diff options
Diffstat (limited to 'Projects/STM32WB5MM-DK/Applications/BLE/BLE_HeartRate/Core/Src/app_entry.c')
| -rw-r--r-- | Projects/STM32WB5MM-DK/Applications/BLE/BLE_HeartRate/Core/Src/app_entry.c | 243 |
1 files changed, 195 insertions, 48 deletions
diff --git a/Projects/STM32WB5MM-DK/Applications/BLE/BLE_HeartRate/Core/Src/app_entry.c b/Projects/STM32WB5MM-DK/Applications/BLE/BLE_HeartRate/Core/Src/app_entry.c index 98fb79035..95cfcced7 100644 --- a/Projects/STM32WB5MM-DK/Applications/BLE/BLE_HeartRate/Core/Src/app_entry.c +++ b/Projects/STM32WB5MM-DK/Applications/BLE/BLE_HeartRate/Core/Src/app_entry.c @@ -1,21 +1,21 @@ /* USER CODE BEGIN Header */ /** - ****************************************************************************** - * File Name : app_entry.c - * Description : Entry application source file for STM32WPAN Middleware - ****************************************************************************** + ****************************************************************************** + * @file app_entry.c + * @author MCD Application Team + * @brief Entry point of the Application + ****************************************************************************** * @attention * - * <h2><center>© Copyright (c) 2021 STMicroelectronics. - * All rights reserved.</center></h2> + * Copyright (c) 2021 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under Ultimate Liberty license - * SLA0044, the "License"; You may not use this file except in compliance with - * the License. You may obtain a copy of the License at: - * www.st.com/SLA0044 + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * - ****************************************************************************** - */ + ****************************************************************************** + */ /* USER CODE END Header */ /* Includes ------------------------------------------------------------------*/ @@ -29,6 +29,8 @@ #include "shci_tl.h" #include "stm32_lpm.h" #include "app_debug.h" +#include "dbg_trace.h" +#include "shci.h" #include "otp.h" /* Private includes -----------------------------------------------------------*/ @@ -66,16 +68,18 @@ PLACE_IN_SECTION("MB_MEM2") ALIGN(4) static uint8_t BleSpareEvtBuffer[sizeof(TL_ /* Private functions prototypes-----------------------------------------------*/ static void Config_HSE(void); static void Reset_Device( void ); +#if ( CFG_HW_RESET_BY_FW == 1 ) static void Reset_IPCC( void ); static void Reset_BackupDomain( void ); +#endif /* CFG_HW_RESET_BY_FW */ static void System_Init( void ); static void SystemPower_Config( void ); static void appe_Tl_Init( void ); static void APPE_SysStatusNot( SHCI_TL_CmdStatus_t status ); static void APPE_SysUserEvtRx( void * pPayload ); -static void Init_Exti( void ); +static void APPE_SysEvtReadyProcessing( void * pPayload ); +static void APPE_SysEvtError( void * pPayload); static void Init_Rtc( void ); -static void Init_Smps( void ); /* USER CODE BEGIN PFP */ static void Button_Init( void ); @@ -154,6 +158,33 @@ void MX_APPE_Init( void ) /* USER CODE END APPE_Init_2 */ return; } + +void Init_Smps( void ) +{ +#if (CFG_USE_SMPS != 0) + /** + * Configure and enable SMPS + * + * The SMPS configuration is not yet supported by CubeMx + * when SMPS output voltage is set to 1.4V, the RF output power is limited to 3.7dBm + * the SMPS output voltage shall be increased for higher RF output power + */ + LL_PWR_SMPS_SetStartupCurrent(LL_PWR_SMPS_STARTUP_CURRENT_80MA); + LL_PWR_SMPS_SetOutputVoltageLevel(LL_PWR_SMPS_OUTPUT_VOLTAGE_1V40); + LL_PWR_SMPS_Enable(); +#endif + + return; +} + +void Init_Exti( void ) +{ + /* Enable IPCC(36), HSEM(38) wakeup interrupts on CPU1 */ + LL_EXTI_EnableIT_32_63( LL_EXTI_LINE_36 & LL_EXTI_LINE_38 ); + + return; +} + /* USER CODE BEGIN FD */ void LED_Deinit(void) @@ -199,11 +230,12 @@ static void Reset_Device( void ) Reset_BackupDomain(); Reset_IPCC(); -#endif +#endif /* CFG_HW_RESET_BY_FW */ return; } +#if ( CFG_HW_RESET_BY_FW == 1 ) static void Reset_BackupDomain( void ) { if ((LL_RCC_IsActiveFlag_PINRST() != FALSE) && (LL_RCC_IsActiveFlag_SFTRST() == FALSE)) @@ -259,6 +291,7 @@ static void Reset_IPCC( void ) return; } +#endif /* CFG_HW_RESET_BY_FW */ static void Config_HSE(void) { @@ -287,33 +320,6 @@ static void System_Init( void ) return; } -static void Init_Smps( void ) -{ -#if (CFG_USE_SMPS != 0) - /** - * Configure and enable SMPS - * - * The SMPS configuration is not yet supported by CubeMx - * when SMPS output voltage is set to 1.4V, the RF output power is limited to 3.7dBm - * the SMPS output voltage shall be increased for higher RF output power - */ - LL_PWR_SMPS_SetStartupCurrent(LL_PWR_SMPS_STARTUP_CURRENT_80MA); - LL_PWR_SMPS_SetOutputVoltageLevel(LL_PWR_SMPS_OUTPUT_VOLTAGE_1V40); - LL_PWR_SMPS_Enable(); -#endif - - return; -} - -static void Init_Exti( void ) -{ - /**< Disable all wakeup interrupt on CPU1 except IPCC(36), HSEM(38) */ - LL_EXTI_DisableIT_0_31(~0); - LL_EXTI_DisableIT_32_63( (~0) & (~(LL_EXTI_LINE_36 | LL_EXTI_LINE_38)) ); - - return; -} - static void Init_Rtc( void ) { /* Disable RTC registers write protection */ @@ -326,6 +332,7 @@ static void Init_Rtc( void ) return; } + /** * @brief Configure the system for power optimization * @@ -398,12 +405,151 @@ static void APPE_SysStatusNot( SHCI_TL_CmdStatus_t status ) */ static void APPE_SysUserEvtRx( void * pPayload ) { - UNUSED(pPayload); - /* Traces channel initialization */ - APPD_EnableCPU2( ); + TL_AsynchEvt_t *p_sys_event; + WirelessFwInfo_t WirelessInfo; + + p_sys_event = (TL_AsynchEvt_t*)(((tSHCI_UserEvtRxParam*)pPayload)->pckt->evtserial.evt.payload); + + /* Read the firmware version of both the wireless firmware and the FUS */ + SHCI_GetWirelessFwInfo( &WirelessInfo ); + APP_DBG_MSG("Wireless Firmware version %d.%d.%d\n", WirelessInfo.VersionMajor, WirelessInfo.VersionMinor, WirelessInfo.VersionSub); + APP_DBG_MSG("Wireless Firmware build %d\n", WirelessInfo.VersionReleaseType); + APP_DBG_MSG("FUS version %d.%d.%d\n\n", WirelessInfo.FusVersionMajor, WirelessInfo.FusVersionMinor, WirelessInfo.FusVersionSub); + + switch(p_sys_event->subevtcode) + { + case SHCI_SUB_EVT_CODE_READY: + APPE_SysEvtReadyProcessing(pPayload); + break; + + case SHCI_SUB_EVT_ERROR_NOTIF: + APPE_SysEvtError(pPayload); + break; + + case SHCI_SUB_EVT_BLE_NVM_RAM_UPDATE: + APP_DBG_MSG("-- BLE NVM RAM HAS BEEN UPDATED BY CMO+ \n"); + APP_DBG_MSG("SHCI_SUB_EVT_BLE_NVM_RAM_UPDATE : StartAddress = %lx , Size = %ld\n", + ((SHCI_C2_BleNvmRamUpdate_Evt_t*)p_sys_event->payload)->StartAddress, + ((SHCI_C2_BleNvmRamUpdate_Evt_t*)p_sys_event->payload)->Size); + break; + + case SHCI_SUB_EVT_NVM_START_WRITE: + APP_DBG_MSG("SHCI_SUB_EVT_NVM_START_WRITE : NumberOfWords = %ld\n", + ((SHCI_C2_NvmStartWrite_Evt_t*)p_sys_event->payload)->NumberOfWords); + break; + + case SHCI_SUB_EVT_NVM_END_WRITE: + APP_DBG_MSG("SHCI_SUB_EVT_NVM_END_WRITE\n"); + break; + + case SHCI_SUB_EVT_NVM_START_ERASE: + APP_DBG_MSG("SHCI_SUB_EVT_NVM_START_ERASE : NumberOfSectors = %ld\n", + ((SHCI_C2_NvmStartErase_Evt_t*)p_sys_event->payload)->NumberOfSectors); + break; + + case SHCI_SUB_EVT_NVM_END_ERASE: + APP_DBG_MSG("SHCI_SUB_EVT_NVM_END_ERASE\n"); + break; + + default: + break; + } + + return; +} + +/** + * @brief Notify a system error coming from the M0 firmware + * @param ErrorCode : errorCode detected by the M0 firmware + * + * @retval None + */ +static void APPE_SysEvtError( void * pPayload) +{ + TL_AsynchEvt_t *p_sys_event; + SCHI_SystemErrCode_t *p_sys_error_code; + + p_sys_event = (TL_AsynchEvt_t*)(((tSHCI_UserEvtRxParam*)pPayload)->pckt->evtserial.evt.payload); + p_sys_error_code = (SCHI_SystemErrCode_t*) p_sys_event->payload; + + APP_DBG_MSG("SHCI_SUB_EVT_ERROR_NOTIF WITH REASON %x \n",(*p_sys_error_code)); + + if ((*p_sys_error_code) == ERR_BLE_INIT) + { + /* Error during BLE stack initialization */ + APP_DBG_MSG("SHCI_SUB_EVT_ERROR_NOTIF WITH REASON - ERR_BLE_INIT \n"); + } + else + { + APP_DBG_MSG("SHCI_SUB_EVT_ERROR_NOTIF WITH REASON - BLE ERROR \n"); + } + return; +} + +static void APPE_SysEvtReadyProcessing( void * pPayload ) +{ + TL_AsynchEvt_t *p_sys_event; + SHCI_C2_Ready_Evt_t *p_sys_ready_event; + + SHCI_C2_CONFIG_Cmd_Param_t config_param = {0}; + uint32_t RevisionID=0; + + p_sys_event = (TL_AsynchEvt_t*)(((tSHCI_UserEvtRxParam*)pPayload)->pckt->evtserial.evt.payload); + p_sys_ready_event = (SHCI_C2_Ready_Evt_t*) p_sys_event->payload; + + if(p_sys_ready_event->sysevt_ready_rsp == WIRELESS_FW_RUNNING) + { + /** + * The wireless firmware is running on the CPU2 + */ + APP_DBG_MSG("SHCI_SUB_EVT_CODE_READY - WIRELESS_FW_RUNNING \n"); + + /* Traces channel initialization */ + APPD_EnableCPU2( ); + + /* Enable all events Notification */ + config_param.PayloadCmdSize = SHCI_C2_CONFIG_PAYLOAD_CMD_SIZE; + config_param.EvtMask1 = SHCI_C2_CONFIG_EVTMASK1_BIT0_ERROR_NOTIF_ENABLE + + SHCI_C2_CONFIG_EVTMASK1_BIT1_BLE_NVM_RAM_UPDATE_ENABLE + + SHCI_C2_CONFIG_EVTMASK1_BIT2_THREAD_NVM_RAM_UPDATE_ENABLE + + SHCI_C2_CONFIG_EVTMASK1_BIT3_NVM_START_WRITE_ENABLE + + SHCI_C2_CONFIG_EVTMASK1_BIT4_NVM_END_WRITE_ENABLE + + SHCI_C2_CONFIG_EVTMASK1_BIT5_NVM_START_ERASE_ENABLE + + SHCI_C2_CONFIG_EVTMASK1_BIT6_NVM_END_ERASE_ENABLE; + + /* Read revision identifier */ + /** + * @brief Return the device revision identifier + * @note This field indicates the revision of the device. + * @rmtoll DBGMCU_IDCODE REV_ID LL_DBGMCU_GetRevisionID + * @retval Values between Min_Data=0x00 and Max_Data=0xFFFF + */ + RevisionID = LL_DBGMCU_GetRevisionID(); + + APP_DBG_MSG("DBGMCU_GetRevisionID= %lx \n\n", RevisionID); + + config_param.RevisionID = RevisionID; + (void)SHCI_C2_Config(&config_param); + + APP_BLE_Init( ); + UTIL_LPM_SetOffMode(1U << CFG_LPM_APP, UTIL_LPM_ENABLE); + } + else if (p_sys_ready_event->sysevt_ready_rsp == FUS_FW_RUNNING) + { + /** + * The FUS firmware is running on the CPU2 + * In the scope of this application, there should be no case when we get here + */ + APP_DBG_MSG("SHCI_SUB_EVT_CODE_READY - FUS_FW_RUNNING \n"); + + /* The packet shall not be released as this is not supported by the FUS */ + ((tSHCI_UserEvtRxParam*)pPayload)->status = SHCI_TL_UserEventFlow_Disable; + } + else + { + APP_DBG_MSG("SHCI_SUB_EVT_CODE_READY - UNEXPECTED CASE \n"); + } - APP_BLE_Init( ); - UTIL_LPM_SetOffMode(1U << CFG_LPM_APP, UTIL_LPM_ENABLE); return; } @@ -487,6 +633,8 @@ void UTIL_SEQ_Idle( void ) void UTIL_SEQ_EvtIdle( UTIL_SEQ_bm_t task_id_bm, UTIL_SEQ_bm_t evt_waited_bm ) { UTIL_SEQ_Run( UTIL_SEQ_DEFAULT ); + + return; } void shci_notify_asynch_evt(void* pdata) @@ -528,4 +676,3 @@ void HAL_GPIO_EXTI_Callback( uint16_t GPIO_Pin ) } /* USER CODE END FD_WRAP_FUNCTIONS */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |