diff options
Diffstat (limited to 'Projects/P-NUCLEO-WB55.Nucleo/Examples_LL/WWDG/WWDG_RefreshUntilUserEvent_Init/readme.txt')
-rw-r--r-- | Projects/P-NUCLEO-WB55.Nucleo/Examples_LL/WWDG/WWDG_RefreshUntilUserEvent_Init/readme.txt | 66 |
1 files changed, 66 insertions, 0 deletions
diff --git a/Projects/P-NUCLEO-WB55.Nucleo/Examples_LL/WWDG/WWDG_RefreshUntilUserEvent_Init/readme.txt b/Projects/P-NUCLEO-WB55.Nucleo/Examples_LL/WWDG/WWDG_RefreshUntilUserEvent_Init/readme.txt new file mode 100644 index 000000000..1904c5a07 --- /dev/null +++ b/Projects/P-NUCLEO-WB55.Nucleo/Examples_LL/WWDG/WWDG_RefreshUntilUserEvent_Init/readme.txt @@ -0,0 +1,66 @@ +/** + @page WWDG_RefreshUntilUserEvent_Init WWDG example + + @verbatim + ****************************************************************************** + * @file Examples_LL/WWDG/WWDG_RefreshUntilUserEvent_Init/readme.txt + * @author MCD Application Team + * @brief Description of the WWDG_RefreshUntilUserEvent_Init example. + ****************************************************************************** + * + * Copyright (c) 2019 STMicroelectronics. All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + @endverbatim + +@par Example Description + +Configuration of the WWDG to periodically update the counter and +generate an MCU WWDG reset when a user button is pressed. The peripheral initialization +uses the LL unitary service functions for optimization purposes (performance and size). + +Example Configuration: +Configure the WWDG (Window, Prescaler & Counter) and enable it. +Refresh the WWDG downcounter in the main loop - LED2 is blinking fastly & continuously + +Example Execution: +When User push-button (SW1) is pressed, the Downcounter automatic refresh mechanism is disable and thus, reset will occur. +After a reset when re-entering in the main, RCC WWDG Reset Flag will be checked and if we are back from a WWDG reset the LED2 will be switch ON. + +Waiting a new User push-button (SW1) pressed to re-activate the WWDG + +@par Keywords + +System, WWDG, Timeout, Refresh, Counter update, MCU Reset, Downcounter, Event, Window + +@par Directory contents + + - WWDG/WWDG_RefreshUntilUserEvent_Init/Inc/stm32wbxx_it.h Interrupt handlers header file + - WWDG/WWDG_RefreshUntilUserEvent_Init/Inc/main.h Header for main.c module + - WWDG/WWDG_RefreshUntilUserEvent_Init/Inc/stm32_assert.h Template file to include assert_failed function + - WWDG/WWDG_RefreshUntilUserEvent_Init/Src/stm32wbxx_it.c Interrupt handlers + - WWDG/WWDG_RefreshUntilUserEvent_Init/Src/main.c Main program + - WWDG/WWDG_RefreshUntilUserEvent_Init/Src/system_stm32wbxx.c STM32WBxx system source file + + +@par Hardware and Software environment + + - This example runs on STM32WB55xx devices. + + - This example has been tested with P-NUCLEO-WB55 board and can be + easily tailored to any other supported device and development board. + +@par How to use it ? + +In order to make the program work, you must do the following : + - Open your preferred toolchain + - Rebuild all files and load your image into target memory + - Run the example + + * <h3><center>© COPYRIGHT STMicroelectronics</center></h3> + */ |