Welcome to mirror list, hosted at ThFree Co, Russian Federation.

github.com/Flipper-Zero/STM32CubeWB.git - Unnamed repository; edit this file 'description' to name the repository.
summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat (limited to 'Projects/P-NUCLEO-WB55.Nucleo/Examples/QSPI/QSPI_ExecuteInPlace/Src/stm32wbxx_hal_msp.c')
-rw-r--r--Projects/P-NUCLEO-WB55.Nucleo/Examples/QSPI/QSPI_ExecuteInPlace/Src/stm32wbxx_hal_msp.c37
1 files changed, 29 insertions, 8 deletions
diff --git a/Projects/P-NUCLEO-WB55.Nucleo/Examples/QSPI/QSPI_ExecuteInPlace/Src/stm32wbxx_hal_msp.c b/Projects/P-NUCLEO-WB55.Nucleo/Examples/QSPI/QSPI_ExecuteInPlace/Src/stm32wbxx_hal_msp.c
index e7e55a63d..fe46526a7 100644
--- a/Projects/P-NUCLEO-WB55.Nucleo/Examples/QSPI/QSPI_ExecuteInPlace/Src/stm32wbxx_hal_msp.c
+++ b/Projects/P-NUCLEO-WB55.Nucleo/Examples/QSPI/QSPI_ExecuteInPlace/Src/stm32wbxx_hal_msp.c
@@ -7,13 +7,12 @@
******************************************************************************
* @attention
*
- * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
- * All rights reserved.</center></h2>
+ * Copyright (c) 2019-2021 STMicroelectronics.
+ * All rights reserved.
*
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
+ * This software is licensed under terms that can be found in the LICENSE file
+ * in the root directory of this software component.
+ * If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
@@ -200,11 +199,21 @@ void HAL_QSPI_MspDeInit(QSPI_HandleTypeDef* hqspi)
void HAL_UART_MspInit(UART_HandleTypeDef* huart)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
+ RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
if(huart->Instance==USART1)
{
/* USER CODE BEGIN USART1_MspInit 0 */
/* USER CODE END USART1_MspInit 0 */
+ /** Initializes the peripherals clock
+ */
+ PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USART1;
+ PeriphClkInitStruct.Usart1ClockSelection = RCC_USART1CLKSOURCE_PCLK2;
+ if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
+ {
+ Error_Handler();
+ }
+
/* Peripheral clock enable */
__HAL_RCC_USART1_CLK_ENABLE();
@@ -265,11 +274,25 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
void HAL_PCD_MspInit(PCD_HandleTypeDef* hpcd)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
+ RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
if(hpcd->Instance==USB)
{
/* USER CODE BEGIN USB_MspInit 0 */
/* USER CODE END USB_MspInit 0 */
+ /** Initializes the peripherals clock
+ */
+ PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB;
+ PeriphClkInitStruct.PLLSAI1.PLLN = 24;
+ PeriphClkInitStruct.PLLSAI1.PLLP = RCC_PLLP_DIV2;
+ PeriphClkInitStruct.PLLSAI1.PLLQ = RCC_PLLQ_DIV2;
+ PeriphClkInitStruct.PLLSAI1.PLLR = RCC_PLLR_DIV2;
+ PeriphClkInitStruct.PLLSAI1.PLLSAI1ClockOut = RCC_PLLSAI1_USBCLK;
+ PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_PLLSAI1;
+ if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
+ {
+ Error_Handler();
+ }
__HAL_RCC_GPIOA_CLK_ENABLE();
/**USB GPIO Configuration
@@ -324,5 +347,3 @@ void HAL_PCD_MspDeInit(PCD_HandleTypeDef* hpcd)
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/