_info.zb); + bindreq.srcEndpt = SW1_ENDPOINT; + bindreq.clusterId = ZCL_CLUSTER_POLL_CONTROL; + bindreq.dst.mode = ZB_APSDE_ADDRMODE_EXT; + bindreq.dst.endpoint = SW1_ENDPOINT; + bindreq.dst.extAddr = ext_addr; + + ZbApsmeBindReq(zigbee_app_info.zb,&bindreq,&bindconf); + + if(bindconf.status != ZB_WPAN_STATUS_SUCCESS){ + APP_DBG("[POLL CONTROL] Local Bind failed."); + assert(0); + } +} + +/** + * @brief Poll Control server initialization + * @param None + * @retval None + */ +static void APP_ZIGBEE_PollControl_Server_Init(void){ + enum ZclStatusCodeT status; + + /* IMPORTANT: In order for the check-in request to be submited to the client, + the client must be present in the server local binding table. */ + APP_ZIGBEE_PollControl_Server_FillingBindingTable(); + + /* ZCL_POLL_CHECK_IN_INTERVAL attribute init */ + APP_DBG("[POLL CONTROL] Writing Check-in Interval attribute."); + status = ZbZclAttrIntegerWrite(zigbee_app_info.pollcontrol_server, ZCL_POLL_CHECK_IN_INTERVAL, CHECKIN_INTERVAL); + if(status != ZCL_STATUS_SUCCESS){ + APP_DBG("[POLL CONTROL] Error writting local attribute."); + assert(0); + } + + APP_DBG("[POLL CONTROL] Poll Control server init done!\n"); +} /* APP_ZIGBEE_PollControl_Server_Init */ + +/** + * @brief Zigbee application initialization + * @param None + * @retval None + */ +static void APP_ZIGBEE_App_Init(void){ + /* Timer associated with Poll Control polling state indication */ + HW_TS_Create(CFG_TIM_ZIGBEE_APP_POLL_CONTROL_LED_INDICATION, &TS_ID1, hw_ts_SingleShot, APP_ZIGBEE_PollControl_FastPoll_End); + + /* Task associated with Poll Control server attributes print */ + UTIL_SEQ_RegTask(1U << CFG_TASK_ZIGBEE_APP_POLL_CONTROL_SHOW_ATTR, + UTIL_SEQ_RFU, APP_ZIGBEE_PollControl_Server_ShowAttr); + /* Task associated with push button SW1 */ + UTIL_SEQ_RegTask(1U << CFG_TASK_BUTTON_SW1, UTIL_SEQ_RFU, APP_ZIGBEE_SW1_Process); + + /* Initialize Zigbee Poll Control Server parameters */ + APP_ZIGBEE_PollControl_Server_Init(); +} /* APP_ZIGBEE_App_Init */ + +static void APP_ZIGBEE_PollControl_FastPoll_End(void){ + BSP_LED_Off(LED_GREEN); + APP_DBG("GREEN LED OFF\n"); +} + +/** + * @brief Zigbee application initialization + * @param None + * @retval None + */ +void APP_ZIGBEE_Init(void) +{ + SHCI_CmdStatus_t ZigbeeInitStatus; + + APP_DBG("APP_ZIGBEE_Init"); + + /* Check the compatibility with the Coprocessor Wireless Firmware loaded */ + APP_ZIGBEE_CheckWirelessFirmwareInfo(); + + /* Register cmdbuffer */ + APP_ZIGBEE_RegisterCmdBuffer(&ZigbeeOtCmdBuffer); + + /* Init config buffer and call TL_ZIGBEE_Init */ + APP_ZIGBEE_TL_INIT(); + + /* Register task */ + /* Create the different tasks */ + UTIL_SEQ_RegTask(1U << (uint32_t)CFG_TASK_NOTIFY_FROM_M0_TO_M4, UTIL_SEQ_RFU, APP_ZIGBEE_ProcessNotifyM0ToM4); + UTIL_SEQ_RegTask(1U << (uint32_t)CFG_TASK_REQUEST_FROM_M0_TO_M4, UTIL_SEQ_RFU, APP_ZIGBEE_ProcessRequestM0ToM4); + + /* Task associated with network creation process */ + UTIL_SEQ_RegTask(1U << CFG_TASK_ZIGBEE_NETWORK_FORM, UTIL_SEQ_RFU, APP_ZIGBEE_NwkForm); + + /* Task associated with application init */ + UTIL_SEQ_RegTask(1U << CFG_TASK_ZIGBEE_APP_START, UTIL_SEQ_RFU, APP_ZIGBEE_App_Init); + /* Start the Zigbee on the CPU2 side */ + ZigbeeInitStatus = SHCI_C2_ZIGBEE_Init(); + /* Prevent unused argument(s) compilation warning */ + UNUSED(ZigbeeInitStatus); + + /* Initialize Zigbee stack layers */ + APP_ZIGBEE_StackLayersInit(); + + + +} /* APP_ZIGBEE_Init */ + +/** + * @brief Initialize Zigbee stack layers + * @param None + * @retval None + */ +static void APP_ZIGBEE_StackLayersInit(void) +{ + APP_DBG("APP_ZIGBEE_StackLayersInit"); + + zigbee_app_info.zb = ZbInit(0U, NULL, NULL); + assert(zigbee_app_info.zb != NULL); + + /* Create the endpoint and cluster(s) */ + APP_ZIGBEE_ConfigEndpoints(); + + BSP_LED_Off(LED_RED); + BSP_LED_Off(LED_GREEN); + BSP_LED_Off(LED_BLUE); + + /* Configure the joining parameters */ + zigbee_app_info.join_status = 0x01; /* init to error status */ + zigbee_app_info.join_delay = HAL_GetTick(); /* now */ + + /* Initialization Complete */ + zigbee_app_info.has_init = true; + + /* run the task */ + UTIL_SEQ_SetTask(1U << CFG_TASK_ZIGBEE_NETWORK_FORM, CFG_SCH_PRIO_0); +} /* APP_ZIGBEE_StackLayersInit */ + +/** + * @brief Configure Zigbee application endpoints + * @param None + * @retval None + */ +static void APP_ZIGBEE_ConfigEndpoints(void) +{ + ZbApsmeAddEndpointReqT req; + ZbApsmeAddEndpointConfT conf; + + memset(&req, 0, sizeof(req)); + req.profileId = ZCL_PROFILE_HOME_AUTOMATION; + req.deviceId = ZCL_DEVICE_WHITE_GOODS; + + /* Endpoint: SW1_ENDPOINT */ + req.endpoint = SW1_ENDPOINT; + ZbZclAddEndpoint(zigbee_app_info.zb, &req, &conf); + assert(conf.status == ZB_STATUS_SUCCESS); + + /* Poll Control Server */ + zigbee_app_info.pollcontrol_server = zcl_poll_server_alloc(zigbee_app_info.zb, SW1_ENDPOINT, + &ZbZclPollControlServerCallbacks, NULL); + assert(zigbee_app_info.pollcontrol_server != NULL); + ZbZclClusterEndpointRegister(zigbee_app_info.pollcontrol_server); +} /* APP_ZIGBEE_ConfigEndpoints */ + +/** + * @brief Handle Zigbee network forming and joining + * @param None + * @retval None + */ +static void APP_ZIGBEE_NwkForm(void) +{ + if ((zigbee_app_info.join_status != ZB_STATUS_SUCCESS) && (HAL_GetTick() >= zigbee_app_info.join_delay)) + { + struct ZbStartupT config; + enum ZbStatusCodeT status; + + /* Configure Zigbee Logging (only need to do this once, but this is a good place to put it) */ + ZbSetLogging(zigbee_app_info.zb, ZB_LOG_MASK_LEVEL_5, NULL); + + /* Attempt to join a zigbee network */ + ZbStartupConfigGetProDefaults(&config); + + APP_DBG("Network config : APP_STARTUP_CENTRALIZED_ROUTER"); + config.startupControl = ZbStartTypeJoin; + + /* Using the default HA preconfigured Link Key */ + memcpy(config.security.preconfiguredLinkKey, sec_key_ha, ZB_SEC_KEYSIZE); + config.channelList.count = 1; + config.channelList.list[0].page = 0; + config.channelList.list[0].channelMask = 1 << CHANNEL; /* Channel in use */ + + /* Add Sleepy End device configuration */ + config.capability &= ~(MCP_ASSOC_CAP_RXONIDLE | MCP_ASSOC_CAP_DEV_TYPE | MCP_ASSOC_CAP_ALT_COORD); + config.endDeviceTimeout = 1*SED_SLEEP_TIME_30S /* 1 x (30sec sleep time unit) => 30s sleepy cycle */; + + + /* Using ZbStartupWait (blocking) here instead of ZbStartup, in order to demonstrate how to do + * a blocking call on the M4. */ + status = ZbStartupWait(zigbee_app_info.zb, &config); + + APP_DBG("ZbStartup Callback (status = 0x%02x)", status); + zigbee_app_info.join_status = status; + + if (status == ZB_STATUS_SUCCESS) { + zigbee_app_info.join_delay = 0U; + BSP_LED_On(LED_BLUE); + } + else + { + APP_DBG("Startup failed, attempting again after a short delay (%d ms)", APP_ZIGBEE_STARTUP_FAIL_DELAY); + zigbee_app_info.join_delay = HAL_GetTick() + APP_ZIGBEE_STARTUP_FAIL_DELAY; + } + } + + /* If Network forming/joining was not successful reschedule the current task to retry the process */ + if (zigbee_app_info.join_status != ZB_STATUS_SUCCESS) + { + UTIL_SEQ_SetTask(1U << CFG_TASK_ZIGBEE_NETWORK_FORM, CFG_SCH_PRIO_0); + } + else + { + + /* Since we're using group addressing (broadcast), shorten the broadcast timeout */ + uint32_t bcast_timeout = 3; + ZbNwkSet(zigbee_app_info.zb, ZB_NWK_NIB_ID_NetworkBroadcastDeliveryTime, &bcast_timeout, sizeof(bcast_timeout)); + + /* Starting application init task */ + UTIL_SEQ_SetTask(1U << CFG_TASK_ZIGBEE_APP_START, CFG_SCH_PRIO_0); + } +} /* APP_ZIGBEE_NwkForm */ + +/************************************************************* + * ZbStartupWait Blocking Call + *************************************************************/ +struct ZbStartupWaitInfo { + bool active; + enum ZbStatusCodeT status; +}; + +static void ZbStartupWaitCb(enum ZbStatusCodeT status, void *cb_arg) +{ + struct ZbStartupWaitInfo *info = cb_arg; + + info->status = status; + info->active = false; + UTIL_SEQ_SetEvt(EVENT_ZIGBEE_STARTUP_ENDED); +} /* ZbStartupWaitCb */ + +enum ZbStatusCodeT ZbStartupWait(struct ZigBeeT *zb, struct ZbStartupT *config) +{ + struct ZbStartupWaitInfo *info; + enum ZbStatusCodeT status; + + info = malloc(sizeof(struct ZbStartupWaitInfo)); + if (info == NULL) { + return ZB_STATUS_ALLOC_FAIL; + } + memset(info, 0, sizeof(struct ZbStartupWaitInfo)); + + info->active = true; + status = ZbStartup(zb, config, ZbStartupWaitCb, info); + if (status != ZB_STATUS_SUCCESS) { + info->active = false; + return status; + } + UTIL_SEQ_WaitEvt(EVENT_ZIGBEE_STARTUP_ENDED); + status = info->status; + free(info); + return status; +} /* ZbStartupWait */ + +/** + * @brief Trace the error or the warning reported. + * @param ErrId : + * @param ErrCode + * @retval None + */ +void APP_ZIGBEE_Error(uint32_t ErrId, uint32_t ErrCode) +{ + switch (ErrId) { + default: + APP_ZIGBEE_TraceError("ERROR Unknown ", 0); + break; + } +} /* APP_ZIGBEE_Error */ + +/************************************************************* + * + * LOCAL FUNCTIONS + * + *************************************************************/ + +/** + * @brief Warn the user that an error has occurred.In this case, + * the LEDs on the Board will start blinking. + * + * @param pMess : Message associated to the error. + * @param ErrCode: Error code associated to the module (Zigbee or other module if any) + * @retval None + */ +static void APP_ZIGBEE_TraceError(const char *pMess, uint32_t ErrCode) +{ + APP_DBG("**** Fatal error = %s (Err = %d)", pMess, ErrCode); + while (1U == 1U) { + BSP_LED_Toggle(LED1); + HAL_Delay(500U); + BSP_LED_Toggle(LED2); + HAL_Delay(500U); + BSP_LED_Toggle(LED3); + HAL_Delay(500U); + } +} /* APP_ZIGBEE_TraceError */ + +/** + * @brief Check if the Coprocessor Wireless Firmware loaded supports Zigbee + * and display associated informations + * @param None + * @retval None + */ +static void APP_ZIGBEE_CheckWirelessFirmwareInfo(void) +{ + WirelessFwInfo_t wireless_info_instance; + WirelessFwInfo_t *p_wireless_info = &wireless_info_instance; + + if (SHCI_GetWirelessFwInfo(p_wireless_info) != SHCI_Success) { + APP_ZIGBEE_Error((uint32_t)ERR_ZIGBEE_CHECK_WIRELESS, (uint32_t)ERR_INTERFACE_FATAL); + } + else { + APP_DBG("**********************************************************"); + APP_DBG("WIRELESS COPROCESSOR FW:"); + /* Print version */ + APP_DBG("VERSION ID = %d.