diff options
Diffstat (limited to 'Projects/P-NUCLEO-WB55.USBDongle/Applications/BLE/BLE_MeshLightingDemo/STM32_WPAN/app/mesh_cfg_usr.h')
| -rw-r--r-- | Projects/P-NUCLEO-WB55.USBDongle/Applications/BLE/BLE_MeshLightingDemo/STM32_WPAN/app/mesh_cfg_usr.h | 341 |
1 files changed, 204 insertions, 137 deletions
diff --git a/Projects/P-NUCLEO-WB55.USBDongle/Applications/BLE/BLE_MeshLightingDemo/STM32_WPAN/app/mesh_cfg_usr.h b/Projects/P-NUCLEO-WB55.USBDongle/Applications/BLE/BLE_MeshLightingDemo/STM32_WPAN/app/mesh_cfg_usr.h index 520553c69..216d69fca 100644 --- a/Projects/P-NUCLEO-WB55.USBDongle/Applications/BLE/BLE_MeshLightingDemo/STM32_WPAN/app/mesh_cfg_usr.h +++ b/Projects/P-NUCLEO-WB55.USBDongle/Applications/BLE/BLE_MeshLightingDemo/STM32_WPAN/app/mesh_cfg_usr.h @@ -2,8 +2,8 @@ ****************************************************************************** * @file mesh_cfg_usr.h * @author BLE Mesh Team -* @version V1.10.000 -* @date 15-Jan-2019 +* @version V1.12.000 +* @date 06-12-2019 * @brief Header file for mesh_usr_cfg.c ****************************************************************************** * @attention @@ -69,6 +69,8 @@ Either use 0 to disable or 1 to enable #define TF_LIGHT_LC 0 #define TF_SENSOR 0 #define TF_VENDOR 0 +#define TF_COMMON 0 +#define TF_VENDOR_COMMAND 0 #define TF_NEIGHBOUR 0 #define TF_LPN_FRND 0 #define TF_ELEMENTS 0 @@ -77,26 +79,38 @@ Either use 0 to disable or 1 to enable #define TF_HANDLER 0 #define TF_INIT 0 #define TF_MISC 0 +#define TF_MEMORY 0 #define TF_SERIAL_CTRL 0 +#define TF_BEACON 0 +#define TF_GENERIC_CLIENT 0 +#define TF_LIGHT_CLIENT 0 +#define TF_CONFIG_CLIENT 0 +#define TF_LIGHT_CLIENT 0 /******************************************************************************* *** Following section helps to select right configuration of Models *********** *******************************************************************************/ /******* Define the following Macros to enable the usage of the Models ******/ +#ifdef CLIENT +#define ENABLE_GENERIC_MODEL_SERVER_ONOFF +#endif + +#ifdef SERVER /* Define the following Macros to enable the usage of the Server Generic Models */ #define ENABLE_GENERIC_MODEL_SERVER_ONOFF #define ENABLE_GENERIC_MODEL_SERVER_LEVEL -#define ENABLE_GENERIC_MODEL_SERVER_POWER_ONOFF -#define ENABLE_GENERIC_MODEL_SERVER_POWER_ONOFF_SETUP +//#define ENABLE_GENERIC_MODEL_SERVER_POWER_ONOFF +//#define ENABLE_GENERIC_MODEL_SERVER_POWER_ONOFF_SETUP //#define ENABLE_GENERIC_MODEL_SERVER_DEFAULT_TRANSITION_TIME /* The Following Models are not available in this version, will be developed in next version. */ + +//#define ENABLE_GENERIC_MODEL_SERVER_POWER_LEVEL +//#define ENABLE_GENERIC_MODEL_SERVER_POWER_LEVEL_SETUP /* -#define ENABLE_GENERIC_MODEL_SERVER_POWER_LEVEL -#define ENABLE_GENERIC_MODEL_SERVER_POWER_LEVEL_SETUP #define ENABLE_GENERIC_MODEL_SERVER_BATTERY #define ENABLE_GENERIC_MODEL_SERVER_LOCATION #define ENABLE_GENERIC_MODEL_SERVER_LOCATION_SETUP @@ -104,12 +118,7 @@ Either use 0 to disable or 1 to enable #define ENABLE_GENERIC_MODEL_SERVER_MANUFACTURER_PROPERTY #define ENABLE_GENERIC_MODEL_SERVER_USER_PROPERTY #define ENABLE_GENERIC_MODEL_SERVER_CLIENT_PROPERTY -*/ -/* Define the following Macros to enable the usage of the Client Generic Models */ -/* -#define ENABLE_GENERIC_MODEL_CLIENT_ONOFF -#define ENABLE_GENERIC_MODEL_CLIENT_LEVEL */ /******************************************************************************/ @@ -118,19 +127,35 @@ Either use 0 to disable or 1 to enable #define ENABLE_LIGHT_MODEL_SERVER_LIGHTNESS #define ENABLE_LIGHT_MODEL_SERVER_LIGHTNESS_SETUP -#define ENABLE_LIGHT_MODEL_SERVER_CTL -#define ENABLE_LIGHT_MODEL_SERVER_CTL_SETUP -#define ENABLE_LIGHT_MODEL_SERVER_CTL_TEMPERATURE -#define ENABLE_LIGHT_MODEL_SERVER_HSL -#define ENABLE_LIGHT_MODEL_SERVER_HSL_SETUP -#define ENABLE_LIGHT_MODEL_SERVER_HSL_HUE -#define ENABLE_LIGHT_MODEL_SERVER_HSL_SATURATION +//#define ENABLE_LIGHT_MODEL_SERVER_CTL +//#define ENABLE_LIGHT_MODEL_SERVER_CTL_SETUP +//#define ENABLE_LIGHT_MODEL_SERVER_CTL_TEMPERATURE +//#define ENABLE_LIGHT_MODEL_SERVER_HSL +//#define ENABLE_LIGHT_MODEL_SERVER_HSL_SETUP +//#define ENABLE_LIGHT_MODEL_SERVER_HSL_HUE +//#define ENABLE_LIGHT_MODEL_SERVER_HSL_SATURATION /* The following Models are managed in different file light_lc.c in middleware */ -#define ENABLE_LIGHT_MODEL_SERVER_LC -#define ENABLE_LIGHT_MODEL_SERVER_LC_SETUP +//#define ENABLE_LIGHT_MODEL_SERVER_LC +//#define ENABLE_LIGHT_MODEL_SERVER_LC_SETUP + +/******************************************************************************/ +/* Define the following Macros to enable the usage of the Sensor Models */ +/******************************************************************************/ + +//#define ENABLE_SENSOR_MODEL_SERVER +//#define ENABLE_SENSOR_MODEL_SERVER_SETUP + +/******************************************************************************/ +/* Define the following Macros to enable the usage of the time and scene Models */ +/******************************************************************************/ + +//#define ENABLE_TIME_MODEL_SERVER +//#define ENABLE_TIME_MODEL_SERVER_SETUP +//#define ENABLE_SCENE_MODEL_SERVER +//#define ENABLE_SCENE_MODEL_SERVER_SETUP /* The Following Models are not available in this version @@ -138,29 +163,42 @@ Either use 0 to disable or 1 to enable //#define ENABLE_LIGHT_MODEL_SERVER_XYL //#define ENABLE_LIGHT_MODEL_SERVER_XYL_SETUP - -/* Following Macro helps to know if the Fixed functions are needed or not - DO NOT change or add any space at the end of the file */ -#if defined(ENABLE_LIGHT_MODEL_SERVER_LIGHTNESS) \ - || defined(ENABLE_LIGHT_MODEL_SERVER_LIGHTNESS_SETUP) \ - || defined(ENABLE_LIGHT_MODEL_SERVER_CTL) \ - || defined(ENABLE_LIGHT_MODEL_SERVER_CTL_SETUP) \ - || defined(ENABLE_LIGHT_MODEL_SERVER_CTL_TEMPERATURE) \ - || defined(ENABLE_LIGHT_MODEL_SERVER_HSL) \ - || defined(ENABLE_LIGHT_MODEL_SERVER_HSL_SETUP) \ - || defined(ENABLE_LIGHT_MODEL_SERVER_HSL_HUE) \ - || defined(ENABLE_LIGHT_MODEL_SERVER_HSL_SATURATION) \ - || defined(ENABLE_LIGHT_MODEL_SERVER_LC) \ - || defined(ENABLE_LIGHT_MODEL_SERVER_LC_SETUP) \ - || defined(ENABLE_LIGHT_MODEL_SERVER_XYL) \ - || defined(ENABLE_LIGHT_MODEL_SERVER_XYL_SETUP) - #define ENABLE_LIGHT_MODEL_SERVER +/******* Define the following Macros to enable the vendor model ******/ +//#define ENABLE_VENDOR_MODEL_SERVER +#define GENERIC_SERVER_MODEL_PUBLISH #endif + +#ifdef CLIENT +/* Define the following Macros to enable the usage of the Client Generic Models */ +#define ENABLE_GENERIC_MODEL_CLIENT_ONOFF +#define ENABLE_GENERIC_MODEL_CLIENT_LEVEL +#define ENABLE_LIGHT_MODEL_CLIENT_LIGHTNESS +#define ENABLE_CONFIG_MODEL_CLIENT + +/******************************************************************************/ +/* +Define the Macro for enabling/disabling the Publishing with Generic on off +or by Vendor Model. +@ define Macro for Vendor Publishing +@ Undefine or comment Macro for Generic On Off Publishing +*/ +//#define VENDOR_CLIENT_MODEL_PUBLISH +#define GENERIC_CLIENT_MODEL_PUBLISH +//#define LIGHT_CLIENT_MODEL_PUBLISH + +#if defined (ENABLE_GENERIC_MODEL_CLIENT_ONOFF) \ + || defined (ENABLE_GENERIC_MODEL_CLIENT_LEVEL) -#if defined(ENABLE_LIGHT_MODEL_SERVER_LC) \ - || defined(ENABLE_LIGHT_MODEL_SERVER_LC_SETUP) - #define ENABLE_LIGHT_LC_MODEL_SERVER + #define ENABLE_GENERIC_MODEL_CLIENT +#endif + +#if defined (ENABLE_LIGHT_MODEL_CLIENT_LIGHTNESS) + + #define ENABLE_LIGHT_MODEL_CLIENT #endif + +#endif + /******************************************************************************/ /* Define the Macros for Enabling/disabling the binding of data between the Generic @@ -171,17 +209,9 @@ and Light model. /******************************************************************************/ //#define ENABLE_MODEL_BINDING - -/******************************************************************************/ -/* Define the following Macros to enable the usage of the Sensor Models */ -/******************************************************************************/ - -#define ENABLE_SENSOR_MODEL_SERVER -#define ENABLE_SENSOR_MODEL_SERVER_SETUP - /* Define the macros for the numbers of sensor present.*/ #define NUMBER_OF_SENSOR 2 -#define ENABLE_OCCUPANCY_SENSOR +//#define ENABLE_OCCUPANCY_SENSOR /* Macro is responsible for enabling and desabling the sensor publication. Comment this macro to disable the publication @@ -189,44 +219,6 @@ Comment this macro to disable the publication //#define ENABLE_SENSOR_PUBLICATION /******************************************************************************/ -/* Define the following Macros to enable the usage of the time and scene Models */ -/******************************************************************************/ - -//#define ENABLE_TIME_MODEL_SERVER -//#define ENABLE_TIME_MODEL_SERVER_SETUP -//#define ENABLE_SCENE_MODEL_SERVER -//#define ENABLE_SCENE_MODEL_SERVER_SETUP - -/******************************************************************************/ -/* -Macros are defined to enable the setting for the PWM. these Macros are given for -eval board of BlueNRG-1 and BlueNRG-2, costom board and STEVAL-BLUEMIC-1 board -and default transition inserted in generic on off. -IMPORTATNT NOTE- STEVAL_BLUENRG_1_BOARD_PWM_SELECTION - STEVAL_BLUENRG_2_BOARD_PWM_SELECTION - STEVAL_BLUEMIC_1_BOARD_PWM_SELECTION - CUSTOM_BOARD_PWM_SELECTION - GENERIC_ONOFF_DEFAULT_TRANSITION_ENABLE -Only one macro must be enabled at one time from list of mocros provided here, -otherwise get confliction and firmware will not work properly. -*/ -/******************************************************************************/ -//#define STEVAL_BLUENRG_1_BOARD_PWM_SELECTION -//#define STEVAL_BLUENRG_2_BOARD_PWM_SELECTION -//#define STEVAL_BLUEMIC_1_BOARD_PWM_SELECTION -//#define CUSTOM_BOARD_PWM_SELECTION - - -/******************************************************************************/ -/* -Define the Macro for enabling/disabling the Publishing with Generic on off -or by Vendor Model. -@ define Macro for Vendor Publishing -@ Undefine or comment Macro for Generic On Off Publishing -*/ -//#define VENDOR_MODEL_PUBLISH - -/******************************************************************************/ /* Maximum Time period value of PWM */ @@ -256,8 +248,13 @@ This may result into excessive flash erase operations, this should be avoided to /* Only one Macro will be enable at one time */ //#define SAVE_MODEL_STATE_FOR_ALL_MESSAGES -#define SAVE_MODEL_STATE_POWER_FAILURE_DETECTION +//#define SAVE_MODEL_STATE_POWER_FAILURE_DETECTION +/* +Define the following Macro to save the nodes data in provisioner in NVM +This may result into excessive flash erase operations, this should be avoided to ensure flash longevity +*/ +#define SAVE_EMBD_PROVISION_DATA 1 /* Macros defined for the number of bytes saved, number of bytes dedicated for ganeric model and light model. */ @@ -281,40 +278,18 @@ This may result into excessive flash erase operations, this should be avoided to //#define USER_BOARD_COOL_WHITE_LED //#define USER_BOARD_RGB_LED -#if defined(STEVAL_BLUEMIC_1_BOARD_PWM_SELECTION) - #define SINGLE_LED PWM1 -#endif - -/******************************************************************************* -*** Following section helps to configure the LEDs of Application of Mesh *********** -*******************************************************************************/ - -#if defined STEVAL_BLUENRG_1_BOARD_PWM_SELECTION || defined STEVAL_BLUENRG_2_BOARD_PWM_SELECTION - #define SINGLE_LED PWM4 - #define COOL_LED PWM0 - #define WARM_LED PWM1 - #define RED_LED PWM2 - #define GREEN_LED PWM3 - #define BLUE_LED PWM4 -#endif +/* Note: Please use Full Library configuration in project options to use the full + configuration of the C/C++ runtime library for printf and scanf functionality */ -#if defined CUSTOM_BOARD_PWM_SELECTION || defined USE_STM32WBXX_NUCLEO || defined USE_STM32WBXX_USB_DONGLE - #define SINGLE_LED PWM4 - #define COOL_LED PWM0 - #define WARM_LED PWM1 - #define RED_LED PWM2 - #define GREEN_LED PWM3 - #define BLUE_LED PWM4 +/* Enables the serial interface using Uart */ +#define ENABLE_SERIAL_INTERFACE 1 +#define ENABLE_UT 0 +#define ENABLE_SERIAL_CONTROL 1 +#define ENABLE_APPLI_TEST 0 +#ifdef CLIENT +#define ENABLE_SERIAL_PRVN 1 #endif - -#ifdef STEVAL_BLUEMIC_1_BOARD_PWM_SELECTION - #define SINGLE_LED PWM1 - #define COOL_LED PWM0 - #define WARM_LED PWM1 - #define RED_LED PWM2 - #define GREEN_LED PWM3 - #define BLUE_LED PWM4 -#endif + /******************************************************************************* *** Following section helps to configure the Application of Mesh *********** *******************************************************************************/ @@ -327,13 +302,15 @@ For STMicroelectronics : it is 0x0030 */ #define COMPANY_ID 0x0030 /* Contains a 16-bit vendor-assigned product identifier */ -#define PRODUCT_ID 0x0001 +#define PRODUCT_ID 0x0002 /* Contains a 16-bit vendor-assigned product version ID */ -#define PRODUCT_VERSION_ID 0x0001 +#define PRODUCT_VERSION_ID 0x010A #define MAX_APPLICATION_PACKET_SIZE 160 +#define TPT_SEGMENT_COUNT (((MAX_APPLICATION_PACKET_SIZE)/12)+2) + /******************************************************************************* ********** MAC Address Configuration ******************************************* *******************************************************************************/ @@ -366,14 +343,14 @@ For STMicroelectronics : it is 0x0030 */ /* -* Different provision bearer supported by BlueNRG-Mesh. Define according to application. +* Different provision bearer supported by BLE-Mesh. Define according to application. * Atleast one of PB-ADV and PB-GATT should be defined */ #define ENABLE_PB_ADV #define ENABLE_PB_GATT -#define ENABLE_PUB_KEY_TYPE_OOB -#define ENABLE_AUTH_TYPE_STATIC_OOB -#define ENABLE_AUTH_TYPE_OUTPUT_OOB +//#define ENABLE_PUB_KEY_TYPE_OOB +//#define ENABLE_AUTH_TYPE_STATIC_OOB +//#define ENABLE_AUTH_TYPE_OUTPUT_OOB //#define ENABLE_AUTH_TYPE_INPUT_OOB /* Static OOB Configurations */ @@ -401,16 +378,18 @@ For STMicroelectronics : it is 0x0030 */ #endif /* -* Different features supported by BlueNRG-Mesh. Uncomment according to application. +* Different features supported by BLE-Mesh. Uncomment according to application. * Low power feature enabled node do not support other features. * Do not define any other feature if Low Power feature is defined */ #define ENABLE_RELAY_FEATURE #define ENABLE_PROXY_FEATURE #define ENABLE_FRIEND_FEATURE -/* #define ENABLE_LOW_POWER_FEATURE */ - - +//#define ENABLE_LOW_POWER_FEATURE +#ifdef CLIENT +#define ENABLE_PROVISIONER_FEATURE +#endif + /* * Friend node receive window size is fixed at 50 ms */ @@ -427,12 +406,16 @@ For STMicroelectronics : it is 0x0030 */ * Number of Low power nodes that can be associated with Friend node * varies from 1 to 10 */ -#define FN_NO_OF_LPNS 2U +#define FN_NO_OF_LPNS 6U /* * For prioritizing friendship offer with good RSSI link * varies from 0 to 3 * Ref @Mesh_v1.0 +* 0 -> 1 +* 1 -> 1.5 +* 2 -> 2 +* 3 -> 2.5 */ #define LPN_RSSI_FACTOR_LEVEL 1U @@ -440,13 +423,24 @@ For STMicroelectronics : it is 0x0030 */ * For prioritizing friendship offer with good receive window factor * varies from 0 to 3 * Ref @Mesh_v1.0 +* 0 -> 1 +* 1 -> 1.5 +* 2 -> 2 +* 3 -> 2.5 */ #define LPN_RECIVE_WINDOW_FACTOR_LEVEL 1U /* -* Minimum packets queue size required +* Minimum packets queue size required by Low Power node * varies from 1 to 7 * Ref @Mesh_v1.0 +* 1 -> 2 +* 2 -> 4 +* 3 -> 8 +* 4 -> 16 +* 5 -> 32 +* 6 -> 64 +* 7 -> 128 */ #define LPN_MINIMUM_QUEUE_SIZE_LOG 2U @@ -454,6 +448,8 @@ For STMicroelectronics : it is 0x0030 */ * (unit ms) * varies from 0x0A to 0xFF * Ref @Mesh_v1.0 +* 0x0A -> 10ms +* 0xFF -> 255ms */ #define LPN_RECEIVE_DELAY 150U @@ -461,15 +457,19 @@ For STMicroelectronics : it is 0x0030 */ * Poll timeout value after which friendship cease to exist (unit 100ms) * varies from 0x00000A to 0x34BBFF * Ref @Mesh_v1.0 +* 0x00000A -> 1 second +* 0x34BBFF -> 96 hours */ #define LPN_POLL_TIMEOUT 2000U /* * Maximum receive window size acceptable to low power node (unit ms) -* varies from 10 to 255 +* varies from 0x0A to 0xFF * Ref @Mesh_v1.0 +* 0x0A -> 10ms +* 0xFF -> 255ms */ -#define LPN_RECEIVE_WINDOW_SIZE 55U +#define LPN_RECEIVE_WINDOW_SIZE 255U/*55U*/ /* * Minimum friend's subscription list size capability required by lpn @@ -481,12 +481,14 @@ For STMicroelectronics : it is 0x0030 */ /* * Frequency at which low power node would send friend request (unit 100ms) * varies from 0 to 255 +* 100 -> 10s */ #define LPN_FRIEND_REQUEST_FREQUENCY 50U /* * Frequency at which low power node would poll friend node (unit 100ms) * should be less than poll timeout +* 100 -> 10s */ #define LPN_FRIEND_POLL_FREQUENCY 25U @@ -502,6 +504,10 @@ For STMicroelectronics : it is 0x0030 */ */ #define LPN_NO_OF_RETRIES 10U +/* +* Maximum address list size buffer in Friend Subscription List Add Message is 10 +*/ + /* * Enable or disable neighbor table @@ -533,14 +539,14 @@ For STMicroelectronics : it is 0x0030 */ * 0: Disable neighbor table update with unprovisioned device beacon * 1: Enable neighbor table update with unprovisioned device beacon */ -#define NEIGHBOR_UNPRVND_DEV_BEACON_NTU 0U +#define NEIGHBOR_UNPRVND_DEV_BEACON_NTU 1U /* * Enable/disable neighbor table update with secure network beacon * 0: Disable neighbor table update with secure network beacon * 1: Enable neighbor table update with secure network beacon */ -#define NEIGHBOR_SECURE_NET_BEACON_NTU 1U +#define NEIGHBOR_SECURE_NET_BEACON_NTU 0U /* * Enable/disable neighbor table update with TTL 0 message @@ -548,7 +554,68 @@ For STMicroelectronics : it is 0x0030 */ * 1: Enable neighbor table update with messages with 0 TTL * 2: Enable neighbor table update with messages with any TTL */ -#define NEIGHBOR_MSG_TTLX_NTU 1U +#define NEIGHBOR_MSG_TTLX_NTU 0U + +/******************************************************************************* +*** Following section helps to configure the LEDs of Application of Mesh *********** +*******************************************************************************/ + +#if defined USE_STM32WBXX_NUCLEO || defined USE_STM32WBXX_USB_DONGLE + #define SINGLE_LED PWM4 + #define COOL_LED PWM0 + #define WARM_LED PWM1 + #define RED_LED PWM2 + #define GREEN_LED PWM3 + #define BLUE_LED PWM4 +#endif + +/* Following Macro helps to know if the Fixed functions are needed or not + DO NOT change or add any space at the end of the file */ +#if defined (ENABLE_GENERIC_MODEL_SERVER_ONOFF) \ + || defined (ENABLE_GENERIC_MODEL_SERVER_LEVEL) \ + || defined (ENABLE_GENERIC_MODEL_SERVER_POWER_ONOFF) \ + || defined (ENABLE_GENERIC_MODEL_SERVER_POWER_ONOFF_SETUP) \ + || defined (ENABLE_GENERIC_MODEL_SERVER_DEFAULT_TRANSITION_TIME) \ + || defined (ENABLE_GENERIC_MODEL_SERVER_POWER_LEVEL) \ + || defined (ENABLE_GENERIC_MODEL_SERVER_POWER_LEVEL_SETUP) \ + || defined (ENABLE_GENERIC_MODEL_SERVER_BATTERY) \ + || defined (ENABLE_GENERIC_MODEL_SERVER_LOCATION) \ + || defined (ENABLE_GENERIC_MODEL_SERVER_LOCATION_SETUP) \ + || defined (ENABLE_GENERIC_MODEL_SERVER_ADMIN_PROPERTY) \ + || defined (ENABLE_GENERIC_MODEL_SERVER_MANUFACTURER_PROPERTY) \ + || defined (ENABLE_GENERIC_MODEL_SERVER_USER_PROPERTY) \ + || defined (ENABLE_GENERIC_MODEL_SERVER_CLIENT_PROPERTY) + #define ENABLE_GENERIC_MODEL_SERVER + #define GENERIC_SERVER_MODEL_ADD_CONFIGURATION + +#endif + + +/* Following Macro helps to know if the Fixed functions are needed or not + DO NOT change or add any space at the end of the file */ +#if defined(ENABLE_LIGHT_MODEL_SERVER_LIGHTNESS) \ + || defined(ENABLE_LIGHT_MODEL_SERVER_LIGHTNESS_SETUP) \ + || defined(ENABLE_LIGHT_MODEL_SERVER_CTL) \ + || defined(ENABLE_LIGHT_MODEL_SERVER_CTL_SETUP) \ + || defined(ENABLE_LIGHT_MODEL_SERVER_CTL_TEMPERATURE) \ + || defined(ENABLE_LIGHT_MODEL_SERVER_HSL) \ + || defined(ENABLE_LIGHT_MODEL_SERVER_HSL_SETUP) \ + || defined(ENABLE_LIGHT_MODEL_SERVER_HSL_HUE) \ + || defined(ENABLE_LIGHT_MODEL_SERVER_HSL_SATURATION) \ + || defined(ENABLE_LIGHT_MODEL_SERVER_LC) \ + || defined(ENABLE_LIGHT_MODEL_SERVER_LC_SETUP) \ + || defined(ENABLE_LIGHT_MODEL_SERVER_XYL) \ + || defined(ENABLE_LIGHT_MODEL_SERVER_XYL_SETUP) + #define ENABLE_LIGHT_MODEL_SERVER + #define LIGHT_SERVER_MODEL_ADD_CONFIGURATION +#endif + +#if defined(ENABLE_TIME_MODEL_SERVER) \ + || defined(ENABLE_TIME_MODEL_SERVER_SETUP)\ + || defined(ENABLE_SCENE_MODEL_SERVER)\ + || defined(ENABLE_SCENE_MODEL_SERVER_SETUP) + #define ENABLE_TIME_SCENE_MODEL_SERVER +#endif /* Exported variables -------------------------------------------------------*/ /* Exported Functions Prototypes ---------------------------------------------*/ |