%d.%d", p_wireless_info->VersionMajor, p_wireless_info->VersionMinor, p_wireless_info->VersionSub); + + switch (p_wireless_info->StackType) { + case INFO_STACK_TYPE_ZIGBEE_FFD: + APP_DBG("FW Type : FFD Zigbee stack"); + break; + case INFO_STACK_TYPE_ZIGBEE_RFD: + APP_DBG("FW Type : RFD Zigbee stack"); + break; + default: + /* No Zigbee device supported ! */ + APP_ZIGBEE_Error((uint32_t)ERR_ZIGBEE_CHECK_WIRELESS, (uint32_t)ERR_INTERFACE_FATAL); + break; + } + APP_DBG("**********************************************************"); + } +} /* APP_ZIGBEE_CheckWirelessFirmwareInfo */ + + +/** + * @brief Button 1 callback + * @param None + * @retval None + */ +static void APP_ZIGBEE_SW1_Process(void) +{ + UTIL_SEQ_SetTask(1U << CFG_TASK_ZIGBEE_APP_POLL_CONTROL_SHOW_ATTR, CFG_SCH_PRIO_0); +} /* APP_ZIGBEE_SW1_Process */ + +/************************************************************* + * + * WRAP FUNCTIONS + * + *************************************************************/ + +void APP_ZIGBEE_RegisterCmdBuffer(TL_CmdPacket_t *p_buffer) +{ + p_ZIGBEE_otcmdbuffer = p_buffer; +} /* APP_ZIGBEE_RegisterCmdBuffer */ + +Zigbee_Cmd_Request_t * ZIGBEE_Get_OTCmdPayloadBuffer(void) +{ + return (Zigbee_Cmd_Request_t *)p_ZIGBEE_otcmdbuffer->cmdserial.cmd.payload; +} /* ZIGBEE_Get_OTCmdPayloadBuffer */ + +Zigbee_Cmd_Request_t * ZIGBEE_Get_OTCmdRspPayloadBuffer(void) +{ + return (Zigbee_Cmd_Request_t *)((TL_EvtPacket_t *)p_ZIGBEE_otcmdbuffer)->evtserial.evt.payload; +} /* ZIGBEE_Get_OTCmdRspPayloadBuffer */ + +Zigbee_Cmd_Request_t * ZIGBEE_Get_NotificationPayloadBuffer(void) +{ + return (Zigbee_Cmd_Request_t *)(p_ZIGBEE_notif_M0_to_M4)->evtserial.evt.payload; +} /* ZIGBEE_Get_NotificationPayloadBuffer */ + +Zigbee_Cmd_Request_t * ZIGBEE_Get_M0RequestPayloadBuffer(void) +{ + return (Zigbee_Cmd_Request_t *)(p_ZIGBEE_request_M0_to_M4)->evtserial.evt.payload; +} + +/** + * @brief This function is used to transfer the commands from the M4 to the M0. + * + * @param None + * @return None + */ +void ZIGBEE_CmdTransfer(void) +{ + Zigbee_Cmd_Request_t *cmd_req = (Zigbee_Cmd_Request_t *)p_ZIGBEE_otcmdbuffer->cmdserial.cmd.payload; + + /* Zigbee OT command cmdcode range 0x280 .. 0x3DF = 352 */ + p_ZIGBEE_otcmdbuffer->cmdserial.cmd.cmdcode = 0x280U; + /* Size = otCmdBuffer->Size (Number of OT cmd arguments : 1 arg = 32bits so multiply by 4 to get size in bytes) + * + ID (4 bytes) + Size (4 bytes) */ + p_ZIGBEE_otcmdbuffer->cmdserial.cmd.plen = 8U + (cmd_req->Size * 4U); + + TL_ZIGBEE_SendM4RequestToM0(); + + /* Wait completion of cmd */ + Wait_Getting_Ack_From_M0(); +} /* ZIGBEE_CmdTransfer */ + +/** + * @brief This function is called when the M0+ acknoledge the fact that it has received a Cmd + * + * + * @param Otbuffer : a pointer to TL_EvtPacket_t + * @return None + */ +void TL_ZIGBEE_CmdEvtReceived(TL_EvtPacket_t *Otbuffer) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(Otbuffer); + + Receive_Ack_From_M0(); +} /* TL_ZIGBEE_CmdEvtReceived */ + +/** + * @brief This function is called when notification from M0+ is received. + * + * @param Notbuffer : a pointer to TL_EvtPacket_t + * @return None + */ +void TL_ZIGBEE_NotReceived(TL_EvtPacket_t *Notbuffer) +{ + p_ZIGBEE_notif_M0_to_M4 = Notbuffer; + + Receive_Notification_From_M0(); +} /* TL_ZIGBEE_NotReceived */ + +/** + * @brief This function is called before sending any ot command to the M0 + * core. The purpose of this function is to be able to check if + * there are no notifications coming from the M0 core which are + * pending before sending a new ot command. + * @param None + * @retval None + */ +void Pre_ZigbeeCmdProcessing(void) +{ + UTIL_SEQ_WaitEvt(EVENT_SYNCHRO_BYPASS_IDLE); +} /* Pre_ZigbeeCmdProcessing */ + +/** + * @brief This function waits for getting an acknowledgment from the M0. + * + * @param None + * @retval None + */ +static void Wait_Getting_Ack_From_M0(void) +{ + UTIL_SEQ_WaitEvt(EVENT_ACK_FROM_M0_EVT); +} /* Wait_Getting_Ack_From_M0 */ + +/** + * @brief Receive an acknowledgment from the M0+ core. + * Each command send by the M4 to the M0 are acknowledged. + * This function is called under interrupt. + * @param None + * @retval None + */ +static void Receive_Ack_From_M0(void) +{ + UTIL_SEQ_SetEvt(EVENT_ACK_FROM_M0_EVT); +} /* Receive_Ack_From_M0 */ + +/** + * @brief Receive a notification from the M0+ through the IPCC. + * This function is called under interrupt. + * @param None + * @retval None + */ +static void Receive_Notification_From_M0(void) +{ + CptReceiveNotifyFromM0++; + UTIL_SEQ_SetTask(1U << (uint32_t)CFG_TASK_NOTIFY_FROM_M0_TO_M4, CFG_SCH_PRIO_0); +} + +/** + * @brief This function is called when a request from M0+ is received. + * + * @param Notbuffer : a pointer to TL_EvtPacket_t + * @return None + */ +void TL_ZIGBEE_M0RequestReceived(TL_EvtPacket_t *Reqbuffer) +{ + p_ZIGBEE_request_M0_to_M4 = Reqbuffer; + + CptReceiveRequestFromM0++; + UTIL_SEQ_SetTask(1U << (uint32_t)CFG_TASK_REQUEST_FROM_M0_TO_M4, CFG_SCH_PRIO_0); +} + +/** + * @brief Perform initialization of TL for Zigbee. + * @param None + * @retval None + */ +void APP_ZIGBEE_TL_INIT(void) +{ + ZigbeeConfigBuffer.p_ZigbeeOtCmdRspBuffer = (uint8_t *)&ZigbeeOtCmdBuffer; + ZigbeeConfigBuffer.p_ZigbeeNotAckBuffer = (uint8_t *)ZigbeeNotifRspEvtBuffer; + ZigbeeConfigBuffer.p_ZigbeeNotifRequestBuffer = (uint8_t *)ZigbeeNotifRequestBuffer; + TL_ZIGBEE_Init(&ZigbeeConfigBuffer); +} + +/** + * @brief Process the messages coming from the M0. + * @param None + * @retval None + */ +void APP_ZIGBEE_ProcessNotifyM0ToM4(void) +{ + if (CptReceiveNotifyFromM0 != 0) { + /* If CptReceiveNotifyFromM0 is > 1. it means that we did not serve all the events from the radio */ + if (CptReceiveNotifyFromM0 > 1U) { + APP_ZIGBEE_Error(ERR_REC_MULTI_MSG_FROM_M0, 0); + } + else { + Zigbee_CallBackProcessing(); + } + /* Reset counter */ + CptReceiveNotifyFromM0 = 0; + } +} + +/** + * @brief Process the requests coming from the M0. + * @param + * @return + */ +void APP_ZIGBEE_ProcessRequestM0ToM4(void) +{ + if (CptReceiveRequestFromM0 != 0) { + Zigbee_M0RequestProcessing(); + CptReceiveRequestFromM0 = 0; + } +} + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |